Windows Vista will not start up - keep getting the black screen

I read through the questions answered similar questions and still can not past the black screen with windows vista.  It's on a dell inspiron 1525.  Also, it does not start in safe mode and I tried booting from the last good configuration and is still stuck on the black screen.  This just started a few days ago, and the computer was working fine until this date.  Can you help me?

Hi Jimazona,
 
1. from when are you facing this problem?
2. any change in software or new hardware on your computer?
  
Method 1:
  
First of all I suggest you to disconnect all devices external one except keyboard and mouse and try to start your computer and check.
     
Method 2:
    
I also suggest you perform a startup repair and check if this solves the problem.
   
Follow the steps below:
   
a. Please insert the Windows Vista DVD and restart the computer.
b. when we are asked to press a key to boot from the DVD, please press enter or the SPACEBAR.
c. Select your language settings, and then click Next.
d. click on repair your computer.
e. Select the operating system you want to repair, and then click Next.
f. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.
 
Access the link below for more information on the Startup Repair:
 
I would like hearing that the results back on your part about what happened after trying each method.

Thank you, and in what concerns:
I. Suuresh Kumar - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think. 

Tags: Windows

Similar Questions

  • Satellite L30-101 - Vista will not start all I get a black screen

    Hey can any help me please I have a toshiba satellite l30-101 (PSL33E) with windows vista basic hoe

    I was updating my BIOS on toshiba website and while he was installing the battery has been disconnected and when I turned on my computer laptop back I got was a black screen, the fans would start and thecd rom would turn

    Ive triyed al the keys F and all the FN keys to bu that nothing would happen that also, I tried an external monitor and the same thing I got nothing on the monitor is a black screen then when I disconnected the mnitor a blue box would come on the screen saying no video input please attatch cable

    allsoo ive tried running the recovery disc, I put the cd in the CD-ROM drive would begins to spin, but nothing would happen that I tried all the F keys while the disc was running, but still nothing would happen

    could sumone if you please help me

    Post edited by: garethg83

    > I was updating my BIOS on toshiba website and while he was installing the battery has been disconnected and when I turned on my computer laptop back I got was a black screen, the fans would start and thecd rom would turn

    I m afraid the BIOS update has no procedure and therefore the ROM chip has not updated as it should. This is the reason why the laptop can not start correctly.

    I think that it of necessary to reflash the ROM BIOS module Once again, but this can be done only using a procedure of BIOS of crisis.
    As far as I know this can be done only through ASP because there is no traditional BIOS version by download.

  • Windows will not start I just get a black screen

    I have a Dell Inspiron 1520.  When turning on the computer the dell logo comes back, but windows never starts the screen just goes black.  I tried the repair of advanced boot option but I don't get the second screen described on the web site of Dell tech support, the screen goes black again.  Any ideas?

    Hello

    You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
    -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
    then right click on the device and UNINSTALL - REBOOT.

    Another method to try to get to the desktop (try in normal Windows Mode without failure)
    is CTRL + ALT + DEL and the processes tab find EXPLORER.exe and END PROCESS on it.
    then on the tab Applications - lower right - new task - the type in EXPLORER.exe. Safe mode is
    accessible by tapping F8 as you start several times.

    First check this thread in case it is simple and if not to come back to this thread.

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

    Black screen problems are extremely difficult to repair and all hotfix is usually a hit or miss
    base. That there is no information on a black screen as there is just a blue screen
    adds to the difficulty. Often using a restore point or Startup Repair will have no effect.
    You can try a google to see the proposed repairs, whom some have worked however these
    cover a wide field of efforts.

    Here's a video of one of them.

    http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

    Here's another fix
    http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

    You have a Vista disk? You can try restoring the system to it. If you do not have the
    discs, your system manufacturer will sell them at low prices. Or try in safe mode if you can get
    it.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can create a recovery disc or use someone even version (to do the system restore
    It only needs to be bootable).

    How to create a Vista recovery disk
    http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

    ------------------------------------------------

    These require the correct Vista discs since you can not start safe mode.

    Try the Startup Repair tool-

    This tells you how to access the System Recovery Options and/or with a Vista disk
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    -----------------------------------------------

    Here are a few Google searches where many have found different solutions:

    Vista black screen - check that a 1st
    http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

    Vista black screen Solution
    http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

    Vista black screen Fix
    http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

    -----------------------------------------------

    If necessary and you can access all ordinary Windows.

    You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
    (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
    3.

