Windows Vista won't load on my computer

My Windows Vista computer does not load upwards after I log in.  As soon as I connect you I get an error message: "Windows Explorer has stopped working" followed by "Restart Windows" and then it never restarts.  I soon begin to receive error message that State that the other programs that try to load do not have managed to do.  I tried to reboot in safe mode, but I also have the same problems in safe mode.  I try to run a restore msconfig.exe and system, but the error messages will be displayed until I can get the controls and prevents me from doing anything.  The problem began Tuesday night 03/08/10 after I installed a router on my modem for wireless internet for laptop of my wife.  The router is a D-link router.  I think I might have to reinstall Windows vista, or at least try to fix it, but I was not apparently received a Windows Vista disk with my computer when I bought it from Best Buy.  Very frustrating to be sure.  Any help would be greatly appreciated.  Thank you.

If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

Download the ISO on the link provided and make a record of repair time it starts.

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

When you have changed that, insert the Bootable disk you did in the drive and reboot.

http://www.bleepingcomputer.com/tutorials/tutorial148.html

Link above shows what the process looks like and a manual, it load the repair options.

NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

Read all the info on the website on how to create and use:

http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

It's a very good Vista startup repair disk.

You can do a system restart tool, system, etc it restore.

It is NOT a disc of resettlement.

And the 32-bit is what normally comes on a computer, unless 64-bit.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • web pages of Windows vista won't load using multiple browsers.

    Windows Vista, 32-bit.
    Card mother with an AMD processor - built Gigabyte in 2009.

    Computer has worked for a few years, however, now, he can not complete the loading of most web pages.

    Using multiple browsers (IE, Firefox and Chrome), we see the same behavior - web pages do not just end.
    Sometimes update gets more of a page - but for videos (youtube and other sites) - it is almost impossible to load a full clip of more than 2 minutes.

    Ping/tracert works very well.
    If passing through the VPN + desktop remotely, things work very well (this confirms that he is not the access provider when you use remote desktop, we are no longer local + all device drivers which could be the problem).
    Windows Update, seems to work very well.

    Download files from a web page, does not work.

    The computer is currently connected via Ethernet (not wireless).
    We have tried this on two different networks, so it is not associated with ISP.

    We tried to connect a USB network adapter - thinking it was hardware related, but that has not changed anything.

    We have tried to start in safe mode with networking - and it still does not work (so probably not the program antivirus - mcafee).

    I was able to get a live LInux OS running on the pc, and he had no problem loading the pages/videos, ect - what is not strictly material.

    I tried using some of the Netsh command to reset tcp/ip stack - but they don't solve the problem.

    I do not think that it will fix a Vista startup repair, but I advise him to try to do.

    I'm looking for any other suggestions in addition to switch to Linux full time.

    Thank you!

    Hello

    Method 1:

    I suggest to perform a restore of the system and check if it helps.

    What is a system restore.

    Follow the link below and check if that helps.

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

    Method 2: Reset TCP/IP.

    Follow the link below and reset the winsock TCP/IP settings and check if that helps.

    How to reset the Protocol Internet (TCP/IP)

    http://support.Microsoft.com/kb/299357

    http://support.Microsoft.com/kb/811259

    Let us know if it helps.

  • Windows Vista won't load: 0x800701E7 error code

    I built this PC using a year from a friend. He put a valid XP pro OS on the computer. It worked fine until the beginning of this year when he died. I took it to my local PC repair shop and they replaced the motherboard you PSU and CPU. I tried since loading this back BONE with no luck.

    After returning the computer to the shop, they said they have fixed the bios...? In any case, I have since bought a key drive and windows vista product. My PC starts to install vista but gives with this error. It is vista ready as I have the correct specifications to have.
    Can you please help me in this case.
    Thank you

    Hello

    You can run the Windows Vista Upgrade Advisor to see if she sees some problems with the upgrade to Windows Vista.

    This error message indicates a problem with possible hardware driver.  Can you please send your hardware specifications for us?  In addition, installation when you get the error and the error message contains more information?  Please let us know so that we can help you with your problem.

    Thank you.

  • Windows Vista won't load - black screen each laptop time starts

    I have a Dell Insipron 1525, which does not load Windows Vista.

    I can't go past the Recovery Manager screen every time you start, and although I tried all the options available, it does not open in safe mode or normally.

    I tried the system restore (even if it says that it cannot find valid 'points'), as well as the repair of the system, and I have also run the Diagnostics, who said there is no error (although I could not see the final report). All paths lead ultimately to the black screen and although I can see and move the cursor, it is that I can get. Any ideas please?

    Thank you very much!

    Hi ZD_123,

    ·         Did you the latest changes on the computer?

    ·         You receive an error message?

