Windows Vista security update error

Security update Windows Vista Basic Home KB967723 fails with the error code: 8024200d. Have tried to install this update for several months, but still the same error code. All solutions?

Hello

see if that helps to fix:

How to reset the Windows Update components?

There is also an automatic 'fix - it' here

http://support.Microsoft.com/kb/971058

Also, try to put the KB numbers in the search on the link below and then manually download the

http://www.Microsoft.com/downloads/en/default.aspx

 

or please repost your question in the correct windows update forum

http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

Tags: Windows

Similar Questions

  • Error code 2-24 while installing the Windows Vista Security Update KB2494113

    Original title: Windows Vista security KB2494113 update

    Have tried several times to install Windows Vista Security Update KB2494113.  I get an error code 2 24.

    Hello

    Please follow the steps below.

    Method 1:

    Step 1:

    Put the computer to boot and then try to download and install the update manually from the Microsoft Download Center.

    Click on the link below.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    NOTE: after installing the update successfully, please return the computer to start as usual (see step 7 link mentioned above)

    Step 2: Manually install the update starting from Microsoft Download Center.

    a. go to the Microsoft Download site, type the number of "KB" of the update in the search box and then click press ENTER.

    b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.

    c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button, and then save the update to your desktop.

    d. When you are prompted, click open to install the update.

    Click on the link below.

    Microsoft Download Center

    http://www.Microsoft.com/download/en/default.aspx

    Method 2:

    Follow the steps from the link below.

    Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    Back up the registry

    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

    http://support.Microsoft.com/kb/2509997

  • Windows Vista security update 979687 has failed since February 17, 2012 today is April 3, 2012

    Windows Vista security update 979687 has failed since February 17, 2012 today is April 3, 2012. What can I do?

    Hello

    1. did you of recent changes to the system before the show?

    2 is the issue limited to the specific update?

    3. you try to install the update manually or through Windows updates?

    4. do you get an error message when you try to install the update?

    5. are you able to install some other updates?

    Method 1:

    Follow the link below, install the update in clean boot mode and check if it helps.

    http://support.Microsoft.com/kb/929135

    Note: Once you are done with the boot, follow step 7 in the link to your computer in normal mode.

    Method 2:

    Follow the link below, download and install the update, check to see if it helps.

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24159

    Method 3:

    Follow the link below, run the fix it tool and check if you can install the update.

    The problem with Microsoft Windows Update is not working

    http://support.Microsoft.com/mats/windows_update/

    Also see the mentioned link below for more information.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Let us know if it helps.

  • (KB2378111, 12.0 MB, published 12/10/10) for Windows Vista security update failed with error 800b0100.

    Update of security (KB2378111, 12.0 MB, published 12/10/10) for Win Vista failed with the error 800b0100. Failure of several attempts, power, played external parser M.S., downloaded System Update Readiness Tool, saved the file on the desktop to install proxy server disabled by bike. Nothing has worked.

    Start a help tickethttp://support.microsoft.com/common/international.aspx?rdpath=1&gprid=9860>

    See the section "How to get help" of http://support.microsoft.com/kb/2378111

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    Or you can...

    Start a free Windows Update support incident email request:https://support.microsoft.com/oas/default.aspx?gprid=6527

    Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/

    OPTION has:

    For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  • Code 80070490 error when you install the Svpac2, KB977165 Windows Vista security update

    Download ok, but then install fails when installing bar happens to sbout 75%. 7 other downloads have managed in the same download package. Tried to install this update only 3 or 4 times with the same result... IN CASE OF FAILURE.

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

    A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

    See the section "How to get help" of http://support.microsoft.com/kb/977165

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    Or you can...

    Launch a collateral request for assistance free Windows Update:
    https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

    Home Security page customer & Microsoft Update Solution Center also offer support options
    https://consumersecuritysupport.Microsoft.com/
    http://support.Microsoft.com/ph/6527#tab3

    For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

    For enterprise customers, support for security updates is available through your usual support contacts.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Windows Vista security update only installs KB2660649, 8007371C error code

    I'm unable to install above updated. All other updates succeeded.

