Windows Vista won't load disc

Windows Vista 64 bit frozen and would not.  After reading the book has decided that I should restore disk factory.  Press F12 by following the instructions (I did all the retore point Jules Destrooper, no go).  After hitting F12 it says press F1, set thinking it would reformat the disk drive.  Instead it loaded Vista and it works.  Now, whenever I start the computer it shows the line F1 and I have to insert the disc to load.  What happened.

Hello

·         Which version of Windows Vista you are using?

·         What is the brand and model of the computer?

Regarding the recovery DVDs that you get F1 option before you start, you can try to contact your OEM (manufacturer, i.e.) for assistance.

I hope this helps.

Tags: Windows

Similar Questions

  • Windows Vista won't load on my computer

    My Windows Vista computer does not load upwards after I log in.  As soon as I connect you I get an error message: "Windows Explorer has stopped working" followed by "Restart Windows" and then it never restarts.  I soon begin to receive error message that State that the other programs that try to load do not have managed to do.  I tried to reboot in safe mode, but I also have the same problems in safe mode.  I try to run a restore msconfig.exe and system, but the error messages will be displayed until I can get the controls and prevents me from doing anything.  The problem began Tuesday night 03/08/10 after I installed a router on my modem for wireless internet for laptop of my wife.  The router is a D-link router.  I think I might have to reinstall Windows vista, or at least try to fix it, but I was not apparently received a Windows Vista disk with my computer when I bought it from Best Buy.  Very frustrating to be sure.  Any help would be greatly appreciated.  Thank you.

    If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • web pages of Windows vista won't load using multiple browsers.

    Windows Vista, 32-bit.
    Card mother with an AMD processor - built Gigabyte in 2009.

    Computer has worked for a few years, however, now, he can not complete the loading of most web pages.

    Using multiple browsers (IE, Firefox and Chrome), we see the same behavior - web pages do not just end.
    Sometimes update gets more of a page - but for videos (youtube and other sites) - it is almost impossible to load a full clip of more than 2 minutes.

    Ping/tracert works very well.
    If passing through the VPN + desktop remotely, things work very well (this confirms that he is not the access provider when you use remote desktop, we are no longer local + all device drivers which could be the problem).
    Windows Update, seems to work very well.

    Download files from a web page, does not work.

    The computer is currently connected via Ethernet (not wireless).
    We have tried this on two different networks, so it is not associated with ISP.

    We tried to connect a USB network adapter - thinking it was hardware related, but that has not changed anything.

    We have tried to start in safe mode with networking - and it still does not work (so probably not the program antivirus - mcafee).

    I was able to get a live LInux OS running on the pc, and he had no problem loading the pages/videos, ect - what is not strictly material.

    I tried using some of the Netsh command to reset tcp/ip stack - but they don't solve the problem.

    I do not think that it will fix a Vista startup repair, but I advise him to try to do.

    I'm looking for any other suggestions in addition to switch to Linux full time.

    Thank you!

    Hello

    Method 1:

    I suggest to perform a restore of the system and check if it helps.

    What is a system restore.

    Follow the link below and check if that helps.

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

    Method 2: Reset TCP/IP.

    Follow the link below and reset the winsock TCP/IP settings and check if that helps.

    How to reset the Protocol Internet (TCP/IP)

    http://support.Microsoft.com/kb/299357

    http://support.Microsoft.com/kb/811259

    Let us know if it helps.

  • Windows Vista won't load: 0x800701E7 error code

    I built this PC using a year from a friend. He put a valid XP pro OS on the computer. It worked fine until the beginning of this year when he died. I took it to my local PC repair shop and they replaced the motherboard you PSU and CPU. I tried since loading this back BONE with no luck.

    After returning the computer to the shop, they said they have fixed the bios...? In any case, I have since bought a key drive and windows vista product. My PC starts to install vista but gives with this error. It is vista ready as I have the correct specifications to have.
    Can you please help me in this case.
    Thank you

    Hello

    You can run the Windows Vista Upgrade Advisor to see if she sees some problems with the upgrade to Windows Vista.

    This error message indicates a problem with possible hardware driver.  Can you please send your hardware specifications for us?  In addition, installation when you get the error and the error message contains more information?  Please let us know so that we can help you with your problem.

    Thank you.

  • Windows Vista won't load - black screen each laptop time starts

    I have a Dell Insipron 1525, which does not load Windows Vista.

    I can't go past the Recovery Manager screen every time you start, and although I tried all the options available, it does not open in safe mode or normally.

    I tried the system restore (even if it says that it cannot find valid 'points'), as well as the repair of the system, and I have also run the Diagnostics, who said there is no error (although I could not see the final report). All paths lead ultimately to the black screen and although I can see and move the cursor, it is that I can get. Any ideas please?

    Thank you very much!

    Hi ZD_123,

    ·         Did you the latest changes on the computer?

    ·         You receive an error message?

    I suggest you follow the provided article and check if it helps.

    http://support.Microsoft.com/kb/946532

  • Windows Vista does not load all the black white backlit display.

