Windows will not remain in mode 'sleep'

Similar Questions

• Hard drives will not remain in mode 'sleep'

  For two weeks, something strange happens. My hard drives in sleep mode and out instantly. They will not remain in mode 'sleep'. Any hour of delay, I place, they will behave like this. So even if I place a time to sleep 1 minute, you will hear them go to sleep and instantly out every minute, without interruption. It's used to work perfectly before for months. I have not installed anything again (with the exception of Windows updates). I checked with performance monitor, if something is accessing the disks, but there is no drive activity whatsoever. I also tried to stop the process as much as possible, but that did not help either. The only thing I've changed three weeks ago was my graphics (Radeon 6850 to GTX580) but I'm not sure that the problem started then. Only two weeks ago, I noticed the issue. If anyone else has experienced something like this?

  Hello

  You can try the steps in these links:

  http://social.technet.Microsoft.com/forums/en-us/w7itproperf/thread/06a84515-F72A-4863-87e9-73ba88e92390

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/Windows-7-sleep-mode-doesn

• HP g60-125nr notebook pc will not stay in mode 'sleep'

  does anyone know why my laptop of hp g60-125nr will not remain in mode 'sleep' when I'm done using it. It lights itself after 30 minutes

  Hello

  Have you gone through the steps in the documents?
  If you need help on the specific steps it please let me know who and I will try to provide more help. If you try to make a step and it does not please let me know what it was.

• Windows 8 will not wake up mode 'sleep'

  I have a Dell desktop with Windows 8 and he will wake up sleep mode, if it isn't being used for awhile but if left for a long time he goes to sleep and won't wake up. I tried to turn it back on

  • touch mouse
  • touch the power button / stop
  • using the windows key + C
  • no result except if I make a strong power down

  Now, he has started to download windows updates without installing

  The best that I have saved for the end... It will not cut down, it will only in power saving mode

  very frustrating... suggestions please?

  Was given this same problem and I fixed it.  Check to make sure that she is not actually wake up!  In my case was wake the computer itself, but the graphics card was not.  I could hear the processor fan back, hard disks turn upward, but nothing on my screen.  In my BIOS, there is an option to do not allow the built-in graphics adapter sleep.  It was called "RC6 make Standby" and I turned it off - fixed!

• Computer will not stay in mode 'sleep'

  Computer won't stay in mode 'sleep' when I put on standby manually. I have Windows 7 Home Premium. Sometimes, he won't sleep as set of power management.  Thank you!

  Hello

  Maybe this will help:

  Windows 7 is not going to sleep<-- check="" this="" link="" which="" might="" offer="" some="">
  http://support.Microsoft.com/kb/976877

  ----------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------

  More that might help.

  References to Vista also apply to Windows 7.

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on
  Modem and so on.

  Windows 7 problem with sleep and Hibernate Options - see the troubleshooting section
  http://www.computerperformance.co.UK/Windows7/windows7_sleep_problem.htm

  Troubleshooting Windows Vista sleep and Hibernate (also Windows 7)
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  (also Windows 7)
  http://support.Microsoft.com/kb/950686

  Sleep and extended: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Standby Mode Vista and a solution (also Windows 7)
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to disable and re-enable hibernation on a computer that is running Windows http://support.microsoft.com/kb/920730

  How to restore the default settings of the power Plan in Windows 7
  http://www.SevenForums.com/tutorials/950-power-plan-restore-default-settings.html

  
  How to change the power Plan settings in Windows 7
  http://www.SevenForums.com/tutorials/778-power-plan-settings-change.html

  How do I change the sleep settings in Windows 7
  http://www.brighthub.com/computing/Windows-platform/articles/60294.aspx

  
  How do I change the sleep settings in Windows 7 (including hybrid sleep)
  
  http://www.brighthub.com/computing/Windows-platform/articles/60294.aspx

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My hard drive will not close in mode 'sleep'

  My hard drive runs continuously when my iMac 2011 model is put into mode 'sleep' or expires in mode 'sleep'. I guess that's the drive I can hear something quietly spinning inside.and computer is a little warm. It started only in recent weeks. Before that, the computer has been completely silent and gave off no heat. the operating system is El Capitan.

  Hello, Blue Roses,

  Thank you for using communities of Apple Support.