    I suggest you follow the provided article and check if it helps.

    http://support.Microsoft.com/kb/946532

  • Windows Vista won't load disc

    Windows Vista 64 bit frozen and would not.  After reading the book has decided that I should restore disk factory.  Press F12 by following the instructions (I did all the retore point Jules Destrooper, no go).  After hitting F12 it says press F1, set thinking it would reformat the disk drive.  Instead it loaded Vista and it works.  Now, whenever I start the computer it shows the line F1 and I have to insert the disc to load.  What happened.

    Hello

    ·         Which version of Windows Vista you are using?

    ·         What is the brand and model of the computer?

    Regarding the recovery DVDs that you get F1 option before you start, you can try to contact your OEM (manufacturer, i.e.) for assistance.

    I hope this helps.

  • a yellow triangle with a critical problem message, windows vista does not load on a computer laptop dell studio

    Vista Windows failed to load on a dell studio laptop, the message appears with the critical error message, but then the screen turns white after auto restart, no loading of windows. What can I do

    http://support.Dell.com/support/eDOCS/systems/WS340/en/UG/DIAGS.htm

    Try the above balance sheet of Dell Diagnostics, using F12 to start this process.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    You can also follow these steps to try to solve your problems of boot.

     

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    http://www.windowsvistauserguide.com/system_restore.htm

    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Dell recovery options:

    http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

    Above is Dell to reinstall Vista from the DVD on your computer.

    http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

    And that way if you have a recovery partition on your hard drive.

    See you soon

    Mick Murphy - Microsoft partner

  • Windows Vista does not load all the black white backlit display.

    I'm repairing computer of my aunt. It's a laptop gateway M-6320. Windows Vista. It loads the bios and goes through the MAIL. After the POST, it just goes to a screen backlit black white with no mouse and nothing happens.

    Tried to change the boot order to boot from the cd first and put the disc of windows 7 in to run a repair (I don't have a vista cd), but it does not always load. everything sounds like it turns on and works fine. the dvd sounds like it runs for a few seconds. I also tried to boot from usb with windows 7 there. still won't load what it is. I took out the battery tested cmos it is 2, 5V. I think it was. still nothing. I left the computer for a whole night. still nothing. I changed the hard drive even though it sounds like it's working. still nothing. I even tried a windows xp cd in the freak chance, it was a bad cd. and nothing is connected to the computer while I'm trying to start. He's not going for advanced options or to try safe mode.

    I also tried to put the memtest on USB, but it will not load anything from him even with usb as the first boot option. and I tried different usb drives also.

    I can't figure what's wrong... my only thought is that the bios is corrupted or the RAM is bad. Anyone have any ideas? Oh and the bios is Phoenix

    Hello

    Since you've already tried all the troubleshooting steps, including booting from a Windows 7 disc to repair the Windows installation. If all else fails, then I think that
    It's a hardware problem. I suggest you contact the manufacturer of the laptop computer or take it to a tech store to get help.

    Kind regards
    Afzal Taher - Microsoft technical support.
    Visit our
    Microsoft answers Feedback Forum and tell us what you think.

  • Can we install windows vista 32 bit OS on a computer that is pre installed with windows 7 64-bit OS?

    Can we install windows vista 32 bit OS on a computer that is pre installed with windows 7 64-bit OS?

    @ Ken... I tried installinng windows vista by using the recovery disk that will get a customer with the computer dell laptop... and then he was trying to install vista on my computer... It works fine when installing files, but it is and stucks where he says 'finish installation' and he won't do anything after that... I tried to restart my computer and I could see Microsoft coportation logo and then my computer stucks to this screen and wont connect in... not sure what exactly to do... by the ways for your reply thanks

    You cannot use recovery discs to install with, if not for the exact model computer that you install.  You need a full installation detail of the model of Vista operating system you want to install since you don't downgrade your operating system to a system that offers no right of demotion.
  • How can I request media for Windows Vista to re - install on my computer?

    Re-installation of Windows Vista

    Hello

    The hard drive on my ispiron 530 has recently developed a fault and damaged my version of windows Vista.

    One of my friends then installed a copy of windows 7, I think now is an illegal copy because it requires an activation key, that I don't have.

    How can I get a copy of windows vista to re - install on the computer and I can use that came with my system activation key to activate it.

    Thank you

    Hello

    Call Dell and ask them to provide you with a recovery disk to reinstall back to the factory settings.

    Manufacturers that make normally for a fee.

    Recovery of computer manufacturers discs normally do not require a product key of your share entry.

    http://supportapj.Dell.com/support/topics/topic.aspx/AP/shared/support/DellCare/en/contact_us?c=au&l=en&s=DHS

    "How to replace Microsoft software or hardware, order service packs and replace product manuals.

    http://support.Microsoft.com/kb/326246

    Some manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer case will determine which Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    See you soon.

