Windows Vista taskbar becomes unusable. If clicking on something other than 'error' beep start. Reseting solves the problem, but there must be a permanent fix. Solvable?

Windows Vista taskbar becomes unusable. If clicking on something other than 'error' beep start. Reseting solves the problem, but there must be a permanent fix. Solvable?

Hi Comintern,

·         Did you do changes on the computer before the show?

·         You receive an error message or error code?

Follow the suggestions below for a possible solution:

 

Method 1:

 

Step 1: Start in safe mode and check if the problem persists.

Start your computer in safe mode

http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

 

Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

http://support.Microsoft.com/kb/929135

 

Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

http://www.Microsoft.com/security/scanner/en-us/default.aspx

 

Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

Let us know the results.

Tags: Windows

Similar Questions

  • Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to fix it?

    No Option to install repair - SAD

    Hello

    Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.

    I recently had a problem where Vista Business 64-bit would only boot to a black screen with a mobile cursor - KSOD.   Who, in searching the Web I found is a fairly common problem with Vista.  I discovered that my only option was about to reinstall Vista CLEAN and all the other programs I had installed under it.  I can't believe that Microsoft released the 'repair installation option"similar to that of Windows XP, where you can hit the"R"key during installation and we left with nothing but the"System Restore"options and"Startup Repair ".  Neither of which has helped in my situation.  Since then, this was a dual system boot with XP Pro, then any restore point has been removed from the partition to Vista anytime, I started another recognized problem, by Microsoft, which Microsoft has made no significant effort to fix, in addition to recommending that you hide the partion Vista in XP - a whole of XP.  That beats a little the entire purpose of dual boot.

    As I tried to start in safe mode, it left me at the same point as a normal boot - black screen with a cursor.  I tried ctrl + alt + delete and nothing. Two Windows RE options did not help me.  This left me no option but to the completely reinstall Vista.   Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.. Please don't tell me that it is because Vista uses an image file instead of an installation as XP system.   I see no other reason for not allowing the upgrade of outside BONE in addition to Microsofts greed and paranoia that he can transform the operating system easier to install illegally.  I hope that some third party has actually changed the Vista installation routine to allow you to install Vista on itself, because as it is, it's really hard for me to even recommend Vista as the operating system or install any where else, if not the only recourse after loading OS, is to reinstall completely.

    Adobe, Autodesk, and almost all other software publishers... allow you to perform a "REPAIR" of their software installation, if something prevents you to load after installation.  Even MS Office has a routine repair.  Ms has an internal version of the Setup routine which allows outside the OS upgrade option that you want to "Upgrade" / repair? ".  If not, why?

    -Todd w.

    "Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair."

    «.. . After using XP's repair function, the operating system itself would become less stable and frankly not in a good state of repair. »

    As Todd, is the answer.

    "This response does not hold water as on one of my computers I've been running Windows XP for about four years now, after a repair install.

    Then, you were lucky.  Try to replace the system files on a computer that does not start even at a desk or safe mode usually will get a return to office, but will probably repeat the same problem in a few weeks.  Tech professional would only use this function to retrieve the data before a complete reinstallation.

    "I thought that this area was a place to really get answers instead of the ole same"answers of bs that are on all the other forums."

    It is a place that will try to help you fix your computer if you have problems.  It has technicians in computing, no decision-makers, developers or executives.  We will try to answer technical questions about problems you might have with Windows Vista.

    If you want to have input on the future of Microsoft operating systems, then help you beta-test and provide feedback to the developers.  Windows 7 and IE 8 are currently in beta.

    Another possible place you could make suggestions which could see the developers would be:

    https://connect.Microsoft.com/default.aspx

    Brent
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How I support windows vista on cd to reinstall it on my other computer that wont start up. He's wiped and there is no recovery disk.

    ? How I support windows vista on cd to reinstall it on my other computer that wont start up. He's wiped and there is no recovery disk.  It also has stickers with license numbers.

    Hello

    There is no download free and legal Internet for vista

    Here are the different ways to reinstall vista

    Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

    they do it for a nominal cost of $

    also ask them if you have a recovery partition on your hard drive to get back to the way you bought

    you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

    Ask them of the exact key sequence

    or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

    Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

    they contain all versions of vista

    This is the product key that determines which version of vista is installed

    http://www.theeldergeek.com/Vista/vista_clean_installation.html

    How to replace Microsoft software or hardware, order service packs and replace product manuals

    http://support.Microsoft.com/kb/326246

  • Windows is not genuine, so I'm following the steps here to solve the problem, but I can't find "system services" on the computer! What should I do?

    I can't find "system services" on my lap!

    my windows is not genuine, so I'm following the steps here to solve the problem, but I can't find "system services" on the computer! What should I do?

    Hello

    1. what you trying to do?

    2. were there any changes (hardware or software) to the computer before the show?

    Click on the link below, if you receive the message that Windows is not genuine and see if the problem persists.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/Windows-is-showing-as-not-genuine/6efea9fd-70a9-4530-88c8-93fd7b2d5484

    Hope this information helps.

  • When you use windows 7 or XP on my two computers will not allow me to attach picture files. Get an error message saying to see the details, but there is no detail.

    When you use windows 7 or XP on my two computers will not allow me to attach picture files. Get an error message saying to see the details, but there is no detail.  This has happened when I changed service providers

    When you use windows 7 or XP on my two computers will not allow me to attach picture files. Get an error message saying to see the details, but there is no detail.  This has happened when I changed service providers

    ===================================
    Try to visit the support site of your new service provider
    and search for instructions on how to set up your email.

  • My costs only 79 battery life after I clicked on something other than the spose to extend life

    OK, so I was just on my Samsung laptop then something pops up saying you want to extend your life of the battery, or something in that sense and it is a program that has been in the computer from the beginning. I found the autonomy to extend it and it works and now it will no longer charge 79% and I can't go back to this program because I forgot the name thank you.

    Hello

    Thanks for posting of queries on Microsoft Community Forums.

    I would like you to follow the methods provided to solve the problem:

    Method 1: Solutions to common battery problems

    http://Windows.Microsoft.com/en-in/Windows7/solutions-to-common-battery-problems

    If the problem persists, please run the system restore.

    Method 2: Restore the system

    http://Windows.Microsoft.com/en-in/Windows7/products/features/system-restore

    If you need help with windows, just tell me and we will be happy to help you.

  • Vista cannot restore unable system start to solve the problem - can not find an error code.

    On May 25, 2013, my computer Vista was off not correctly.

    The power of Vista computer was suddenly cut.
    Then, I can not start the computer normally.
    The guard computer loop right on these screens when I choose normal reboot:
    1 splash screen
    2 screen telling me to choose the restoration of the normal restart or system
    3. (after choosing normal restart) a black screen
    4. a blue screen with a few words but it flashed too quickly that I can't read any word. ---> TO 1
    I tried restarting the system once, but the Vista computer has always failed to start.  What should I do?

    Hello

    1. You're able to boot in safe mode?
    2. What is the brand and model of the computer?

    We will disable the auto reboot first. It prevents Windows from automatically restarting if an error of Windows to fail. Choose that this option only if Windows is stuck in a loop where Windows fails, attempts to restart, and fails again repeatedly.

    Now give us the exact error code?

    You can also make reference to: what to do if Windows does not start correctly

    Important: The data available on bad sectors may be lost when chkdsk attempts to repair your hard drive.

    Please post back with the State of the question.

  • Install Flight Simulator 2004 without problem. Click the icon to start and receive an access denied - error how can I solve this problem?

    I use Vista Home. I have installed and uninstalled 2004 before without any problem. This is a first. I also did a system recovery to determine if it would solve the problem, but it didn't.

    Hello

    Try right-clicking on the icon and run as administrator

  • I have the Windows Vista operating system. Whenever I connect my computer, I get two pop ups on the taskbar. One is jucheck.exec and another is updates of Java.

    I have the Windows Vista operating system. Whenever I connect my computer, I get two pop ups on the taskbar. One is jucheck.exec and another is updates of Java.

    I have no way to uncheck the premiera. I have only two options, restore or close. With java, I opened the properties and click to remove the check mark from updates, you click on apply and then clicked on ok, but he still continues to appear you have tips on how can stop these pop ups?

    Hello

    I would like to inform you that Jucheck.exe is the process that runs automatically when the Java Update tool is activated. Jucheck.exe usually checks the Internet for the software updates available and invite you to install them to keep your updated program. If you prefer to search and download the Java updates manually whenever you want, disable Java Update automatic tool disables and removes Jucheck.exe

    It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  • I have the Hello, I have a Windows Vista Business OP, 32-Bit - I'm not able to use my CD/DVD player - "the message,"Please insert the disk"as much as I insert a disc."

    What do you think could beb solution?

    I tried a solution by Microsoft, but I could not find filter lower or higher in the right pane - so I had to give up.

    See below;

    Windows Vista

    1. click on Start

    Collapse this includes this im

    and then click all programs.

    2. click on Accessoriesand then click run.

    3. type regeditand then click OK.

    Collapse this includes this image

    If you are prompted for an administrator password or a confirmation, type the password, or click allow.

    4. in the navigation pane, find and then click the following registry subkey:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    5. in the right pane, click UpperFilters.

    Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters . If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step 8.

    6. in the Edit menu, click delete.

    7. When you are prompted to confirm the deletion, click Yes.

    8. in the right pane, click LowerFilters.

    Note If you do not see the LowerFilters registry entry, unfortunately this content can't help you. Go to the section "next steps" to learn how you can find more solutions or more help on the Microsoft Web site.

    9. in the Edit menu, click delete.

    10. When you are prompted to confirm the deletion, click Yes.

    11. exit the registry editor.

    12 restart the computer.

    Delroy

    Hello

    There are several methods to check the high low filters and maybe it's not yet the real
    the cause of the problem.

    -------------------------------------------------------------------------------------------------------------------

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • x 64 Windows Vista Update Agent is terminated abnormally with an error 80070424 and reset of the agent is not successful.

    I searched through of many post about problems with Windows Update Agent unusable for Vista 64 computer x which I maintain on a volunteer basis for a not-for-profit organization. I tried the following that I found in various articles in the knowledge base:

    1. Requests for assistance MS FixIt suggested performance. They have all failed when installing the PowerShell.

    2. replace officers update the page that provides the installation program. Installation always eventually fail.

    3. According to the remittance advice to Update Agent, found at https://support.microsoft.com/oas/default.aspx?gprid=6527&st=1&wfxredirect=1&sd=gn

    Advice, to #3 was informative since some commands manual regsvr32 *.dll reported errors where the dynamic link library wouldn't "load" or the administration server could not find a certain "entry point". Does that mean that these dll is corrupt and must be replaced. If so, how he does it. It doesn't seem practical in more aggressive steps suggested to reset the agent given that the errors occurred using the less aggressive path.

    The computer I'm servicing came with Vista delivered, and the original disks are not available. The Startup Repair utility reported no errors or corrections. In addition, sfc/scannow only reports an error indicating it cannot successfully completed his task. So, I don't know how I can successfully restore these dynamic link libraries.

    I thank you for any advice you can give and forgive me if I don't have enough to search the knowledge base for an answer that already exists. Have a great day.

    Once again thanks for your response. I spent more than 20 hours on this computer and I wonder if the upgrade with Win 7 (or 8 when available) will solve the problem.

    I am a volunteer system to this nonprofit administrator, and my suggestions to secure computers are not always accepted. Thus, they probably will not disconnect the computer from the network. I suggested that personnel limit only accounts and that we establish a security policy for computers and a "standard" image However, each clerk vetoed my suggestion. I note only about one-tenth of a vote on all business issues. I have little to say in what is done. I do mostly what I said and I work what they deem is a technical miracle occasionally.

    I will suggest they buy an upgrade if this should solve the problem, since I can't spend much more time on this issue. If this does not resolve the problem, they work with what they have, because they would not listen when I told them that they should not install all these products of third-party software "free." I told them that if it is not Oracle (formerly Sun), Microsoft or Adobe don't install it. Their products cover everything they need. We cross our fingers and hope that nobody issues a 'format c:' command remote computer impaired!

    Have a wonderful day.

  • If I do a full reformat on my Vista laptop, is what will solve the problem - "Windows cannot check for updates" error code 800FFFF? Frustrated!

    I have a laptop that I use mainly for cloud computing and travel.  I have much stored on the hard drive itself and I spent hours trying to solve the problem regarding

    Windows can't check for updates, error code 800FFFF.

    I tried some of the recommendations varied on this site, but so far without success.

    If I just wipe my computer, and then start reinstalling everything from below upwards, will that solve the problem?  I know it sounds drastic, but I'm willing to do, and hopefully learn something in the process.

    I'm not computer specific read and write... so it would take me hours, wading through all the different corrections before as I find one that works.  That's why I'm considering a reformat.

    I checked for malware and repeatedly tried to system update readiness tool.

    Any thoughts?

    Some information on my system:

    OS: Vista Edition Home Premium
    Version: 6.0.6002 Service Pack 2 Build 6002
    Model: Inspiron 1525
    System type: X 86-based PC
    Processor: Intel Core 2 DUO CPU
    The version of the BIOS/date: Dell Inc. A16, 16/10/2008
    SMBIOS Version 2.4

    Hello Jason.

    I suggest you try the following:
     
    close and exit all the open documents or windows program you have open.
     
    Open Internet Explorer (only!) go to http://support.microsoft.com/kb/923737 
    [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.
     
    Note => for best results, check the option to remove personal settings.
     
    NEXT
    1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].
     
    1B. make disappear/close the pop-up window "automated troubleshooting! -then...
     
    c. 1, without taking into account any warnings similar, or '' not recommended '' run difficulty he 50202 in DEFAULT mode (if on a race later you still have the same failure, then repeat the above & select aggressive mode).

    2. closing of the session and restart the cool system & then run manually check the updates in Windows Update, etc, etc...
    When you get to Windows Update, a custom scan updates. Take (accept) those marked critical or Important.
     
    If it has updates Silverlight or Net Framework, select not them and leave it for one pass later.
    Those that are marked as "optional" decline.
     
    Have infinite patience so that it scans and it's work.
     
    When you are prompted to restart Windows, please do. Allow it to restart.

    If you still have a failure and you just did a Fix - IT in the default mode, date back to 1 a/1 c and now this time make the default mode AND aggressive mode (both) and retry Windows Update again

    Note: Running aggressive mode difficulty he 50202 will result in a loss of the history of the update but will not affect the actual installed updates.

  • Windows service install is missing from my Windows Vista Home Premium, 32-bit system, after uninstalling other software (IOLO System Mechanic)

    Windows service install is missing from my Windows Vista Home Premium, 32-bit system, after uninstalling other software (IOLO System Mechanic). After a month of looking for the installation Service, I finally found that a group of 10 files and among them was this executable file
    x86_microsoft-windows-p... installerandprintui_31bf3856ad364e35_6.0.6002.18005_none_d83fb8abf30e1638_printui.exe_bb673fff
    If these are the files I'm looking for, what should I do to get them back to where they should do? Any help would be appreciated...

    System Mechanic is your troublemaker & you have lots of company! [1]

    See my colleague Maurice RESPONSE message in this thread: http://answers.microsoft.com/thread/d6fedf33-dc1b-451f-9aab-97429f916180

    If still no joy, contact System Mechanic (iolo.com) supported for assistance-, they are well aware of the problem posed their candidacy.

    TIP: If you think that more never your registry database needs to be cleaned, repaired, boosted, to the point, healed, twisted, fixed, magnified, "swept" or optimized (and even more to convince that it is not), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  • I have 2 versions of windows vista running on my computer. One is before it crashed and it took all the RAM (Ram)

    I can't clean the discs because I can't load any programs because the memory has faded.  So I can not put a page of my computer desktop or download programs, I need to get my images that I have on the other program running.  I can't open one of these programs because I don't have the authorization even if I was always the user and administrator.  What I would do.  Can I add more memory Ram?  Can I remove the old stuff that I can't open anyway.  DLLs etc.  I downloaded vista 2pr, but it does not work.

    Hello

    Here is the information from your other question here about it:

    "I can't collect any information of my system information page."  When I connect I get redirected to a page that asks me what version of vista I want to open.  One is Microsoft vista and the other is windows vista.  The Microsoft is the only one that works. The other takes me a blank page. »

    "I have 2 versions of windows vista running on my computer. One is before it crashed and it took all the RAM (Ram).

    I suggest that you save your data and reinstall the operating system properly.

    There are several methods to reinstall Vista.

    See what methos works for you.

    There is no Windows Vista downloads available from Microsoft.

    You can contact your computer manufacturer and ask them to send you a set of recovery disks.

    They should do this for a small fee.

    To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

    You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

    How to change the Boot order in BIOS:

    http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

    "How to replace Microsoft software or hardware, order service packs and replace product manuals.

    http://support.Microsoft.com/kb/326246

    And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

    The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

    Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

    Ask them to the proper key sequence.

    And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

    Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

    If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

    Some manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • Windows Vista 32 bit OS. Corrupt or missing files and error msg "invalid parameter."

    Windows Vista 32 bit OS. Corrupt or missing files and error msg "invalid parameter."

    Original title

    I don't understand what you mean by "title". You want a test?

    Hello cock.

    Please see the TechNet wire which may be related to your current number:

Maybe you are looking for