Windows Vista's Aero theme will not work after you install a major update and reboot into Windows Automatic Update, can I fix?

Similar Questions

• print DigitalPersona finger scanning does not work after you install the recommended updates

  My impression of digitalpersona finger scanning does not work after you install the updates recommended on my dell Vista

  Hello

  1. do you have an error message?
  2. are you referring to the print scan hardware or software scan print that was supplied with the device?

  Method 1:
  I suggest you to update the software DigitalPersona from the link below https://www.digitalpersona.com/support/downloads/

• The Explorer will not work after you install Office Jet 4500

  Hello

  Can someone tell me why my windows Explorer does not work after installation of my printer Office Jet 4500 wireless?  I am currently using windows vista.

  Thank you

  Go to a command prompt.

  Type sfc/scannow and allow to run the System File Checker. Restart your PC to see if Windows Explorer works.

• Internet Explorer does not work after you install the kb2761451 update

  Original title: I downloaded the update and now Internet security security update kb2761451 explore does not open.  So I deleted it and Explorer opens.  This update is listed as important.  What should I do?

  The Explorer is 9.

  Hello

  Thanks for posting the question in the Microsoft Community!

  Internet Explorer stops working after the update kb2761451 is installed.

  The problem may occur if the updated components are corrupted.

  I suggest you follow the steps mentioned below:

  Method 1: Of reset Windows Update components

   

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: run the Update of the system analysis tool

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• HP Envy M6 Simplepass finger reader will not work after you uninstall Norton internet security.

  I've seen a few problems to do with the drive of finger and Norton internet security, but I couldn't find a solution to the problem. I looked on biometric devices and it says "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »
  
  I've been on the re HP Recovery section - install drivers and applications and reinstalled the HP Simplepass program, but I do not uninstall before that I did and that's maybe why it did not work.
  
  What to do to make the finger drive working again?
  
  Kind regards
  
  Maddie

  Ok. So I got a new laptop that has a fingerprint sensor. I opened the Recovery Manager and see that there are TWO pieces of software that need to be installed/reinstalled.
  (1) the validity of the pilot sensor of fingerprint in the drivers section.
  (2) the SimplePass software in the software section.
  
  Most of the drivers and software in the Recovery Manager do not need to be uninstalled first - the installation package should do this automatically.
  
  If you have not already done so, install the driver of validity using Recovery Manager and restart your computer.

• Google chrome will not work after you disconnect it or shut down the computer

  After you download it again, it works fine until I disconnect again. Any idea what is the problem?

  The Feedback forum is not his place for something else questons or comments on the Microsoft Answers site.  I moved your post on the forum of "Programs" of Windows.  You must always mention your version of Windows when you post.

  Answers forums are on Microsoft products.  Ask questions of Chrome in Chrome forums that Google runs.  http://productforums.Google.com/Forum/

• Re: Portege R500: controller button does not work after you install the update

  After you have installed the latest version of Toshiba Value added Package, the two buttons (toshiba assist, and backlight power) do not work properly: they open instead a window of Firefox.

  I guess there is something to configure in the section "Optimizing" Toshiba Assist.
  When I open the program "Toshiba buttons functions" (sorry for the puny, Spanish translation, it is called: "functions of Toshiba botones") all entries are empty and I have to enter the Url of the program supposed to turn off the backlight of the screen of my LCD...
  I have no idea where to find this executable.

  Can someone help me?

  Why you n t use the OS restore option?
  The operating system supports the option of system restore and this helps to put the system in the previous point.

  Check, maybe it helps to get the old version of the Toshiba Package Value added.

• I have a problem with the computer work is not correctly after you install the KB2753842 update.

  This update of windows has been installed automatically today (22/12/2012) as the (successful with this date) shows on the Page update.  Since that it has been installed, the computer is constantly read/write on the disc at 100% at all times (i.e. non-stop).  Performance is significantly degraded.  I rebooted several times, whenever the system shows the updates are being configured on tap-dwon and commissioning.  I want to reinstall the update because I think that it was not successful, even if the display update Page shows successful installation.  When I try to find and remove the update under the Panel of control-> program and features-> Windows updates, this update is NOT displayed (latest updates are 13/12/2012).  How can I remove and reinstall this security update?  It is a BIG problem at the moment.  Computer is almost non-functional.  Thnx.

