Windows Windows 8 does not properly after deleting important files to user (already tried everything I found things different from +-10)

Similar Questions

• Windows 7 Ultimate: Explorer is not refreshed after deleting a file, the deleted file still appears in the window, on the manual "Refresh" the file is deleted

  Windows 7 Ultimate: Explorer is not refreshed after deleting a file, the deleted file still appears in the window, on the manual "Refresh" the file is deleted.

  I have also changed the CLASSID HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\ {BDEADE7F-C265-11D0-BCED-00A0C90AB50F} / instance DontRefresh value to 0

  Hello

  (1) have you made changes before the start of this issue?

  (2) what happens when you try to start in safe mode?

  To start your computer in safe mode, you can see the link below:

  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  I suggest you to place the computer in a clean boot state and check if the problem is resolved:

  1. sign the computer by using an account with administrator rights.

  2. click on Start, type msconfig.exe in the Start Search box and press ENTER to start The System Configuration utility. If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  3. on the general tab, click Selective startup, and then click on to clear the load startup items check box. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the hide all Microsoft services check box, and then all disable.

  5. click OKand then click restart.

  6. check if you still have the problem.

  See the link below for more details:

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual after you have finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click Start , type msconfig.exe in the Start Search box and press ENTER.

  1. If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click restart.

  If this does not work, try to run a SFC scan. To do a SFC scan follow the steps below:

  Use the System File Checker tool, which is also called scan SFC.

  File system (CFS) auditor verifies that all Vista system files are where they should be as they are by default and not corrupted, changed or damaged.

  1. click on Start, click principally made programs, Accessories, right-click on command promptand select Run as Administrator.

  2. click on continue or provide administrator credentials if prompted.

  3. in the command prompt window , type the following, and then press ENTER:

  sfc/scannow

  4. you should see messages on the screen the following:

  From the analysis of the system. This process will take time.

  Start of the phase of verification of the scanning system.

  % Of verification complete.

  5. once scanning is complete, check to see if the problem you are experiencing is resolved or not.

  Hope the helps of information.

• Windows import program does not close after you import photos from a camera.

  Windows import program does not close after you import photos from a camera. It is frozen on the desk and the computer must be restarted to use the program again, windows does not detect a problem, how to fix it.

  original title: importer of photo and video for windows

  Hello

  1. which version of the operating system is installed on the computer?
  2. don't you make changes on the computer before the show?

   
  Method 1:
  You can perform a clean boot and check if the problem occurs.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.
  
  Method 2:
  Alternatively, you can change settings for importing pictures and videos in windows by following the steps from the link.
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos
   

• Installation of Windows service does not work after Windows Explorer 9 uninstalling and reinstall Explorer 8

  Installation of Windows service does not work after Explorer 9 uninstallation and reinstallation of 8.  I followed several suggestions on this forum, but still no luck.  I ran the SFC system twice, who told me he had corrupted files.  "Some have been repaired and some might not be."  I then went in the event viewer after a start to the top and he stated that the 'Adobe APM service' is not found.  Also the "hpqddsvc' and the 'gupdate' is not found.  He tries to install something every time I start, but he abandoned.  I checked whether the system is on and disabled.  It's on.  There are a lot of small problems, but my main concern is the Adobe program.  I tried uninstalling and reinstalling Adobe, but still get an error message that the Windows Installer Service could not be accessed. Other suggestions?

  Hello

  I suggest you follow the link and check.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

• Windows Vista does not start after installing Linux OS

  original title: Windows Vista does not start after the installation of the Linux OS... Help!

  I installed Fedora 10 Red Hat Linux on my HP laptop and now each time it powers on, I can't do vista windows at startup.  Goes directly into Linux.

  I need to get back to normal.  Any help would be appreciated.

  I installed Fedora 10 Red Hat Linux on my HP laptop and now each time it powers on, I can't do vista windows at startup.  Goes directly into Linux.

  I need to get back to normal.  Any help would be appreciated.

  Hey Oscar Jose

  Download the correct ISO file and make a disk bootable from the link below

  Then use the Startup Repair option when you start from

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  or at startup press F11 to start the process of restoration of hp and see if you can reinstall vista from the recovery partition and place your machine, back to the way you bought

  warning you all data loss and 3 third-party programs that you have installed unless there is a non-destructive option in your hp recovery options

  Thirdly try to ask in a fedora forum to solve the problem, he has caused

  http://fedoraproject.org/

  Walter, the time zone traveller

• My work as a Photoshop Mix does NOT have the Adobe library.  I have already sent more than 100 things at the library (successfully!)  It has now stopped working.  Photoshop Mix not send.  If I delete the Photoshop Mix of iPad Pro.  It will remove a

  My work as a Photoshop Mix does NOT have the Adobe library.  I have already sent more than 100 things at the library (successfully!)  It has now stopped working.  Photoshop Mix not send.  If I delete the Photoshop Mix of iPad Pro.  It deletes all the pictures in Photoshop Mix?  I had technical support look in my ADOBE Office without success. (case 187698996)  Thank you.  I have several files in the Adobe library and checked all the. Nothing appears from my Photoshop Mix.

