Windows XP 2002 service pack 2 does not have internet explorer 7 or 8.

Recently, I took out my old laptop. Windows XP 2002 Service Pack 2. I was using internet just fine, then when I went to a Web page (don't remember now).

He said that my computer needed update to IE 7 to the support page. I tried to load this (update) over and over again with
no luck. Then I lost internet all together. He said it was impossible to load it and said to go to www.// This address has not yet been loaded.
I did extensive research on the question/answer of windows page.
What can I do to make it work again? I still have a lot of memory etc left on the computer.
The biggest problem is that I have NO internet now on this old PC, to do something about it. I use my laptop more recent to ask
This question.
Thank you for your help :)


1. do you get an error message?

2. what happens when he tries to open Internet Explorer?

You can perform the steps mentioned in the link below

How to troubleshoot network connectivity problems in Internet Explorer

You can check this link:

Windows wireless and wired network connection problems

It will be useful.

Tags: Windows

Similar Questions

  • service pack 3 does not load because of kbdhid.sys in use

    service pack 3 does not due to kbdhid.sys in use, I was updating after a repair windows, service pack 2 is installed, but the service pack 3 will not get spent about 1/2 in point because it says the kbdhid.sys open or currently in use, and there is no way to remove or stop in sys.32 drivers as it says it is used and there seems to be no way of knowing What to use.


    I suggest you to follow the steps in this link and check if it helps:

    Also check out this link:

    It will be useful.

  • I have Windows XP Professional Version 2002, service Pack 2. I have this operating system in English only. Now, I would like to add Arabic language. How can I do?

    I have Windows XP Professional Version 2002, service Pack 2.  I have this operating system in English only.  Now, I would like to add Arabic language.  How can I do?


    You want to change the display language on the system or the keyboard layout?

    Method 1:

    Language packs

    Method 2:

    a.Click Start and then click Control Panel.

    b. double-click regional and Language Options.

    c the languages tab, click details, and then click Add.

    d.Under an input language, add the language that you want to use.

    e.Under configuration keyboard/IME, click the keyboard layout you want, and then click OK.

    List of languages supported in Windows 2000, Windows XP and Windows Server 2003

    Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

  • I need to install Flash Player on a computer that does not have internet access. The 'flashplayer18_d_install.exe' I copied everywhere that 'no Internet' computer wants to deal in the internet to do something and of course fails. I need a ins

    I need to install Flash Player on a computer that does not have internet access. The 'flashplayer18_d_install.exe' I copied everywhere that 'no Internet' computer wants to deal in the internet to do something and of course fails. I need an installation file that won't connect to the internet. -help

    Hi colinkerr22,

    Offline installers are displayed at the bottom of the Installation problems | Flash Player | Windows in the section "problems".



  • When updating vista on laptop to the service pack 2 does not update

    We get an error 8024200d

    and it fails to install the update, how do I fix for my sister

    How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
    [Error 0 x 80070002; 0x8007000D; 0 x 80073712; 0x800b0100; & 0x8024200D]

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Windows Media Center, digital cable Advisor, do not have Internet?

    I have a tuner Silicon dust 3 with a Chartered CableCardM that has been posted successfully & work, software to view the tuners of

    Silicon dust works OK for the first 14 channels, but trying to watch all channels is protected by DRM are not displayed.  But I try to go back

    & run the DCA in the Gallery of Extras to start more (haven't run it the first time for the installation of the dust of Silicon Tuner), but after starting the application, I get just the

    message "NO INTERNET so it does not further.  More funny thing is, there are other applications that appear to work (CinemaNow, XMSirius, FOX, the)

    Queensberry), those start & go to the respective web sites.  Also the Home Shopping Network can not find the internet as well.  I made the Internet connection

    test under the settings menu, which removed OK.  My browser explore works very well too.  Do you have the download in WMC so to check updates.

    Strange, is that I tried this on another computer laptop, first of all, one with which I worked was a former model from HP.  Now tried with a new Dell XPS.  Both

    running WINDOWS 7 service pack 1, the two have some Blu - Ray players & outputs HDMI.  No laptop will start the DCA, simply gives the 'NO INTERNET CONNECTION'

    error.  Stuck for now, seeking advice, no mention of DCA does not start, so I tried to not post this embarrassing question.


    Well well, thank you MattFTD for taking the time to read my dilemma.  I actually had things to work, but was

    the difficulty to understand why the two laptops have had the same symptoms.  Had the Dell XPS one

    expired version of Norton 360 (& System Mechanic was also exceeded in my opinion), so I renewed the two sub -.

    scriptions & let the scans run & do all the maintenance with the two programs.  Then the Norton 360

    not start again for a reason any.  Had to reload Norton 360, it received in operation.  After all the high-

    dates have been made, I am back & tried the digital cable Advisor, now it started up nicely & went

    through Setup is fine.  Do you have the same maintenance on my HP laptop, now DCA worked on it as

    Well.  Got the channels to the digital tier very well on the HP, still needed to install the unit of Silicon dust on the

    Reference Dell.   But now, that's progress.  Best reviews, maybe something in the registry for the DCA application was not

    System Mechanic & game directly put things together.  Do not know why the two laptops had the same

    problem.  Also thought the Norton 360 firewall may have been an obstacle.  I am returned & makes sure

    the firewall feature worked, represented the DCA, has worked only elsewhere too.  One more step

    to throw my leased cable boxes!


  • Service Pack 3 does not completely load on Windows XP despite trying Mr. Fixit and clean boot.

    Windows Update says that our computer requires Service Pack 3.  However, after about 70-80 MB or more very slow laborious effort he stops and tells me that download has failed.  The same thing happens when you try to load the update Garmin map that need Net Framework 4 - it's just too hard for her.  I tried mutual aid run Mr Fixit solutions [who proudly says he fixed three different things and installed Powershell for me] and also do a clean boot manually.  They have produced no benefit at all.  Any advice would be welcome.

    First of all, make sure that you have enough free space on your hard drive:

    Can download SP3 from and run it.

  • Microsoft windows xp media edition version 2002 service pack 3 will not install these updates any reason why?

    A security update for Windows XP Media Center Edition 2005 Update Rollup 2 X 86 Edition (KB2502898)
    Update of security for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2446708)
    Update security for Windows XP (KB2503658)
    A security update cumulative for the stop bits ActiveX for Windows XP (KB2508272)
    Update security for Windows XP (KB2412687)
    A security update cumulative for Internet Explorer 8 for Windows XP (KB2497640)
    Update for Windows XP (KB2524375)
    Update security for Windows XP (KB2506223)
    Update security for Windows XP (KB2485663)
    Update security for Windows XP (KB2481109)


    Do you have an error message when you try to install updates?

    I suggest that you put your machine in a clean boot State, then try to install the updates. I suspect the involvement of a third party software conflict.

    Note: Do not forget to put your computer in normal mode.

    Also see the following articles:

  • Installation of Service Pack 1 does not not on Visa? Guard's fault. So frustrated.

    Well, then I begin to learn more and more programs want upgrade you all the way to service pack 2. WELL, I HAVE EVEN 1 YET. Because it won't work on my computer! I've tried everything. I get the error Code: 800736B 3. I have Windows Visa family premium, it came WITH my computer and I had a few years back so I do not remember if a CD came even with it. I have no idea what to do and I am so incredibly frustrated. Please HELP :(

    Well, you're really between the proverbial rock and hard place here, my friend.

    Norton 360 v5.x (AKA Norton 360 2012) will not install unless & until the Vista SP2 is installed - and you can't even get installed SP1 (because the free trial period of Norton had expired because you have never run the removal tools when appropriate or because of your misguided use of registry cleaners).

    All that being said, your best bet now is to format the hard drive and then do a clean install of Vista. [Note: a repair installation will not fix this!]

    See the poster in this thread and follow the instructions of (my) WHOLE (to-the-letter and in order! ) to restore your computer to a State safe & functional:

    If you need assistance with the clean install, please start your own, new topic in this forum & advice:

    If the procedure is outside your technique "comfort zone" - and there is no shame in admitting this isn't your cup of tea - take a local, the good reputation of the computer and independent computer (that is, not "BigBoxStoreUSA" or Geek Squad) repair shop & let them do the work.

    Note: The computer must NOT be connected to the internet or local area network (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

    Wish I had better news for you.  Good luck!

  • Windows XP service pack 3 download not have service pack 2 have 32 bit version home

    computer had to be restored to the factory setting.  HP Compaq Presario V5000.  has been successful.  Watch service pack 2 Windows Xp home 32-bit version. [Cannot download SP3 shows error number: 0x8024400A]. Can someone help me? Thank you

    See this previous discussion-online

  • Clean install of windows xp, PC does not start Internet Explorer

    I did a clean install of windows xp, but my PC does not start under Internet explorer, nor can I install browser of my ISP with the drive, they gave me.