    PS as you do not have a Vista disc read this:

    If you have never received a recovery to buying disk, you should have a recovery partition on your hard disk to reinstall Vista from except if it has been damaged or removed from your drive hard when you install Windows 7...

    You don't give any information about the replacement of the hard disk. Everything you say is that it developed a fault, that a friend installed Windows 7.

    If you somehow fixed it and continue to use this drive, read about it using the recovery partition.

    If using a new hard drive to ignore it.

    http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

  • Computer HP laptop window vista does not load please help

    someone asked this question and I have the same problem!

    I have a laptop HP who have dirtied pre-installed Vista and for some reason after installing automatically 3 updates the other day, he is not now charge up. The laptop is plugged in so it can configure 3 updates without failure (due to something like battery dying).

    When the laptop turns on, it gives me two options:
    • Start the reboot system (recommended)
    • Start Windows normally
    If I click on 'Launch Startup Repair', he comes back to do the same screen with them two options and when I click on "Start Windows normally", the laptop everything restarts and then return to this screen.
    Thus, F8-ing it does not help either - it gives me options like computer repair, Mode safe mode, last known good, etc... but none of these helped either.
    I looked around online for a solution, but most say on the use of the Vista installation CD, but the operating system is installed on a partition on the laptop (also there are files on what I would come down)... However I do not know if I can get it to boot on the installation partition either
    I tried F8, F11, F12 and nothing works

    If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Data recovery:

    1. slave of your hard drive in another computer and read/save your data out there.

    2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

    3 Alternatively, use Knoppix Live CD to recover data:

    http://www.Knopper.NET/Knoppix/index-en.html

    Download/save the file Knoppix Live CD ISO above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://isorecorder.alexfeinman.com/isorecorder.htm

    Download the Vista software from the link above.

    After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

    Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

    Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.

    Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

    When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

    Click on the icons of hard drive to open and to understand which drive is which.

    Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

    Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    See you soon.

    Mick Murphy - Microsoft partner

  • Computer Windows Vista won't standby automatically

    I have Windows Vista.  I had a problem because I put it to sleep and he "wakes" almost immediately.  I've remedied that by changing a setting such that the network card might is no longer 'wake up' the computer.  So I can now put to sleep manually.  However, I have the 'Power Options' so that he should go to sleep automatically after 20 minutes of inactivity, but not the value.  How can I get to go to sleep automatically?

    I have Windows Vista.  I had a problem because I put it to sleep and he "wakes" almost immediately.  I've remedied that by changing a setting such that the network card might is no longer 'wake up' the computer.  So I can now put to sleep manually.  However, I have the 'Power Options' so that he should go to sleep automatically after 20 minutes of inactivity, but not the value.  How can I get to go to sleep automatically?

    No, I'm not using a wireless mouse.  Or keyboard.  I have connected the device are:

    USB stick (ordinary reader, not a flash drive)

    Phone Skype ("Logitech Cordless handset")

    Mouse, keyboard

    At the present time, no printer, but sometimes a printer

    Ethernet cable

    Speakers (which do not work, but that's another matter)

    Have you used this tutorial?
    Options power and Sleep Mode problems

    http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  • Windows Vista won't allow Windows XP games to install on my computer

    Why can't I install Windows XP Windows Vista Games? These systems are not retro-compatible? Please HELP Thank YOU

    Hello Randy Dickson,

    Another option is to try to install the game incompatibility mode. To achieve this, you can right-click on the Setup file and choose Properties. Click on the Compatibility tab and select Windows XP Service Pack 2 to see if the game will then install with these settings.

    Let us know if this problem is solved by any of the information in this thread.

    Judd
    Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Vista won't start after installation of microsoft updates

    I just install microsoft updates, then the computer is turned off and it does not load windows.  A box appears that says
    Microsoft Visual C ++ Runtime Library.
    This application has requested the execution to terminate in an unusual way.  For more information, contact the application support team.

    The options are to click OK or close the box.  I tried both and it just keeps popping up the same box as above.

    Hi Mas_007,

    Welcome to Microsoft Vista answers Forum!

    I have a few here that might solve the problem.

    A.) Firstly, I suggest that you start the computer in safe mode and check if you are able to boot without any problems, safe mode starts Windows with a limited set of files and drivers. Startup programs do not run in safe mode, and only the basic drivers needed to start Windows are installed that, follow these steps to start the computer in safe mode with networking:

    To restart the computer using safe mode, restart the computer and press the F8 key for about four to five times. Appears in safe mode listed in the advanced options of Windows. Select Safe Mode, and then press ENTER.