    You can use another DVD that aren't copy protected but you you need to own
    Product key.

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    If nothing works, you can do a repair installation that needs to save the data, but you will
    to reinstall the programs. This also requires correct Vista disks especially for OEM versions.
    You will need to know your product Code.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    How to perform a repair for Vista Installation
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    ---------------------------------------------------------------------------

    Another method that works sometimes: at the command prompt, type of Vista startup disk:
    (type in a single line or copy / paste a line at a time and then press enter - do not type)
    parenthesis or "BOLD"
    )

    c:

    cd\

    CD c:\Windows\System32\winevt (there is a space between cd and C :)

    Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

    RESTART Windows

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Windows Vista will not start and cannot recover

    I have a desktop PC HP Compaq Presario, which has about 2 years. The problem started when Windows Vista was not able to start. It would load up on the "COMPAQ" screen and then it would just go to a slider black white screen with a flashing white light on the top left. Now that I've seen a lot of discussions with this similar problem, but it seems that people would rather not reformat in order to lose any important data. But in my situation, I have some important data on my computer so reformatting would be fine, except...

    -Recovery system won't work. I insert the 1 system recovery disk, all files loading correctly, it allows me to choose if I want to reset the computer to factory settings, I click Yes and it finishes the reformatting step. But then the problem comes when I insert disc 2, original content relocation step. It fills up to 10-16% and then I get a blue screen of death STOP: 0 x 00008086. I tried SEVERAL times and the same thing happens.

    -The next thing I tried to do is to fix the computer via a copy burned Windows Startup Repair. Loads everything up, I spent the page where I choose my language, currency, etc. The problem comes when I get to the System Recovery Options. There is no listed BONES and a box appears and says "Searching for Windows installations", and then it stalls just on this pop up. This problem is quite recent, because before there is no pop up and there is simply no OS listed, so I still could not repair or restore in any case.

    -Before, when I was able to go into the advanced options on the Startup Repair disk (when he was not of "searching for Windows installations" pop up to stall on), I'd go to the command prompt in attempt to chkdsk/r C:. All bad sectors or groups or something else would be fixed, and then he would hold to step 5 of 5 when checking free space.

    -In addition, I tried to make a diagnosis of memory via the Startup Repair tool. That's what I get:

    File: \boot\memtest.exe

    Status: 0xc000000f

    Info: The selected entry could not be loaded because the application is missing or corrupt


    Furthermore, I cleaned my computer, it is now almost completely free of dust. In addition, I can't get into the BIOS, I can't get into safe mode, and now I can't have in the command line

    Hello

    If you are unable to enter the BIOS and all the other problems, you have hardware problems
    and need the help of a real store of the computer (no leeks and glances at a Best Buy or any other
    Department stores) or Support of HP/Compaq.

    Compaq Presario Support
    http://www.Compaq.com/country/cpq_support.html

    Forums for HP/Compaq
    http://h30434.www3.HP.com/PSG/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Windows Vista will not start or repair.

    Greetings!

    I'm having a problem with my computer. About 2 weeks, my Windows Vista out of nowhere began to fail in the market with the infamous and hated "cannot start Windows, a recent hardware or software may have... "and the options of start that none who work. I tried to fix it several times, but Windows would only start for an hour or two, and then the screen would go black. When I tried to start up, he would go back to the Windows cannot start message. I then completely reinstall windows, but every time I try the black screen comes back and the windows do not message starts again. I then tried to boot from an Ubuntu disc and install it, in vain the same black screen and message windows after that reload will appear. Now, the computer will only start with the windows form has failed every other power-up, otherwise the black screen appears. I looked inside my computer and everything is plugged tight, and I just checked my drive for errors of law before the failure, so I don't know what could be the cause of this.

    Help, please!

    Thank you very much!

    Brandon

    Hi noblesb,

    First disconnect the external devices connected to the computer except the mouse and keyboard.

    I suggest that you try the startup repair using the windows vista installation disc.

    1. Insert the installation disc.
    2. restart your computer.
    3. click on the Start button, click the arrow next to the lock button, and then click restart.
    4. If you are prompted, press any key to start Windows from the installation disc.
    Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
    5. choose your language settings, and then click Next.
    6. click on repair your computer.
    7. Select the operating system you want to repair, and then click Next.
    8. in the System Recovery Options menu, click Startup Repair.
     
    Check out the link for more information below.
    http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

    If the previous step fails then check if the computer is able to boot into the advanced boot options.

    Steps to start in safe mode

    1 restart your computer if it is running.
    2. tap on the F8 key after your initially on powers computer.
    3. Once you see the menu Advanced Boot Options, you can stop tapping.
    4. use the up/down arrows to select your selection.
    5. Select Safe Mode and press enter.
    6. you should see loading drivers and wait please.
    7. you should then be on the Welcome screen.
    8. connect to your computer using an account with administrator privileges.

    If you are unable to boot into safe mode, then try any other fashion among early startup options, check out the link for more information below.

    Startup options (including safe mode)
    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

    I hope this helps!

    Halima S - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Vista no longer starts after re-installation (cursor black screen, white after installation)

    A few days ago I decided that I wanted to start my Dell Inspiron 1720, back to square one. I knew that there are a few options, so I tried to restore. I realized it let me only a month back in time and my computer was slow for about a year now. I looked through my manual that came with my laptop and decided to unstack reinstall drive in and all re - install Windows Vista. I realized after I put the disk in and from the installation, I forgot to disable my anti-virus (trend pro microphone). I don't know if this is causing the problem, but after the installation, I get a black screen with a white cursor. I let it sit for about 4 hours before I decided to restart my laptop. Once I rebooted, it wouldn't let me normally, start in safe mode, or start from the last successful boot. I then tried to fix with my Vista DVD and who do not have too much work. I also tried the restore and it tells me that I am running in a low state of diagnosis and it cannot be done. I tried to reinstall vista twice since then and I'm out of ideas. Help, please! I forgot to add, when I try to start in safe mode, it stops at the ckcdisk.sys (I think it's called).

    millsx89,

    When you install Windows Vista on the 1720 Insp, you need to install the SATA drivers during installation. That's why your system stops at this point. You can also boot into the bios by pressing F2 and changing the Sata in ATA instead of AHCI operation. And then install windows. You will need to change it back once you have installed windows and loaded the drivers.

    Thank you

    Jesse

  • Computer now put in hibernation, Vista will not boot. Computer stuck on black screen after startup. Help?

    I put my computer on 'Hibernate' when I went to bed. When I woke up, I started the computer learned to manufacturer (HP) computer screen introduction as usual, but windows doesn't not load afterwards, as he usually does: I just get a black screen. Lights supply and all the rest are on. Just nothing happens. Any ideas?

    Can I use the firmware from HP (I guess that's what it is) to confirm that my memory and hard drive are very good. I tried Googling the problem, and some signs indicate a problem with the powercfg parameter. I can't get in cmd.exe to reset because I can't get into windows (although through HP firmware, I can enter in "Administrator: X:\windows\system32\cmd.exe - cmd", which seems the same, but the orders that I see offered on websites do not seem to work - help?). Ditto with Safe Mode. I don't have Vista installation disc.

    Any help is very appreciated.

    Hello

    You need to contact HP and install recovery disks command to perform a repair.

    http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us

  • Installed Windows 7 on my netbook but keep getting the blue screen while surfing Web sites

    Hello!

    First of all, this is my first post time on these forums, I often read them and think they are great!

    Now on to my question, I recently installed Windows 7 on my LG x 110 netbook. I ran the windows Upgrade Advisor 7 and confirmed that my netbook managed to all the minimum requirements for a 32-bit install. After installing Windows 7 my pc works perfectly (better than XP in fact) has installed all of the drivers needed to run automatically unless the driver for my microphone and my 3gs integrated internet which I managed to resolve. The only problem I have is sometimes while surfing the web, I get the blue screen of death and my netbook restarts. I was not able to understand by myself am so regarding this forum hoping to repair... I contacted LG for information on downloading upgraded drivers, but got a response from them saying that my pc is not supported with drivers for windows 7. Here is some information from the Center problem with Windows 7, I don't know if it's necessary info, please tell me where to find the correct information and how to access it.

    Problemsignatur

    Information additional om problemet

    BCCode: c2

    BCP1: 00000007

    BCP2: 00001097

    BCP3: 8078AE94

    BCP4: 8078AE74

    OS version: 6_1_7600

    Service Pack: 0_0

    Product: 256_1

    Bucket ID: 0xc2_7_RTL8187Se! PlatformFreeMemory + 1 b

    ServerInformation: 47840a85-d17f-4bd7-8fa5-f385071573a0

    Any help is greatly appreciated as I really want to re - install Windows XP because Windows 7 runs so well, even on a low technical specifications.

    Handelsenamn: BlueScreen

    OS version: 6.1.7600.2.0.0.256.48

    Sprakvariant-ID: 1053

    It seems that you have a C2 Bad Pool Caller error, which is difficult to analyze without the minidump file.  If you googled around and find WinDBG, you can open the minidump file.

    Look for the line: nom_image: it will tell you exactly what file has caused the error.  If all goes well, once you find exactly what caused the error, you can search for updated drivers/software.  At first glance, I would say it was the Realtek drivers because you see the line RTL8187Se in your info.

    My MSI Wind U100 netbook works also Win7 perfectly.  Double boots with MacOSX too, just because I wanted to see if I could do it.  I change the hard drive (for a bigger) and added the RAM.  Nothing low spec thereon compared to what was needed for WinXP when it came out!

    Try this driver, it should do the trick.  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PFID=40&level=5&Conn=4&ProdID=172&DownTypeID=3&GETDOWN=false&downloads=true

    And since this is the NETWORK/connection wireless card driver, he explains why the errors come during surfing!

  • Free games included with Windows Vista will not start.

    I tried to start one of the games for free in Windows Vista (Chess Titans, FreeCell, hearts, Mahjong Titans, Solitaire etc.) but I get an error measage: "this file has no program associated with it for performing this action.  Create an association in the Set Associaction Control Panel". {Error code: C:\User\Name\AppData\Local\Microsoft\Windows\GamesExplorer\{00D8862B-6453-4957-A...}.
    These games, used to work until I have connected on the Microsoft web site and search for updates.

    I went to control panel default programs - programs - '-' associate a file or protocol type with a program, without success.

    Can anyone help or give advice as to re-download these games?

    Hi PaulO246,

    Thank you for directing your question on the forums of answers.microsoft.com.

    Is it only the games that are carried out at this stage, PaulO246?  Are there other programs or files that are not associated with?  Have you seen errors referring to a failed installation of the update or mistakes that can be reported on this subject?

    To review the event viewer to obtain this information, please see the following article.

    http://windowshelp.Microsoft.com/Windows/en-us/help/a99f69c1-935f-4116-ba5f-33d8800ef9da1033.mspx

    If you would like to connect the error codes, such as 800b0100 or 8007371 b Please post these errors as well as any verbiage on the observer error events lists in newspapers of the forum.

    We will try to verify this information when it is available.

    If you don't want to take that step right now:

    A way to solve this, if you have a good restore point, you can go back to it and then starts with the download updates manually one by one with control over games between each install to confirm that update was the cause.

    To perform a restore system;

    Please make sure that you have all the important information saved before trying to do a system restore.
    1. click on start
    2. in the search box just above start System Restore type (you don't have to hit enter to get this to appear)
    3. in the list above system restore search box must be the top of the page, click on system restore
    4. This should appear an assistant of system restore, it will walk through the steps on how to do a system restore to the last known better.

    Please let us know in the forum about how the status of this issue or any other necessary assistance.

    Kind regards

    Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think.

  • Windows vista will not start or start in any mode

    My windows vista 32 bit operating system does not start. I tried it in all security modes and last configuration. I also tried to start with an installation disk, but the disk does not start for me to fix it. It is said that windows could not start because of a hardware error and suggested that I leave my installation disc, but nothing happens. It just keeps going back to safe mode options. How can I fix start upward.

    Wat is the specific model of the system?

    Yes, many of the items in the list may not be part of your specific system - but if your system has wireless has bluetooth or has a smart card reader, etc. - it's order.  It has a chipset motherboard, audio, video, etc..  You just skip installation of items that you do not have by following the list.

  • Windows Vista will not start after the automatic installation of the patch Ms.

    My Dell laptop does an automatic installation of the latest MS patches (12/08/10) and now he can't boot into windows.  All tests show that the material is fine, but an error at the end of the "bad update patch" said test results I can not even to go back to a previous restore point.  This happened to me the year last on my desk... same thing, but it's XP which could not start after an automatic update for the Member States.  Dell technical support told me that MS knows what is happening, but it is not supposed to be public knowledge.  I need to know if there is a fix, in addition to erase everything and do a complete reinstallation of the operating system.

    Follow these steps to try to solve your problems of boot.

     

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    http://www.windowsvistauserguide.com/system_restore.htm

    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows vista will not start and is suspended on microsoft today updated. Stops on step 3 update

    Microsoft updated automatically to my vista computer today and now it does not work! It gets stuck on reboot and says "configuration updates step 3 do not turn off your computer" then hangs at 0% for a minute and recycles stuck in the same place again. Help!

    Hello

    Method:

    Follow the link below, perform the steps and check if it helps.

    An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

    http://support.Microsoft.com/kb/949358

    Let us know if it helps.

  • Windows Vista will not start just goes to windows error recovery

    I have owned my computer a year and a half and had a lot of problems with it. I had 3 replaced hards and a motherboard.  my computer is turned off, then back on error windows approached and evry time I click an option, the computer shuts down then restarts his return to windows error recovery. I tried to put the recovery disk in, but it does nothing I also tried windows made it sit and tried the disk that is supposed to find the r but nothing will work. all of the suggestions.


    Recovery mode f11 does not work as well

    even in f8 f10 if I push the options it just stops and returns to the menu of this same

    I think that it is high time they gave you another to replace this one!

    You had such a race of bad luck, it would be more advantageous for them replace then keep "fixing" for you.

    Good luck with them and thank you for the reply.

    See you soon. Mick Murphy - Microsoft partner

  • Windows 7 will not start, only to get bluescreen

    Hello I have a problem

    I have Windows 7 64 bit

    For a game that I had to change my processor to a limit so that the game have graphic problems, I changed and restarted my computer after I had to options if I chose the option to start windows normally it loads for a while as always the blue screen of death apears and my computer restarts if I chose leaves windows problems. He is trying to fix them but without success and my computer restarts again.

    I think the problem is that my computer now has not enough memory RAM at startup because he needs 2 GB. I thought I could start it in safe mode, but I don't know how to do it. BIOS doesn't help much.

    Anyone know a soloution?

    Hello

    > I thought I could start it in safe mode, but I don't know how to do
    You can start Windows in safe mode if you press the F8 key before Windows starts. Then, you see the Windows Advanced Boot menu and select Safe mode.

    By the way: what laptop you have and that you use the version preinstalled Windows from Toshiba?

  • Windows Vista is not starting right after installing the game on Steam

    I had problems with my computer... I recently got a game on Steam, my computer asked me to allow a program. When I welcomed this program it restarted my computer. Now I can't open files or anything either, but Google Chrome works, steam is running. I'm puzzled about what is going on. I don't know if it's a virus or something much worse. Since I welcomed this program I have not been able to start my computer correctly, I have done analyses and a recovery disk to start problems.

    Problem event name: Startup repairV2

    Signature of the problem 01: AutoFailure

    Prob Sig 02: 6.0.6001.18000.6.0.6001.18000

    Prob Sig 03:6


    Prob GIS 04:786444

    Prob Sig 05: Corruptvolume

    Prob Sig 06: NoRootCause

    Prob GIS 07:0

    Prob GIS 08:2

    Prob Sig 09: WrpRepair

    Prob GIS 10:87

    OS version: 6.0.6001.2.1.0.256.1
    Local ID: D

    If any of you have any solution please reply or send me an email. Thank you very much.
    -Brian Evnas

    Hello

    try a restore of the system before this happened

    http://www.windowsvistauserguide.com/system_restore.htm

    If necessary do in safe mode

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

Maybe you are looking for

  • uptight Server 5.1 installation to update wiki service

    I'm trying to update OS X Server version 5.1 on El Capitan. The update has been blocked to "Update the Wiki Service" for more than 6 hours. There is a warning on the cancellation of update if I try to shut down the server. The update went smooth on 2

  • Invite you to download IE8

    IE8 came installed on my computer Hp (Windows Vista Home Premium). However, since several days I get popup guests to download IE8 I already installed on my computer. How can I stop these guests to enter? These guests come once a day at the same time.

  • Error 0 x 80240036 when you try to update Internet Explorer

    Original title: error code 0 x 80240036 I get the error code 0 x 80240036 when you try to update to internet explore after that computer crashed

  • With movie maker convert a frame to a photo?

    Hello I want to take a picture of filmmaker and make a photo?  Can copy some images in "Windows Live Photo Gallery", I don't and then convert it to a jpeg file or similar. Any advice? I downloaded a file 5 sec on YouTube last week just to get picture

  • MsiExec.exe running at all times

    Seems I'm always 2 instances of msiexec.exe running at all times. So far, I ran the Windows Installer Clean up tool, enabling the service to manual start and down anti virus scans. I can disable it in the Task Manager, but as soon as I restart, they