Windows will not ask for password after disconnection and stop

machine is aspire R13, WIN 10

I set up a password for OS - on the machine, do not use a windows account. After the outside panel and closure, opening the lid takes me straight on the desktop without having to ask for a password. What is a password, if anyone can open the lid and have access to everything?

If instead of disconnecting and leaving the computer to sleep, so he asked a password to wake up - as if an unknown person will have access to the computer to wake up from sleep. How stupid!

Is that the reason for this is that microsoft is forcing me to use a MS account for the connection in order to use my machine?

From another forum, the solution was simple: change the password. Now, he asks a password after disconnection.

Tags: Acer Desktops

Similar Questions

  • Windows 8 will not ask for password on wake up from sleep

    My Dell laptop since the upgrade to windows 8 Windows 7, when I close my lid does not go to sleep, or when I wake to sleep, it does not ask me for a password, everything has been reset to the default values, but I don't know why it doesn't work. someone please help!

    The solution, as someone else has asked this question also and got the correct answer - see http://answers.microsoft.com/en-us/windows/forum/windows_8-performance/password-after-sleep/8ef46143-300e-41e8-aafb-b61782b67145 . There is a new setting of Windows 8 on top normal settings in the power settings.

    Be aware that setting how long time should pass before asking to specify a password is required is a per-user setting, so if you need to change the default value of 15 minutes, it takes to each user created on the system.

    For me, I took me 1 minute rather than always for all users, as it is pleasant, if after an accidental sleep, a user can always resume immediately. But the foregoing I have a password.

  • Apple Watch does not ask for password

    In recent days, I discovered something disturbing.  If I take off my Apple Watch and put back on without having to type in the code 4 digit, even after an extra charge per night, it will not ask for a password after an hour or two and works normally.  If it's supposed to happen?  I couldn't find anything in the support forums.

    I got my setup shows to use a password because I got it last December.

    Suzanne

    Hi Suzanne

    If you use the following settings:

    -On your iPhone, in the application of Eve, go to: My Watch (tab) > General > detection of wrist - on.

    -On your iPhone, in the application of Eve, go to: Watch My > password > enabled.

    -Also on screen settings of password - unlock with iPhone turned on.

    Then, after putting on your wrist, your watch will unlock after whatever you do first: unlock your watch manually (by entering the access code) or unlock your iPhone.

    Then, it will remain unlocked (including when the screen is idle) until you remove it from your wrist. When you remove your watch, it locks automatically.

    More information:

    https://help.Apple.com/watch/#/apd748b87e2a

  • Stor.E Slim 1 TB does not ask for password

    So I put a password on this disc using the supplied software.
    Then I took to use on another PC and it will not ask for a password?

    Do I have to install the software password on all laptops / PC that I use?

    Lock password software is needed to define the password reset / clear the password already set.

    If the HARD drive / data on the disk HARD has been already locked, you should always asked a password in case you want to access the protected data.

  • Windows Messaging keeps asking for a user name and password. What should I do?

    Windows Mail keeps asking for a user name and password.  I know that the username and password are good because I can access mail via the web.  I have two e-mail accounts.  Saturday, I installed 23 updates of windows.  Now today, I can't get into windows mail.  Why?

    Error message:

    Account: 'first name', server: 'ipostoffice.worldnet.att.net', Protocol: POP3, server response: '-ERR [AUTH] invalid user/password (error 999)', Port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC92

    Account: 'username', server: 'ipostoffice.worldnet.att.net', Protocol: POP3, server response: '-ERR [AUTH] invalid user/password (error 999)', Port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC92

    Hello

    I am happy that it works.

    It is perhaps that this has nothing to do with your system, but a 'problem' in the e-mail server of the provider.

  • Windows security credentials, ask for password.

    Since installing Windows 7 I wonder for passwords security credentials window. I don't put passwords. I can't publish expression will not deviate the cause of web.  Is there a way of either he needs to turn off the information correct installation?

    I think my solution is not to use the http or ftp command and it seems to work.  I was also able to change permissions where can register change now-thank you

  • Windows will not recognize the password

    I have reset the password using windows live reset option, but now my laptop will not accept the password and I am more able to access the laptop at all. I don't know what else to do. Help, please.

    If you change the Windows through Microsoft Account password online, it will update when you connected to the internet via your computer and when the PC is turned off or disconnected from the internet, you need to use your old password.

  • my windows mail keeps asking for a user name and password. I am entering these two and it still will not allow me on the program. I tried to delete the account and start again, he still asks for the user and the password. any suggestions?

    It gives me the error 0x800CCC90 codes, 0x800CCC91 and 0x800CCC92 he also says the username/password invalid name

    Have you taken all the measures that I suggested above?
     
    McAfee antivirus is among the three troublemakers albums for Windows Mail.
    It sometimes takes a while before the symptoms begin to appear.
    First of all, turn off e-mail McAfee analysis, even if it is rarely sufficient.
    Then delete that email account (because it has been damaged by McAfee),.
    Restart Windows Mail, and then recreate the account.
     
    If the problem persists, the only way you can prove or disprove that
    McAfee is the culprit is to uninstall it, and then using their debris removal tool:
    If you decide to replace McAfee, we recommend a free antivirus
    the program that is no longer compatible with Windows Mail.
     
    Rather than move to another antivirus, another option is to upgrade
    for Windows Live Mail (WLM), which better resists the harmful effects
    too intrusive anti-virus products:
     
    Even with WLM, you must turn off email scanning in the antivirus,
    for the reasons explained here:
     
    Gary van, Microsoft MVP (Mail)

    "ddavid01" wrote in the new message: * e-mail address is removed from the privacy... *
    Thanks I have macafee. Outlook Windows will work not be same problem.

    Gary van, MVP (Mail)

  • Windows 7 does not ask for password when password protected sharing is on.

    Hi guys,.

    I'm no stranger to permissions etc as I work in it, but it confused me after 4 hours of messing around.

    I'm trying to make sure that when I share a file on my home network that windows requires a password in order to access what it is not doing.

    The following conditions are true for both machines:

    Are windows 7 Home premium

    Have file sharing enabled on each respective network adapter

    Are members of the home network

    Are both on the network, called "WORKING group".

    Assistant file sharing was turned on and off then to make sure it wasn't an influence, it is currently off as he auto-actions the user root folder.

    Network discovery is on

    File sharing and printer is on

    I tried the two combinations of sharing folders public or not, but is currently disabled.

    Streaming media is off

    Password protected sharing is on

    Tried the two combinations of user accounts and passwords to connect to other computers. (This is currently set to allow windows to manage)

    So I won't list them the public parameters are not relevant.

    I put one hand on my laptop remove 'Everyone' and 'administrators' only have my own authorized account which is be an administrator.

    My other machine but I still seem to be able to open and access the folder. I tried to change advanced sharing permissions and security settings to exclude any group that can be let my other pc on the network but so far still no prompt for password.

    I even went to regedit and apply the following on both machines:

    1. Open Registry Editor (Start search - regedit)
    2. navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
    3. create a new DWORD value with the following properties: NAME: LmCompatibilityLevel
    VALUE: 1
    4 reboot your PC and try again to establish the connection.

    Can anyone help?

    Thank you people!

    I think I've cracked the question:

    I created a new account admin on my PC and the first time I tried to access anything, I got the password. I don't have it a second time.

    I then removed and put in the passwords and then disconnected cache and back in and asked again the password.

    I tried the same thing on my other account, but it has not yet requested.

    It turns out that even on another computer, if you have the same username and password that it automatically authorizes for good once you enter the network password first.

  • System keeps asking for password after trying to change from 32-bit to 64-bit

    I had to do another residential group to work on my computer. My password expired on my default side or administrator, the main façade of the computer where I worked on a year. I apologize I learn the computer language. I CAN NOT ENTER THE SIDE I NEED TO BE WORKING on. NOW I can't do anything on my side again without poping administrator and will ask for a password. can not download, change settings, nothing. also, I was in the process by changing my windows 7 home 32-bit to a 64-bit that came with my computer. A tech friend said he had to reinstall windows and it has installed a 32-bit.  my product key for windows 7 home is on the side of the computer for some reason, he didn't use it. I can't reinstall my windows 64-bit because the administrator request password. I can't do anything.

    Boot from the Windows 7 DVD
    Click Install now
    Accept the license agreement
    When the option is displayed to select a type of installation, click (Custom advanced)

    Select the disk partition where you want to install Windows 7 click Next.

    You will receive the following warning:

    The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

    (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

    The installation program will now begin installation. During installation, your computer will be restarted several times.

    Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

    You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

    http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

    -----------------------

    See the instructions for the networking of the different versions of Windows:

    Networking home computers running different versions of Windows

  • The cluster Agent installation does not ask for password Agent

    Hi all
    I try to install configure the management agent on a few nodes of the RAC on Windows Server 2003 64-bit. I installed the agent on other hosts before, but not on clusters. Installation seems to be pretty simple, YES the other nodes automatically detects and installs on them. However, when I do the installation of cluster, I am never invited to the agent registration page register with the administration server. He's asking the host name of the server and port, but never the password. Then the agent installs and starts the service, he is never seen by the administration server.
    Has anyone encountered this before? Is it possible to save it now, or should I just try to reinstall manually?

    This is an expected on windows cluster behavior, registration of the agent will not be asked.
    Once the user installation must ensure the agent on each node manually by emctl sure agent \bin

  • After deleting saved password and the connection to outlook he autologing got me in without asking for password, how do I stop this?

