Windows Vista will not install new updates after installing SP2

Hi, I have a problem with the update of my windows. It started after a fact a factory reset. Here's the history:

I have a some what old laptop (8 years). It came with a Vista installed with service pack 1 installed at the factory. Over the years, I did a few factory resets (every 2-3 years). I never had problems up to now. What is happening now is that I can not exceed SP2. I tried two different ways, none of them worked. After the reset, I first uninstall a bunch of stupid programs that came with the laptop, and then defragment and then have two ways to proceed. I tried to use windows update, installed more than 100 updates, updates install held until finally I offered service Pack2, installed successfully but then no more updates were offered. Then I tried a different approach - a new reset, uninstall, Defrag, and then downloaded and installed SP2 directly from the Download Center. And again the same thing happens. From the SP2 installation I check updates, download the new update agent and nothing happens after that. He keeps looking for new updates all day (about 50% of the processor by using all the time).

I read some articles and discussions but could not find anyone with the same problem (most of the users reported some error codes which is something I can't do). I tried the fix tool - it does nothing! Whenever I run it, it is mistakes - sometimes 2, sometimes up to 5. Sometimes, it makes account all fixed, other times that it reports missing or corrupt files do not set. Whatever the results if I restart and when I try to check for updates again it is still the same story.

Also I tried to install it manually IE9 as soon as SP2 is installed (I understand that this is not supported under SP1) but the installation fails. I expected to be available in updates, but as I don't get updates I tried to install it myself. Not sure if it's related (although I guess it is), but the Defender is not able to verify new definitions either.

Any suggestions? Maybe the registry is damaged or some of the files using the update agent is are corrupt? There are currently no antivirus program installed that could block whatever it is. I haven't touched Windows Firewall somehow everything must therefore be attributed to the default values.

You understand is that? I came across exactly the same problem... restoration of an old book to give to a family member, and every time I came to the point of installing SP2 and a more recent windows update agent just after, I couldn't install more updates. It would block 'check updates' forever. Tried twice, same problem. However, I tried some things differently the third time and exceeded the question.

Let me know if you still need help, and I will respond with what I've done.

Tags: Windows

Similar Questions

  • SP2 for Windows Vista will not install. Receive error 800b0100 code. Windows Update has encountered an unknown error.

    SP2 for Windows Vista will not install. Receive error 800b0100 code. I already tried all possible solutions - disabled and even uninstalled McAfee Firewall disabled, ran the CheckSUR repeatedly (see below for the final analysis), tried to install from windows update, also downloaded the stand-alone MS pack, tried selective startup and hidden States of services, still nothing. It has been 2 days work on this. Help, please!

    =================================
    Preparation of control system was updated.
    Binary version 6.0.6002.22202
    Package Version 6.0
    2009-10-24 12:36

    Checking Windows Service Packages

    Checking of manifests package and catalogs

    Checking package Watchlist

    Watchlist checking

    Checking packages
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum

    Control components store

    Summary:
    Seconds executed: 1241
    Found 4 errors
    CBS MUM lack count: 4

    Unavailable repair files:
    servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat
    servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.cat
    servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.cat
    servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat

    Hello Yiratr,

    Thank you for using the Microsoft answers Forums.

    Solution:

    Follow the steps in the web link below.

    http://support.Microsoft.com/kb/956702

    That should do the trick for you.

    Thank you.

    Kind regards

    Augustine.

    "URGO".

    UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

  • Windows Vista will not install updates.

    I came across Best Buy, bought the first thing I have seen & to the left. It's just the small things. My main PC is myPC music recording studio (never online) so for my this, that I bought... I don't care.

    a m9402f 7.00 GB 64-bit system quad-core 2.30 Ghz procesor.  On the 626 GB on the 'C' drive, I only used GB 129.  I don't know why I've bothered w/a Seagate external extreem HD 1000GO?  Works great, I've never used one before Vista but works very well.

    Thus, recent updates do not keep install .  What's up with the updates? What is happening with this? Should I just go buy Windows 7?  I spend hours looking for solutions and never ask for help, but this time I am so tired so I'm going to ask.  Below are updates that keep a failure... Notice they're on SP2 * and IE8. My PC alread had installed SP2.  I tried an update for this.  I have switch from IE 7 to 8. I don't see any other reasons.

    Maybe I'm missing something?