  I see that you have a problem with the hard drive of your iMac running when your computer goes into mode 'sleep'. I know how it is important to make sure you slowed down your drive hard when you have to. I'll be more than happy to help you with this.

  You can activate the option "Put hard drives to sleep when possible" in preferences energy saver of your iMac by following this path: Apple menu > System Preferences > energy saver > put a check mark next to hard drives was able to sleep when possible. Once you have enabled this, test and see if you get the same result with the rotation of the hard drive.

  The following article contains more information on energy-saving preferences:

  Preferences of OS X El Capitan: energy saving

  If you still have a question after that, try to start your computer in safe mode and create a new user to see if you get the same result in both. This can help to identify the problem of the current user and the whole system. The following articles will help:

  OS X El Capitan: start in safe mode

  OS X El Capitan: set up users on your Mac.

  See you soon!

• ThinkPad T60 8744 will not stay in mode 'sleep'.

  I apologize if this question has already been addressed elsewhere in this forum; I looked at some length and any mention of it is found.

  I had a problem recently with my ThinkPad T60 8744-5BU running Windows Vista Business SP1.  Whenever I put my laptop sleep (whether by closing the lid or using the combo Fn + F4), it will remain so for anywhere from 30 minutes.  At one point during the transport, the laptop comes out fashion 'sleep'.  It is very good and everything except that it is usually in one of these sleeves neoprene inside my bag Targus, which means that at the time when I get where I'm going, I could use it to make pancakes.

  Because it always seems to happen while I'm away, I figured that maybe it was a problem with an Active Protection, but neutralizing him did not resolve the issue.

  Has anyone run into this problem or heard of something similar?  Any input would be greatly appreciated.

  Thank you!

  Ben

  Well, welcome to the forum,

  There are several discussions on the subject or similar. I searched using wake-up and sleep and I hope that this thread will have some useful information for you.

• Model VAIO VPCSA3AFX will not stay in mode 'sleep'

  
  

  Hi sudz28! Welcome to the community of Sony!

  I'm sorry for that matter. drtechno is right, a program or a scheduled task may be waking your computer. Please try this troubleshooting steps here:

  To prevent programs wake up your computer

  1. open the power supply Options by clicking the Start button, click Control Panel, clicking system and security, and then clicking Power Options.

  2. in the Select a power plan page, click change plan settings for the plan you want to change.

  3. on the change settings for the plan page, click change advanced power settings.

  4. on the Advanced Settings tab, expand sleep, Allow wake timers, select disable for both when your computer is running on battery and when it is plugged in, and then click OK.

  I hope this helps.

  Kind regards

  Vincent

  If my post answered your question, please mark it as "accept as a Solution.

• Computer will not remain in standby mode.

  I have a computer with Windows XP, about 5 years old who often will not remain in standby mode. After 30-45 seconds it starts again and the display shows again the office.

  Does anyone have a suggestion/recommendation what to do about it?

  Thanks, any suggestions would be appreciated.

  Hello JJLinker, welcome.

  The issue is likely caused by "Wake by " settings in your power options. This gives a shot:

  1. click on START
  2. right click "My computer" and select "Properties".
  "3. click on the tab"Hardware", then select Device Manager.
  4. expand the "Network adapters" category
  5. right click on each of the devices and select "Properties".
  6. on each, go to the tab "power management."
  7 turn off the checkbox "allow this device to wake...". ' and click on 'Ok '.
  8. close all windows and restart the computer

  Let us know what happens

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• : HP Quicktouch on screen has stopped working, computer will not remain once I connect.

  So looking at the forums and everywhere on the internet, I know this problem starts because of an update that I installed it. But what I'm trying to understand why my computer will not remain after that window opens after I connect, because it restarts whenever I log in. I became extremely frustrated with this issue and I really don't know what to do. of course, there is the system restore, but that work? I can't find quicktouch in my list of programs to uninstall in safe mode, because this is the only mode that will allow me to stay very long. so if anyone has the answer please help me, it's super frustrating.

  Hi cavalierfanatic247,

  Thank you for using the Microsoft answers Forum.
  

  Start on Safe Mode desktop.

  Remove the update that caused the broadcast of programs and features in Control Panel by clicking View installed updates.

