Windows Vista updates suddenly stopped working and the message appears to me to be the victim of pirated software - error: 0x80070426

Similar Questions

• My computer keeps showing random parts "suddenly stop working" and the computer needs to reboot - I think it's a virus.

  I have a problem when occasionally and randomly my computer components apparently all of a sudden "stop working and must close ' which translates into my computer restart itself. This happens a lot, but I can not associate with any particular issue, as it changes each time. I think it's a virus, but nothing seems to be wrong, it's just the inconvenience. I had the computer more than a year and nothing wrong with it. The only other common thing is a program called "twonkymedia" seems to be on my pc and "must be closed", but I can't find anywhere to remove it.

  It's driving me crazy now, as can happen at any time during the game, work or other passtimes of the computer.

  Hello

  1 make thorough scrutiny for malware and don't forget no one program intercepts all methods of overkill use so much.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-ID/default.htm

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows Vista - all programs 'stopped working' and nothing does not open. McAfee is also not working and the help and support center/internet does not open even

  On my windows vista computer, whenever I turn on my computer and log on, none of my programs work. An error message appears saying that the program has stopped working and windows will try to find a solution to the problem.  The problem is that the help and support center opens either. None of my internet programs to be open, and the same error message for all. We have tried to turn off DEP, and that did not help. My computer is connected to the internet (2wire) but is not able to run due to the problems with my computer. I scanned my computer with windows defender, and we found no problem. Help, please

  Download the McAfee tool to remove it. Use it in safe mode.

  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  Reboot and install MSE.

• Windows Vista - all programs 'stopped working' and nothing does not open. McAfee is also not working and help and support center does not even

  On my windows vista computer, whenever I turn on my computer and log on, none of my programs work. An error message appears saying that the program has stopped working and windows will try to find a solution to the problem.  The problem is that the help and support center opens either. None of my internet programs to be open, and the same error message for all. We have tried to turn off DEP, and that did not help. My computer is connected to the internet (2wire) but is not able to run due to the problems with my computer. I scanned my computer with windows defender, and we found no problem. Help, please

  Hi Anna1298,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 provided in the above article.

  Method 2: Try the SFC (System File Checker) scan on the computer.

   

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

  Method 3: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Let us know if that helps.

• Failure of KB967912 Windows Vista updated 10 x today and the computer can't access internet

  My new ACER Vista Office tried to install this update 10 x, today. It started while I was working this afternoon. Until that moment, I had a complete connectivity via a cable CAT5e LAN accessing a router and cable modem. Later, I lost the first internet and local network access. Before that, I had worked with Firefox, Windows Media, and financial software and everything was accessed successfully the ' net. Then, I tried to configure Microsoft Outlook 2007 to get my email. His inability to access my cable provider was the first idea I had that I didn't have connectivity.

  Each time, I had the exclamation point on the stop switch and Vista stops with the view that he was installing "Update 1 of 1. However, whenever I rebooted the update didn't install.  Also, I had to restart my modem and router every time to regain access to the internet for short periods of time; in less than 4 to 7 minutes, all access to the internet is lost again. The error code was Code BC2 the last couple of times, but before that I also got error Code 80200053 when an Office update also failed to install. (I was able to install the Office update successfully, after another restart and cycle the modem to regain power connectivity).

  Help! FYI, I had to find another computer even to post this question!

  Ann

  Hi AnnFr,

  Thanks for posting the question.

  The KB967912 refers to the essentials automatic updates. A workaround for this problem is uninstall all MSN "stuff", resettlement using the latest version, which includes this update.

  To download the latest version visit this site:
  http://download.live.com/

  Kind regards

  Cedric M

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• My computer has suddenly stopped working and the drivers are missing. Help, please.

  Original title: 05/01/2012 my computer stopped working.  all my device drivers are missing.  I tried the system restore and reinstallation of windows Os, nothing helps.  No matter what?

  Virus?

  Hello

  1. don't you update all drivers after reinstalling the operating system?

  2. have you done any hardware changes or software on your computer before this problem?

  You can follow this link to update the drivers & check if the problem persists:

  Update drivers: recommended links

  Hope the helps of information.

• all the screensavers suddenly stopped working... message appears "windows didn't start this screen saver.

  during an attempt to try a different screen saver in the control panel is available for all previewis

  Hi AlanAlan28

   

  1. did you of recent changes on the computer such as the installation of new devices?
  2. you try to use the downloaded screen savers or those that come with the operating system?
  3. do you get the error message for all screensavers?

   

  You can check in a clean boot state. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -

  http://support.Microsoft.com/kb/929135

  If the problem is resolved check which service non-Microsoft is the source of the problem; referring to article and following the other steps.