    Update cumulative security for Internet Explorer 8 for Windows Vista for x 64-based systems (KB982381)

    Cumulative update for Media Center for Windows Vista for x 64-based systems (KB982480)

    Microsoft .NET Framework 3.5 SP1, Windows Vista SP2 and Windows Server 2008 SP2 Security Update for x 64-based Systems (KB979910)

    Microsoft .NET Framework 3.5 SP1, Windows Vista SP2 and Windows Server 2008 SP2 update for x 64 systems (KB982525)

    Microsoft .NET Framework 3.5 SP1, Windows Vista SP2 and Windows Server 2008 SP2 update for x 64 systems (KB982536)

    Microsoft .NET Framework 4 Client Profile for Windows Vista x 64-based Systems (KB982670)

    Update security for Windows Vista for x 64-based systems (KB978542)

    Update security for Windows Vista for x 64-based systems (KB979482)

    Update security for Windows Vista for x 64-based systems (KB979559)

    Update security for Windows Vista for x 64-based systems (KB980218)

    Update to the list of compatibility view Internet Explorer 8 for Windows Vista for x 64-based systems (KB982632)

    Update for Windows Mail Junk e-mail filter for x 64 systems [July 2010] (KB905866)

    Update for Windows Vista for x 64-based systems (KB981793)

    Update for Windows Vista for x 64-based systems (KB982519)

    A LOT of these updats were on UPDATE SP2 which was on my computer when I bought it, but they do not work...

    Others have to do with the "compatibility issues" for 32-bit web sites.

    .. and yes my stuff Adobe, Flash and Java are all kept up-to-date too.  Please keep in mind, I know how to get to these files support and update history and try to update manually and with each of them, the research questions and check forums, so I spend a lot of time doing this.  A lot of information is not new.

    Speaking of a new VISTA user...  My C drive has a file that says "Program Files (x 86) and this is where I go for all.»  What is it? It was my first VISTA computer. So forgive me... I'll tell you something about the music industry, but forgive me this ignorance.   Other folders have programs in the files of "program" and identical named files... What is so special about this (X 86)... I'm in 64-bit and sometimes still in 32 bit? capacity?

    My computer is compatible for Windows 7... should I go and buy and put an end to this? I could put it apart for just photo software stuff... Let me see it done 7 computers in the House.  sheeesh! Thank you... it's me now to lock up.

    "Talk of a new VISTA user...".  My C drive has a file that says "Program Files (x 86) and this is where I go for all.»  What is it? It was my first VISTA computer. So forgive me... I'll tell you something about the music industry, but forgive me this ignorance.   Other folders have programs in the files of "program" and identical named files... What is so special about this (X 86)... I'm in 64-bit and sometimes still in 32 bit? capacity? »

    Hello, I run the servers at my work, and systems are 64-bit.  It would be just that sometimes your system needs to do things differently running 32-bit.  Not sure why they choose to divide them, but that's how it is on my servers.

  • Another problem of Installation of Service Pack 1 of Windows Vista - will not install

    Hey guys, a greeting from Belgium in my first post.

    I recently reinstalled my Windows; This is a Home XP and a Vista Edition Home Premium (updated, so I need to install XP first).
    When I got it setup XP, which goes perfectly to SP3, I switched to Vista. All the small updates installed outside for a few "failures" caused by Vista stop updates itself, because they were not absolutely necessary.

    When SP1 popped up, I decided to download both and see other things, but when you try to install through Windows Update I get the error message "this update cannot continue while some services are still in use" or so, I don't remember the exact message or code.

    When I downloaded the SP1 on the Microsoft site, it worked better and smoother then Windows Update but also to is crushed when the progress bar has been a little more than half. Yet once again, I don't know the exact code but I do not know the message: "update cannot continue because of an internal problem.

    That's what I tried:

    -Retry it 40 times
    -Try in safe mode
    -Turn off all the other third part of the programs, including Win Defender
    -Tried the system update tool
    -Keep hope

    That's what I did afterwards:

    -Save all my settings
    -Rebooted and selected the dualboot XP
    -Formatted the separate partition holding the part of the dualboot Vista
    -Reinstalled on the same partition with the recommended settings, no change

    I would like to have an answer soon, people. I would be incredibly grateful if this could be resolved. Future changes may include error codes given.

    Hello Fallycrom,

    Thank you for using the Microsoft Answers forums.  We have the exact error message and the error code to help you. I suggest you check that you don't have any unknown hardware.  Click Start (Orb), then right-click on computer and choose Properties.  Select Device Manager and see if you have devices mark or explanation.  If you do, you will need to install the drivers for this device.

    Thank you for using answers Forum. Please let us know how it works.

    Joseph
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Vista will not install Service Pack 1

    Hello, I have an Acer laptop that has Windows Vista 32-bit Basic on it.  I did a factory reset on it and started to update Windows.  It says it installs successfully in 30 seconds about, but when you do another search that Service Pack 1 is found as a update and Service pack 1.  How can I fix it?  I tried the fix it tool and still no luck.

    Hello

    Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

    It will also tell you which SP you have installed.

    Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

    Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

    Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

    Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

    Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

    This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

    http://support.Microsoft.com/kb/947366

    See you soon.

  • Windows Vista will not download or update.

    Hello, I tried to download Adobe Reader and Yahoo Messenger, but I keep getting error messages. I use Windows Vista on my laptop. I tried to download/upgrade to other programs such as MSN messenger and Itunes, but downloads fail. In addition, my windows update cannot check the updates. I don't know if the two is linked, but can someone help me please. Thank you in advance.

    Hello

    You we never provided these error messages to help you properly.

    Malware will stop access you Windows Update and cause other problems.

    Scan of Malware in Safe Mode with network.

    http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    Once in Safe Mode with network, download and run RKill.

    RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

    http://www.bleepingcomputer.com/download/rkill/

    Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

    http://www.Malwarebytes.org/products/malwarebytes_free

    See you soon.

  • Windows Vista will not install device driver for Palm Centro

    My PC Windows Vista can't find info from device driver to install my new Palm Centro.  I downloaded the latest version of the Palm software.  Any ideas?  Thank you!

    What version of Vista you have?  32-bit or 64-bit?

    64-bit cannot sync via a cable - only via a wireless (BlueTooth or IR) method.

    Wyrenut


    Message relates to: Centro (AT & T)

  • Windows Vista will not install a program without wanting a disc.

    I try to install a program on my laptop windows says to insert a disc that comes with it, but not everything has a disc so I say search online and it does not find anything. the only things I have problems with things like my Ipod, my external hard drive and my mouse, please help.

    For the iPod, you must download and install the iTunes software.  For other devices, you will need to find and download the drivers from the manufacturer - if the keyboard and mouse came from Logitech for example, download the drivers from Logitech.

    writing in the new message: * e-mail address is removed from the privacy... *

    I try to install a program on my laptop windows says to insert a disc that comes with it, but not everything has a disc so I say search online and it does not find anything. the only things I have problems with things like my Ipod, my external hard drive and my mouse, please help.

  • Windows Vista will not install the usb driver for kobo reader

    I am trying to configure my reader Kobo following the indications, the PC does not allow me to install a USB driver for download, I tried many times

    but it keeps blocking.

    When you connect the device Kobo try to choose 'Manage the library', so the camera gets identified:

    http://kobo.intelliresponse.com/index.jsp?requestType=NormalRequest&id=1438&source=5&question=Do%20I%20Keep%20Reading%20or%20Manage%20Library?

  • Windows Vista will not see Seagate 320 internal drive to format

    I bought a 320GB Seagate (7200 RPM) opportunity and I'm trying to install Vista on it. The computer BIOS sees the drive, but loading Vista it does not show the HD as an external drive and ask drivers for it. The disk has been previously formatted for Mac.

    Try to use SeaTools for Windows.  See also: Seagate Installation Assistance

    Please note that the hard drive needs to be internally mounted inside the computer because Windows Vista will not install on an external hard drive.

  • Windows Vista will be preform no updates anyone can help, thank you

    Windows Vista will be preform no updates anyone can help, thank you

    Hello

    1. what happens when you try to run Windows Update? You get an error message? If Yes, what is the exact full error message?

    2. you have made no changes to the computer before the broadcast took place?

    3. is the specific question of an update?

    Method 1:

    Run Windows Update Reset (aggressive mode):

    http://support.Microsoft.com/kb/971058

    Now, restart the computer and check the update.

    Method 2:

    Run an analysis of auditor of system files on your computer and check for the issue.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 3:

    Download the update system analysis tool version of operating system and control accordingly.

    http://support.Microsoft.com/kb/947821

    How to check the updates failed:

    If you access windows update by clicking the Start button to in address bar type windows update and click on enter, click on updates of the review, and it will show you what that is either installed or not updated.

    If the problem remains even in collect and send the Windows Update log.

     

    Follow the below article to collect the log file:

     

    http://support.Microsoft.com/kb/902093

    Use SkyDrive download collected files and post screen/image capture

    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65/

    Hope the above information is helpful.

  • Upgrade of hardware and now Windows vista will not be loaded. Stop 0x0000007B error.

    Can someone help me please.  I have improved my my CPU, motherboard, RAM and power supply and now Windows vista will not load I get a Stop error 0x0000007b.  I tried the two loading normally and safe mode and I get the same thing.

    Can someone help me please.  I have improved my my CPU, motherboard, RAM and power supply and now Windows vista will not load I get a Stop error 0x0000007b.  I tried the two loading normally and safe mode and I get the same thing.

    Hey Brian39

    If you change the motherboard that you normally have to reinstall vista

    your hard drive if you ever reinstalled vista contains the drivers for the old motherboard etc.

    and if vista is pre-installed you can not put the motherboard unless you do so in collaboration with the computer manufacturer

    If a retail license, you can change the motherboard

    but you will normally always reinstall vista for reasons

    Walter, the time zone traveller

  • Windows Vista will not accept my passowrd even if I put the password in. What should I do? I can't get into what it is.

    Windows Vista will not accept my passowrd even if I put the password in. What should I do? I can't get into what it is.

    Hello

    This article describes how to use the system restore feature to log on Windows 7 or Windows Vista when you lose access to an account.

    http://support.Microsoft.com/kb/940765

    If the above does not work

    I'm sorry, but we cannot help with forgotten passwords

    It is a policy of microsoft in these forums

    you need to reinstall vista

    http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  • Windows Vista will not download

    Help. My HP G50 will start but the Windows Vista will not download. I pressed the keys F 10 and 11 F. The memory is good. I backed up my files using the F 11 Save function. I tried to go back to an earlier date using System Restore, no results. Can reset the computer by default, there is work in the F 11 key and then recover my files. Do I need a recovery disk?

    Thanks for the reply. I made the. Backup of files Wizard. At the end she asks 'Please insert the USB key' - I suppose to download files on an external drive. Well I bought an external drive and connect it to the USB port, nothing happens. He said only: "no available drive. What should I do now. I did all the steps, according to HP said on their site of troubleshooting online and this is the last step. I will not buy an HP again. A friend recommends a Sony.

  • Windows Vista drivers not install ALL or update of new pilots

    About two weeks ago, I had a problem with my computer marketing and don't not loading Windows. He gave me the option to start Windows normally or repair of launch Windows. I tried to run normally and windows still only would be not loaded correctly, so the next time the computer is started, I launched the Windows repair instead.

    Later, I tried to save my Blackberry smartphone on my Blackberry Desktop Software program (which has been on my computer since I bought it 01/05/2009. But it does not recognize the hardware. So I plugged back it it and it began to automatically search for the driver (Driver Installation Program). It says install software device driver and he's looking for preconfigured driver folders. Of waiting for the user to input and gives me the choice: 1) locate and install driver software (recommended) (2) Ask me 3 again later.) Do not show this message for this device.  I choose option 1 and it gives a message, DEVICE DRIVER installation of MICROSOFT WINDOWS SOFTWARE and I support on continue. It gives the message: SEARCHING WINDOWS UPDATE, WINDOWS UPDATE DOWNLOADING, INSTALLING the DRIVER SOFTWARE. Then a message saying: Windows encountered a problem installing the software driver for your device. Windows found driver software for your device, but it has encountered an error trying to install it. He also says: the process cannot access the file because it is being used by another process.

    Now, I didn't know what was wrong, so I tried to ask for help with material assistance and Paretologic PC Health Advisor and they are quite a few outdated drivers and asked if I wanted that they find new updated drivers, I agree.  And he again... the SAME EXACT PROCESS I HAVE INDICATED above. It will not install the drivers again and it will not install updates for all drivers more.

    So now when I go into the DEVICE MANAGER there are several yellow exclamation points next to the items (I've NEVER seen before). I can't update these drivers:

    1.) NVIDIA nForce 5/6/7 set of pilots in series, which includes NVIDIA nForce PCI System Management and NVIDIA nForce System Management Controller

    2. display drivers) laptop NVIDIA including NVIDIA GeForce 8200 M G

    3.) Atheros AR5007 802. 11 b/g WiFi adapt

    Realtek USB 2.0 card reader 4)

    Also, in OTHER DEVICES under Device Manager, there are unknown devices that have yellow exclamation points by them as well. Apparently I'm missing these devices now, and I have right clicked on it and select Update driver software. RESEARCH then AUTOMATICALLY update DRIVER SOFTWARE. She is looking for some time, and he said ENCOUNTERS A PROBLEM INSTALL THE DRIVER for YOUR WINDOWS DEVICE

    HP DRIVER MIRROR RC

    The system cannot find the specified file.

    (This was NEVER a problem before)

    Now, whenever I turn on my computer, it does an automatic search of an unknown device.

    Here are all THE drivers I've tried to update via WINDOWS UPDATE INSTALLATION. I tried to install them manually, by going to my DEVICE MANAGER and still nothing.

    About two weeks ago, I had a problem with my computer marketing and don't not loading Windows. He gave me the option to start Windows normally or repair of launch Windows. I tried to run normally and windows still only would be not loaded correctly, so the next time the computer is started, I launched the Windows repair instead.

    Later, I tried to save my Blackberry smartphone on my Blackberry Desktop Software program (which has been on my computer since I bought it 01/05/2009. But it does not recognize the hardware. So I plugged back it it and it began to automatically search for the driver (Driver Installation Program). It says install software device driver and he's looking for preconfigured driver folders. Of waiting for the user to input and gives me the choice: 1) locate and install driver software (recommended) (2) Ask me 3 again later.) Do not show this message for this device. I choose option 1 and it gives a message, DEVICE DRIVER installation of MICROSOFT WINDOWS SOFTWARE and I support on continue. It gives the message: SEARCHING WINDOWS UPDATE, WINDOWS UPDATE DOWNLOADING, INSTALLING the DRIVER SOFTWARE. Then a message saying: Windows encountered a problem installing the software driver for your device. Windows found driver software for your device, but it has encountered an error trying to install it. He also says: the process cannot access the file because it is being used by another process.

    Now, I didn't know what was wrong, so I tried to ask for help with material assistance and Paretologic PC Health Advisor and they are quite a few outdated drivers and asked if I wanted that they find new updated drivers, I agree.  And he again... the SAME EXACT PROCESS I HAVE INDICATED above. It will not install the drivers again and it will not install updates for all drivers more.

    So now when I go into the DEVICE MANAGER there are several yellow exclamation points next to the items (I've NEVER seen before). I can't update these drivers:

    1.) NVIDIA nForce 5/6/7 set of pilots in series, which includes NVIDIA nForce PCI System Management and NVIDIA nForce System Management Controller

    2. display drivers) laptop NVIDIA including NVIDIA GeForce 8200 M G

    3.) Atheros AR5007 802. 11 b/g WiFi adapt

    Realtek USB 2.0 card reader 4)

    Also, in OTHER DEVICES under Device Manager, there are unknown devices that have yellow exclamation points by them as well. Apparently I'm missing these devices now, and I have right clicked on it and select Update driver software. RESEARCH then AUTOMATICALLY update DRIVER SOFTWARE. She is looking for some time, and he said ENCOUNTERS A PROBLEM INSTALL THE DRIVER for YOUR WINDOWS DEVICE

    HP DRIVER MIRROR RC

    The system cannot find the specified file.

    (This was NEVER a problem before)

    Now, whenever I turn on my computer, it does an automatic search of an unknown device.

    Here are all THE drivers I've tried to update via WINDOWS UPDATE INSTALLATION. I tried to install them manually, by going to my DEVICE MANAGER and still nothing.

    Hey Renee27j

    you are looking for and install 3rd party hardware dirvers from the site of hardware manufacturers not through windows update

    Walter, the time zone traveller

Maybe you are looking for

  • How can I remove an application at the bottom of my screen to open applications?

    When I double click the home button to bring up the screen to open apps, there is always a bar Amazon Video below that says something like "Hello, Lucy." The app is certainly not open, so I see no reason to make it on the screen of the open applicati

  • WEIRD file extensions from the browser does not open

    Shell script for save on my local website and they have *.sh *.ksh extensions. When I try to view the contents of these files from Firefox it will 'stop in the weeds' open a new tab for each line [I think] in the file. I can rename all files have a *

  • project link error - undefined symbol 'Random@16 '?

    Hello I get an error of link project - Undefined symbol '[email protected]' referenced in 'main.c '. There is no reference to where the error occurs, someone at - it a trick? Thank you!

  • PROBLEMS AFTER UPDATE DOWNLOAD

    I downloaded the microsoft updates and after the closing down and restart computer download I received a message that says: updates not configured correctly coming changesDo not stop your computer. then it restarts continuously and again with the sam

  • Connect the VCR to XPS 8300.

    How can I connect an old VCR to my Dell XPS 8300.  Girl has some old tapes and I need to transfer them to my hard drive...?