Windows Vista Service Pack 4 upgrade errors - Error Codes 643 and D59

Similar Questions

• during installation of windows vista service pack 2, an error code comes and says that some updates to update were not installed with an error code (KB948465) _

  system information:
  Windows vista edition Home premium
  2007 micro.corp. service pack 1
  Manufacturer: Hewlett-Packard
  model: compaq presario CQ61 notebook pc
  ORP of 32 bits. sys
  Processor: cpu t3400 2.16 GHz

  And the error was...?

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  =====================

  In no order given...

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  [0 x Error 80070002; 0x8007000D; 0 x 80073712; 0x800B0100; & 0x8024200D]
  http://support.Microsoft.com/kb/947366

  Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005:
  http://support.Microsoft.com/kb/971204

  0X8007371B ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE
  http://support.Microsoft.com/kb/947821

  Error message when you try to install Windows Vista Service Pack 2 or Windows Server 2008 Service Pack 2: "an internal error occurred during the installation of the service pack:
  http://support.Microsoft.com/kb/967818

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Vista Service Pack 1 (KB936330) Error Details: Code C0000005

  Hello

  It has been moving my mind for days, and for this reason, I have to reinstall Windows 3 times in the past week.

  All I want to do is to install updates to SP2. This making, so made my computer crash due to updates do not.

  I have 32 Failed updates in my journal.

  I have this error when you try to install Service Pack 1

  Windows Vista Service Pack 1 (KB936330) Error Details: Code C0000005

  I have googled this error with no luck and few answers on how to repair this error. It is a necessity for me to install Service Pack 2

  on my work related and personal computer use. and I can't seem to find it.

  If anyone has answers as in why this error occurs, PLEASE let me know.

  NOTE *.

  I do not check my hotmail account. If you want to send me an email with the help, my email address is * address email is removed from the privacy *.

  Thank you in advance for the answer or resolution

  I do not have anti virus on my computer programs...

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "ofhttp://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I can't update my windows vista service pack 1, its shows a code error 8024402f, please notify

  I can't update my windows vista service pack 1, its shows a code error 8024402f, please notify

  See the following topic for your question

  http://Windows.Microsoft.com/en-IE/Windows-Vista/Windows-Update-error-80244016-8024402f-or-c80003fa >

  06/25 / 1101:33: 43 pm

• Windows Vista Service Pack 2 update (KB9448465) Failure Code 80200013

  I tried several times to install this update. Whenever I get up to 45%, and it stops telling me he could not install and gives the error code 80200013. Help, please.

  Proposed response:

  Hello Chavumaboy,

  I hope you do well. Chavumaboy, to solve this problem, try to perform a clean boot and then install a standalone package for Windows Vista Service Pack 2

  > Minimum will disable all third party services. It allows to eliminate software conflicts. Please follow the steps below to perform a clean boot:
     
  -Connect to the computer by using an account that has administrator rights.
  -Click Start, type msconfig.exe in the start search box and press ENTER to start the System Configuration
  Utility.
  -If you are prompted for an administrator password or for confirmation, type your password or click on continue.
  -On the general tab, click Selective startup, and then clear the check box load startup items.
  -On the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
  -Click OK and then click on restart.

  > See the link below to download and install the stand-alone package for the Service Pack 2 for Windows Vista:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  Please go through the link below for more details:

  http://support.Microsoft.com/kb/947366

  I hope this helps.

  Thank you.

• Windows vista service pack 2 80070017 error

  When I try to download the vista service pack 2 update, I get the 80070017 error. This has also caused my windows media player to stop working.

  Carrie

  Method 1

  1. Click Start, type cmd in the Search box, right-click cmd in the programs list, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password, or click continue.
  2. At the command prompt, type Chkdsk/f and press ENTER.
  3. Press y when you are prompted to check the drive the next time the system restarts.
  4. Close all applications and restart the computer.

     Note When you restart, Windows checks the drive for errors, and then starts.

  5. Once the computer restarts, install the updates again.

  If method 1 does not resolve this problem, try Method 2.

  Method 2

  Rename the download file.

  1. Click Start, type notepad in the Start Search box, and then click Notepad in the programs list.
  2. Copy the following commands, and then paste them into the Notepad file:
      
  3. net stop wuauserv
  4. CD %systemroot%\SoftwareDistribution
  5. Download of ren Download.old
  6. net start wuauserv
  7. On the file menu, click on record under.
  8. In the file name box, type rename.bat, and then click on all files (*. *) in the Save as type box.
  9. Save the file rename.bat on the desktop.
  10. Right-click the rename.bat file, and then click run as administrator.

      If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  11. Try to install updates again.

  Note When the updates are installed successfully, you can safely remove the rename.bat file.

  UTC/GMT is 13:15 on Tuesday, November 6, 2012

• Windows vista service pack 2 [BOOT ERROR! Oxc0190036 1187/59291 (Faultrep.dll)]

  Help, please!

  I use a sony viao laptop AR71M with windows vista home premium. I tried to update on windows service pack 2 panoramas, but get a boot error after installation
  !! Oxc0190036 1187/59291 (Faultrep.dll)
  I have tried everything I know, but it didn't budge. I had to restore my system several times so that I can continue to use my laptop.

  Hi DaveCole,

  I suggest you try the methods mentioned below and check if it helps.

