Windows Vista security update only installs KB2660649, 8007371C error code

I'm unable to install above updated. All other updates succeeded.

Gary,

http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/8007371c-on-IE-v9-critical-security-update-as/69b7e41a-71e4-4878-8338-930df98c4008 >>

UTC/GMT is 18:58 on Saturday, July 14, 2012

Tags: Windows

Similar Questions

  • Windows Vista security update 979687 has failed since February 17, 2012 today is April 3, 2012

    Windows Vista security update 979687 has failed since February 17, 2012 today is April 3, 2012. What can I do?

    Hello

    1. did you of recent changes to the system before the show?

    2 is the issue limited to the specific update?

    3. you try to install the update manually or through Windows updates?

    4. do you get an error message when you try to install the update?

    5. are you able to install some other updates?

    Method 1:

    Follow the link below, install the update in clean boot mode and check if it helps.

    http://support.Microsoft.com/kb/929135

    Note: Once you are done with the boot, follow step 7 in the link to your computer in normal mode.

    Method 2:

    Follow the link below, download and install the update, check to see if it helps.

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24159

    Method 3:

    Follow the link below, run the fix it tool and check if you can install the update.

    The problem with Microsoft Windows Update is not working

    http://support.Microsoft.com/mats/windows_update/

    Also see the mentioned link below for more information.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Let us know if it helps.

  • Error code 2-24 while installing the Windows Vista Security Update KB2494113

    Original title: Windows Vista security KB2494113 update

    Have tried several times to install Windows Vista Security Update KB2494113.  I get an error code 2 24.

    Hello

    Please follow the steps below.

    Method 1:

    Step 1:

    Put the computer to boot and then try to download and install the update manually from the Microsoft Download Center.

    Click on the link below.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    NOTE: after installing the update successfully, please return the computer to start as usual (see step 7 link mentioned above)

    Step 2: Manually install the update starting from Microsoft Download Center.

    a. go to the Microsoft Download site, type the number of "KB" of the update in the search box and then click press ENTER.

    b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.

    c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button, and then save the update to your desktop.

    d. When you are prompted, click open to install the update.

    Click on the link below.

    Microsoft Download Center

    http://www.Microsoft.com/download/en/default.aspx

    Method 2:

    Follow the steps from the link below.

    Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    Back up the registry

    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

    http://support.Microsoft.com/kb/2509997

  • Windows Vista security update error

    Security update Windows Vista Basic Home KB967723 fails with the error code: 8024200d. Have tried to install this update for several months, but still the same error code. All solutions?

    Hello

    see if that helps to fix:

    How to reset the Windows Update components?

    There is also an automatic 'fix - it' here

    http://support.Microsoft.com/kb/971058

    Also, try to put the KB numbers in the search on the link below and then manually download the

    http://www.Microsoft.com/downloads/en/default.aspx

     

    or please repost your question in the correct windows update forum

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  • Update for Windows Vista Service Pack 2 (KB948465) repeatedly fails - error Code 80246007

    Update for Windows Vista Service Pack 2 (KB948465) repeatedly - fails error Code 80246007.  BITS ok - Microsoft 'Fix' detected 'problems' and 'fixed '.

    them, but the update continues to fail.  Any help would be appreciated.

    Hello

    Perform the steps from the link below and see if it helps.

    How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

    Hope this information helps.

  • My windows will not update, I get a 80072ee2 error code?

    My windows will not update, I get a 80072ee2 error code?

    I run Vista, and I know there have been some problems with updates in the past, would be Vista the reason why I'm getting this error?

    See you soon

    Kim

    If Windows Update error 80072ee2 during updates, you may need to add the addresses of websites which Windows Update downloads updates to the exceptions to your firewall or 'green list '.

    To add the Windows Update Web sites to a firewall exceptions list

    • Windows Firewall ships with this version of Windows and should already include these sites in the exceptions list. If you are using another firewall, see Help for the software publisher to see how to add these websites to your firewall exceptions list:

      • >

    If the problem persists after these steps, see this

    http://support.Microsoft.com/?kbid=836941>

    UTC/GMT is 15:13 Wednesday, February 1, 2012

  • Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

    Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

    error 0 x 80070017 data ERROR_CRC des 2147024873 (cyclic redundancy check).

    The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation.

    Clean the system (compensation to all Temp/Tmp folders and included the content delete all offline, the TIF browser, Cookies, compensation do a disk cleanup.)

    Click the Start button. In the search box, type Disk Cleanup, and then in the list of results, click Disk Cleanup.

    Maybe some interviews, try to run the "chkdsk/r" command at the command prompt

    Check disk or Chkdsk is disk error checking in VISTA. It can be used to verify orruption and optionally repair errors and bad sectors on the hard disk.

    How to run Checkdisk at startup CHKDSK

    http://www.Vistax64.com/tricks-n-tips/67612-checkdisk.html?LTR=C>

    Run SFC/scannow

    File system (CFS) auditor checks all files in Vista are where they should be, and that they are not corrupt.

    WHY: You want to ensure that the base operating system files have not been damaged or changed.

