Windows Vista - unidentified network Local Access only tried everything please help

Similar Questions

• unidentified network - local access only

  Hi, so I have this old Sony Vaio for four years, I used a wired internet connection for the past four years, until what we moved house and received a wireless router. our friend connected to me, and everything worked well, until I had to format the system. I tried the troubleshooting, looked through various forums, but nothing helps, like many, I understood what to do. I reset the router and it works fine on the netbook to my mom, but on the vaio, it says unidentified network - local access only. just to add, it uses a system windows vista Home premium.

  Hi Zuzanna Feliszek,

  Method 1: You can follow the steps mentioned in the link below to retrieve the Winsock2 corruption
  

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista
  http://support.Microsoft.com/kb/811259

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  
  Method 2: you can follow the steps described in the article below, which deals with a similar question

  Network connectivity fails when you try to use Windows Vista behind a firewall device
  http://support.Microsoft.com/kb/934430

  
  Method 3: download and install all Windows Update available (Service pack (SP) 1 and 2)
  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

• Unidentified network Local Access only on Vista Home Basic using Ethernet.

  Have 2 laptops not identified network Local Access only on Windows Vista Home Basic.  One is a Toshiba and the other is a Dell.  I can use the Ethernet on the Toshiba to one of the The Fire Dept. I work at. (From lastweek, haven't checked since.)  I can't go to the other Station.  Get Local access to the unidentified network only.  I get also home and when I checked the Dell, get the same message.  I can connect wirelessly.  How can I solve the unidentified network problem?

  Hello

  If your system is running Hello , Netmagic or any other party 3rd network try to uninstall.

  Try also.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type route delete 0.0.0.0 press ENTER.

  Type ipconfig/flushdns press enter

  Restart your computer.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I have 2 laptops and one desktop. Desktop & laptop are very good. 2nd laptop computer cannot access the internet. I get a message media disconnected. I tried everything please help. I use Windows XP

  I have 2 laptops and one desktop.  Desktop & laptop are very good. 2nd laptop computer cannot access the internet. I get a message media disconnected. I tried everything please help.  I use Windows XP

  Hi JessaRoy,

  · The computer connected to the network or are they computer autonomous?

  · What is the number and the model of the computer?

  · What is the service pack installed don the computer?

  · What is the full error message with the error code, that's all?

  · What are the steps you tried to solve the problem?

  Try the steps from the link below: to test TCP/IP connections by using the ping and the commands net view: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/sag_tcpip_pro_pingconnect.mspx?mfr=true

  With regard to:

  Samhrutha G S - Microsoft technical support.

• 32-bit of Windows Vista unidentified network

  I have a older laptop that I've had it about 3-4 years now and there are a few days, I've started having network problems. I get the network identified and only the local message from the network management center that I can connect to the internet via ethernet, but I really need wifi. I really don't want to give up this laptop since its treaties me well enough and works well at the time of th outside these folds of network.

  If you need additional information, I am willing to give it just ask.
  Thank you
  David

  Hey Josh-H,

  I already did, but the good news is I just need to upgrade the card through the center of update, fortunately I was able to connect to the local network to download and install the update.
  Thanks anyway! Its good to have this system in place and running :D
  -David

• Impossible to get Fallout 3 to run Windows 7. Tried everything, please help!

  So I literally disappeared EVERYWHERE and tried EVERYTHING and still not get my FO3 work :/

  I did the d3d9, tried every compatibility, fixed parts of the .ini I was supposed to and even tried the affinity. NOTHING WORKS. It still crashes very quickly once I have created a new game.

  If you have any other suggestions please let me know. I'd really like to play my FO3 :/

  Here is my card if they help:

  OS: Win 7 Home Premium 64-bit
  Model: Dell Inspiron N4110 (laptop)
  Processor: Intel (r) Core i3 - 2310 M CPU @ 2.10 GHz, 2 100 Mhz, 2 Lossnay, 4 logical processors
  RAM: 4 GB
  Graphics card: Intel HD integrated Graphics

  I know, that he should not have to do with my graphics card, because I know people who also have the game works very well with an integrated graphics card. Thanks in advance! ^_^

  
  And please no mods who just copy and paste the same answer to every question... I want to help legitimate working :/

  "I know that he should not have to do with my graphics card, because I know people who also have the game works very well with an integrated graphics card. Thanks in advance! ^_^"

  Just to unravel the terminology. There is no 'card' with integrated graphics. There are
  chips on the motherboard for some, but the graphics card Intel are part of the cpu.
  As with graphics cards, Intel HD graphics card not all are created equal, so if your machine doesn't have the same processor as the 'other' it doesn't have the same onboard graphics.
  You cpu has HD3000 graphics that should be enough run the game, but you have
  starting with some settings and resolution and work your way to the top if the game runs OK.
  In addition, the different laptop models have a different amount of VRAM dedicated, then
  If your model has only 64 MB of VRAM, it is less likely to work the game.
  If your machine is not the same brand and model and does not have the same software
  configuration settings and system as the 'other' it can not be compared accurately.
  Many small things add up to a big difference.