   When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

  I hope this helps.

• Windows Update, error: "Windows Modules Installer has stopped working and was closed".

  Whenever I run windows update, and try to install an update for Vista, I get the error message"

  "Windows Modules Installer has stopped working and was closed"

  . This has happened for quite awhile and I tried many suggestions on the web. If you do an internet search, you will see this seems to be a fairly common problem, but I can't find any official solution of Microsoft. I am afraid that I do not receive the latest updates and security patches so would like to help with this question.

  Thank you

  Luke

  Hi guys

  I had installed up-to-date antivirus software and my problem seems to start after an update from Microsoft. Do a search on the web and you will see similar stories. I spent so much time trying to solve this I think it's better just to do a re-install. Certainly not the resolution I had hoped, but appreciate this type of questions are almost impossible to solve the problems through intermittent mail such messages.

  Thank you

  Luke

• Windows Control Panel has stopped working and cannot read the CD

  Original title: windows control panel has stopped working

  When I went to install my Rosetta Stone program it showed Windows has stopped working and then installed the program and when I put the cd in my computer saids windows control panel has stopped working and cannot read the cd

  Hello

  You say "Control Panel has stopped working" or "Windows Explorer has stopped working"?

  Follow the steps mentioned in the article below and check if that helps:

  Start the computer in a clean boot state

  Start your computer in a clean boot state, and check if your computer is able to read the CD. Start your computer in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Error: 0xc0000005, installer of Windows modules stopped working and the launch failed password

  Original title: Hello,.

  my Dell computer is running the following errors: 0xc0000005, modules Installer Windows stopped working and the Word failed to launch. I need help with this.  My system is Vista Home. Thank you.

  Hello Ewazn,

  ·         You get this error message only when you launch Microsoft Office applications or launch any application?

  You can view the article in the Microsoft Knowledge Base and check if it helps.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Please elaborate on the question so that we can help you in a better way.

• Microsoft Windows Spooler SubSystem App stopped working and was closed, rises whenever I starts and sometimes my printer driver or the printer disappear!

  Whenever I start my computer when desktop comes up, I get this msg from Microsoft Windows: Spooler subsystem App stopped working and was closed. Most of the time I can still print but occasionally (when I need to print) my printer is missing, and the driver is not installed it is said. I got my printer mfg reinstall constantly for the last 2 weeks because of this problem! Peut anyonehelp!

  Try this:

  http://support.Microsoft.com/GP/printing_problems

• Internet Explore has stopped working, and a message saying that a problem led the program to stop working correctly. Windows willclose the program and notify you if a solution is available is appear

  Internet Explore has stopped working, and a message saying that a problem led the program to stop working correctly. Windows willclose the program and notify you if a solution is available is appear

  On the desktop, you can open the Action Center under the taskbar > maintenance > view reliability history > view all reported issues

  You can right click on some of the mistakes "Stopped working" "Internet Explorer" > view technical details

  What are the details of the errors?

  There is a 'Copy to Clipboard' link at the bottom.

  Paste the information first in Notepad and then copy the Notepad information to post here.

• I get an error at the start of the ambient light.  Windows indicates the RL has stopped working and the banner "catalogue Lightroom-opening: OYL6BMP.» LRCAT displayed?

  I get an error at the start of the ambient light.  Windows indicates the RL has stopped working and the banner "catalogue Lightroom-opening: OYL6BMP.» LRCAT displayed?  I reinstalled LR but no change.  Anyone can shed light on this issue?

  Gary

  The only effective solution is to reset the file preferences... it has been damaged by trying to create a catalog with the invalid jpeg.

  The instructions to reset the catalog are here: given to zero (or "Screw up") the preferences of Lightroom - Lightroom Forums file

  When you have done this, place you and double click on the correct catalog and LR should then start OK.

• AFN Updater has stopped working and was closed

  Original title:

  AFN Updater

  I get the following:

  AFN Updater has stopped working and was closed

  A problem with the application to stop working properly, Windows will notify you if a solution is available.

  The message stays all the time.  It has something to do with a phone, what can I say, but do not know how to get rid of it.

  Any suggestions?

  C

  Hello

  Search in the two programs and features and uninstall or look for a boot entry.

  "How to use MSCONFIG in Windows Vista"

  http://www.netsquirrel.com/Msconfig/msconfig_vista.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• Windows Vista Basic has stopped working on my laptop.

  After my recent updates, Windows Vista Basic has stopped working on my laptop.

  After my recent updates, Windows Vista Basic has stopped working on my laptop.

  Hey shousell

  stoppped working covers a lot

  If you can not start, follow these steps

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  or transfer your question in forum windows update link below

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller