Windows Vista will be preform no updates anyone can help, thank you

Windows Vista will be preform no updates anyone can help, thank you

Hello

1. what happens when you try to run Windows Update? You get an error message? If Yes, what is the exact full error message?

2. you have made no changes to the computer before the broadcast took place?

3. is the specific question of an update?

Method 1:

Run Windows Update Reset (aggressive mode):

http://support.Microsoft.com/kb/971058

Now, restart the computer and check the update.

Method 2:

Run an analysis of auditor of system files on your computer and check for the issue.

How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

http://support.Microsoft.com/kb/929833

Method 3:

Download the update system analysis tool version of operating system and control accordingly.

http://support.Microsoft.com/kb/947821

How to check the updates failed:

If you access windows update by clicking the Start button to in address bar type windows update and click on enter, click on updates of the review, and it will show you what that is either installed or not updated.

If the problem remains even in collect and send the Windows Update log.

 

Follow the below article to collect the log file:

 

http://support.Microsoft.com/kb/902093

Use SkyDrive download collected files and post screen/image capture

http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65/

Hope the above information is helpful.

Tags: Windows

Similar Questions

  • Windows Vista will not download or update.

    Hello, I tried to download Adobe Reader and Yahoo Messenger, but I keep getting error messages. I use Windows Vista on my laptop. I tried to download/upgrade to other programs such as MSN messenger and Itunes, but downloads fail. In addition, my windows update cannot check the updates. I don't know if the two is linked, but can someone help me please. Thank you in advance.

    Hello

    You we never provided these error messages to help you properly.

    Malware will stop access you Windows Update and cause other problems.

    Scan of Malware in Safe Mode with network.

    http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    Once in Safe Mode with network, download and run RKill.

    RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

    http://www.bleepingcomputer.com/download/rkill/

    Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

    http://www.Malwarebytes.org/products/malwarebytes_free

    See you soon.

  • Can't access webcam asus x54c windows 7 64 read as driver update but can help start

    Can not open the webcam.  On the audit of the records of system device drivers (asus usb2.0 webcam) to day but unable to initiate or find anywhere else

    Thank you for your quick response.  I was not very keen on any of these attempts, but I called ASUS support to another problem.  They said that the webcam works only if launched in a specific program (SKYPE = TRUE); Windows live movie director = TRUE.

    Yes, as far as I'm concerned: problem solved.
    Thanks again.
  • Windows Vista will not install new updates after installing SP2

    Hi, I have a problem with the update of my windows. It started after a fact a factory reset. Here's the history:

    I have a some what old laptop (8 years). It came with a Vista installed with service pack 1 installed at the factory. Over the years, I did a few factory resets (every 2-3 years). I never had problems up to now. What is happening now is that I can not exceed SP2. I tried two different ways, none of them worked. After the reset, I first uninstall a bunch of stupid programs that came with the laptop, and then defragment and then have two ways to proceed. I tried to use windows update, installed more than 100 updates, updates install held until finally I offered service Pack2, installed successfully but then no more updates were offered. Then I tried a different approach - a new reset, uninstall, Defrag, and then downloaded and installed SP2 directly from the Download Center. And again the same thing happens. From the SP2 installation I check updates, download the new update agent and nothing happens after that. He keeps looking for new updates all day (about 50% of the processor by using all the time).

    I read some articles and discussions but could not find anyone with the same problem (most of the users reported some error codes which is something I can't do). I tried the fix tool - it does nothing! Whenever I run it, it is mistakes - sometimes 2, sometimes up to 5. Sometimes, it makes account all fixed, other times that it reports missing or corrupt files do not set. Whatever the results if I restart and when I try to check for updates again it is still the same story.

    Also I tried to install it manually IE9 as soon as SP2 is installed (I understand that this is not supported under SP1) but the installation fails. I expected to be available in updates, but as I don't get updates I tried to install it myself. Not sure if it's related (although I guess it is), but the Defender is not able to verify new definitions either.

    Any suggestions? Maybe the registry is damaged or some of the files using the update agent is are corrupt? There are currently no antivirus program installed that could block whatever it is. I haven't touched Windows Firewall somehow everything must therefore be attributed to the default values.

    You understand is that? I came across exactly the same problem... restoration of an old book to give to a family member, and every time I came to the point of installing SP2 and a more recent windows update agent just after, I couldn't install more updates. It would block 'check updates' forever. Tried twice, same problem. However, I tried some things differently the third time and exceeded the question.

    Let me know if you still need help, and I will respond with what I've done.

  • SP2 for Windows Vista will not install. Receive error 800b0100 code. Windows Update has encountered an unknown error.

    SP2 for Windows Vista will not install. Receive error 800b0100 code. I already tried all possible solutions - disabled and even uninstalled McAfee Firewall disabled, ran the CheckSUR repeatedly (see below for the final analysis), tried to install from windows update, also downloaded the stand-alone MS pack, tried selective startup and hidden States of services, still nothing. It has been 2 days work on this. Help, please!

    =================================
    Preparation of control system was updated.
    Binary version 6.0.6002.22202
    Package Version 6.0
    2009-10-24 12:36

    Checking Windows Service Packages

    Checking of manifests package and catalogs

    Checking package Watchlist

    Watchlist checking

    Checking packages
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum

    Control components store

    Summary:
    Seconds executed: 1241
    Found 4 errors
    CBS MUM lack count: 4

    Unavailable repair files:
    servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat
    servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.cat
    servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.cat
    servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat

    Hello Yiratr,

    Thank you for using the Microsoft answers Forums.

    Solution:

    Follow the steps in the web link below.

    http://support.Microsoft.com/kb/956702

    That should do the trick for you.

    Thank you.

    Kind regards

    Augustine.

    "URGO".

    UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

  • my windows vista will not update or accept any download error code 800700cb

    my windows vista does not accept updates or tried any download error code 800700CB can someone help pls?

    Hello

    (1) what is the exact full error message?

    (2) is the specific question of an update?

    (3) remember you to make changes to the computer before the show?

    You can try the following methods and check the status of the issue.

    Method 1:

    Troubleshoot problems with installing updates.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Method 2:

    Disable your security software installed on the computer and try to install the updates.

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

    NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  • My Windows Vista will be able to do a permanent upgrade to Windows 7 If this isn't an activated version?

    My Windows Vista allow not even put it in my contract. I raised this issue with Microsoft here: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/windows-authorization-failed/1eb76641-c316-4cee-b9f2-07822b2ca07d?page=1&tm=1331999060993#footer but have not yet followed the suggestions of the last answer. My windows is unauthorized. But with many errors that occur on the computer, some hardware (RAM) and other software, I thought that it would be better to simply upgrade to Windows 7. But before I'm ready to do a permanent upgrade, I need to know if a version of Windows Vista will be able to upgrade to Windows 7. A licensed version of Windows Vista was purchased by us, and a licensed version of Windows 7 will be bought when you're ready to upgrade. Is this possible? Or Windows Vista must first be authenticated?

    EDIT: upgrade is also done if all goes well to avoid having to go through the whole process to fix my problem with windows authentication as described in the last post on the link above.

    Hello

    You must set your original problem.

    Please meet Christmas Paton and PA bear.

    You need a legal active Vista operating system update since.

    See you soon.

  • Code 80072EE2 error when I try to update the update for Windows Vista (KB972145) tried to install on a week help someone?

    Code 80072EE2 error when I try to update the update for Windows Vista (KB972145) tried to install on a week help someone?

    sweetcheeks,

    0x80072EE2 ERROR_INTERNET_TIMEOUT http://support.microsoft.com/kb/836941/en-us

  • Update Windows (vista OS) never finished the update and keeps looping back to step 3.

    Windows Update was updated and the system was arrested by mistake.  When the system is turned back on, the update process began in stage 3, goes to 50% then completed, he stops, stops, restarts and returns to step 3, States repeats the process over and over again in a loop.

    What are my options?

    Hello

    I guess that part of the question could be a driver which is really old or similar should not be loaded.

    This exit Windows updates on (after you have access) and stop the updates of the driver to load.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ---------------------------------------------------

    You can use the solutions in this KB - 3 methods and I listed a little help for them below

    The update is not installed successfully, you receive a message, and the computer restarts when you try to
    install an update in Windows Vista
    http://support.Microsoft.com/kb/949358

    Method 1: Start Windows Vista with the Windows installation media and use the repair feature

    How to do a startup repair in Vista
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    You can also do a safe mode startup repair to access the Recovery Options If you have them available
    or use the DVD as described above.

    This tells you how to access the System Recovery Options
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    Method 2: Start the system in safe mode and then use the system restore feature

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can also do a restore of the system of starting with a Vista disk.

    Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
    x 64 64-bit.

    The update is not installed successfully, you receive a message, and the computer restarts when you try to
    install an update in Windows Vista
    http://support.Microsoft.com/kb/949358

    ------------------------------------------------------

    Once you are in Windows I was running once again reset here as a precaution.

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    Hope this helps sort it out for you.
    Rob - bicycle - Mark Twain said it is good.

  • How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you reconnect then wireless.

    problems with wireless Vista "local only".

    How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you then reconnect wireless... nothing else was changed on those computers and other devices can connect ok?

    Hello

    Each router is assigned to the specific address (called IP address or IP address). And each router maintains its own database (called as base of router) to follow the networking devices communicate with him. When the router is changed, the particular router is unable to detect the device, especially the network card to communicate with the computer.  Since he does not have details of the database of network devices, communicate with him.

    • You are able to access the Internet?

    Try the steps mentioned below and check:

    Method 1:

    Step 1: Enable or disable a network adapter and then check:

    http://Windows.Microsoft.com/en-CA/Windows-Vista/enable-or-disable-a-network-adapter

    Step 2: Run Network Diagnostic tool and check:

    Network connection issues: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

    Method 2: Wi - Fi and in Windows network connection issues:

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Reference links:

    Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based: http://support.microsoft.com/kb/947041

    Setting up a wireless network: http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

    Connection to wireless with Windows Vista: http://technet.microsoft.com/en-us/library/bb878035.aspx

    Hope it works.

  • Lack of updates - update for Windows Vista (KB2598479) security and an update of Cumulative security for Internet Explorer 9 for Windows Vista (KB2675157)

    I am running Vista/32 SP - 2.  2 updates fail - update security for Windows Vista (KB2598479) and updated security update Cumulative for Internet Explorer 9 for Windows Vista (KB2675157).  Downloaded and run Fix - It.  If the following message in the report - 'fix default locations of Windows Update does not work.  Wouldn't have known if I had not watched the details of reports since Fix - It said that everything had been fixed.  I tried to run Windows Update and Fix - It with the "run as Administrator".

    The suggestion of more optimistic that I see out there is reset the Windows Update components, but I have not been able to find out how to do this.

    I try next?  Thanks for the help!

    Hello

    1 did you change on your computer before this problem?

    2. what difficulty you are referring to?

    You can follow the suggestions and then check.

    Method 1

    You can download and run the system update readiness tool.

    Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
    http://support.Microsoft.com/kb/947821

    Method 2

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Method 3

    Step 1:

    Place the computer in a clean boot state.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a troubleshooting follow step 7: reset the computer to start as usual

    Step 2:

    Download and install the updates manually.

    Update security for Windows Vista (KB2598479)

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28605

    A security update cumulative for Internet Explorer 8 in Windows Vista (KB2675157)

    http://www.Microsoft.com/download/en/details.aspx?ID=29357&WT.mc_id=rss_alldownloads_all

    See also:

    Problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    You cannot install some programs or updates

    http://support.Microsoft.com/kb/822798

  • Windows Vista will not see Seagate 320 internal drive to format

    I bought a 320GB Seagate (7200 RPM) opportunity and I'm trying to install Vista on it. The computer BIOS sees the drive, but loading Vista it does not show the HD as an external drive and ask drivers for it. The disk has been previously formatted for Mac.

    Try to use SeaTools for Windows.  See also: Seagate Installation Assistance

    Please note that the hard drive needs to be internally mounted inside the computer because Windows Vista will not install on an external hard drive.

  • Windows vista home premium-inable install updates error code 80070005

    original title: windows vista error code 80070005 premium family

    My computer won't allow updates. Whenever I check for them I get the error code 80070005. How can I fix it? Ive tried a few fixes here and nothing works.

    Hello

    ·         What are the troubleshooting steps you have tried?

    ·         You get the error message with code 80070005?

    I suggest you follow these methods and see if it helps:

    Method 1:

    Try to install the update to the clean boot and check if it helps.

     

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135/en-us

     

    Note: Don't forget to start your machine in normal mode by following step 7 of the link.

     

     

    Method 2:

    You can try temporarily turning on all security software and then try the updates again.

     

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software


    Important note:
    Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

     

     

    Method 3:

    I suggest you to reset the Windows Update components and check.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Method 4:

    Follow the steps in the below article mentioned and look for the question.

     

    Problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Method 5:

    Error code 80070005 means generally that you're not quite allowed to install updates. Check out these articles from the KB and check if that helps.

    http://support.Microsoft.com/kb/816731

    http://support.Microsoft.com/kb/918355

  • Windows Vista will not accept my passowrd even if I put the password in. What should I do? I can't get into what it is.

    Windows Vista will not accept my passowrd even if I put the password in. What should I do? I can't get into what it is.

    Hello

    This article describes how to use the system restore feature to log on Windows 7 or Windows Vista when you lose access to an account.

    http://support.Microsoft.com/kb/940765

    If the above does not work

    I'm sorry, but we cannot help with forgotten passwords

    It is a policy of microsoft in these forums

    you need to reinstall vista

    http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  • Upgrade of hardware and now Windows vista will not be loaded. Stop 0x0000007B error.

    Can someone help me please.  I have improved my my CPU, motherboard, RAM and power supply and now Windows vista will not load I get a Stop error 0x0000007b.  I tried the two loading normally and safe mode and I get the same thing.

    Can someone help me please.  I have improved my my CPU, motherboard, RAM and power supply and now Windows vista will not load I get a Stop error 0x0000007b.  I tried the two loading normally and safe mode and I get the same thing.

    Hey Brian39

    If you change the motherboard that you normally have to reinstall vista

    your hard drive if you ever reinstalled vista contains the drivers for the old motherboard etc.

    and if vista is pre-installed you can not put the motherboard unless you do so in collaboration with the computer manufacturer

    If a retail license, you can change the motherboard

    but you will normally always reinstall vista for reasons

    Walter, the time zone traveller

Maybe you are looking for

  • Music on Apple TV video - not

    When I select the music app on Apple TV there is a white screen (slight figure at the back) with no icons at all.  Other applications such as movies, Netflix, etc work fine.  GEN 4.  Other home units work very well.

  • HP Pavilion notebook pc g6: its gel

    Hello The sound on my laptop freezing guard and actually doing a scraping noise during playback anthing. At first there was a message "display driver stopped responding and recovered." I don't know what it is all about. Any help in this matter is hig

  • Dv2: My pc has a poweron password

    I have a pavilion dv2-1010eo and I got a poweron password and I tried to reset the cmos Bettery and it's not helping

  • ICS INDIA update?

    Hi all, anyone know when ICS update will be available in India? Please update...

  • get a real of Editbox

    Hello I would get a real of an Editbox For example, I would type 10.51 and bring in my script. Right, now I get a string: "10.51. And I would like to convert it to a real use. How can I do? Best regards Frédéric