  Describe the crash - lock-up, black screen?
  Screen black accidents are common with FO3, and anything that can be done is to try and
  minimize them. camera comes with the question of four cores, or by using the settings too high.
  It can also be your anti-virus. Try disabling that before launching the game.

  "And please no mods who just copy and paste the same answer to every question...". I want legitimate help that works :/ »
  This is done especially in the absence of details ("my game not start what to do?)
  in the original post.
  You have to start somewhere and the cut and paste is generally these steps which must always be taken. There are no shortcuts to troubleshooting, and assuming that "which can not be she" can lead to more frustration, especially after several hours of stuffing about to find that's all (* headbang *).
  It said that some of the answers cut and paste are not yet on the subject, but it is a
  Forum of the community of civilians, would be nice.

  Ok then.
  -You tried the 'quad cord fix? You don't need with a dual core cpu and use
  may be counterproductive. Like the game runs better on two hearts he can also help
  to disable hyperthreading on the cpu, that two "virtual" cores more equals four.
  -That you have installed the game using Vista sp1 compatibility mode. (Note I said installed)-
  -You have installed the Windows 7 codec pack to solve the problem of ffdshow, or used another
  method.
  -You have installed all Windows updates
  -The game has been patched and you have not yet installed mods.
  -You do not use Anti-aliasing, Bloom, HDR or V-sysnc (which use too many resources for your HD graphics card).
  -Do you have a pagefile (virtual memory) enabled?
  -What parts of the .ini correct you?

  Clean boot is a viable option for troubleshooting software conflicts are always a potential-
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Review the programs that you can run after you start in Windows as a potential
  Thus the conflicts. With minimum specifications, you need minimum stuff running while
  play the game. None of the browsers open, etc.
  Time to clean boot (or just by running msconfig) and clearing the check box next to
  any program in the Startup tab that you don't need to run in the background when loading Windows you can reduce the amount of resources used during the game.
  It may be a permanent framework. There are a lot of software that thinks it's important enough
  to start with Windows, do not...

  For more ideas try the forums Nexus-clicky and list in detail what you have tried,
  or risk all reread the same suggestions.

  You can also find something useful in the Guide to Tweak FO3 - TweakGuides.com
  .

• IV volume + iv tried everything, Please HELP!

  IV TRIED EVERYTHING BUT MY LAPTOP HAS NOT EITHER VOLUME! I WOULD LIKE TO HAVE SUITABLE ANSWERS. THIS JUST HAPPENED TODAY BEFORE IT WAS FINE!

  Hi Kathleenhiggins,

  ·         What version of Windows are you using?

  ·         Is it the limited issue only with Internet Explorer?

  ·         What are the troubleshooting steps you have already tried?

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  In the meantime you can view the below article for help.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Reply with more information about the issue so that we can help you better.

• Webcam not found - tried everything, please help!

  I can't get my webcam to be detected in any program, I've tried so far. I have a laptop ASUS. It has an internal webcam. This webcam, used to work. He says its fine all in Manager devices etc. Just that when I go to use Skype or whatever it is he just does not detect it. Have you tried the pilot - says update latest driver is installed etc...

  I thought that maybe my internal webcam is broken, so I bought a new external webcam, just a generic brand name. It does the same thing. Everything seems fine, he detected, it installed, it, she worked in my device manager, the driver is up to date etc... just says: "no webcam not detected" when I come to use it... I have tried everything that I can think and read other peoples troubleshooting questions etc, still cannot solve this problem...

  Is it a secret "disable webcam" button a hand I could have pushed and forgotten or something? I'm full of ideas... Thanks for any help.

  Hello Rhuben,

  Thank you for your response.

  I appreciate your time.

  I suggest you to update BIOS and drivers from the chipset of this link and check.
  Reference:
  https://www.ASUS.com/support/download/3/336/0/1/LUFmeP8fwFruEdH7/30/

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Please keep us updated.

  Thank you

• I need information on windows xp, I can't install Itunes. Has anyone dealt with ituneshelper.exe Itunes must be reinstalled Windows 7 error message? I've tried everything. Help, please!

  I have an ipod shuffle (first-generation) OLD. My system is Windows XP service pack 3. Computer behaving badly. If for any reason I can't install ITUNES without the error message 7 missing Itunes helper.exe need to reinstall Itunes. I tried many methods to address them. I can't use my IPOD or Itunes.  Please someon point me in the right direction. Thank you angella

  Hello

  · Brief us with the steps you tried to solve the problem.

  I see many users ITunes with the same concern. According the apple forums, this error is caused if SQLite3.dll is missing.

  For assistance on the issue I suggest you to post your query in the ITunes forum. Link: https://discussions.apple.com/community/itunes/itunes_for_windows

• unidentified network and local access only

  We have a wireless connection and our router is realtek. However, our network is unidentifyable! He said that it is a public network and gives local access only. When an ethernet cable is plugged into our computer to the router connect to the local network overrides this and we have local and internet connection.

  What is the problem that causes our network to not be recognized? I tried to diagnose and repair and renew the IP address, and none of these work.

  Its very frustrating...

  Thank you
  Christina

  Hello CJ135,

  Please make sure that your computer is configured toe "obtain an IP address automatically".

  Open (run as administrator) command prompt and enter the following commands...

  -netsh winsock reset

  -nbtstat - rr

  -netsh int ipv4 reset

  Restart you computer *.

  Method 2

  If you would please check that you have installed SP1 you Vista computer and on the XP computer you have installed SP3?  So that you can make networking 2 computers successfully, they must be on the latest Service packs.  Just click Start and right click on computer and go to properties.  This will tell you what Service Pack you are running.  While windows are open.  would you please check the name of working group on both computers.  It is imperative that all the computers on your network are on the same workgroup.  For example, Vista default workgroup is labeled "Task force" and working XP Group is labeled "MSHOME".  So that both computers to interface with success, the workgroup name must be the same.  In addition, please make sure that 'everyone' has full control on the folder and the shared folder.  If you please you would follow with me as best as possible, I'd be very happy.

  Method 3

  If you have a 3rd party software such as Norton or Mcafee security, disable temporarily and attempt to connect.

  Please check if you are able to connect to the internet.  If you please you would follow with me as best as possible, I'd be very happy.

  Thank you

  Aaron Griffin
  Microsoft technical support

   

• Windows Vista Home Basic 'local only' access via ADSL router, broudband

  Hello

  I've set up a new router broadband wireless ADSL to connect to my broadband PostOffice.com existing Standard.

  The router is a Belkin F7D1401uk Surf N150 model.

  It is facing up and running and I can use other machines to connect to the internet through it. A netbook running Windos XP SP3 and a mobile phone (Nokia X 6), but my laptop main running Windows Viast Home Basic SP2 (32 bit) do not have wireless internet access.

  It is a Fujitsu Siemens Amilo Li 2727 laptop. If I connect to the new Belkin router using an ethernet cable, I can connect to the internet. But when I unplug the ethernet cable and turn on the WiFi I see a connection to the modem Belkin Wireless, but on an 'unidentified network' and with 'local access' only.

  Here is a copy of what I get when I run "ipconfig/all" at the command prompt:

  Windows IP configuration

  Name of the host...: Clare-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: Belkin

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. : Belkin
  ... Description: Atheros AR5007EG Wireless Network adapt
  Physical address.... : 00-16-44-E8-64-2C
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::4d89:e63c:ba6c:1c4d % 11 (Preferred)
  IPv4 address: 192.168.2.3 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: April 3, 2011 15:59:55
  End of the lease...: May 11, 2147 00:41:44
  ... Default gateway. : 192.168.2.1.
  DHCP server...: 192.168.2.1.
  DHCPv6 IOOKING...: 268441156
  DHCPv6 DUID customer...: 00-01-00-01-13-A7-2B-7F-00-1F-16-00-9E-C4
  DNS servers...: 192.168.2.1.
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : Belkin
  Description...: Realtek RTL8101E Family PCI - E Fast Ethernet NIC (NDIS 6.0)
  Physical address.... : 00-1F-16-00-9E-C4
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 7:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 12:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : Belkin
  ... Description: isatap. Belkin
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  So, it looks to me that use wireless I have an IP address and the default gateway and DNS servers are correct.
  But I do not understand why I "local access" only.

