Windows Vista will not synchronize with internet time server

I am running Windows Vista Business SP2 and Norton Internet Security on a Lenovo T61.  All updates for Windows, Norton and Lenovo have been applied.  When I try to synchronize with a time server Internet, I get the error message ' year error occurred while synchronizing with time.windows.com "I tried each of the other servers listed time and still get the same error message.  I spent reviewing the configuration of the firewall in time of Norton Internet Security and S32 and port 123 are enabled.  I tried to synchronize with the two Norton Internet Security Firewall on and outside, with the same results. I have internet google and looked for a solution of Microsoft.  After reading all the posts relating, I tried the following:

running administrative invite

net stop w32time

w32tm /unregister

w32rm /register

net start w32time

Each performed positively.

This has not solved the problem.  I then ran:

w32tm/config /update

This is performed in a positive way.

This has not solved the problem. I then ran:

w32tm/Resync /rediscover

He responded with "the computer did not resync because no time data was available"

I then ran:

w32tm/query/status

He responded with "last successful synchronization time: not specified.

The local Group Policy Editor reads for providers of Service/Computer Configuration/Windows Administrative Templates/time/system time

Configure Windows NTP Client not configured

Enable Windows NTP Client not configured

Enable Windows NTP server not configured

In summary, it seems that my computer has never synchronized with an Internet server time.

If you need additional information, please provide specific instructions on how to get it and I will provide.

From time to time, I checked to see if I resync of internet time.

Out of the Blues started windows resynchronize.

The only change I can think is that AT & T reset head of communications AT & T defaults shortly before he started work.  This tends to confirm my opinion that it was a problem of communication.

PROBLEM SOLVED!

Tags: Windows

Similar Questions

  • Windows 7 will not synchronize with internet time server

    Windows 7 will not synchronize with internet time server

    Had to go to services.msc and allow the windows time server to access the computer. Go to run and type services.msc hit enter, do scroll down to windows time server and more he probably stopped, just restart. Thanks to you all

  • Date and time do not synchronize with internet time server

    I continue to adjust the date and time of my laptop. but after an hour, the time is wrong once again. It was late, and sometimes the time and date back to yesterday's date.

    Hello

    ·          What version of the operating system is running on your computer?

    ·          When the issue started?

    ·          It's a laptop or a desktop computer?

    You can read the following article:

    Windows XP: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/windows_date_it_overview.mspx?mfr=true

    Windows Vista: http://windows.microsoft.com/en-US/windows-vista/Set-the-clock

    Windows 7: http://windows.microsoft.com/en-US/windows7/Set-the-clock

  • Microsoft Windows 7 is not syncronozing with the time server, what can I do about it?

    Windows does not synchronize with the time server. For me, it says that there is no previous time being synchronized on the record, but I don't see why it should not be synchronized at all!

    Have you tried one of the alternative servers?

  • Upgrade of hardware and now Windows vista will not be loaded. Stop 0x0000007B error.

    Can someone help me please.  I have improved my my CPU, motherboard, RAM and power supply and now Windows vista will not load I get a Stop error 0x0000007b.  I tried the two loading normally and safe mode and I get the same thing.

    Can someone help me please.  I have improved my my CPU, motherboard, RAM and power supply and now Windows vista will not load I get a Stop error 0x0000007b.  I tried the two loading normally and safe mode and I get the same thing.

    Hey Brian39

    If you change the motherboard that you normally have to reinstall vista

    your hard drive if you ever reinstalled vista contains the drivers for the old motherboard etc.

    and if vista is pre-installed you can not put the motherboard unless you do so in collaboration with the computer manufacturer

    If a retail license, you can change the motherboard

    but you will normally always reinstall vista for reasons

    Walter, the time zone traveller

  • Windows Vista will not accept my passowrd even if I put the password in. What should I do? I can't get into what it is.

    Windows Vista will not accept my passowrd even if I put the password in. What should I do? I can't get into what it is.

    Hello

    This article describes how to use the system restore feature to log on Windows 7 or Windows Vista when you lose access to an account.

    http://support.Microsoft.com/kb/940765

    If the above does not work

    I'm sorry, but we cannot help with forgotten passwords

    It is a policy of microsoft in these forums

    you need to reinstall vista

    http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  • SP2 for Windows Vista will not install. Receive error 800b0100 code. Windows Update has encountered an unknown error.

    SP2 for Windows Vista will not install. Receive error 800b0100 code. I already tried all possible solutions - disabled and even uninstalled McAfee Firewall disabled, ran the CheckSUR repeatedly (see below for the final analysis), tried to install from windows update, also downloaded the stand-alone MS pack, tried selective startup and hidden States of services, still nothing. It has been 2 days work on this. Help, please!

    =================================
    Preparation of control system was updated.
    Binary version 6.0.6002.22202
    Package Version 6.0
    2009-10-24 12:36

    Checking Windows Service Packages

    Checking of manifests package and catalogs

    Checking package Watchlist

    Watchlist checking

    Checking packages
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum

    Control components store

    Summary:
    Seconds executed: 1241
    Found 4 errors
    CBS MUM lack count: 4

    Unavailable repair files:
    servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat
    servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.cat
    servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.cat
    servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat

    Hello Yiratr,

    Thank you for using the Microsoft answers Forums.

    Solution:

    Follow the steps in the web link below.

    http://support.Microsoft.com/kb/956702

    That should do the trick for you.

    Thank you.

    Kind regards

    Augustine.

    "URGO".

    UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

  • Windows Vista will not see Seagate 320 internal drive to format

    I bought a 320GB Seagate (7200 RPM) opportunity and I'm trying to install Vista on it. The computer BIOS sees the drive, but loading Vista it does not show the HD as an external drive and ask drivers for it. The disk has been previously formatted for Mac.

    Try to use SeaTools for Windows.  See also: Seagate Installation Assistance

    Please note that the hard drive needs to be internally mounted inside the computer because Windows Vista will not install on an external hard drive.

  • Windows Vista will not download

    Help. My HP G50 will start but the Windows Vista will not download. I pressed the keys F 10 and 11 F. The memory is good. I backed up my files using the F 11 Save function. I tried to go back to an earlier date using System Restore, no results. Can reset the computer by default, there is work in the F 11 key and then recover my files. Do I need a recovery disk?

    Thanks for the reply. I made the. Backup of files Wizard. At the end she asks 'Please insert the USB key' - I suppose to download files on an external drive. Well I bought an external drive and connect it to the USB port, nothing happens. He said only: "no available drive. What should I do now. I did all the steps, according to HP said on their site of troubleshooting online and this is the last step. I will not buy an HP again. A friend recommends a Sony.

  • Sierra mail does not synchronize with my Exchange Server more.

    Dear community.

    After the transition to macOS Sierra Mail is not synchronize with the Exchange Server, so I can't check my e-mail from work. I deleted and reinstalled the exchange account, which did not help with the problem.

    At the same time, my iOS (iOS 10) devices keeping synchronization without any problem.

    Someone has the same problem? Any solution?

    Thank you, David

    Works fine for me on more than one Mac running Sierra. Contact your IT Department.

  • my windows vista will not update or accept any download error code 800700cb

    my windows vista does not accept updates or tried any download error code 800700CB can someone help pls?

    Hello

    (1) what is the exact full error message?

    (2) is the specific question of an update?

    (3) remember you to make changes to the computer before the show?

    You can try the following methods and check the status of the issue.

    Method 1:

    Troubleshoot problems with installing updates.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Method 2:

    Disable your security software installed on the computer and try to install the updates.

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

    NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  • Windows Vista will not start and cannot recover

    I have a desktop PC HP Compaq Presario, which has about 2 years. The problem started when Windows Vista was not able to start. It would load up on the "COMPAQ" screen and then it would just go to a slider black white screen with a flashing white light on the top left. Now that I've seen a lot of discussions with this similar problem, but it seems that people would rather not reformat in order to lose any important data. But in my situation, I have some important data on my computer so reformatting would be fine, except...

    -Recovery system won't work. I insert the 1 system recovery disk, all files loading correctly, it allows me to choose if I want to reset the computer to factory settings, I click Yes and it finishes the reformatting step. But then the problem comes when I insert disc 2, original content relocation step. It fills up to 10-16% and then I get a blue screen of death STOP: 0 x 00008086. I tried SEVERAL times and the same thing happens.

    -The next thing I tried to do is to fix the computer via a copy burned Windows Startup Repair. Loads everything up, I spent the page where I choose my language, currency, etc. The problem comes when I get to the System Recovery Options. There is no listed BONES and a box appears and says "Searching for Windows installations", and then it stalls just on this pop up. This problem is quite recent, because before there is no pop up and there is simply no OS listed, so I still could not repair or restore in any case.

    -Before, when I was able to go into the advanced options on the Startup Repair disk (when he was not of "searching for Windows installations" pop up to stall on), I'd go to the command prompt in attempt to chkdsk/r C:. All bad sectors or groups or something else would be fixed, and then he would hold to step 5 of 5 when checking free space.

    -In addition, I tried to make a diagnosis of memory via the Startup Repair tool. That's what I get:

    File: \boot\memtest.exe

    Status: 0xc000000f

    Info: The selected entry could not be loaded because the application is missing or corrupt


    Furthermore, I cleaned my computer, it is now almost completely free of dust. In addition, I can't get into the BIOS, I can't get into safe mode, and now I can't have in the command line

    Hello

    If you are unable to enter the BIOS and all the other problems, you have hardware problems
    and need the help of a real store of the computer (no leeks and glances at a Best Buy or any other
    Department stores) or Support of HP/Compaq.

    Compaq Presario Support
    http://www.Compaq.com/country/cpq_support.html

    Forums for HP/Compaq
    http://h30434.www3.HP.com/PSG/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Free games included with Windows Vista will not start.

    I tried to start one of the games for free in Windows Vista (Chess Titans, FreeCell, hearts, Mahjong Titans, Solitaire etc.) but I get an error measage: "this file has no program associated with it for performing this action.  Create an association in the Set Associaction Control Panel". {Error code: C:\User\Name\AppData\Local\Microsoft\Windows\GamesExplorer\{00D8862B-6453-4957-A...}.
    These games, used to work until I have connected on the Microsoft web site and search for updates.

    I went to control panel default programs - programs - '-' associate a file or protocol type with a program, without success.

    Can anyone help or give advice as to re-download these games?

    Hi PaulO246,

    Thank you for directing your question on the forums of answers.microsoft.com.

    Is it only the games that are carried out at this stage, PaulO246?  Are there other programs or files that are not associated with?  Have you seen errors referring to a failed installation of the update or mistakes that can be reported on this subject?

    To review the event viewer to obtain this information, please see the following article.

    http://windowshelp.Microsoft.com/Windows/en-us/help/a99f69c1-935f-4116-ba5f-33d8800ef9da1033.mspx

    If you would like to connect the error codes, such as 800b0100 or 8007371 b Please post these errors as well as any verbiage on the observer error events lists in newspapers of the forum.

    We will try to verify this information when it is available.

    If you don't want to take that step right now:

    A way to solve this, if you have a good restore point, you can go back to it and then starts with the download updates manually one by one with control over games between each install to confirm that update was the cause.

    To perform a restore system;

    Please make sure that you have all the important information saved before trying to do a system restore.
    1. click on start
    2. in the search box just above start System Restore type (you don't have to hit enter to get this to appear)
    3. in the list above system restore search box must be the top of the page, click on system restore
    4. This should appear an assistant of system restore, it will walk through the steps on how to do a system restore to the last known better.

    Please let us know in the forum about how the status of this issue or any other necessary assistance.

    Kind regards

    Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think.

  • Windows Vista will not be updated to Service Pack 2 with the access denied 0x80070005 error

    I bought a new computer, and it came with Windows Vista Home Basic SP1. I've updated every day and a great success until this. When I tried to install after pressing accept on the license agreement screen, when it says computer preparation. I get an error indicating that the Installation has failed. I also tried some work around and find myself without success. So far, I turned my (even uninstalled), kaspersky internet security ran system update tool, disable most of the startup process, reset the permissions in my registry and created a new user with privileges to administrator, but when I access the user created recently, after the box at the top left corner that says personilizing (in the classic windows theme) need me just a blue screen error-free. But I can still access the Task Manager and its been like that since.

    And I also did an accesskchk command that noted:
    HKLM\software\Microsoft\Windows\CurrentVersion\Component Servicing\Retry Agent of base
    HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm
    HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\Package_for_KB955430~31bf3856ad364e35~x86~~6.0.1.18005
    HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\Package_for_KB955430~31bf3856ad364e35~x86~~6.0.1.18005\InstallCounter
    HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP2-KB948465~31bf3856ad364e35~x86~~6.0.0.18005
    HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP2-KB948465~31bf3856ad364e35~x86~~6.0.0.18005\InstallCounter

    is their anyway to fix this?

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Printer Dell AIO 944 installed with my laptop Compaq (Windows Vista) will not be printed.

    I had an old Compaq Office of four years who developed problems that would cost me more trouble that it's worth.  I had been printing it to a Dell 944, which I then installed in a new laptop Compaq with Windows Vista.  The installation seems to have been systematic and successful, but I can't get the Dell print.  The message I get is "Incorrect Port detected.  The current print job has been cancelled.  This printer is designed to work with USB cables only.  The current software setting is not set to USB port.  Make sure you use a USB cable (and) the printer are set to a USB port. "I followed the instructions to set the USB port, and it seems that the port is, in fact, enabled.  I know that USB cable works, because he worked with the old desktop computer.

    Hi jwfinnashville,

    According to the Dell website, this can happen if the printer drivers are not installed properly.

    On the Dell site, they suggest to install a fix to uninstall all the drivers printer completely from the computer, then restart the computer and then reinstall drivers from the Dell website and check out them.

    Download the patch here to remove all printer drivers

    See also: http://en.community.dell.com/forums/p/19251369/19406642.aspx#19406642

    Then download the printer drivers for Windows vista 32 bit from link here and check

    For additional support, post your request in the Dell forums.
    http://en.community.Dell.com/

    I hope this helps!

    Halima S - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for