    I've removed the password registered and logged, after going to outlook.com it comes automatically me relogs without asking for a user name or password.

    Hello qqquestion, websites usually set cookies to store information that your browser is currently connected, so you have to make them disappear too: delete cookies to remove the information from Web sites is stored on your computer

  • by using a standard user account, when it is run as an administrator, system does not ask for password

    • I created a standard account for one of my children. He installed a program that refused him permission to run. I went to "run as administrator" and should be asked for a username and password to allow him to use the program. Instead he gave me the same error message access denied.
    • I then tried to implement other programs on his desk to run as administrator and they opened, but they ask me password. Why not invite me for a username and passoword?

    But the my administrator account has a password!

    Log in as administrator, and then set a new non-empty password. Now, repeat the test under your son's account.

  • CS6 Master Collection ask for password after months of use

    Why CS6 is now asking a password again after months of use?  I already entered a valid passwork during installation.  I am running on a 15 "Macbook Pro Mountain Lion.  I run Photoshop, and then I get this screenScreen Shot 2013-04-27 at 2.25.42 PM.png

    But I already have a password and have installed CS6 six months ago.  Even when I enter the password, it sticks and me and this dialog at every launch.

    Tom,

    Can you provide the AMT3.log for a look, he can help us to know the problem.

    You can find the file the slot location: -.

    \Users\[username]\AppData\Local\Temp

    Also please move the cache.db desktop file and then launch the software, serialize with the serial number and then close and reopen it.

    The cache.db file location is: / Library/Application Support/Adobe/Adobe PCD/cache

  • Error 17-Windows will not load past the splash screen, and system repair has no effect...

    Hi all, my problem is the following. Off my laptop the night before, an upgrade has been installed as usual. However, when I tried to start my computer the next day, I was meeting with a choice of operating systems, one was vista and one was something called "openSUSE 11.2 installer (NET).» Of course I wanted to choose vista, but when selected has been sent to a screen that read (sorry for the amount of the entry).

    Start "openSUSE 11.2 installer (NET)".

    (hd, 1)

    Specifien type is ntfs, partition type 0 x 7

    /openSUSe/ kernel linux devfs = mount, dall ramdisk_size = 65536 = ftp install: //ftp4.g wdg.de/pub/opensuse/distribution/SL-OSS-factory/inst-source/ server = ftp4.gwdg.de lang = en splash silent vga = 0x31A

    Error 17: File not found

    I don't know much about this sort of thing, so he thought better to include everything I could. At first, I tried to reload Vista, but it just opened the same screen, so found the vista disc that came with the laptop and it is stuck in. I ran sytem repair and system restore and both have had no effect.

    I'd appreciate any help is sorting this point, but if I have to reinstall vista (what I hear the hard disk wipes), is it possible to backup all my files to be reintergrated later.

    Thanks for any help!

    "Off my laptop the night before, an upgrade has been installed as usual."

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost, please include Error Codes, including what you have already posted, andexactly what happens after you tried to update.

    In this way, you will receive the best help.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Data recovery:

    1. slave of your hard drive in another computer and read/save your data out there.

    2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

    3 Alternatively, use Knoppix Live CD to recover data:

    http://www.Knopper.NET/Knoppix/index-en.html

    Download/save the file Knoppix Live CD ISO above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://isorecorder.alexfeinman.com/isorecorder.htm

    Download the Vista software from the link above.

    After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

    Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

    Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.

    Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

    When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

    Click on the icons of hard drive to open and to understand which drive is which.

    Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

    Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

    See you soon.

    Mick Murphy - Microsoft partner

Maybe you are looking for

  • MacBook Pro FaceTime camera does not.

    Good day to all. First of all, I want to wish everyone a Happy Easter! I am having trouble with my FaceTime on my Macbook Pro retina camera (end of 2013). I have never use the camera for nothing because I use FaceTime on my iPad and iPhone, but when

  • Satellite Pro A10 stops on specific opportunities

    Hello! I am owner of a satellite Pro A10 (PSA15E). It's hard drive stop working, the pc could not find. So I bought a new, a samsung with 160 GB, IDE, of course. Now when I was installing windows, in the part file copy, it just stopped. When I boot i

  • Satellite L670 - typing is not good

    My English is not if good fr the laptop isn't so much goo, so forgive me for the mistakes. So you can see every letter i type on the text before that my laptop is not registryIt's the same frustration myself. I buy a laptop very fast, but I have with

  • Problems using a vi countdown

    Hi all.  We use a state machine that has a delay timer in one of the States.  In the State with the delayed start, we want to display a countdown which passes from the start time to 0.  We use the example of CountDown.VI vi to do the count. The probl

  • How can I select "remember me" password?

    Several times a day when I want to wake my computer sleeps I have to type my password again. I can't find any way to select "remember me" in the Security section of the control panel. Such a thing is still possible and if so, how? Thank you.