    Gary,

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/8007371c-on-IE-v9-critical-security-update-as/69b7e41a-71e4-4878-8338-930df98c4008 >>

    UTC/GMT is 18:58 on Saturday, July 14, 2012

  • Windows vista 80244018 update error code

    Suddenly windows has stopped updating, I tried everything restoring to a previous restore point and ended in my book since the Recovery Manager and even the formatting problem presists, under this is the windows update log and I hope someone can give me an answer

    2010-01-22 15:17:38:584 760 Misc 5 has 8 = logging initialized (build: 7.0.6001.18000, tz: + 0200) =.
    2010-01-22 15:17:38:600 760 5 a 8 Misc = process: C:\Windows\SYSTEM32\RSTRUI. EXE
    2010-01-22 15:17:38:600 760 5 a 8 Misc = Module: C:\Windows\system32\wuapi.dll
    2010-01-22 15:17:38:584 760 5 a 8 COMAPI FATALE: unable to connect to service (hr = 8007043 C)
    2010-01-22 15:17:38:600 760 5 a 8 COMAPI WARNING: failed to connect to the service. (hr = 8007043C)
    2010-01-22 15:23:25:118 1104 15 c 0 Misc = logging initialized (build: 7.0.6001.18000, tz: + 0200) =.
    2010-01-22 15:23:25:154 1104 15 c 0 Misc = process: C:\Windows\system32\svchost.exe
    2010-01-22 15:23:25:254 1104 15 c 0 Misc = Module: c:\windows\system32\wuaueng.dll
    2010-01-22 15:23:25:118 1104 15 c 0 Service *.
    2010-01-22 15:23:25:389 1104 15 c 0 Service * START * Service: Service startup
    2010-01-22 15:23:25:440 1104 15 c 0 Service *.
    2010-01-22 15:23:25:527 1104 15 c 0 Agent * WU client version 7.0.6001.18000
    2010-01-22 15:23:25:528 1104 15 c 0 Agent * Base Directory: C:\Windows\SoftwareDistribution
    2010-01-22 15:23:25:578 1104 15 c 0 Agent * access type: no proxy
    2010-01-22 15:23:25:630 1104 15 c 0 Agent * network state: disconnected
    2010-01-22 15:24:10:848 1104 15 c 0 Agent * Agent: initialization of Windows Update Agent *.
    2010-01-22 15:24:10:848 1104 15 c 0 Agent * Agent: initialization of the global parameters cache *.
    2010-01-22 15:24:10:848 1104 15 c 0 Agent * WSUS server:
    2010-01-22 15:24:10:848 1104 15 c 0 Agent * state WSUS server:
    2010-01-22 15:24:10:848 1104 15 c 0 Agent * target group: (Unassigned Computers)
    2010-01-22 15:24:10:849 1104 15 c 0 Agent * Windows Update access disabled: No.
    2010-01-22 15:24:10:849 1104 15 c 0 DnldMgr Download manager restoring 0 downloads
    2010-01-22 15:24:10:850 1104 15 c 0 to THE # to THE: initialization of automatic updates.
    2010-01-22 15:24:10:850 1104 15 c 0 to # approval type: on demand (user preference)
    2010-01-22 15:24:10:850 1104 15 c 0 to THE # scheduled install date and time: every day at 03:00
    minor updates to the # Auto - install 15:24:10:850 2010-01-22 1104-15 c 0 - UA: Yes (user preference)
    the time scheduled installation of 15 c 0 the 15:24:10:851 setting 1104 2010-01-22 to 2010-01-23 01:00
    2010-01-22 15:24:10:852 1104 15 c 0 to THE delayed finish initialization
    2010-01-22 15:24:10:964 1104 15 c 0 report * report: initialization of static data to report *.
    2010-01-22 15:24:10:964 1104 15 c 0 report * OS Version = 6.0.6001.1.0.66304
    2010-01-22 15:24:10:964 1104 15 c 0 report * OS Product Type = 0 x 00000003
    2010-01-22 15:24:11:005 1104 15 c 0 report * computer brand = Hewlett-Packard
    2010-01-22 15:24:11:005 1104 15 c 0 report * Computer Model = HP Pavilion dv5 Notebook PC
    2010-01-22 15:24:11:008 1104 15 c 0 report * Bios revision = e.16
    2010-01-22 15:24:11:008 1104 15 c 0 report * the Bios name = default system BIOS
    2010-01-22 15:24:11:008 1104 15 c 0 report * the Bios Release Date = 2009-05-06 T 00: 00:00
    2010-01-22 15:24:11:008 1104 15 c 0 report * locale ID = 3073
    2010-01-22 16:47:31:182 1104 a90 detection with initiating at THE via API DetectNow
    2010-01-22 16:47:31:182 1104 a90 to online (interactive) detection triggering
    2010-01-22 16:47:31:183 1104 15 C 0 TO THE #.
    2010-01-22 16:47:31:183 1104 15 c 0 to THE # START # to THE: research updates
    2010-01-22 16:47:31:183 1104 15 C 0 TO THE #.
    2010-01-22 16:47:31:195 1104 15 C 0 TO THE<## submitted="" ##="" au:="" search="" for="" updates="" [callid="">
    2010-01-22 16:47:31:195 1104 c3c Agent *.
    2010-01-22 16:47:31:195 1104 c3c Agent * START * Agent: finding updates [CallerId = AutomaticUpdates]
    2010-01-22 16:47:31:195 1104 c3c Agent *.
    2010-01-22 16:47:31:195 1104 c3c Agent * Online = Yes; Ignore download priority = No

    2010-01-22 16:47:31:196 1104 c3c Agent * criteria = "IsInstalled = 0 and DeploymentAction = 'Installation' or IsPresent = 1 and DeploymentAction = 'Uninstall' or IsInstalled = 1 and 'Installation' and = 1 RebootRequired = DeploymentAction or IsInstalled = 0 and DeploymentAction = 'Uninstall' and RebootRequired = 1".
    2010-01-22 16:47:31:196 1104 c3c Agent * ServiceID = {9482F4B4-E343-43B6-B170-9A65BC822C77}
    2010-01-22 16:47:31:196 1104 c3c Setup looking for agent SelfUpdate
    2010-01-22 16:47:31:220 1104 c3c configuration version Client: Core: 7.0.6001.18000 to the: 7.0.6001.18000
    2010-01-22 16:47:31:280 1104 c3c Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab:
    2010-01-22 16:47:31:317 1104 c3c Misc Microsoft signed: Yes
    2010-01-22 16:47:33:988 1104 c3c Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0 x 80190193
    2010-01-22 16:47:33:988 1104 c3c Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0 x 80190193
    2010-01-22 16:47:34:558 1104 c3c Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0 x 80190193
    2010-01-22 16:47:34:559 1104 c3c Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0 x 80190193
    2010-01-22 16:47:35:048 1104 c3c Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0 x 80190193
    2010-01-22 16:47:35:048 1104 c3c Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0 x 80190193
    2010-01-22 16:47:35:528 1104 c3c Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0 x 80190193
    2010-01-22 16:47:35:528 1104 c3c Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0 x 80190193
    2010-01-22 16:47:35:528 1104 c3c Misc WARNING: DownloadFileInternal failed for http://download.windowsupdate.com/v6/windowsupdate/redir/wuredir.cab: error 0 x 80190193
    2010-01-22 16:47:35:529 1104 c3c Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab:
    2010-01-22 16:47:35:537 1104 c3c Misc Microsoft signed: Yes
    2010-01-22 16:47:36:402 1104 c3c Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab:
    2010-01-22 16:47:36:411 1104 c3c Misc Microsoft signed: Yes
    2010-01-22 16:47:36:422 1104 c3c Misc validation signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
    2010-01-22 16:47:36:482 1104 c3c Misc Microsoft signed: Yes
    2010-01-22 16:47:37:171 1104 c3c Misc validation signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
    2010-01-22 16:47:37:179 1104 c3c Misc Microsoft signed: Yes
    2010-01-22 16:47:37:727 1104 c3c Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0 x 80190193
    2010-01-22 16:47:37:727 1104 c3c Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0 x 80190193
