Windows Vista. Setup.exe has stopped working and I can't get the program to load.

Similar Questions

• Satellite A300D - upgrade Vista - "Setup.exe has stopped working".

  Hello

  I use Satellite A300D with Vista and I tried to upgrade to Windows 7 using Toshiba upgrader.

  After the language selection and proceed to the other steps, it asks me to uninstall a bunch of programs. Some are uninstalled very well, but when it comes to four other programs he says "Setup.exe has stopped working" and it does not uninstall.

  I tried to uninstall the manually, but I got the same message.

  These programs are;
  Setup driver Atheros
  Toshiba hardware configuration
  Toshiba supervisor password
  Realtek High Definition Audio Driver

  So I can't go ahead with the upgrade.

  Anyone know what could be the problem?

  Thanks in advance,

  Pouvez - TR
  .

  Hello

  Anyboday tried to run the upgrade as an administrator? Therefore, click on the setup.exe file on the upgrade disc and run it as an administrator.

  Moreover I also upgraded from Vista to Windows 7, but in the manual supplied with the notebook, I founded the information, that it s to start the upgrade directly after a new installation of recovery.

  If you did a recovery facility before the upgrade?

  Welcome them

• FSS.dat has stopped working and I have to close the program

  I get a message that fss.dat has stopped working and I have to close the program by the message box, this happens quite often how to solve this problem

  Maybe this post help

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/error-message-fssdat-program-is-not-working-and/eadcf204-22d9-4DB9-9660-a8720d1b9211

• Setup.exe has stopped working, try to install Allods Online, the new MMO

  I'm having a problem with my setup.exe Allods... I can't seem to run. It is said that setup.exe has stopped working
  a problem causing the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
  I tried to change the compatibility settings, I tried to run as administrator (Yes it's Vista! surprise...) and I tried the Msconfig.exe to fix.
  I'm desperate... It's the signature of the problem below. Signature of the problem
  Problem event name: APPCRASH
  Application name: setup.exe_unknown
  Application version: 0.0.0.0
  Application timestamp: 4a2ae2a2
  Fault Module name: RichEd20.dll
  Fault Module Version: 5.31.23.1228
  Timestamp of Module error: 4791 has 775
  Exception code: c0000005
  Exception offset: 0001e469
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033
  Additional information 1: fd00
  More information 2: ea6f5fe8924aaa756324d57f87834160
  Additional information 3: fd00
  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  Additional information about the problem
  Bucket ID: 1718522889

  Please just ask for more information.

  Check it again. http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe

  Run as Admin

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not fix it:
  

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  They will help you with your question in Forum Vista programs at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• My taskbar is lost, explorer.exe is has stopped working and I can only open the Task Manager program...

  Hi, can you help me?
  After that I logged my Windows, I see that my taskbar are lost...
  Windows has said, "Windows Explorer has stopped working"...
  I click on "close the program".
  I use the Task Manager to open explorer.exe again...
  But, the same message still to come...
  So, I can just open my Taskmgr programs...
  What will happen to my laptop?

  Hello

  1. What is the full/exact error message?
  2 were there any hardware or software changes made on the computer before this problem?

  Follow the steps.

   

  Method 1
  Start the computer in safe mode and check if the problem persists, if the question does not persist then perform the clean boot and check if the problem resolves.

  Step 1
  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed. Please click the below mentioned link.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135
  Note: After you have performed the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startup mode.

   

  Method 2:
  See the help article and check if it helps.

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

  An upgrade on the spot is the final solution before you have to reinstall the operating system.
  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  Response with more information to help you.

• Suddenly, Windows Mail (Vista Home) said "windows mail has stopped working"... can't use the program. What should I do?

  My Windows Mail suddenly said "windows mail has stopped working" whenever I open it. He will not receive messages, just does not work!

  What should I do?

  Try to compact and repair the database.
   
  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx
   
   

• Vista setup.exe has stopped working message received during the program installation Avanquest

  Tried other recommendations as the boot is a way to solve the problem of getting the error message when I want to install an Avanquest program that says it is compatible but I can't install the software.  Told me to get off my computer Vista and stop all these problems.  I can't the setup.exe to rework?  What can I do next to get off my Vista system.

  Hello

  Contact Avanquest as it is probably a known issue. Right click on it and RUN AS ADMIN?
  Rob - bicycle - Mark Twain said it is good.

• Defender has stopped working and I can not get restarted can help you

  have tried rebooting, but nothing works

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Error 'setup.exe has stopped working' when installing Quicken.

  Original title: setup.exe has stopped working

  I have read through the related forums and don't think I've seen a solid answer to this problem.  I'm trying to reinstall Quicken on my Dell Inspiron 530 Vista with service pack 2.  (Long and ugly tells how he got deleted at first - thank you, Intuit).

  When I try to install Quicken, I get the above error message.  I tried the clean boot solution; I tried to enter the installation and execution of the exe directly from there; I tried to do a right click to open/run as administrator... etc.

  I have NOT run BigFix.com or other third-party software to solve this problem - I'm very comfortable with another piece of software download and throw into the equation.  What is a corrupted registry and I have TO run third to fix?  Is it a bug of Vista - is there a fix of bug for her?

  I really don't like that to 'guilty' at this point, I just want to repair and recover my electronic payments!  Help, please!

  Hey, Keenon,.

  Please, remove all existing components of Quicken from the computer and do a fresh install.

  Step 1: use QcleanUI uninstall Quicken

  Follow the instructions in the article below for more information on how to use this tool.

  The use of QcleanUI to uninstall Quicken

  
  Step 2: Install Quicken

   

  Refer to this article for installation help.

  Installation of Quicken on Microsoft Windows 7 or Vista

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• WRT400N setup.exe has stopped working

  I just got a HP Pavillion desktop computer new with Vista 64 and I have problems installing. Whenever I put the installation disc in the drive it does not load and I get an error message telling me that setup.exe has stopped working and will be forced to close. I even tried to jump the autorun and will my CD-ROM drive and manually select the file setup.exe. The initial splash screen appears and says please wait loading but I never have any more than that because the program crashes. I thought that maybe the drive was defective, but I tried it on a XP desktop and an XP netbook and the disk works fine on both. What gives? I searched this whole Forum and it seems I am the only person with this problem. My new defective computer or is it the user

  OK, so I finally understand for me. I did an exploring more of the disc and found a file named setup64.exe and TADAAAAA this file runs. But I still can't LELA to run but hey at least I have everything works now

• Microsoft error message "R003. EXE has stopped working and was closed ".

  Anyone know what this means?   Microsoft Windows 'R003. EXE has stopped working and was closed "it doesn't affect my computers operation at all.

  Discussions were merged.

  Deleted duplicate.

  I just found this while trying to get the answer. I gave him a shot and think that it does the trick.

  http://malwaretips.com/blogs/default-tab-search-bar-removal/

• I'm putting a game on my computer and repeat me setup.exe has stopped working

  I'm loading Jewel quest games on my computer.  Whenever I start a window appears which says setup.exe has stopped working - please help if anyone has any ideas to try

  Hi shellyart,

  ·         What is the exact error message?

  ·         Have you made changes on the computer before this problem?

  ·         What version of Jewel Quest you trying to install?

  Follow these methods.

  Method 1: Run the game as administrator.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-allow-an-application-to-run-once-with-a-full-administrator-access-token-in-UAC

  Method 2: You can also try the game in compatibility mode and check if it works very well.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Method 3: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting steps, follow step 7 in the link to return the computer to a Normal startupmode.

  For reference:

  Quest http://www.Microsoft.com/Windows/Compatibility/Windows-Vista/Search.aspx?type=Software&s=Jewel

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-mark-an-application-to-always-require-a-full-administrator-access-token-user-account-control

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs

• In Vista, error "FINDFAST. EXE has stopped working and needs to close. "

  I get continually comes a msg as FINDFAST. EXE has stopped working and needs to close. What is this reference to? Liu

  Hi LaurieHead,
   
  -When exactly you receive this error message? It is to start the computer or when starting any application?
   
  We will put the computer in a clean boot state to identify the application at the origin of this problem:
   

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• 34957172.exe has stopped working and was closed. Windows error message

  Since the installation of Service Pack 2 for Vista, I receive the following error message that causes my computer to freeze - "34957172.exe has stopped working and was closed.  A problem with the application to stop functioning properly.  Windows will notify you if a solution is available. "How can I solve this problem

  Hi SherriTeille,

  (1) what is you receive the exact error message?

  (2) when exactly you get the error message?

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link

• get the message "setup.exe has stopped working" when trying to install labview 2011 or 2012 on a windows machine 7

  When you try to install labview 2011 or 2012 on a windows machine 7, I get a message "setup.exe has stopped working". I tried to run setup.exe as an administrator with the same results. I have Microsoft .NET Framework installed on the affected machine 4.5.1. Could be the cause of this problem? Or does anyone know the root cause of this error?

  Hi - are you getting it at the beginning of installation, during or after 100% progression ended?

  Is it fair to LabVIEW you install, or is it drivers too, in this case, what was the last big package that has been installed at the time?

  This can be caused by the NVIDIA chipset driver:

  https://decibel.NI.com/content/message/46299?TSTART=-130

  Thank you
  Sacha