    How to fix and check the integrity of system files of Vista with the System File Checker: SFC/scannow

    http://www.Vistax64.com/tutorials/66978-system-files.html>

    04/01 / 1107:15: 20:00

  • For Windows XP (KB2478971) security update will not be installed - error code: 0xD0000135

    Hi, I use Windows XP Home Edition.

    I had difficulties to install security updates 11.

    An update of the sample is displayed above. All others are updated for security and all have the same error code.

    I clicked on the question mark next to the Red Cross, which shows that the update failed.

    The "Installation location" dialog box appears.

    I click on the link 'Assisted Microsoft Support Online'

    This brings you to: a page titled "Microsoft Windows Update problems trouble."

    NEXT (!)

    A dialog box appears informing me that

    additional software (.NET framework 2.0 or later) is required to run this troubleshooting.

    He tells me to fill in 2 steps:

    1. install the softwar very from the Microsoft Download Center. (FACT)

    "2. next, visit http://www.microsoft.com/fixit to restart the troubleshooter.

    I did the above, but THE convenience STORE NEVER RESTARTS!

    Can anyone help?

    Hello

    -Did you change on your computer before the show?

    I suggest you to follow the steps in these articles and check if it helps.
    You cannot install some programs or updates
    http://support.Microsoft.com/kb/943144

  • Windows could not create an installation folder. Error code: 0x80070005

    I bought Windows 7 Ultimate and tried to install it.  I hit "custom" install because I wanted to start over completely and got this error message.

    Try these suggestions:

    Error 0 x 80070005 occurs if the upgrade doesn't have permission to the folder writecertain. Try the following steps:

    Reset permissions

    ============

    1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads

    2. go to your desktop and double-click on the downloaded file.

    3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.

    4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.

    5. copy the following commands, and then paste them into the opened Notepad window:

    off @echo

    Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f

    Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f

    Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f

    Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f

    Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f

    Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f

    Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f

    Subinacl % lecteur_systeme % /subdirectories / Grant = system = f

    @Echo =========================

    Completed @Echo.

    @Echo =========================

    @pause

    6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

    7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".

    8. you will see a window of type BACK treatment.

    NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

    If the same thing happens, move to the next step.

    Run the upgrade by using the built-in Administrator

    ================================

    1. click the button start-> all programs-> Accessories.

    2. right click on command prompt and select "run as Administrator".

    3. click on continue when user account control window appears.

    4 copy the following command and press ENTER:

    NET user administrator / Active: Yes

    5 restart the computer and then log on the computer of this administrator account.

    6. run the upgrade to windows 7.

    Error code 0 x 80070005 usually indicates that you don't have enough privileges or the operation is blocked. I know, some programs (Boot Camp on a Mac PC, etc.) is not compatible with Windows 7, if you have installed these programs on the computer, you may not be able to perform the upgrade. You should uninstall these programs before upgrading. In addition, such a question may be related to UAC, I recommend you turn off UAC in Windows Vista, if you have installed security software, try uninstalling the security application as well.

    BTW, for your references, I found similar questions:

    Windows could not create a required installation folder. Error code: 0x80070005

    http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/d04e9cf3-3eae-4A1F-a9f8-e2c5ed88d183/

    "Cannot create file" error when you try to install Windows 7

    http://social.technet.Microsoft.com/forums/en/w7itproinstall/thread/3621e8cf-B2CE-479b-BEAC-08acc435a856

    Error 0 x 80070005 when upgrading to windows 7 from vista

    http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/08986904-c822-4801-95a5-55ddd5aadcea/

    See also:

    http://social.answers.Microsoft.com/forums/en-us/w7install/thread/cb679e27-f2e6-4CD5-b708-a4992cec5a9d

    CREDIT: Dale Qiao Microsoft, host and cdobbs

  • (KB2378111, 12.0 MB, published 12/10/10) for Windows Vista security update failed with error 800b0100.

    Update of security (KB2378111, 12.0 MB, published 12/10/10) for Win Vista failed with the error 800b0100. Failure of several attempts, power, played external parser M.S., downloaded System Update Readiness Tool, saved the file on the desktop to install proxy server disabled by bike. Nothing has worked.

    Start a help tickethttp://support.microsoft.com/common/international.aspx?rdpath=1&gprid=9860>

    See the section "How to get help" of http://support.microsoft.com/kb/2378111

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    Or you can...

    Start a free Windows Update support incident email request:https://support.microsoft.com/oas/default.aspx?gprid=6527

    Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/

    OPTION has:

    For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  • Security update only installs

    KB2419632 security update will not install XP SP3... no error code, only statement "have not installed" in a dialog box. Any tips?

    Please answer all the questions of diagnostic following by number in your very next answer (no need to quote this post):

    1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

    2 to give application Norton or McAfee application ever been installed on this computer?

    3. do you have a free trial Norton or a McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

    =======================================

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Code 80070490 error when you install the Svpac2, KB977165 Windows Vista security update

    Download ok, but then install fails when installing bar happens to sbout 75%. 7 other downloads have managed in the same download package. Tried to install this update only 3 or 4 times with the same result... IN CASE OF FAILURE.

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

    A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

    See the section "How to get help" of http://support.microsoft.com/kb/977165

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    Or you can...

    Launch a collateral request for assistance free Windows Update:
    https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

    Home Security page customer & Microsoft Update Solution Center also offer support options
    https://consumersecuritysupport.Microsoft.com/
    http://support.Microsoft.com/ph/6527#tab3

    For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

    For enterprise customers, support for security updates is available through your usual support contacts.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Three Windows Vista security updates continue to fail every time.

    Three Vista updates fail every time Windows Update tries to install.  They seem to settle in Windows Update and then require a reboot to complete.  During the restart of the system required, "Configuring updates 3/3 ' always shows 0% complete then finally said the ' configuration updates are not correctly installed and updates to return back and restart the system, then ends."

    These are the updates:

    Update security for WIndows Vista (KB2691442)

    Update security for WIndows Vista (KB2655992)

    A security update cumulative for Internet Explorer 9 for WIndows Vista (KB2719177)

    I tried several times with the same negative result of "failing".

    I got a Windows Defender Update yesterday and only one installed perfectly, but they are still pending.

    Suggestions?

    Thank you!

    The link below has options to solve your problem of loop.

    >>

    UTC/GMT is 19:41 Saturday, August 4, 2012

  • Windows vista security update didn't NEED HELP!

    Help, please!  Now I get another error code: 80240016.  Update failed.

    http://support.Microsoft.com/kb/957307

    Read the above link to your error Code: 0 x 80240016

    Windows Vista and Windows Server 2008 follow these steps:

    1. Close the browser Windows Update or Microsoft Update Windows.
    2. Click Start
      Collapse this includes this image

      type command prompt, in the list of results, right-click inviteand then click run as administrator.

      Collapse this includes this image

      If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    3. Type the following commands. Press ENTER after each command:
      net stop wuauserv
      net start wuauserv
    4. Close the command prompt window.
    5. Try to install updates again.

    See you soon.

    Mick Murphy - Microsoft partner

  • Update for Internet Explorer 8 Compatibility mode list for Windows Vista (KB982632) cannot install with the error details: Code 80070490 & also update for Windows Vista (KB981793) with the details of the error: Code 80070490

    I am running windows vista Home premium, on a system 32-bit HP Pavilion dv9700 op.  I have internet project 8 service pack 2 of windows and norton security suite installed on my computer.  I do not understand why these 2 updates keep do not install unless it didn't, but they are listed under important updates in the windows updates, can you please help me, maybe I don't have not enough memory on the left?

    Thank you!

    Windows Update error 80070490

    If you receive the Windows Update 80070490 error, it means that a file (CBS Manifest) that is needed to install updates is corrupt. To correct this problem, you will need to repairWindows. RepairingWindows will not damage your personal files or the programs that are installed on your computer.

    The System Update Readiness Tool for Windows can correct some conditions that causeWindows Update error 80070490. You can access and run this tool by reading this http://support.microsoft.com/kb/947821 on the Microsoft Web site.

    If the system update readiness tool solves the problem, you need to repairWindows. RepairingWindows will not damage your personal files or the programs that are installed on your computer.

    Once you have completed the repair, you will need to restart Windows Update to install updates are not included on the installation DVD. RepairWindows, follow these steps:

    1. Close all programs and restart your computer.

    2. Insert the DVD into your disc drive. Wait for the installer to start. If the installation program does not start automatically, follow these steps:

      1. Click on start and type Drive: \setup.exe in the search box. ReplaceDrive with the letter of the DVD drive of your computer (for example, D:\setup.exe).

      2. List programs, click Setup.exe.

    3. Click on install now.

    4. Click go online to get the latest updates for installation (recommended).

    5. If you are prompted to do this, type the Windows product key.

    6. What type of installation you want? window, click upgrade.

    7. Once the installation is complete, restart your computer, and then run Windows Update.

    If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for

  • MB Ethernet coils fail

    I have I have the same problem with the Ethernet MB.I need 40 exits.The first 16 work perfectly. The next 8 coils do not work, next 8 work, 16 next do not work, then 8, next 24 do not work and work for the last 8. Finally, to activate the outputs 40,

  • Block spam

    I have Windows XP and I can't understand or how to block spam or junk e-mail. I am running Windows Express.

  • Lightroom is loading 6

    I'm unable to load LR6 on my pc and get the error message from windows vista is not supported. My pc running Windows 7 sp1 how can I solve this problem.

  • vSphere 5.5: network with Server Intel S3000AH map problem

    Hi allVery strange problem, I replaced vSphere 5.0 5.5 today with the face: the installation process was successful, after restarting, vSphere can get the IP address of the DHCP server, but I can't ping or ping to the gateway of the it.Version 5.0 is

  • cs6 version problem incompatible tutorial

    Hello. I try to follow the tutorial from my CS6 version online, but the menu of insertion has nothing to do, I don't have no mode "structure", or of "simple list" or "header", etc... where can I find these? Thank you