    2010-01-22 16:47:38:358 1104 c3c Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0 x 80190193
    2010-01-22 16:47:38:359 1104 c3c Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0 x 80190193
    2010-01-22 16:47:38:967 1104 c3c Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0 x 80190193
    2010-01-22 16:47:38:967 1104 c3c Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0 x 80190193
    2010-01-22 16:47:39:468 1104 c3c Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0 x 80190193
    2010-01-22 16:47:39:469 1104 c3c Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0 x 80190193
    2010-01-22 16:47:39:469 1104 c3c Misc WARNING: DownloadFileInternal failed for http://download.windowsupdate.com/v9/windowsupdate/a/selfupdate/WSUS3/x86/Vista/wsus3setup.cab: error 0 x 80190193
    2010-01-22 16:47:39:469 1104 c3c installation caution: SelfUpdate check failed download package information, error = 0 x 80244018
    2010-01-22 16:47:39:469 1104 c3c Setup FATAL: SelfUpdate check failed, err = 0 x 80244018
    2010-01-22 16:47:39:470 1104 c3c Agent * WARNING: jump scan, automatic update control returned 0 x 80244018
    2010-01-22 16:47:39:516 1104 c3c Agent * WARNING: exit code = 0 x 80244018
    2010-01-22 16:47:39:516 1104 c3c Agent *.
    2010-01-22 16:47:39:516 1104 c3c Agent * END * Agent: finding updates [CallerId = AutomaticUpdates]
    2010-01-22 16:47:39:516 1104 c3c Agent *.
    2010-01-22 16:47:39:517 1104 c3c Agent WARNING: customer WU didn't search for the update with error 0 x 80244018
    2010-01-22 16:47:39:517 1104 b88 to THE > # RETURN # to THE: research updates [CallId = {886CCF51-BE35-420F-A0CC-8973BD5F6A35}]
    2010-01-22 16:47:39:517 1104 b88 to # WARNING: reminder of search failed, result = 0 x 80244018
    2010-01-22 16:47:39:517 1104 b88 to # WARNING: could not find the updates with the error code 80244018
    2010-01-22 16:47:39:517 1104 b88 to THE #.
    2010-01-22 16:47:39:517 1104 b88 to # END # in THE: research updates [CallId = {886CCF51-BE35-420F-A0CC-8973BD5F6A35}]
    2010-01-22 16:47:39:518 1104 b88 to THE #.
    2010-01-22 16:47:39:518 1104 b88 to THE timeout parameter next detection at 2010-01-22 19:47:39
    2010-01-22 16:47:39:519 1104 b88 the installation phase to THE adjustment to THE planned for 2010-01-23 01:00
    2010-01-22 16:47:44:470 1104 c3c report REPORT EVENT: {93674445-951D-4A5A-918C-BB8E4E6DEA23} 16:47:39:470 2010-01-22 + 0200 1 148 101 {D67661EB-2423-451D-BF5D-13199E37DF28} 1 80244018 software failure SelfUpdate synchronization Client Windows Update not found with error 0 x 80244018.