    I'm repairing computer of my aunt. It's a laptop gateway M-6320. Windows Vista. It loads the bios and goes through the MAIL. After the POST, it just goes to a screen backlit black white with no mouse and nothing happens.

    Tried to change the boot order to boot from the cd first and put the disc of windows 7 in to run a repair (I don't have a vista cd), but it does not always load. everything sounds like it turns on and works fine. the dvd sounds like it runs for a few seconds. I also tried to boot from usb with windows 7 there. still won't load what it is. I took out the battery tested cmos it is 2, 5V. I think it was. still nothing. I left the computer for a whole night. still nothing. I changed the hard drive even though it sounds like it's working. still nothing. I even tried a windows xp cd in the freak chance, it was a bad cd. and nothing is connected to the computer while I'm trying to start. He's not going for advanced options or to try safe mode.

    I also tried to put the memtest on USB, but it will not load anything from him even with usb as the first boot option. and I tried different usb drives also.

    I can't figure what's wrong... my only thought is that the bios is corrupted or the RAM is bad. Anyone have any ideas? Oh and the bios is Phoenix

    Hello

    Since you've already tried all the troubleshooting steps, including booting from a Windows 7 disc to repair the Windows installation. If all else fails, then I think that
    It's a hardware problem. I suggest you contact the manufacturer of the laptop computer or take it to a tech store to get help.

    Kind regards
    Afzal Taher - Microsoft technical support.
    Visit our
    Microsoft answers Feedback Forum and tell us what you think.

  • Error-Windows won't load disc playback

    Monday my computer worked fine in the morning, and then I drove 5 hours back to school and when I tried to turn on the computer I got a disc «read error press Ctrl + alt + delete to restart»

    Today, I burned a copy of the disc on a Vista recovery cd and booted from there and ran a repair.

    I then also followed instructions from a forum here that says that OS was not when he ran the repair. Who cleared up the problem of disk error.

    However, now my computer still load windows. It retains a windows error recovery screen loading and I get the options to start in safe mode, normal, or last known working scene and I did all the people and they are trying to run and then the computer stops and restarts.

    I was wondering if anyone has any ideas, I'm running on the recovery disk again now to see if my operating system can be found.

    About 3 weeks ago, the hard drive that came with the computer crashed and we ordered a new one. It seems unlikely that the hard drive could fail in such a short period of time.

    I am running Windows Vista Home Premium 32 bit on my Dell Inspiron 1525.

    CHANGE 1217 CSE

    I am running the recovery disc and my screen is to System Recovery Options, and it always seems that my OS will be not registered.

    When I run windows in safe mode, it says LOADING of FILES of WINDOWS and he gets as much as

    \Windows\systems32\drivers\crcdisk.sys

    Hello

    The above error message indicates that it is not to find your operating system (Windows).
    This could be because the hard drive is physically wrong or because Windows is incredibly corrupt. Since you're not savvy computer, take the machine to a competent local computer technology.
    Do not use a type of BigComputerStore/GeekSquad of the place. Or if the machine is still under warranty, call the manufacturer's technical support.

    It will be useful.

  • Windows Vista won't let me enter a password

    Hello

    My mother has Windows Vista, and today when she went to turn on the computer, to the Vista Welcome screen, when it prompted for a password, it would not let him anything.  If she goes into repair mode when starting, it let him then and he will accept.  She has not changed recently, or someone else.  She tried to start safe mode and also checked the keyboard keys stuck and dirt.  She is old, does not know the product # and is not a disc of recovery of any kind.  For some reason any Vista simply won't let no its nothing State in the password box.

    Can we do anything?

    While she did a restore of the system scanned for malware and nothing works.

    If she can't do those steps, or they do not solve the problem, it will have to reinstall the operating system.

    Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

    Here's information from Microsoft, explaining that the policy:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

    And this is the Information from Microsoft on the problems of passwords;

    You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

    If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

    You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

    • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
    • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
    • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
    • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

    "What to do if you forget your Windows password"

    http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

    "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

    See you soon.

  • Windows Vista does not load. I just see a black screen with cursor.

    Original title: lost

    Hi I have a problem starting from computer on windos vista prem pack I just get a blank sreen one little line in the upper left corner of the pulses completely baffled box someone help that

    Hello

    you don't say if you get a logo splash screen, loading of microsoft

    read this

    1st thing to try is a restoration of the system in safe mode

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not read this information

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    And make sure you only set the CD/DVD drive to be 1st in the boot order to boot from the drive that you have just made

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  • a yellow triangle with a critical problem message, windows vista does not load on a computer laptop dell studio

    Vista Windows failed to load on a dell studio laptop, the message appears with the critical error message, but then the screen turns white after auto restart, no loading of windows. What can I do

    http://support.Dell.com/support/eDOCS/systems/WS340/en/UG/DIAGS.htm

    Try the above balance sheet of Dell Diagnostics, using F12 to start this process.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    You can also follow these steps to try to solve your problems of boot.

     

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    http://www.windowsvistauserguide.com/system_restore.htm

    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Dell recovery options:

    http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

    Above is Dell to reinstall Vista from the DVD on your computer.

    http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

    And that way if you have a recovery partition on your hard drive.