  Method 1: Start Windows Vista with the Windows installation media, and then use the repair feature.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 2: Start the system in safe mode and then use the system restore feature.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 3: Follow the provided article.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  Method 4: No detection system file checker (SFC).

  http://support.Microsoft.com/kb/929833

• Windows vista service pack 2 installation error

  Hello:
  I tried to install windows vista SP2 via windows update, but it has failed, the error was 80070001. I tried to install sp2 by using the stand-alone Installer, but there was another error has occurred, probably 0x80070005. I even closed all running programs (including those of the icon of the status bar) and I even tried to delete the folder c:\Windows\SoftwareDistribution, but same error when I try to install sp2. In addition, I have installed the analysis tool, and it did not work, either, same error when I tried to install sp2.
  I am running windows vista home basic 32-bit
  What software may conflict with the installation of windows vista sp2?
  Any help would be appreciated.

  Hello Windows Vista,

  Afraid that verify that you have all of the corrupt files.  To do this, follow these steps:

  1. open an elevated command prompt. To do this, clickStart, click principally made programs, accessories, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  2. type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• failed to update Windows 7 service pack 3, 0057 error code

  Been updating the suite Microsoft Office 2007 Service Pack 3 several times now, failure every time, even after you have followed the suggestions of error code, etc... Further investigation, note this update SP3 tried to update for over a year.  I am at a loss, no resolution of microsoft site troubleshooting suggestions...?

  Try to download the installer for Office 2007 SP3 offline and install it:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=27838

• Cannot install windows vista service pack 1, 57 gives error code

  When you install windows vista service pack 1 that it says code 57 Windows update has encountered an error can someone help please?

  Hello

  (1) what is the exact\complete error message you get?
  (2) remember to make changes to the computer before the question?
   
  See the methods mentioned below and check if that helps.
  Method 1:
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
  Method 2:
  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Note: You should not turn off Windows Firewall unless you have another firewall is enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
   
  Method 3:
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
   
  Hope this information helps.

• Windows Update of Windows Vista Service Pack 2 (KB948465)

  After installing Windows Update Windows Vista Service Pack 2 (KB948465) my computer slowed down and
  I was not able to connect to my hotmail account.

  I uninstalled, or rather I went the restore point on my computer and uninstalled it.

  Why Microsoft comes up with these updates?  Very often, these mess my computer updates.

  Sincerely,

  Lucienne

  Never, EVER use system restore to 'Cancel' an update, Service Pack, or upgrade of IE!  Instead, uninstall the update, Service Pack, or the IE patch & reboot.  If that does not resolve the problem, then try System Restore.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I cancelled the update of Windows Vista Service Pack 2 (KB948465) and now I can't get it to download?

  I have started to download Windows Vista Service Pack 2 (KB948465) but cancelled it.. and now I want to download and update, but it does not display on my update list... any help?

  You can download the Vista SP2 standalone installer:

  • Download the SP2 32-bit from the Download Center

  • Download the SP2 64-bit from the Download Center

  To see if you have Windows 32 or 64-bit:

  1 open the system by clicking the Start button, right-click computer, and then clicking Properties.

  2. in respect of the system, you can view the type of system, it will say 32 or 64 bits.

• Code800F900 'unknown error in windows update' trying to download windows vista service pack 2

  try to download windows vista service pack 2. Last update was on May 21, 2010. For a few weeks or months, the computer can be terribly slow. Often a hard drive rattle sound. For this, I tried anti-spyware, last week I installed and ran AdAware from lavasoft. It found nothing except two small cookies. A few weeks earlier, I had done the same thing using windows Defender. Also nothing. Along with a check disk hard I did not find much either. What end of the lifecycle for this computer, now about 3 years? He was one of the first available vista computers. Thank you for your help, Peter

  * Original title * Code800F900 'unknown error in windows update', try to download windows vista service pack 2__I have an oem version purchased with HP model s7720.nl

  Why did you delete your post where you said that Norton application has been installed at some point in the past?

  There is nothing wrong with the guarantee of these forums, but I'd be willing to bet that there is something VERY wrong with the security of your computer!

  Let's cut to the Chase. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "ofhttp://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need help, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Vista Service Pack 1 error! 0xc01a001d!

  I was prompted to install Windows Vista Service Pack 1 and now I get an error! 0xc01a001d!  I can't do anything. I turn it on and it crashes. I can't even start screen. What should I do?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  If the above does not work:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• When trying to install windows vista service pack 2 I get this error: "Element not found" (0 x 80070490)

  Cannot install windows vista service pack 2

  http://support.Microsoft.com/kb/958044

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  Windows Vista and Windows Server 2008 to solve this problem, you must perform a repair of Windows Vista or Windows Server 2008 installation. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  Note Run a repair installation will not damage files and applications that are currently installed on your computer.

  To perform a repair of Windows Vista or Windows Server 2008 installation, follow these steps:

  1. Close all applications and restart the computer.
  2. Insert the Windows Vista DVD or Windows Server 2008 DVD into the DVD drive of the computer.
  3. In the settings window, click install now.

     Note If Windows does not automatically detect the DVD, follow these steps:

     1. Click Start
        Collapse this includes this image

        

        and then type Drive: \setup.exe in the box start the search .

        Note The placeholder drive is the drive letter of the computer's DVD.

     2. In the list of programs , click Setup.exe.
     3. In the settings window, click install now.
  4. Click connect to get the latest updates for installation (recommended).
  5. Type the CD key if you are prompted to do so.
  6. Click Yes to accept the Microsoft software license agreement.
  7. On the which type of installation do you want? of the screen, click upgrade.
  8. When the installation is complete, restart your computer and try again to install updates.

  If the above does not resolve the problem:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner