Windows Vista security update 979687 has failed since February 17, 2012 today is April 3, 2012

Windows Vista security update 979687 has failed since February 17, 2012 today is April 3, 2012. What can I do?

Hello

1. did you of recent changes to the system before the show?

2 is the issue limited to the specific update?

3. you try to install the update manually or through Windows updates?

4. do you get an error message when you try to install the update?

5. are you able to install some other updates?

Method 1:

Follow the link below, install the update in clean boot mode and check if it helps.

http://support.Microsoft.com/kb/929135

Note: Once you are done with the boot, follow step 7 in the link to your computer in normal mode.

Method 2:

Follow the link below, download and install the update, check to see if it helps.

http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24159

Method 3:

Follow the link below, run the fix it tool and check if you can install the update.

The problem with Microsoft Windows Update is not working

http://support.Microsoft.com/mats/windows_update/

Also see the mentioned link below for more information.

http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

Let us know if it helps.

Tags: Windows

Similar Questions

  • Three Windows Vista security updates continue to fail every time.

    Three Vista updates fail every time Windows Update tries to install.  They seem to settle in Windows Update and then require a reboot to complete.  During the restart of the system required, "Configuring updates 3/3 ' always shows 0% complete then finally said the ' configuration updates are not correctly installed and updates to return back and restart the system, then ends."

    These are the updates:

    Update security for WIndows Vista (KB2691442)

    Update security for WIndows Vista (KB2655992)

    A security update cumulative for Internet Explorer 9 for WIndows Vista (KB2719177)

    I tried several times with the same negative result of "failing".

    I got a Windows Defender Update yesterday and only one installed perfectly, but they are still pending.

    Suggestions?

    Thank you!

    The link below has options to solve your problem of loop.

    >>

    UTC/GMT is 19:41 Saturday, August 4, 2012

  • Error code 2-24 while installing the Windows Vista Security Update KB2494113

    Original title: Windows Vista security KB2494113 update

    Have tried several times to install Windows Vista Security Update KB2494113.  I get an error code 2 24.

    Hello

    Please follow the steps below.

    Method 1:

    Step 1:

    Put the computer to boot and then try to download and install the update manually from the Microsoft Download Center.

    Click on the link below.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    NOTE: after installing the update successfully, please return the computer to start as usual (see step 7 link mentioned above)

    Step 2: Manually install the update starting from Microsoft Download Center.

    a. go to the Microsoft Download site, type the number of "KB" of the update in the search box and then click press ENTER.

    b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.

    c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button, and then save the update to your desktop.

    d. When you are prompted, click open to install the update.

    Click on the link below.

    Microsoft Download Center

    http://www.Microsoft.com/download/en/default.aspx

    Method 2:

    Follow the steps from the link below.

    Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    Back up the registry

    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

    http://support.Microsoft.com/kb/2509997

  • (KB2378111, 12.0 MB, published 12/10/10) for Windows Vista security update failed with error 800b0100.

    Update of security (KB2378111, 12.0 MB, published 12/10/10) for Win Vista failed with the error 800b0100. Failure of several attempts, power, played external parser M.S., downloaded System Update Readiness Tool, saved the file on the desktop to install proxy server disabled by bike. Nothing has worked.

    Start a help tickethttp://support.microsoft.com/common/international.aspx?rdpath=1&gprid=9860>

    See the section "How to get help" of http://support.microsoft.com/kb/2378111

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    Or you can...

    Start a free Windows Update support incident email request:https://support.microsoft.com/oas/default.aspx?gprid=6527

    Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/

    OPTION has:

    For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  • Code 80070490 error when you install the Svpac2, KB977165 Windows Vista security update

    Download ok, but then install fails when installing bar happens to sbout 75%. 7 other downloads have managed in the same download package. Tried to install this update only 3 or 4 times with the same result... IN CASE OF FAILURE.

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

    A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

    See the section "How to get help" of http://support.microsoft.com/kb/977165

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    Or you can...

    Launch a collateral request for assistance free Windows Update:
    https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

    Home Security page customer & Microsoft Update Solution Center also offer support options
    https://consumersecuritysupport.Microsoft.com/
    http://support.Microsoft.com/ph/6527#tab3

    For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

    For enterprise customers, support for security updates is available through your usual support contacts.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Windows Vista security update error

    Security update Windows Vista Basic Home KB967723 fails with the error code: 8024200d. Have tried to install this update for several months, but still the same error code. All solutions?

    Hello

    see if that helps to fix:

    How to reset the Windows Update components?

    There is also an automatic 'fix - it' here

    http://support.Microsoft.com/kb/971058

    Also, try to put the KB numbers in the search on the link below and then manually download the

    http://www.Microsoft.com/downloads/en/default.aspx

     

    or please repost your question in the correct windows update forum

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  • Windows vista security update didn't NEED HELP!

    Help, please!  Now I get another error code: 80240016.  Update failed.

    http://support.Microsoft.com/kb/957307

    Read the above link to your error Code: 0 x 80240016

    Windows Vista and Windows Server 2008 follow these steps:

    1. Close the browser Windows Update or Microsoft Update Windows.
    2. Click Start
      Collapse this includes this image

      type command prompt, in the list of results, right-click inviteand then click run as administrator.

      Collapse this includes this image

      If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    3. Type the following commands. Press ENTER after each command:
      net stop wuauserv
      net start wuauserv
    4. Close the command prompt window.
    5. Try to install updates again.

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows Vista security update only installs KB2660649, 8007371C error code

    I'm unable to install above updated. All other updates succeeded.

    Gary,

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/8007371c-on-IE-v9-critical-security-update-as/69b7e41a-71e4-4878-8338-930df98c4008 >>

    UTC/GMT is 18:58 on Saturday, July 14, 2012

  • DOWNLOAD NO VISTA SECURITY UPDATE KB978251 - CONTINUES TO RECEIVE 80070026 ERROR CODE - ANY HELP OUT THERE?

    I tried to install Windows Vista Security Update KB978251 and get the error code 80070026. Y at - there anyone out there that can help you with this. Thank you

    Diana D.
    Thanks for the response back. Just before I read your reply, I went to Microsoft Download Center and installed successfully
    it.
    Pevine

  • KB2631813 for Windows XP security update has failed repeatedly to install (error code: 0 x 8007003)

    original title: KB2631813 for Windows XP security update has failed repeatedly to install

    Update KB2631813 for Windows XP security repeatedly failed to install - error code 0 x 8007003. All other updates install successfully. None of the proposed solutions have worked so far including clear update history.

    should [1] I really KB2631813?

    [2] my computer seems not to like it.

    [3] do you think that KB2631813 is really all this effort?

    A1. Yes, as much as you need at every update of safety critical other.

    Note that the vulnerability being patched (e.g., MS12-004) requires KB2598479 and KB2631813 to install! IOW, your computer is still vulnerable to the exploit if if KB2631813 is not installed.

    A2. Your computer 'loved' KB975562 (which is replaced or replaced by KB2631813), so it should also 'like' KB2631813.

    A3. Is the security of your computer and data to this topic (e.g., banking online & credit card passwords) really this effort?

    Repost...

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  • Error Code 8E5E0147. Platform update for Windows Vista (KB971644) update for Windows Vista (KB973917) update for Windows Vista (KB976470) fail to install.

    This problem lasts for a long time and I'd like to update my Windows Vista.  Thank you for your time.