    See you soon

    Mick Murphy - Microsoft partner

  • Computer HP laptop window vista does not load please help

    someone asked this question and I have the same problem!

    I have a laptop HP who have dirtied pre-installed Vista and for some reason after installing automatically 3 updates the other day, he is not now charge up. The laptop is plugged in so it can configure 3 updates without failure (due to something like battery dying).

    When the laptop turns on, it gives me two options:
    • Start the reboot system (recommended)
    • Start Windows normally
    If I click on 'Launch Startup Repair', he comes back to do the same screen with them two options and when I click on "Start Windows normally", the laptop everything restarts and then return to this screen.
    Thus, F8-ing it does not help either - it gives me options like computer repair, Mode safe mode, last known good, etc... but none of these helped either.
    I looked around online for a solution, but most say on the use of the Vista installation CD, but the operating system is installed on a partition on the laptop (also there are files on what I would come down)... However I do not know if I can get it to boot on the installation partition either
    I tried F8, F11, F12 and nothing works

    If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Data recovery:

    1. slave of your hard drive in another computer and read/save your data out there.

    2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

    3 Alternatively, use Knoppix Live CD to recover data:

    http://www.Knopper.NET/Knoppix/index-en.html

    Download/save the file Knoppix Live CD ISO above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://isorecorder.alexfeinman.com/isorecorder.htm

    Download the Vista software from the link above.

    After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

    Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

    Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.

    Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

    When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

    Click on the icons of hard drive to open and to understand which drive is which.

    Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

    Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    See you soon.

    Mick Murphy - Microsoft partner

  • My Vista won't load fully,

    Hello

    I had this problem for a while and the sound that keeps me going on my pc the problem is when I put on, I get to the Microsoft company with the small bar that charge and my bar goes about 1015 seconds then it just freezes

    Pleasee Pleasee help me ;(

    Follow these steps to try to solve your problems of boot.

     

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    http://www.windowsvistauserguide.com/system_restore.htm

    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows Vista having trouble loading?

    My friend has an Acer laptop, running Windows Vista (I'm not sure what version it is, more likely one of the Home editions), and there are problems loading Windows. She said that the acer splash screen loads, and the computer will go as far as loading the user selection screen. She types his password and tell him to open a session, and then the screen turns off. There is no problem of 'blue screen of death '. It remains this way, even after waiting for hours. She cannot log on as an administrator and therefor can not create a new user. She did not the recovery disks.  Are there solutions?

    She can buy them from Acer;

    https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    http://www.windowsvistauserguide.com/system_restore.htm

    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows vista will not load or run.

    on startup, I get a repar recovery option. I hit that and nothing happens but a blue screen. I don't have to restar windows wndowsdisk. what I can do. cant it be started

    Follow these steps to try to solve your problems of boot.

     

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    http://www.windowsvistauserguide.com/system_restore.htm

    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

    They will tell you how to do this.

    Every computer manufacturer has their own way of making recovery disk/s.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/default.aspx/KB/326246

    'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Data recovery:

    1. slave of your hard drive in another computer and read/save your data out there.

    2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

    3 Alternatively, use Knoppix Live CD to recover data:

    http://www.Knopper.NET/Knoppix/index-en.html

    Download/save the file Knoppix Live CD ISO above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://isorecorder.alexfeinman.com/isorecorder.htm

    Download the Vista software from the link above.

    After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

    Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

    Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.

    Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

    When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

    Click on the icons of hard drive to open and to understand which drive is which.

    Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

    Now to find the files you want to back up, just drag and drop them on the USB. When you are finished,

    See you soon.

    Mick Murphy - Microsoft partner

  • How to create a family on Windows Vista Edition system repair disc?

    I can't find how to on Windows Vista Home Edition to create a startup disk. How can I do this? Thank you!

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

Maybe you are looking for

  • remote email address

    How can I connect to my email if away from home on another computer?

  • My location service does not work properly

    I have always used location-based services on my iPhone 6. But lately, I've noticed that it doesn't give me my exact position, which is annoying, because I always use for maps when I visit a big city, but it's showing that I'm somewhere else which me

  • Satellite R630-146 does support disk HARD SATA II (SATA-300)

    Hello I intend to change my current HITACHI 5K 320 320 HARD drive (HTS543232L9SA00), which is SATA I (* SATA-150 *) on the new HARD drive, but I can't find all the information my Toshiba Satellite R630-146 will support the new SATA II (* SATA-300 *)

  • OfficeJet Pro 8600: Flashing blue Internet

    After almost a year of perfect use and a change in internet provider, my printer won't connect to the network? After several attempts to enter the correct password, dissconnecting any and everything rebooted several times, I am still unable to connec

  • DAQCard-6036E - meter channels synchronization

    Hello We have three devices we want to synchronize:-' pressure' gives us an analog input-"valve" needs a square via channel 0 counter wave pulse-' cam trigger' needs a series of pulses of square via channel 1 meter waveIt works as long as it is the r