    Follow these steps:

    Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

    HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

    Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the page following before otherwise connect the machine to a network or the internet and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

    4 steps to help protect your new computer before going online
         http://www.Microsoft.com/security/pypc.aspx

    NB: Any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.

    Norton Removal Tool
         FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    McAfee Consumer product removal tool
         http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

    See also:

    Measures to help prevent spyware
    http://www.Microsoft.com/security/spyware/prevent.aspx

    Measures to help prevent computer worms
    http://www.Microsoft.com/security/worms/prevent.aspx

    Avoid fake security software!
    http://www.Microsoft.com/security/antivirus/rogue.aspx

    If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Windows Vista. Update error Code 80072EFE

    I'm so sick of Vista, error code constant update and cant update since April 2010, windows Defender won't update, installed a service pack manually, but I can't get the security updates, get error 80072EFE code, very frustrated at this point, all scanned and it's showing no malaware , or virus or anything, so he doesn't let me access my desktop unless I'm scanning the c drive for errors first (2 or more hours to scan) Oh so many questions, I could try windows 7. At my wits end with Vista premium 32 bit... Thanks if you can help... frustrated!

    Hello

    I've seen this error quite often.

    Error 80072EFE is related to the update server closing the connection.

    Mosty likely, the computer can be infected by ROOTKITS.

    Try TDSSKILLER to find rootkits.

    Download and run from here

    http://support.Kaspersky.com/downloads/utils/TDSSKiller.exe

    Then try to update Security Essentials

    See you soon

    Ramesh Asari

  • Windows vista security update didn't NEED HELP!

    Help, please!  Now I get another error code: 80240016.  Update failed.

    http://support.Microsoft.com/kb/957307

    Read the above link to your error Code: 0 x 80240016

    Windows Vista and Windows Server 2008 follow these steps:

    1. Close the browser Windows Update or Microsoft Update Windows.
    2. Click Start
      Collapse this includes this image

      type command prompt, in the list of results, right-click inviteand then click run as administrator.

      Collapse this includes this image

      If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    3. Type the following commands. Press ENTER after each command:
      net stop wuauserv
      net start wuauserv
    4. Close the command prompt window.
    5. Try to install updates again.

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows Vista Auto Update error 8024 has 000

    I have a Toshiba A305 - S6872 Windows Vista 32-bit SP1 I had to install a new Western Digital HARD drive, I have loaded the cd of windows vista Toshiba gave with the laptop, when I go to Windows Update I get the code A 8024, 000, I tried all of the solutions in the pop-ups for the code under cmd, I tried the fix it is but a Shell of power error , I also installed Microsoft Update Standalone Package (.msu) I get the 0xc800247 error code, I tried to make each step under the toshiba web site say it's the Intel Rapid Storage driver, I downloaded the update they had on the Toshiba site and still no luck, someone on Fixya said to download Sp2 on a disk and try this way a different error code. I can't get any help on why windows update will not work all I get is error code after the error code. I never had problems in the past. I just tried the cmd together all the steps listed and does still no update. The codes will tell you to go to intel, then intel tell you to go to Toshiba toshiba said its microsoft? IM so confused. Thank you

    Hello

    You can try the steps proposed by Marilyn - Support Engineer.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_update/Windows-Update-error-code-8024a000/562845f3-78d5-42A0-bed5-e3fd39f01df7

    (Also applies to Windows Vista)

    In addition, refer to the section posted on Thursday, August 11, 2011 18:38 from this link:

    https://social.technet.Microsoft.com/forums/Windows/en-us/45c67633-0df1-483B-b387-2f4d980ff08c/Vista-update-error-8024a000?Forum=itprovistadesktopui

    I hope this helps.

  • Three Windows Vista security updates continue to fail every time.

    Three Vista updates fail every time Windows Update tries to install.  They seem to settle in Windows Update and then require a reboot to complete.  During the restart of the system required, "Configuring updates 3/3 ' always shows 0% complete then finally said the ' configuration updates are not correctly installed and updates to return back and restart the system, then ends."

    These are the updates:

    Update security for WIndows Vista (KB2691442)

    Update security for WIndows Vista (KB2655992)

    A security update cumulative for Internet Explorer 9 for WIndows Vista (KB2719177)

    I tried several times with the same negative result of "failing".

    I got a Windows Defender Update yesterday and only one installed perfectly, but they are still pending.

    Suggestions?

    Thank you!

    The link below has options to solve your problem of loop.

    >>

    UTC/GMT is 19:41 Saturday, August 4, 2012

  • You try to run Windows auto security updates, error message 0 x 80070424

    When I try to update my Windows security he invites me to ensure that the "automatic updates" is enabled.  It is and when I keep trying to update, I get an error message 0 x 80070424. Cannot find a solution anywhere.

    mgbmama,

    This error 0 x 80070424 means "SERVICE ERROR does NOT EXIST". In other words, the BITS service does not exist somehow.