    (B) I suggest that you perform a clean boot on your computer, to help troubleshoot error messages and other issues; You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

    (1) perform the clean boot (check the link to perform the clean boot)

    (2) enable half the services

    (3) determine whether the problem returns

    (4) enable half of the startup items

    (5) determine if the problem returns

    (6) repeat the steps above until you find out which program or service is causing the issue

    After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

    Note: Please make sure that the computer is configured to start as usual by following step 7 of article http://support.microsoft.com/kb/929135.

    (C.) I suggest that you perform a scan of the file system [SFC] checker on the computer, the scan replaces the failed system of files with the original files from version of Windows on the computer system, follow the steps below to perform a scan:

    I suggest to empty the temp folder and later, follow these steps:

    i. Click Start > type % temp % in the start search box > press on enter > delete everything present in the temp folder.

    1. Click Start and type cmd in the box start the search.

    2. right click on cmd in the list programs and then click Run as administrator.

    If you are prompted for an administrator password or a confirmation, type your password or click on continue

    3. at the command calls, the following line and press ENTER: sfc/scannow

    When the analysis is complete, test to see if the problem you are experiencing is resolved.

    Additional information: http://support.microsoft.com/kb/936212

    Hope this information is useful.
    Let me know if it worked.
    All the best!

    Thank you, and in what concerns:
    Swathi B - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Vista won't let me enter a password

    Hello

    My mother has Windows Vista, and today when she went to turn on the computer, to the Vista Welcome screen, when it prompted for a password, it would not let him anything.  If she goes into repair mode when starting, it let him then and he will accept.  She has not changed recently, or someone else.  She tried to start safe mode and also checked the keyboard keys stuck and dirt.  She is old, does not know the product # and is not a disc of recovery of any kind.  For some reason any Vista simply won't let no its nothing State in the password box.

    Can we do anything?

    While she did a restore of the system scanned for malware and nothing works.

    If she can't do those steps, or they do not solve the problem, it will have to reinstall the operating system.

    Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

    Here's information from Microsoft, explaining that the policy:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

    And this is the Information from Microsoft on the problems of passwords;

    You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

    If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

    You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

    • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
    • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
    • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
    • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

    "What to do if you forget your Windows password"

    http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

    "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

    See you soon.

  • Windows Vista does not load

    my windows vista computer will not start, when loads of computer it offers the ability to start windows normally, if I try that it loop back to the error message, the other option which is startup repair does not work properly, the repair start gives me the option to repair the operating system, but the operating system does not appear on my screen , and the other option it gives me is to delete all my personal documents. I tried to access safe mode but it does not give me the possibility of and I have an anti virus that scans everything that I have download. I don't got no recovery disk when I bought the computer and I don't have back ups for my computer because when I tried the computer would not be complete. I don't think I have recovery points on my computer because they do not work properly when I tried to be

    Hello

    Before we get this problem resolved, I'd appreciate it if you could answer the following questions.

    (1) have there been recent changes to the computer before the show?

    (2) what is the message error full pull you while you try to load in Normal mode?

    I suggest you follow the given steps and later a update on the State of the question.

    Method 1: Check if the problem is caused by some faulty devices on your computer. I suggest that you disconnect all external devices except the mouse and keyboard to your computer and check if you can able to boot.

    Method 2: What to do if Windows does not start correctly: http://windows.microsoft.com/en-US/windows-vista/What-to-do-if-Windows-wont-start-correctly

    Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    Note: Try all the steps except the re - install the Windows Vista operating system.

    For all windows questions do not hesitate to contact us and we will be happy to help you.

Maybe you are looking for

  • anti-spam email on iPhone

    When I tag spam in Mail on my iMac as "Junk" e-mail program filter it after that. Mail on my iPhone does not work. I'm being bombarded by spammers to carpet and every day I label same 300 + emails as junk. Why Mail does not filter this kind of things

  • HP 3050 laser jet

    I have a new Dell computer that runs on Microsoft windows 7 (64 bit) then my laser jet setting all in one that I wonder what download of HP to get hooked. I chose the largest size (I think that pl6?) -in any case, the printer works fine as well as th

  • Family to share some photos?

    Well, my family is not the young family has spoken in promos. My children are on their own, but we would like to share a unique photo album that we can all contribute to what I see as possible. But, is it possible while keeping everything else, inclu

  • Keyboard lag on Satellite C660 - 11L (PSCONE) - BIOS v.1.70 problem

    Hi all I have a strange problem with my keyboard for several weeks already. It performs strangely - lag all the time. In each program or Internet site (in different Internet browsers) - characters (any) appears once and the next time don't simply wou

  • New iPad 2 Set Up Air

    Just bought a new iPad 2 Air to replace an old iPad 2 (which iOS 9.2). My old iPad has been saved using iCloud and sync with iTunes. During the implementation in place of the new iPad that I came to the part where I can choose which device to use iCl