  Thank you.

  Susan hers

  Update: Susan fixed this problem by uninstalling and reinstalling the application.

• Windows Update does not work after the hard drive has been replaced

  Hello
  I have the same problem, replaced in my Toshiba HD, rebuild from Sysimage, Windows Update does not work. A ran "fix the problem with the Microsoft Windows Update is not working.
  Problem still exist.
  The message that I got while trying to update: "Windows Update cannot currently check updates,
  because the service is not running. "You may need to restart you computer.
  Stop and then restart the service, still no luck.

  I ran Windows troubleshooting. He finds two problems with Windows Update components, it corrects.
  The problem still exists.

  The other post:

  Another interesting fact:
  After the reconstruction the new disk, user account control does not recognize Windows programs.
  for example: execution of Perfmon.exe, the Publisher is unknown! However, when I download the program Windows FixIt, Publisher is recognized as Microsoft Windows. It seems that user account control does not recognize the Windows programs that had found the new HD, but acknowledges those who is downloaded from the internet.
  I guess there is a problem with the license, Windows was preinstalled on the Toshiba and replace the hard drive could have caused a few conflicts of licensing.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Update-not-working-after-hard-drive/77ab54ca-34b0-49DF-a268-bd07db68d887

  The same problem. Cloned old HD on a larger hard drive. Everything worked perfectly except NO indexing and update WITHOUT windows - the two recurring problems that seem to appear on the forums after a change of hard disk.

  INDEXING resolved with change to "Intel rapid storage technology." Google what I put in quotes, choose the Download Center and get the specific to your OP and the controller software.

  UPDATES have been a little more frustrating. The microsoft .fixes and convenience stores were without help.

  Go to control panel / system and Maintenance / administration tools

  Select Services

  Stop the Background Intelligent Transfer Service

  Stop Windows Update

  In 'My Computer' go to Windows / Software Distribution

  Right-click "DataStore" folder. Rename it to Datastore.old

  Rename the folder 'Download' Download.old

  Return to Services and restart the Background Intelligent Transfer Service and Windows Update.

  Look for the updates. It will take some time because you deleted the database.

  I hope this helps!

• Windows 7 does not start after reboot.

  I did a fresh install of windows 7 ultimate. Setup was good, he began, updated, installed some drivers and software, tried to reload and bad news. Restarting stopped with a white screen where the startup screen should be. I turn off the cpu and no problems at windows startup. I tried several times and no luck. If the restart from the menu start, it stops at the empty screen. "I seek answers and possibly other charges was installing, disabled all updates and disconnected all the printers, speakers, etc." and again not luck. After that first start and the processor does not start after a reboot. It stays on with a blank screen and no response to keyboard... Help, please...

  I corrected this easy on my HP 7100

  Go to management, records and defined as being active, then fixed, make a right click on the partition with windows on them might have to boot windows disk and choose repair option 2 times I found on a model of friends. Anyway, problem fixed, now able to restart (warm start)

• Windows Update does not work after restoring Windows.

  I have a HP Mini 210-2080NR netbook with Windows 7 starter (31-bit). My hard drive failed and I replaced it. I ordered a USB HP recovery and then reloaded Windows 7 on new hard drive using the USB recovery drive.

  After reloading Windows 7, Windows Update does not work.

  This is the error I get:

  Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.

  My connection is OK.

  I restarted my netbook and the error is the same.

  I reloaded Windows 7 and the error is the same.

  Any suggestions?

  Thank you

  eknaphus

  Hello

  You can try and install it and check:

  Intel Rapid Storage Technology

  After that it gets installed restart and check again. Let me know if this does not help...

• Windows Installer does not properly error Code: 641

  HAVE WINDOWS VISTA HOME PREMIUM WINDOWS SETUP DOES NOT CORRECTLY GIVES 641 ERROR WHEN AUTO UPDATE TRIES TO INSTALL IMPORTANT UPDATES.  DON'T ME LETS NOT UNINSTALL A PROGRAM SAYS CAN'T ACCESS THE WINDOWS INSTALL.

  You have installed system mechanic? This is what it seems possible that a recent analysis could have messed up windows installer, so causing problems similar to what you describe.

  I followed the instructions in this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Installer-and-error-codes-641-80070641/24fd9f52-7faa-4f80-8f8e-8c7cd80dd481

  Easy to follow, even for an old man like me.

• Windows Mail does not respond after receiving a script error message.

  Whenever I press a button made a noise of ping?  can not shut down windows.  Just does not respond?

  "Em" wrote in the new message: * e-mail address is removed from the privacy... *

  Whenever I press a button made a noise of ping? can not shut down windows. Just does not respond?

  Right click on the taskbar background > select Start Task Manager, on the Applications tab, select Windows Mail > then end task.

  Best regards Steve. MS - MVP. MAIL. [DTS] UK. http://www.getsafeonline.org/

• Impossible to uninstall the windows installer does not properly

  I can't uninstall a program because I get the message Windows Installer does not work correctly... contact support

  Have you tried to install the latest version of Windows Installer?

  Otherwise, try to run the following from start-> Run:
    msiexec /unregserver
  Then,
  msiexec/regserver
  
  
  
  

• Memory of the computer on the Local C drive does not increase after deleting all the photos and the video.

  On my computer, the operating system is Windows Vista Home Premium. I am facing a problem, in which case, the amount of gigabytes, on the Local C drive.

  does not increase after remove/delete all the photos and video to my computer.

  I've done a disk cleanup.

  Any help will be greatly appreciated.

  Elliott R.

  Hello

  Check if the files that has been deleted and still resident in the trash, if so, empty the trash.

  http://Windows.Microsoft.com/en-us/Windows7/permanently-delete-files-from-the-Recycle-Bin

  Method 1;

  I suggest that you run the System File Checker.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Test the issue in a new user account.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

• The Oracle optimizer automatic statistical work does not run after full import

  Hi all
  
  I did a full import in our QA database, import was successful, but GATHER_STATS_JOB does not work after sep 18 2010 if its activation and on demand, I question last_analyzed table to check and confirmed that he has not run after sep18, 2010.
  
  See below for the output
  
  OWNER JOB_NAME HIS STATE START_DATE END_DATE LAST_START_DATE NEXT_RUN_D
  ------------ ------------------------------ ----- --------------- ---------- ---------- ------------------- ----------
  SYS TRUE REGULAR GATHER_STATS_JOB 2010-09-18 06:00:02
  
  
  Collection of statistics work defined automatic optimizer Oracle
  
  =======
  
  SQL > select JOB_NAME, STATUS, OWNER, REQ_START_DATE,.
  TO_CHAR (ACTUAL_START_DATE, ' dd-mm-yyyy HH24:MI:SS) ACTUAL_START_DATE, RUN_DURATION
  of dba_scheduler_job_run_details where
  job_name = order of 'GATHER_STATS_JOB' by ACTUAL_START_DATE asc; 2 3 4
  
  OWNER JOB_NAME STATUS REQ_START_DATE ACTUAL_START_DATE
  ------------ ------------------------------ ------------ ------------------------------ ------------------------------
  RUN_DURATION
  --------------------
  SYS GATHER_STATS_JOB MANAGED 16/09/2010 22:00
  + 000 00:00:22
  
  SYS GATHER_STATS_JOB SUCCEEDED 2010-09-17 22:00:02
  + 000 00:00:18
  
  SYS GATHER_STATS_JOB SUCCEEDED 2010-09-18 06:00:02
  + 000 00:00:26
  
  
  What could be the reason for the GATHER_STATS_JOB job does not although his game to automotive
  
  SQL > select dbms_stats.get_param ('AUTOSTATS_TARGET') of double;
  
  DBMS_STATS. GET_PARAM ('AUTOSTATS_TARGET')
  ------------------------------------------------------------------------------------------------------------------------
  Auto
  
  Someone has this kind of experience, please share
  Apprecitate your answers
  
  Concerning
  SRH

  ? So basically you're saying is if none of the tables are changed then GATHER_STATS_JOB will not work, but I see tables are updated again the task does not run. I did > dba_scheduler_jobs request and the State of employment are true and regular. Please see my previous post on the output

  Am I missing something here, I get some parameters parameters

  So basically you are saying is if none of the tables are changed then GATHER_STATS_JOB will not work.

  GATHER_STATS_JOB will take place, and if there is no table in which there is a 10% change in the data, it will bring together statistics on this table. If no data in the table have changes less than 10 percent, it will bring together not statistics.

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14211/stats.htm#i41282

  I hope this helps.

  -André

• HP pavilion ab027tx 15: Equalizer b & o does not properly after the update of windows 10

  I've updated to windows 10. .and I have installed the latest driver realtek audio on my laptop from the HP website.

  The B & play 0 appears in the control panel and list of icons. But I am not able to change the mode(music/voice/movie) in the room B & O when you listen to music and watch YouTube etc .i have reinstalled the driver realtek audio, but the same problem appears. Please tell the solution for this problem

  It does not work when I use my headset

  Hi there @pavan_014.

  Thank you for visiting the Forums HP's Support and welcome! I think the problem you are having is your sound and headphones since the Windows 10 upgrade.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Although you had already uploaded/updated new drivers, I would suggest trying to uninstall all the drivers of its current:

  • Go to the Device Manager
  • Click sound, video and game controllers
  • Right-click on the audio driver
  • Click on uninstall
  • Restart your computer laptop twice
  • Try the speakers

  You can use the HP Support Assistant's drivers. Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated for Windows 10.

  Are - what you happened to try the audio Troubleshooter? It might be able to solve your problem automatically.

  You can find the great troubleshooting steps in document No. sound from speakers as well as resolution of the headphones and headset problems. This document contains several troubleshooting steps that may prove useful.

  Please follow provided the troubleshooting steps, re-post and let me know the detailed results of the troubleshooting.

  Thank you!

  Have a great day!