Windows vista stuck in mode hibernation, then received error/BOOT/BCD file.

Windows vista stuck in mode hibernation, then received file error/BOOT/BCD, Oxc000014c of the State. I inserted the Windows Vista disc to plant but it goes back to the previous message.

Hello

Turn off the computer if it has not been extinguished because it started and wait 5 minutes so there
is a complete reset of the material.

See if this applies:

Error message when you resume a Windows Vista Service Pack 1 or Windows Server-based
2008-based computer after hibernation: "Windows failed to Start.
http://support.Microsoft.com/kb/95752

----------------------------------------------------------------------------------------------------------

More troubleshooting:

/ Settings (BIOS/CMOS) often F2 so watch the screen as it starts - set boot order for
1 CD/DVD so it can boot the disk - you don't want to not install Windows - you want to repair.
Don't forget to put it on hard drive first of all when you do not want to start on the DVD.

Try the Startup Repair tool

This tells you how to access the System Recovery Options and/or with a Vista disk
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

Try Options recovery or a disk of Vista startup repair.

How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html

----------------------------------------------------

If the above didn't help:

At the prompt of the startup disk:

Bootrec /fixmbr

then

Bootrec /fixboot

See if you can boot from the hard disk

If this isn't the case, restart on Windows drive:

At the prompt of the startup disk:

CHKDSK C: /f /r

----------------------------------------------------

If necessary this 'peut' help: (not the same error however it may be useful)

Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing.
required information.
http://support.Microsoft.com/kb/927391

==============================================================

If no help, the assistance of a computer store real (not the leeks and glances at a Best Buy or another Big
Box stores) or system manufacturer support.

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Tags: Windows

Similar Questions

  • When you install windows vista service Park 1, I have received an error code 80073712 with 13% downloaded only?. Can you help me to complete this process?

    When you install windows vista service Park 1, I have received an error code 80073712 with 13% downloaded only?. Can you help me to complete this process?

    Hi Gore EzekiahTongun

     

    You can see the steps in the below mentioned article Microsoft and verification.

    http://support.Microsoft.com/kb/947366

     

    I hope this helps.

  • Cannot start windows Vista in safe mode.

    I followed these instructions to start Windows 7 in safe mode:

    I tried to start windows vista in safe mode by using the following:

    1. Click on the Windows icon in the left bottom of the screen while Windows is running in normal mode.
    2. Click on the arrow located to the right of the lock at the bottom of the popup menu symbol
    3. Choose "restart".
    4. I restart the computer, press the F8 key and hold.  I tried at the beginning of the sequence to reboot and after that the light appears on the mouse, but still before the windows logo appears.
    5. Restart the computer in normal mode.
    6. I tried the key down and also tried pressing the F8 key several times both giving the same results without success.
    7. To eliminate the possibility of a bad keyboard, I switched from keyboards with the same results.

    Can you tell me what I am doing wrong?

    You tap f8.

    You can have a F-Lock key in the upper right corner of your keyboard.

    http://www.bleepingcomputer.com/tutorials/tutorial61.html

    Read the other way at the link above.

    Table of contents > Vista.

    See you soon.

    Mick Murphy - Microsoft partner

  • Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

    Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

    error 0 x 80070017 data ERROR_CRC des 2147024873 (cyclic redundancy check).

    The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation.

    Clean the system (compensation to all Temp/Tmp folders and included the content delete all offline, the TIF browser, Cookies, compensation do a disk cleanup.)

    Click the Start button. In the search box, type Disk Cleanup, and then in the list of results, click Disk Cleanup.

    Maybe some interviews, try to run the "chkdsk/r" command at the command prompt

    Check disk or Chkdsk is disk error checking in VISTA. It can be used to verify orruption and optionally repair errors and bad sectors on the hard disk.

    How to run Checkdisk at startup CHKDSK

    http://www.Vistax64.com/tricks-n-tips/67612-checkdisk.html?LTR=C>

    Run SFC/scannow

    File system (CFS) auditor checks all files in Vista are where they should be, and that they are not corrupt.

    WHY: You want to ensure that the base operating system files have not been damaged or changed.

    How to fix and check the integrity of system files of Vista with the System File Checker: SFC/scannow

    http://www.Vistax64.com/tutorials/66978-system-files.html>

    04/01 / 1107:15: 20:00

  • In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and the second time error code 8007000D

    In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem

    0X8007000D ERROR_INVALID_DATA

    Try to manually download the update and installation
    http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basic

    It will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services

  • We monitor windows servers using pdh.dll and we receive "error PDH 0xc0000bc6:9 - > data are not valid" a few times in the meantime.

    We monitor windows servers using pdh.dll and we receive "error PDH 0xc0000bc6:9-> the data is invalid" a few times. Need to understand what causes this and how to fix the same.

    Hello

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

    http://social.technet.Microsoft.com/forums/en-us/winserverManagement/threads

    Hope this information helps.

  • Update for Windows Vista Service Pack 2 (KB948465) repeatedly fails - error Code 80246007

    Update for Windows Vista Service Pack 2 (KB948465) repeatedly - fails error Code 80246007.  BITS ok - Microsoft 'Fix' detected 'problems' and 'fixed '.

    them, but the update continues to fail.  Any help would be appreciated.

    Hello

    Perform the steps from the link below and see if it helps.

    How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

    Hope this information helps.

  • Windows Vista stuck in update 3 of 3 loop after updates.

    updated the title: Can not boot Vista after updates

    I'm stuck in the update 3 of 3 loop and cannot restore my system by using the system restore or the Vista CD... Can anyone help? Y at - it a solution or should I reinstall?  thanksRemember - this is a public forum so never post private information such as numbers of mail or telephone!

    Hi royfos,

    Do you have a code error message when you try to run the system restore?

    Check if you can get into safe mode. If you manage to get into safe mode, then you can run the restore of the system from there. Otherwise, another option is to perform the Startup Repair.

    Method 1: Troubleshooting Safe Mode

    Step 1: Start the computer in safe mode

    Safe mode is an option of troubleshooting for Windows that starts your computer with only basic services and features.

    To get into safe mode, check out this help article: , start your computer in safe mode

     

    Step 2: Run system restore

     

    For complete help, see this article:System Restore: frequently asked questions

    Note: If you use system restore when the computer is in safe mode, you can not undo the restore operation. However, you can run System Restore again and choose a different restore point if any.

    Method 2: Startup Repair

     

    Startup Repair is a Windows Vista recovery tool analysis of missing or damaged system files that may prevent Windows from starting correctly. Run it and see if that fixes the boot problem.

    Reference:

     

    Startup Repair: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

     

    Also take a look at this article to learn more.

    The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

    http://support.Microsoft.com/kb/949358

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Vista stuck with "update configuration".

    Whenever I stop Windows Vista, System stucks with "Configuring updates" appearing on the screen.

    The original post has been read.

    The original post has no importance now.

    What you do not understand, is that you now do a logoff and reboot for a fresh start of windows.

    The problem should be gone because the download folder has been emptied.

    and if the problem is still there, start the system in safe mode and then rinse the folder download again.

  • Windows Vista stuck on 'if please do not turn off or unplug your machine. Installing Update 1 of the 17... »

    My another Windows Vista machine has been slain on "if it please do not turn off or unplug your machine. Installation of update 1 of 17 "for 4 hours. I need to close because it's my phone and I travel NOW.

    How can I stop the update and close?

    http://support.Microsoft.com/kb/555375>

    It helps those answering questions if you provide:

    What version of windows (32-bit or 64-bit) and service pack level.
    you use what browser (exact version).
    What application or antivirus security suite is installed and your current subscription?
    What third-party firewall
    What anti-malware software can be installed.

    · What are the updates that you try to install on the system?

    If the update has failed then try these steps and check if that helps. I suggest you to let us know the number of KB updates.

    Step 1

    Uninstall the updates failed program and features, follow these steps

    a. open Control Panel from the start menu

    b. Select programs and features

    c. click View installed upgrading

    d. uninstall the update failed

    Step 2:

    Reset the component of windows update and then try to install updates, check if the problem is resolved.

    How to reset the Windows Update components

    http://support.Microsoft.com/kb/971058>

    Step 3:

    Install the stand-alone package containing the updates. You can download the stand-alone version of the below link with number:http://www.microsoft.com/downloads/en/default.aspx> and check if the problem is resolved.

    For more information click on the link below.

    The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

    http://support.Microsoft.com/kb/949358

  • Update for Internet Explorer 8 Compatibility mode list for Windows Vista (KB982632) cannot install with the error details: Code 80070490 & also update for Windows Vista (KB981793) with the details of the error: Code 80070490

    I am running windows vista Home premium, on a system 32-bit HP Pavilion dv9700 op.  I have internet project 8 service pack 2 of windows and norton security suite installed on my computer.  I do not understand why these 2 updates keep do not install unless it didn't, but they are listed under important updates in the windows updates, can you please help me, maybe I don't have not enough memory on the left?

    Thank you!

    Windows Update error 80070490

    If you receive the Windows Update 80070490 error, it means that a file (CBS Manifest) that is needed to install updates is corrupt. To correct this problem, you will need to repairWindows. RepairingWindows will not damage your personal files or the programs that are installed on your computer.

    The System Update Readiness Tool for Windows can correct some conditions that causeWindows Update error 80070490. You can access and run this tool by reading this http://support.microsoft.com/kb/947821 on the Microsoft Web site.

    If the system update readiness tool solves the problem, you need to repairWindows. RepairingWindows will not damage your personal files or the programs that are installed on your computer.

    Once you have completed the repair, you will need to restart Windows Update to install updates are not included on the installation DVD. RepairWindows, follow these steps:

    1. Close all programs and restart your computer.

    2. Insert the DVD into your disc drive. Wait for the installer to start. If the installation program does not start automatically, follow these steps:

      1. Click on start and type Drive: \setup.exe in the search box. ReplaceDrive with the letter of the DVD drive of your computer (for example, D:\setup.exe).

      2. List programs, click Setup.exe.

    3. Click on install now.

    4. Click go online to get the latest updates for installation (recommended).

    5. If you are prompted to do this, type the Windows product key.

    6. What type of installation you want? window, click upgrade.

    7. Once the installation is complete, restart your computer, and then run Windows Update.

    If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Gateway GT5622 Windows Vista family premium turns black then freezes and needs power close button

    I had this problem once before at least a few days until I deleted my dual boot and reinstalled windows and now I'm having the problem everywhere once again have reinstalled windows at least 2 weeks without problem until today.

    Entire screen turns black without mouse or keyboard, a few times it starts without a problem, but then the keyboard will not work if I put in password sometimes it will be repeated at least 5 start-up.

    I even tried running in safe mode with network and it is the first time that it would work at least 3 safe mode with network start-up. When I started it upward it said that windows has recovered from a stop down and he says one of the error is a blue screen.

    Hi DawnReneesReaders,

    1. were you able to reinstall Windows Vista without any problems?

    2 have you tried a Format installation?

    3. are you able to boot into safe mode with networking?

    Unplug all external devices connected to your system (except the keyboard and mouse) and check if it helps.

    If you are able to boot to the desktop in SafeMode with networking, then try to perform the following steps:

    You can perform a clean boot and check if it helps.

    A clean boot to check if startup item or services to third-party application is causing this issue.

    You can read the following article to put the computer in a clean boot:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.

    You can check the event viewer about what is causing the problem.

    Open event viewer

    What are the information contained in the logs of the event (Event Viewer)

    If you are able to boot into normal mode, visit the computer manufacturer to install the latest version of the drivers for the chipset, display, network, and other devices and see if it helps:

    Updated a hardware driver that is not working properly

    Update drivers: recommended links

  • Windows Vista stuck at 67% in stage 3 to restart after standalone install service pack 1

    I installed the stand-alone version of service pack for Vista on an AMD System powered with Asus motherboard running Windows Vista 32 bit home edition Basic.  The service worked well and seemed well until you restart. It has reached stage 3 and stopped at 67% and no response. I have run the system for 12 hours before running a forced reboot. I have restarted from the Vista DVD and have tried system restore and automatic repair. All have brought me back to the same place. I also tried to boot into safe mode with the same result. I am able to read the disc from a command prompt, and made a chkdk as well.

    Hi SteveRegier,

    You can try to rename or remove pending.xml from the startup folder on Windows Vista disk and check.

    a. Insert the installation disc.

    b. restart your computer.

    c. click on the Start button, click the arrow next to the button lock and then click on restart. If you are prompted, press any key to start Windows from the installation disc.

    Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings.

    d. choose your language settings, and then click Next.

    e. in the System Recovery Options menu, click command prompt

    f. at a command prompt, type the following command and press ENTER

    g. type cd C:\windows\winsxs, and then press ENTER.

    h. type ren pending.xml pending.old, and then press ENTER.

    Restart the computer and check.

    Hope this information is useful.

  • Windows Vista goes to sleep and then wakes up immediately at the login screen

    Original title: sleep function appears just right back to the login screen

    When I use the sleep function on Windows Vista (the switch icon to the left of the lock in the start menu), the system go to the start screen, but a few seconds later, the computer comes back, says "Recovery Windows" and then displays the password login screen.

    I scanned the computer many times for viruses (using McAfee), but found nothing.  Is there a way to tell the computer to sleep and have it actually do?

    -HE'S

    When I use the sleep function on Windows Vista (the switch icon to the left of the lock in the start menu), the system go to the start screen, but a few seconds later, the computer comes back, says "Recovery Windows" and then displays the password login screen.

    I scanned the computer many times for viruses (using McAfee), but found nothing.  Is there a way to tell the computer to sleep and have it actually do?

    -HE'S

    See if the following can help you...
    Start button > Panel > Classic view > Power Options > click on change power settings > click on advanced editing powersettings > scroll down until you see Miltimedia parameters, click the plus sign (+) sign in front of > again once, click the (+) sign sign in front when media sharing > on battery shoud read " allow the computer to sleep ".
                                                     Sector should read " allow the computer to sleep ".
    If they aren't, it must 'prevent the idling to sleep' or 'allow the computer switch to Away mode. Click on it, you should see a pointer on the far right, click on it and select allow the computer to sleep.
    Click OK when finished.

    t-4-2

  • Windows Vista stuck business suite Please HELP!

    Hi I have a huge problem with windows vista professional right now. then I woke up this morning I turned on my laptop and then it booted up and got just the usual stuff. then she suddenly said please wait... so, in the person of unexpirienced computer I am, I restart the computer and the same thing happens. I have therefore restart again and go to safe mode. safe mode starts very well, so I turn it off and restart the laptop. again, it has the same please wait... So, I start waiting. while I wait, I turn on my little book to find an answer. I have been unsuccessful to find an answer until now. Finally, the sign waiting please goes but it only shows nothing else. Windows vista professional it says on the bottom and the usual context of vista, but nothing else. so I jut turned it off and am now waiting for a response. Please someone help?

    Hi I have a huge problem with windows vista professional right now. then I woke up this morning I turned on my laptop and then it booted up and got just the usual stuff. then she suddenly said please wait... so, in the person of unexpirienced computer I am, I restart the computer and the same thing happens. I have therefore restart again and go to safe mode. safe mode starts very well, so I turn it off and restart the laptop. again, it has the same please wait... So, I start waiting. while I wait, I turn on my little book to find an answer. I have been unsuccessful to find an answer until now. Finally, the sign waiting please goes but it only shows nothing else. Windows vista professional it says on the bottom and the usual context of vista, but nothing else. so I jut turned it off and am now waiting for a response. Please someone help?

    Hey Rocky671

    "just took me to the usual stuff.

    What was the usual stuff

    1st thing to try is a restoration of the system in safe mode

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer'shardware be listed. When you see this information begins to tap the F8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista .
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not read this information

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc.

    Change boot order it do dvd drive 1st in the boot order

    and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

    Contact the computer manufacturer and ask them to send vista recovery discs

    they do it for a nominal cost of $

    also ask them if you have a recovery partition on your hard drive to get back to the way you bought

    you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

    Ask them of the exact key sequence

    Walter, the time zone traveller

Maybe you are looking for

  • Pages 09' (v. 4.3) on macOS Sierra?

    Pages c. 4.3 will work with macOS Sierra?

  • Impossible to install the latest version of Skype on Windows 7 Ultimate SP1

    Greetings, I am the only user of Windows 7 Ultimate SP1 Administrator on my laptop, and until last night, my Skype worked very well; but trying to update today, he told me that I had no sufficient privileges to go to C:\Program Files (x 86) \Skype\Ph

  • Satellite P10 804: Toshiba Power Options - how to disable Hibernation

    Model SP10 - 804 How to turn off the Hibernation feature? The 'Enable Hibernation' box is checked and grayed out so I can't uncheck it!I don't use this feature and would like to delete the hiberfil.sys file that is beyond 1 GB. I understand that by d

  • I don't get a security code

    Hi everytime I try to access my account, I am invited by microsoft saying sent it a code to my email. I never receive any code independently hw many times I send it back. Help

  • Cannot open my MSN from May4th e-mail

    Count of May 4 I couldn't access my MSN account I sent support and answered all the question when it ask security answer there is not question showing? I havae my account more than 15 years there at - there someone who can give me advice as to who to