  Can anyone suggest what I can do to get my laptop connected wireless to the internet please?

  Kind regards
  David

  Hello Ttard,

  Thanks for your post.  One of the solutions, I saw about this problem is to go to your system manufacturer's Web site and download / install the latest driver for your computer wireless.

  This thread is very long, but has some great troubleshooting in steps.

  Please let us know if this information helps with your problem.

  See you soon

• Local access only on wireless network

  My laptop (Toshiba Satellite L350-203 with Vista SP1 HPE) has lost the ability to connect to the internet using my home network. I have McAfee Internet Security and charge of IE8, but both were present before the problem appeared. My home network is now displayed as 'unidentified public network' and the laptop has "local access only". He seems unable to keep the WEP key for the network as it asks everytime I try to connect. I confirmed that the WEP key is correct. There are 3 other computers in the House that connect without a problem, so I guess that the router is not the source of the anomaly. I tried accessing another network to another place (with any necessary safety information) but get the same result, so that other computers can connect successfully. I am able to access the internet via an account mobile broadband (using a "dongle"), but I added this account after the problem appeared, so once I don't suspect it as being the culprit. Diagnosis in the "network and sharing Center" routines are unable to solve the problem, so any help is most welcome.

  Roy Mac

  Hello Roy Mac,

  Thank you for using the Microsoft Windows Vista Forums.

  You receive an error or the error codes when you try to connect?  You're obviously network savy upward so if something seems repetitive please ignore, you tried to delete the location and replace?   Is there any software for the high account mobile broadband that could changed settings?  Are you able to connect to the router with an ethernet cable access to the internet without problem?

  A wireless network uses authentication and encryption to help stay secure. Authentication controls access to the wireless network. Encryption helps to ensure that malicious users cannot determine the contents of wireless data frames.  Windows Vista includes a new wireless network configuration setting. The new setting indicates whether a wireless network is broadcast or not broadcast. You can also use the new configuration setting that a Windows Vista wireless client connects to a non-broadcast network.

  I've added two links below one for Microsoft and one for the installation of networks and networks the Toshiba site.  Please let us know status.   Thank you!

  The software that you used with Windows XP to connect to wireless networks is not compatible with Windows Vista. Alternatively, you can use Windows Vista to configure wireless networks.

  To connect to a wireless network in Windows Vista, follow these steps:

  1. click on Start

  Collapse this includes this image

  , then click on connection to.

  2. click on the wireless network you want to connect, and then click connect.

  Note During the connection process, you may be prompted for a key WEP Wired Equivalent Privacy (). If you do not have this key, contact the network administrator to help wireless.

  For more information about connecting to wireless using Windows Vista, see the Microsoft Web site at the following address:

  http://TechNet.Microsoft.com/en-us/library/bb878035.aspx

  How to connect to a wireless network in Windows Vista
  http://support.Microsoft.com/kb/928429/en-us

  Toshiba.support:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/outFrm.jsp?ofId=AskIris&SearchString=wireless+connection+Vista

  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Local access only after the Network Systems Security 2009 malware removed

  I'll try to put all the details that I can here, but my laptop that has the problem cannot connect to the Internet so I won't be able to copy paste n info. Last week, I was struck with the 2009 malware security systems. It was a pain to remove because it stopped all the work programmes and I could not install malware removal software. Finally beat him by renaming the main program folder 2009 for the security of the systems. That he has stopped working when I restarted the laptop and then I was able to install the malware removal software and took remoped.

  Here is the problem. Now that he is gone my network connections wireless and wired no longer work. I get local access only on an unidentified network. I have Windows vista Home premium and use internet with a modem model Cableone cable Motorola Surfboard SB5101.

  Then I called a cable tech support first and they could not help and after all the service works very well on my desktop the same modem and connection. So I called Motorola tech support and they had me do a lot of things for hours (including reinstalling the drivers for the modem) on the phone without effect. Finally, they suggested that I have re-download all ACER Aspirion z9410z drivers and reinstall them. So I did it. Copied to a flash of my desktop drive and reinstalled them. No luck.

  The respectable and sharing Centre, explains that the modem works correctly when you look at the status. But the auto for windows diagnostic tool says to check the IP settings automatically and reset the network card. The two fail to trouble when ran. Here are all the parameters of the network connection.