    It is usually enough to do this: start > run and type

    Regsvr32.exe c:\windows\system32\wuaueng.dll

    and press the ENTER key. If this does not resolve the issue:

    Start > run and type in these lines. Press the ENTER key after each one:

    net stop wuauserv

    Regsvr32.exe c:\windows\system32\wuapi.dll

    Regsvr32.exe c:\windows\system32\wups.dll

    Regsvr32.exe c:\windows\system32\wuaueng.dll

    Regsvr32.exe c:\windows\system32\dllcache\wucltui.dll

    Regsvr32.exe MSXML3.dll

    Regsvr32.exe qmgr.dll

    Regsvr32.exe qmgrprxy.dll

    net start wuauserv

    Restart Windows, and then go to Windows Update.

    0R

    See if doing a Reset fixes the problem (throwing the difficulty in default and if necessary, aggressive mode), http://support.microsoft.com/kb/971058>

    Please let us know if it did or did not help to solve your problem

    29/05 / 1112:00: 52 pm

  • DOWNLOAD NO VISTA SECURITY UPDATE KB978251 - CONTINUES TO RECEIVE 80070026 ERROR CODE - ANY HELP OUT THERE?

    I tried to install Windows Vista Security Update KB978251 and get the error code 80070026. Y at - there anyone out there that can help you with this. Thank you

    Diana D.
    Thanks for the response back. Just before I read your reply, I went to Microsoft Download Center and installed successfully
    it.
    Pevine

  • Error Code 8E5E0147. Platform update for Windows Vista (KB971644) update for Windows Vista (KB973917) update for Windows Vista (KB976470) fail to install.

    This problem lasts for a long time and I'd like to update my Windows Vista.  Thank you for your time.

    Hello, I sent an email before for support, but I have no answer at all so I tell myself I'll try to ask my question here.
    I get the following error code (Code 8E5E0147) whenever I try to install the following updates for Window Vista.
    Update for Windows Vista (KB971644) platform
    Update for Windows Vista (KB973917)
    Update for Windows Vista (KB976470)

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

    A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

    See this previous discussion about this error: http://social.technet.microsoft.com/Forums/en/itprovistasetup/thread/5d5084ec-78f6-427c-a146-91fcf72e3616

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Repeated failure to update Windows Vista Security KB2665364

    Update for Windows Vista security for systems x 64 (KB2665364) failed repeatedly
    (while all my other automatic updates succeeded).
    The error code is 80070490 (Windows Update encountered an unknown error).
    I tried the two system update tool and recommended Microsoft Fixit such downloading.
    but neither resolve the situation.
    I couldn't follow the "clean boot" option (it went over my head very quickly).
    When I bought my laptop, it came with Windows Vista Home Premium (64 bit) preinstalled.
    I have a product identification number, but not DVD. Is there a way to repair Windows without the DVD?
    Or...?

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

Maybe you are looking for

  • default report

    Hello I hope I'm not creating a dump. anyway. A big question on tiara: I always use the same type of display: graphical 2D with several curves, and axes. The default font size is 3 (too big), the thickness of the default curve is minimal (too thin),

  • dv3-2222tx without the audio via hdmi

    I have a HP Dv3-2222tx, and when I conn. Cable HDMI to TV, him dosent sound work, I have chosen in my Audio out HDMI, as well as in the IDT Audio control, I can see on the indicator that it is strong, but can not hear it. I tested already and also ca

  • I managed to reduce the font size in my sri_94@live.co.UK to the tiny size less than a block of code, it is impossible to read.

    Original title: Windows 7 Premium Can someone please help me with this problem, I managed to reduce the font size in my [email protected] to the tiny size less than a block of code, it is impossible to interpret, each can bring a solution please.

  • Personalization of user form edit OIM11gR2

    Hi Experts, I customize the user form edit add new UDF. I can see that the values of the existing database is filled in the text boxes to the UDF, s but when I change any text in those, the button on the page does not get activated 'submit '. I guess

  • Help with the protected fields

    Hi allI have a form that has several fields. Of those, some are protected fields that are intended only for the administrator, rest are intended for users in general. General users should submit the form by filling out only the fields that are intend