    Hello, I sent an email before for support, but I have no answer at all so I tell myself I'll try to ask my question here.
    I get the following error code (Code 8E5E0147) whenever I try to install the following updates for Window Vista.
    Update for Windows Vista (KB971644) platform
    Update for Windows Vista (KB973917)
    Update for Windows Vista (KB976470)

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

    A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

    See this previous discussion about this error: http://social.technet.microsoft.com/Forums/en/itprovistasetup/thread/5d5084ec-78f6-427c-a146-91fcf72e3616

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Repeated failure to update Windows Vista Security KB2665364

    Update for Windows Vista security for systems x 64 (KB2665364) failed repeatedly
    (while all my other automatic updates succeeded).
    The error code is 80070490 (Windows Update encountered an unknown error).
    I tried the two system update tool and recommended Microsoft Fixit such downloading.
    but neither resolve the situation.
    I couldn't follow the "clean boot" option (it went over my head very quickly).
    When I bought my laptop, it came with Windows Vista Home Premium (64 bit) preinstalled.
    I have a product identification number, but not DVD. Is there a way to repair Windows without the DVD?
    Or...?

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  • I uninstalled OpenMG Secure Module on my Windows Vista [Sony VAIO]... Since then all my videos to AVI extension stopped working

    I uninstalled OpenMG Secure Module on my Windows Vista [Sony VAIO]... Since then all my videos extension AVI has stopped working and other disturbing messages appear as I start my system... Please help me

    original title: (what is the problem? And what can I do about it?) OpenMG Secure Module gets me frustrated.

    Hello

    1. are you faced with questions exclusively with AVI files?

    2. what player you use to play these files?

    I suggest you try to perform the clean boot and check if it helps:

    http://support.Microsoft.com/kb/929135

    NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

    It will be useful.

  • has ran windows (vista ultimate) update and then find that my ipod is not recognized by windows or itunes

    ran windows (vista ultimate) update and concluded that my ipod not recognized by itunes or windows, can anyone help?

    Hi BRIANMOODYRU

     

    You can view the articles below and check out them if the steps to help you resolve the issue-

    http://support.Apple.com/kb/TS1538

    http://support.Apple.com/kb/TS1496

    If you need assistance, you can also consult resources and specific apple. You can get in touch with the community of Apple or the support Web site for additional assistance on the issue:
    http://discussions.info.Apple.com/index.jspa
    OR http://www.apple.com/support/

     

    I hope this helps.

  • Failures of Windows Vista Security KB970710, KB982665 and KB9552709

    If the updates of Windows Vista Security above could not install, should I worry about this, I need to find a way to correct the failures and then installed correctly, please advise. Thank you

    Yes, you need to solve the problem and install them in particular because they are updated for security.

    Try to download and install manually by download on your desktop and install them one by one. Insert the number of KB to get updates on the right and choose the one corresponding to your version of Vista: http://www.microsoft.com/downloads/en/default.aspx.

    If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  Disable your security software.  Then try the updates again. Once this is done (if it worked) don't forget to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

    If this does not help, please transfer your question in Forum Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where updates experts will be happy to help you.  Please post with the information requested here:what to post in the Windows Update forum

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for

  • IOS 10 problems

    Hello I was wondering if someone has the same problem with 10 IOS I have experience - my email application maintains spontaneously quit smoking outside and close after reviewing several emails - every 5-10 minutes? If so, anyone know if Apple is awar

  • The link "Reset your security questions" is not visible. What should I do?

    For some reason any Apple tells me that my iCloud account is blocked for security reasons, when I change the password I am invited to answer security questions or receive an email to reset the password. The e-mail account is my iCloud account, so I c

  • Dark on the screen colors become red lines - Satellite P200D - 11L

    I have this problem since yesterday: sometimes the dark colors on my screen becomes red lines.It is not a problem with the display LCD, in my opinion. It happened on the home screen when I turn on my laptop. So it is not with the OS or drivers.The pr

  • USB port does not work

    The model of my laptop is HP Pavilion 2235dx g4. I use windows7 32-bit. It has 3 usb ports. It contains a usb port, it is just side & two others contain he left aside. In this way the usb port on the right side works fine but two other usb ports on t

  • acquisition of ICP data and signal processing controller

    What is the devil? What is the specific driver I need? The drivers only I don't have installing is USB 3.0. There is none is available for windows 10 and I tried to install the version of windows 7 in compatibility mode, but it has not installed beca