  Original title: update security for windows (KB2753842)

  Nirmal S, thank you.  System Restore did the trick.  I restored prior update checkpoint and then the system automatically re-installed the latest update (which is one I had a problem with).  Problem solved!  My computer working again 'normally '.

  Also, I learned a few new things about the updates and restorations, so...

  Bravo for Nirmal S!

  Kind regards...

• Computer will not work after you download service pack 2 for Windows Xp

  Whenever I have download Xp SP2, my computer keeps restarting over and over again. What should I do to fix this?

  Take a look on: http://winhlp.com/node/125#Boot_or_shutdown_problems_after_Service_Pack_2_installation

  Are you aware that SP3 is available?
  TaurArian [MVP] 2005-2010 - Update Services

• Help of blackBerry Smartphones that my curve will not work after I installed an update

  I recently installed an update for my curve. Since then it keeps loading then a white screen saying "error, press any key to return to the configuration of pre" then it turn off then repeats the process again. " I need help because phone is important to my work. Thanks for any help.

  I tried keeping on the battery for 5 minutes.

  Hi scrack

  So if it's during a software device, you can try a fresh reload of your device software to exclude any corrupt device OS. Have a look at how to perform a clean reload of the smart phone BlackBerry using BlackBerry desktop software.

  KB11320

  All you need a PC with Internet connection and USB cable.

  Try it and tell us.

  Prince

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.

• USB does not work after you install the utility on Satellite A200 Intel chipsets

  Hello.
  I installed Win XP Pro SP2 on my Satellite A200-1SM and everything was ok until I installed Intel Chipset Software Installation Utility version 8.2.0.1014 (recent ones on the site of download of Toshiba; before this step all USB dev. worked properly), after all my USB devices wouldn't work. I had my windows up-to-date with updates from Microsoft, but that has not changed a thing.

  I use Vista once again, but still want to work one day at the XP operating system.

  Please help me if you can.

  Like the previous user said, the chipset must be installed as first pilot
  In addition, it seems that this laptop supports the Intel® GM965 + ICH8M Intel chip.
  It would be advisable to check the version of the Intel page directly

  Hey Buddy

• Outlook 2003 does not work after you install the update Outlook 2007 (KB2412171) _

  I run Windows 7 and Outlook 2003 but the update automatic KB2412171 causes Outlook to crash into the opening with the message "Microsoft Outlook has stopped working" and the program must close so I'm not able to use Outlook at all.

  Please can someone help me with this.

  In these forums, you will find some support for Outlook (2003): http://social.answers.microsoft.com/Forums/en-US/category/officeoutlook ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Sound does not work after you install the update of the IDT High Definition CODEC on DV6 series laptop driver

  Hi, I have edition entertainment laptop HP Pavilion dv6 Windows 7 64 bit OS. I'm used to unsuccessfully drivers every month and everything is fine, but 3 days ago I downloaded the new IDT High Definition Audio CODEC drivers. After installing his system stops working. I tried several times to back the drivers and install them again, but in both his case has not appeared. What should I do?

  Hello

  Uninstall the driver, and then install the codec Microsoft UAA before reinstalling the previous audio driver.

  Please post your results here in your thread.

  Best regards

  ERICO

• Apple Software Update will NOT work after upgrading to Windows 7

  Apple Software Update will NOT work after upgrading to Windows 7

  flyboy340 wrote:

  Apple Software Update will NOT work after upgrading to Windows 7

  More information is needed.

  Which machine you use, OS X are you running?

  Windows 7 running in BootCamp?

  The OS X app store is not present at all?

  AppStore is present but the update tab does not?

• All of a sudden my system aero theme does not work!

  All of a sudden my system aero theme does not work! Before that it worked. But it doesn't now. What should do?

  Original title: aero theme!

  Open the Aero Troubleshooter by clicking the start , and then clicking Control Panel. In the search box, typeTroubleshooter, click on resolution of problems and then, under appearance and personalization, click Display Aero desktop effects.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.