  If you are not able to remove the update, use the utility window cleaning to remove the update. See the link below:
  http://support.Microsoft.com/kb/290301

  If the steps above did not fix the problem, try to restore the system to a previous point before windows update when it worked fine.

  To restore the operating system to an earlier point in time, follow these steps:

  Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  In the System Restore dialog box, click on choose another restore point and then click Next.

  In the list of restore points, click a restore point created before you started having the problem, and then click Next.

  You have an Essentials and HP drivers disk?

  If the system restore is not enough, you can use the HP Essentials and the disk drivers to uninstall and reinstall the quick key.

  Click Finish.

  You can see the link below for more information:

  http://support.Microsoft.com/kb/936212

  I hope that this will really help you, good luck.

  Kind regards
  Manasa P-Microsoft Support

• Qosmio X 300 - 11W - TouchPad does not work in mode 'sleep'

  TouchPad does not work in mode 'sleep'. I can't wake up my computer using a touchpad. I downloaded and installed a driver for Windows 7 32 bit from a page of the Synaptics driver, but it did not help.

  Can you wake up your Qosmio using the power button / stop?
  You close the lid when the laptop enters the sliding mode?
  After you open the laptop lid should wake up. It work correctly?

• OfficeJet HP 6830: officejet hp 6830 does not respont in mode 'sleep' via an ethernet connection

  HP officejet 6830 does not respont in mode 'sleep' via an ethernet connection.

  This isn't the case via a usb connection.

  What can I do?

  Hey @George5500,

  Welcome to the HP Forums!

  I understand your JO 6830 unresponsive when it is in standby when you are using the Ethernet connection, but it does not occur when connected via USB.

  We will perform a hard reset. To do this, leave the printer and unplug the power cable for 1 minute. While it is unplugged, press and hold the power button on the printer for 10-15 seconds to release built his power, then after the minute, plug the printer in. Also, even if you have used a surge protector/power bar this whole time and you feel this isn't the cause, please plug it in to a wall outlet so that we can eliminate the source of energy as the primary cause.   Questions when it is connected to an uninterruptible power supply/Strip/surge protector power

  * In this document, you will see, QUESTION: questions or problems may occur when a printer HP LaserJet series printer is connected to a UPS (UPS), a power strip or a surge protector that is not limited to the Laserjet printers.

  I can't wait to hear back on your part. If performing a hard reset, or move the printer to a socket solves the problem, please click Accept as Solution button below so that the community can see your problem is solved. If the problem persists, please don't forget to leave me and I'll do everything I can to help.

• The program window will not bar restore tasks

  I work for a school district where we all connections.  On one of my teachers computers, when it opens a certain program it automatically minimizes and will not restore a mode full-screen.  It does via a shortcut as well.  However, when I log in, it works fine.  Any ideas how to fix?

  Hi afmtsu,

  ·         Are what program you referring?

  ·         These computers are on a network?

  ·         If it works well before?

  Check to see if the following is useful.

  Method 1: You can uninstall and reinstall the program to check the issue.

  How to change or remove a program in Windows XP

  Method 2: Perform a system restore to the date when it was working fine.

  How to restore Windows XP to a previous state

• Windows will not update - "the location where updates WIndows stores the data changed.... »

  original title: windows will not update - please help

  I get the message "where Windows Update stores data has changed and should be repaired" How can I change this so that I can update my computer?

  How to reset the Windows Updates components?

  http://support.Microsoft.com/kb/971058>

  Download and Save the fix it 50202 from the page above.

  Close all the open browsers and programs prior to execution of the fix it.

  Since the downloads fail, when run you the fix it choose its default mode when you run it the first time.

  When he finished, check if download updates now.

  If the updates are still not download after you run it, then run it again and choose his Aggressive mode.

  Then reboot and see if the download updates now.

  UTC/GMT is 19:07 Monday, December 26, 2011

• Messages that appear to be malicious will not remain in the folder deletion... they simply re - appear in the Inbox in seconds.

  Evil emails will not be removed

  I have Windows XP and MSN email.  I have two emails, responses to facebook friends who seem to be malicious and will not remain in the deleted folder... they simply re - appear in the Inbox in seconds.  When I click on it, or even click on an email near them... my security appears and says that someone is trying to steal the credit card...

  Hi DougFergus,
   
  I recommend you to contact MSN support team to improve assistance to this topic:
  How to contact MSN customer service