Windows vista Media Center will not download the new configuration sealing more up-to-date for my region?

Similar Questions

• Windows 7 Media Center will not download the new guide listings

  Hello

  I am really frustrated. WMC will not download the new guide listings and I tried all the patches that are supposed to be that I found in this forum. I also tried the system restore, which did not fix the problem. Obviously the problem is not affected by the restore program.

  I was able to determine that there is some kind of corruption of the WMC files that Windows 7 can not solve (according to the event log).

  I'm a bit exasperated at the tenacity of this problem. Y at - it a reliable fix or I need to reinstall Windows 7?

  Thank you

  Hello Long777,

  You have the update for Windows Media Center installed?

  Click on the article below:
  KB Article ID: 2284742 -October 2010 Cumulative Update for Windows Media Center in Windows 7

  You may be able to force a manual update. Do an update (weekly) to TV Guide through the menu system.

  If this does not help, you might want to ask your specific question to http://.www.thegreenbutton.com \forums

  I hope this helps.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows vista media center does not I can uninstall and reinstall?

  Windows vista Media Center has been installed, but will not respond. How can I fix this problem?

  Hello

  You cannot uninstall or reinstall

  Try this:

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228#appliesTo

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Media Center will not recognize the internal TV tuner from Sony

  Original svl24 title: sony + tv tuner + multimedia
  Win7 Media center won't recognize the internal tv tuner Sony (Bravia). The installation program rises "tv tuner" not found. What is interesting, is that Sony SVL24 can detect and be able to use the TV without Media center option.  Anyone have a solution?

  you have a link to your model of machine somewhere on the Sony site? the info I have
  found the third sites indicates that there is no accessible software
  TV for Media Center tuner. This information shows that you can watch TV without the
  computer is turned on.
   
  To me, this indicates that the TV tuner is the type that you would have in normal
  only TV (which is not capable of Media Center) support.
   
  You can probably add a USB tuner to this all-in-one and watch/record TV via
  Media Center, but it doesn't look like the 'tuner' in your computer is a
  "computer" tuner
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Windows Media Center will not download updates to the Guide. Netflix and Internet TV options do not appear on the menu screen.

  I tried to configure Media Center for Internet TV and Netflix. I have Setup several times and attempted to manually download the updates. So far, neither option appeared on the menu screen and I repeatedly received an error message when you try to download updates to the guide that directs me to check the update log. I find the event log, and that's what he said:

  * 10:44:58 - test of internet connection. 10:45:01 - established connection. 10:45:02 - directory of recovery. 10:45:03 - directory of recovery. 10:45:04 - directory of recovery. 10:45:05 - Directory of recovery.

  * 10:45:05 - cannot retrieve the directory (error: invalid security token.)

  * 10:45:05 - SportsSchedule the package is not available. 10:45:05 - SportsV2 the package is not available. 10:45:05 - ClientUpdate the package is not available. 10:45:05 - NetTV package is not available. 10:45:05 - MCESpotlight the package is not available. 10:45:05 - MCEClientUX the package is not available. 10:45:05 - broadband package is not available. 10:45:06 - errors during the last update. 10:45:06 - retries at 2009-10-25 04:54:37.

  Also, when I tried to contact support by email and has been asked to enter my product ID number to verify the activation, I was told it was not valid. I repeatedly entered it exactly as stated on the page of the system. I also activated the software certified on the same page of the system.

  Any help would be appreciated because I would really like to be able to use these features.

  Thank you.

  I had this same problem. That's what I did which appeared to fix (not sure if that fix or if it sets just itself). I ran the mcupdate.exe file located in the C:\windows\ehome\ directory (or some windows player is on). Yet once again, I'm not sure if this corrects the problem, or if it randomly determines.

• Windows vista Media Player will not play mp3 or wma files

  my windows vista Ultimate 64 player will not play any of my wma or mp3 files. said that I did not have the codex of right. but wma and wmv are windows. What's new?

  Hi rpwerner,

  Please use the forum for Support of Vista,

  This is a codec package from Microsoft you want to download to see if it will be useful.  Also, try to update your Windows Media Player and Windows Update to get the latest version of the codec required to play the type of media.

  You can also use your favorite search engine to look for codec packs available on the web to help you read the content.

  NOTE:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this helps,

  Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista Media Center does not display the subtitles TV

  I just started to use Media Center to Vista Home Premium and I need help.
  I googled but have not found my solution.

  Fortunately, my HDTV (Samsung) shows the legends on the captioned.
  When I go the same path of VMC, I don't have captions.
  Where is the 'button' to turn on / off?
  It is a function of the tuner (digital tuner Hauppauge HVR-2200)?

  Thanks for your help, but I finally got the legends of work.

  It seems that the solution is in the Windows Media Center TV Pack 2008 (x 86).
  I was provided by my HTPC seller and applied the 2 patches that came with it.
  The old system was WMC version: 6.0.6001.18000 (longhorn_rtm080118-1840).
  After installation, the version is 6.1.1000.18273 (longhorn_mc_dev (wmbla). 080702-2208).

  Now my menus show the items people asked me access but was not when indicated.

  It works with the same material: HTPC HDMI - HDMI-> receiver--> TV

  In fact, the legend of WMC are much more clean and elegant than those of Samsung TV.

  Is there a way of positioning, as their name suggests, under - titles?
  They appear in the middle and slightly below the center of the screen, rather than the bottom of the screen.

  Kind regards

  N

• Windows 8 Media Center will not install, get useless message error "something went wrong".

  I have the version upgrade of Windows 8 Pro and can not install Media Center.