  Physical address: 00-1A - 66 - AA - 64cB
  Active Yes DHCP
  Autoconfiguration IPV4 address 169.254.195.250
  IPv4 mask subnet 255.255.0.0
  Net Bios on active TCP/IP Yes
  Link-local IPV6 address fe80::1878:12 d 5: a566:c3fa % 36
  Servers of DNS IPv6 fec0:0:0:ffff:1 1%
  FEC0:0:0:FFFF:2 1%
  FEC0:0:0:FFFF:3 1%
                                                  
  IPv4 and 6 are defined automatically detect the IP address and the DNS.

  Hope that gives enough information. There no mater if I use eithernet and USB to connect or wireless. I have the same problems.

  Another thing that can be part of the problem.

  It started after removing the systems security 2009 malware as well.

  When loggin, turned off the laptop, a blue error screen appears. Here are the details generated for it. I'm working on the research of which the question is to be set by the online search.

  Event name BlueScreen
  OS version 6.0.6000.2.0.0.768.3
  local ID 1033
  BCCODE one
  BCP1 00000016
  BCP2 0000001 B
  BCP3 00000000
  BCP4 82028768
  OS version 6_0_6000
  Service Pack 0_0
  product 768_1

  I hope I will get this fix as well.

  Any help will be greatly apprieciated. If more information is required only, let me know and I'll get it.

  Thank you all.
  Jason

  Hello Oxilas,

  I suggest that you use a friend/co-worker Vista DVD and do a repair installation.

  Repair facility:

  You can reinstall your copy of Vista while keeping your files, settings and programs by performing a repair install or an upgrade on the spot with the following steps: (Note: this still does not resolve all problems, especially if the corruption was caused by a 3rd party program or service, you may need to do a clean install) (if this is not successful.)

  <><><><><><><><><><><><>

  Please make sure that you back up all the important data before you continue. Please visit: methods for your backup files.

  Always make sure that you have the means to reinstall your programs, or by an installation disc or access to the installation files.

  <><><><><><><><><><><><>

  1. Insert the Windows installation disc in your computer's DVD or CD drive. You must start Windows installation while running your existing version of Windows.

  2. on the Install Windows page, click install now.

  3. on the get updates for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.

  4. on the Type your product key for activation , we strongly recommend that you type your 25-character product key in order to avoid problems during activation.

  5. on the page Please read the terms of the license , if you accept the license terms, click I accept the terms of the license.

  6. to the which type of installation you want? page, click upgrade to begin the upgrade. You can see a compatibility report.

  7 follow the instructions.

  Note: If your installation disc doesn't include SP1, and you are updated, then you must uninstall it before proceeding with an update install. Start-> Control Panel-> programs-> see installed updates, then select Service Pack for Microsoft Windows and click on Uninstall.

  Note: Tit the following settings is reset by default:

  Its computer system

  Device drivers

  Visual effects

  Windows Mail

  Windows services

  If you notice missing files after the upgrade, look in the following folders:

  C:\Windows.old

  C:\$INPLACE.~TR

  C:\$WINDOWS.~Q

  These files can be eliminated with disk cleanup as "records destroyed by upgrade to Windows".

  Delete files using disk cleanup

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network.

  I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network.  I have Ping www.microsoft.com and the answer is "ping request could not find host www.microsoft.com.  I am connected to the network wireless through my iPad and can connect via my smartphone. This leads me to believe there is only something configured properly on my laptop. Can anyone provide assistance?

  Hello

  You can try a system restore...

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  .. .choose time, until this problem (you may tick to show more older restore points).

  Tricky

• Local access only under vista on HP Pavilion

  I recently had problems getting a wireless connection with my laptop (Pavilion dv6700) running vista. I had previously run it for 2 years without problem, but after returning from Sweden (where there is still no wireless connection problem), I was often only able to get a local access. Is not on all networks - my University library system works very well, for example, but the personal network of my apartment as well as the network of my parents, as well as a local coffee shop that I had previously connected to fine, only get local access.

  I saw it is a common problem, but have not seen a definitive solution, so I was wondering if someone could help?

  Hello

  Method 1:

  I suggest you to follow the article below for more information onsetting up a wireless router and check if it helps to solve the problem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

  Method 2:

  I also suggest you follow the article below about to set up a wireless network and check if that helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Method 3:

  Also, follow the steps in troubleshooting from the link and check if that helps

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 4

  Try troubleshooting from the link and see if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Also refer to:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/wireless-connections-with-Vista-local-access-only/75eb9192-238f-4ADB-9303-3d40bccbf399

  Hope this helps