    I made a second clean install & noticed that the installation seems to ignore the part that asks about the connection to the internet. At this point, the command prompt screen flashes up & then closes. The installation continues her & ends.

    Can someone help me please?

    Good job; Yes!

    Your specs are here:
    Since you have the video and audio embedded, download the drivers for which follows on a USB key:
    • Chipset (nVidia_SMBus_A02_R132919.exe)
    • graphics - on Board (driver nVidia: R133260.) (EXE)
    • audio - aboard (the SIGMATEL driver: R132395.) (EXE)
    • network, which will allow you to get online! -Broadcom driver: R149798. EXE
    Then download other files mentioned in my instructions (SP3, IE8, MSE) and go to town!

  • Windows 7 as a DLNA server does not have subtitles

    Hi all.

    I managed to use win7 as dlna server on my LG TV...
    and it's amazing!

    But I am facing serious problems to work the subtitles...

    I tried several types of media... I have the .srt file in exactly the same name as the video...
    But no way for it load titles correctly.
    In addition, if I play the file on my computer using Windows Media Center, it does not show subtitles either...
    I had to install an extension (ffdshow) to activate the subtitles on Media Player.
    Thanks in advance!

    Thank you very much for the reply!

    But who did not help in all cases. In fact, I was able to get subtitles works on windows media player using ffdshow...
    But reading on the computer windows media center and DLNA streaming is still missing subtitles.
  • My Windows 7 ultimate is authentic, but does not have the activation key, can somebody help me please?

    I got my school of hollow of W7 and is still viable, had a key that worked very well, until I was stupid enough to try to use the kode to 64-bit upgrade, now it does not turn on and I don't know if I can return the old key. It is a MUST to activate? If so help! AS SOON AS POSSIBLE

    How to activate Windows 7 or Vista manually (activate by phone)

    1) click Start and in the search for box type: slui.exe 4
    (2) press the ENTER"" key.
    (3) select your "country" in the list.
    (4) choose the option "activate phone".
    (5) stay on the phone * do not select/press any option * and wait for a person to help you.
    (6) explain your problem clearly to the support person.
    (7) the person must give you a confirmation ID, copy it down on paper,
    (8) check that the ID is correct in reading the support person.
    (9) to enter the ID number, then click 'Next' to complete the activation process.

    ----------------------------  Alternatives -------------------------------------

    To enable the use of the phone
    1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
    then by clicking on activate Windows now. ?

    2. click on show me other ways to activate.

    3 type your Windows 7 product key, and then click Next.

    4. click on use the automated telephone and then click Next.
    If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    5. click on the location nearest you from the drop-down list, and then click Next.

    6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

    7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

    8 Note the confirmation ID the phone system gives you.

    9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

    10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

    How to contact a Microsoft Product Activation Center by phone

    Microsoft Activation centers worldwide telephone numbers:
    (This site is for activating Volume License, but if you call, they will help you)

    The phone number is not working:
    Microsoft Wordwide contacts:

    Register Windows 7
    Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
    filled with tips, creative tips and other information to you help get the most out of Windows 7.
    You also get a subscription to the monthly newsletter of Windows Explorer,
    where you will find other tips and tricks, as well as special offers.

    Activation and registration of a Microsoft product
    http://support.Microsoft. com/ ? kbid = 326851
    Windows activation: (888) 571-2048

    Learn about Activation:

    J W Stuart:

  • drive obsolete error Firefox flash does not in internet explore

    Firefox error drive flash as being obsolete. This does not happen on the internet explore. also when I have more drive that the error firefox does not remember returns the same error. "this record is vulnerable and must be updated. "
    with a red circle and a bar.
    also flash seems to crash frequently. tried to update flash player and firefox locked up and ran very slow. is there an alternative to the RAS player.

    Firefox needs a different version of Flash to use Internet Explorer or Google Chrome. For some reason, Adobe has created different versions for IE and Netscape browsers (what Firefox was initially based on) all the way back at the end of the 1990s. Then when Chrome came with its own plugin API, Adobe creates a 3rd version of Flash for Google.

    You can download the latest version of Flash from this page:

    What is an alternative to Flash, Mozilla working on one that is the name of Shumway of code.

    Unfortunately, it is far from being completed and at this stage is designed only for advanced users to 'play with' or test and provide feedback to the developers.

  • At the opening of my ISP (juno) site is GREATLY reduced. Does not in Internet Explorer. something is wrong in FF



    Reset the zoom of page on pages that are causing problems.

    • View > Zoom > reset (Ctrl + 0 (zero); Cmd + 0 on Mac)

Maybe you are looking for