  I signed up for a key that was sent to me and past the initial check whenever I try to install it.

  I check the checkbox for the conditions once the key is successfully verified.

  I then get the bar of green progression for the verification of updates and after about 30 seconds, I get the error message 'something went wrong '.

  Hello

  This is how I solved this problem.
  I have notised that a file with the name ehome. has been "created" in the windows folder.
  This seems to block the creation of the eHome folder, where the Media Center should install.
  Remove the ehome. file, create the eHome directory and try again to install the Media Center.
  Worked for me on two different PCs.
  See you soon
  M

• Vista update KB968930 will not, download the 80007000D error code

  Always get the 80007000D error code

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

• my computer will not download the new updates?

  my computer has a yellow shield downwards in the tool bar saying there are updates for my computer, but when I try to install it does not finish the job and told me that it was not installed. I tried this about 10 times please help me. and maybe this make my computer faster then it is now?

  my computer has a yellow shield downwards in the tool bar saying there are updates for my computer, but when I try to install it does not finish the job and told me that it was not installed. I tried this about 10 times please help me. and maybe this make my computer faster then it is now?

  Last question first: No.
   
  The rest - it looks like that you may be infested/infected with something.  We're going to clean up some things.  Follow this advice as given, do not deviate or ignore anything just because you might have done something similar or even exactly the same thing a few minutes before on your own.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner. Remove everything it finds.

  Reset.

  Start an elevated command prompt.

  1. Run the following commands pressing on enter after each line:
     
     net stop wuauserv
     CD %SystemRoot%\System32
     Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
     net start wuauserv

  2. Reset

  * Important * When you do this, the following problems occur:

  • Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.
  • When you remove the Software Distribution folder, your download history is deleted.
  • If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  
  * Note * if the problem is resolved and you can successfully download and install the updates, you can delete the directory SoftwareDistribution.old to recover disk space.

  Use this FixIt:
  How to get the latest version of the Windows Update Agent

  Reset.

  Save components WU:

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:
     regsvr32 Jscript.dll
     regsvr32 c:\windows\system32\wuapi.dll
     regsvr32 c:\windows\system32\wuaueng.dll

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Visit the web page of http://windowsupdate.microsoft.com/ , CUSTOM and install all updates not optional manually (no hardware updates - never - please.)

• Vista Media Center will play is no longer the DVD or TV?

  Windows vista media Center will not play TV, although he did it again and it will not read the DVD more, but there again. The answers would be gratefull.

  OK, forget the TV, I have now it works well.

  But I still can't read the DVD.

  After having put in a disk, it makes a funny sound as if she is looking for the disc backwards & fordwards permanently. After some time when nothing is happening and I'm going to eject the disc, a popup said cannot detect a disk.

  This happens on the plant as well as those burned discs.

  What happens if you try to play outside of the WMC?
  If it is it may be a disk problem.

• Windows Media Center - I get an error message indicating that Windows Media Center will not open

  Hello

  Quite simply, I get an error message indicating that Windows Media Center will not open. I tried the following: a system restore to a date where library worked with no success. I have run the System File Checker (sfc/runnow} wich ligate without flaws. Finally, I deleted the file mediacenterdatastore which has also no effect. The last thing I want to do is reinstall my operating system, once again, so has anyone out there have any more ways to fix this error... Help! Thanks in advance

  Robert,
  Thanks for reporting the good news. Enjoy!
   
  Saturday, June 19, 2010, 08:16:25 + 0000, bleedingwolf wrote:
   
  >
  >
  > Hi Barb,
  >
  > Windows 7 is now upwards and being run., you suggested that I would have problems with Netgear drivers that indeed I did. I have download the drivers for W7 on the Netgear site, but the wizard would not complete the entire upward. However, I thought would try to use the original installation, (vista compatible) and to my surprise and my pleasure worked.
  >
  > Cordially.
  >
  > Robert.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Window Media Center will not configure my Xbox says that there is an error in moan by train

  Window Media Center will not configure my Xbox says that there is an error in moan by train

  Hello

  What is you get the exact error message?

  Please follow the steps mentioned in the links below.

  Set up a Windows Media Center Extender device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Windows-Media-Center-Extender-device

  You tried to set up your console Xbox 360 as a Media Center Extender, but the installer is not started

  http://support.Microsoft.com/kb/916180

  http://support.Xbox.com/en-us/Xbox-360/audio-video-Setup-and-use/Windows-Media-Center

  http://support.Xbox.com/en-us/Xbox-360/audio-video-Setup-and-use/Media-Center-FAQ

• Windows Media Center will not stop to come when I click on my user name

  Windows Media Center will not stop when I click on my username to come...

  Hello
  Try to create a new user account and transfer the files from the user account damaged to the new user account
   
  http://Windows.Microsoft.com/en-CA/Windows-Vista/fix-a-corrupted-user-profile

• Qosmio G50 - cannot install the FM Tuner in Windows Vista Media Center?

  Can someone help me get the most out of Windows Vista media center with my new Qosmio G50.

  There is a tuner inside this laptop and I have the antenna and its plugged in. The drivers all seem to be installed but WMC tells me that I don't have the hardware to run FM stations and I can't make it work. Also, I can't record library but although I can't watch TV no problem at all.

  Someone out there have the answer?

  Hello

  Are you sure that your equipped G50 FM tuner to 100%?

  As I know a few models of G50 has been equipped with a tuner TV with antenna TV port that allows to connect a coaxial cable to this port to watch a TV program and then save.
  But as I said earlier, this feature is not included with all models of G50.

  Sorry, but I didn't find any info regarding the FM tuner.