Windows XP and intermittent connectivity of Toshiba Satellite problems

Similar Questions

• Hello! I have already booked for upgrade of Windows 10 and my unit is Toshiba Satellite C850D and currently using Windows 7. What should I considerdo before you install the new Windows 10?

  I'm afraid that all my files on disk: D will disappear.  And how do I know that my existing drivers and programs are compatible with windows 10?

  Hi JC Nero,.

  Windows 10 being an upgrade of your existing operating system, it would be absolutely not delete or edit your files, settings, programs, etc. Your PC after the upgrade to windows 10 would be same.
  However if you choose a clean installation, the contents of your drive where is installed earlier OS might be deleted if you format.

  The answer to your question is given by Windows 10 App itself. To check compatibility:

  • Open Windows 10 booking App.
  • at the top left, click on the Menu (3 vertical lines)
  • Click on the control of your PC.
  • It will show if there are problems with compatibility.

  It will be useful.

• I recently installed Windows 7 and you connect via RDP.

  * Original title: activation of Aero?

  Hi, I recently installed Windows 7 and you connect via RDP. When I plugged in, I was greeted with Standard Windows, I went in tge customization panel but when I click on an aero theme, said that some parts of the theme have been disabled because I was using remote desktop. Is there a way I can enable Aero via Remote Desktop?

  Aero feature is disabled in all versions except versions ultimate and Enterprise

  Aero glass remoting

  https://en.Wikipedia.org/wiki/Windows_7_editions#Comparison_chart

• I am running windows vista and am warned there is a problem with windows media center, restart my computer and try again. It did not work. Help

  I am running windows vista and am warned there is a problem with windows media center, restart my computer and try again. It did not work. Help

  Run the Setup again.

  Open WMC > tasks > settings > General > installation Windows Media Center > rerun the installation

  Does that help?

  If the above does not help then try to reset WMC: -.

  Open Control Panel > uninstall a program > turn Windows features on or off > scroll multimedia features > uncheck the box against Windows Media Center > follow the instructions on the screen > Reboot > open again to turn Windows features on or off in the control panel > scroll multimedia features > check the box against Windows Media Center.

  Now reconfigure WMC again

• I bought CS3 for mac G4 and when I transferred to my new mac g5, download programs, but I can't use an any of them because that a window opens and says enter serial No. No problem, I have a valid serial number, but when I enter it, a screen comes ups sayi

  I bought CS3 for mac G4 and when I transferred to my new mac g5, download programs, but I can't use an any of them because that a window opens and says enter serial No. No problem, I have a valid serial number, but when I enter it, a screen comes ups saying that the # is not valid. Can someone help me. [deleted]

  [personal information... [Mod - https://forums.adobe.com/docs/DOC-3731]

  [This is an open forum, not the Adobe support, please do not post personal information]

  [Duplicate message deleted... post the same question more than once is confusing... MOD]

  [This is an open forum, not a direct line to Adobe support... you have to wait a response]

  Error "serial number is not valid for this product". Creative Suite

  In addition, if you have El Capitan, click on the following link

  See answer #5 in https://forums.adobe.com/thread/1965850 for several solution links

  -the first link that the answer is a possible solution to install problems

• Satellite L450D: Windows 7 and Netgear connection problems

  Hello

  Ive recently bought a Toshiba Satellite L450D but I can't connect to a netgear wireless account...
  It works fine on another laptop and my toshiba can connect to an account of different eircom without problem...

  What is the new Windows 7, which is not compatible with the server or do I have another problem!

  Thank you! :)

  Hello

  What you mean with Netgear wireless account exactly? Do you mean the router Netgear WLAN?

  Normally, you can connect to each WLAN router. It makes no difference which manufacturing, you have the router but factory settings are different, this means that some routers have DHCP and static IP addresses, for example. I think you should check the TCP/IP configuration and update the WLAN driver.

  Check for an update WLAN Portal: http://aps2.toshiba-tro.de/wlan/

  Good luck! :)

• Windows 8 turns off WiFi on Toshiba Satellite a series

  Can someone please help? I installed windows 7 to windows 8 pro on a toshiba satellite A350, and I'm sure that all drivers are properly installed and updated, among which many course the wifi (Intel(r) wifi link 5100 AGN) device. all this perfectly, the first day, I improved the system, but the next day when I turned on the computer, the wifi was not working, knowing that the physical button is enabled in the settings of the wireless card is disabled, airplane mode is disabled.

  I tried to run the network troubleshooter and it shows: WiFi is disabled
  I tried also to update the NIC drivers, but I have the latest version installed (version of windows 7 is the only one available)
  and I checked this link http://windows.microsoft.com/en-US/windows/network-connection-problem-help#network-problems=windows-8&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
  and it does not at all-_-...
  any ideas pleaase?

  I solved my problem... and this is the solution...

  * Open regedit (start-search-regedit)
  Open the HKEY_LOCAL_MACHINE - SYSTEM - CurrentControlSet - services,
  Scroll down and open Ndisuio (double click). Open the "Start" key and change the value to low - 1. If the default 4 changes to 3, and the default value is 3 change to 2...
  * Close regedit and restart...
  It can be useful :)
   

• Cannot run windows applications 8 on my computer toshiba satellite laptop

  Hello

  I have a Toshiba satellite laptop and I recently installed windows 8 on.
  but when I try to run windows store applications such as mail, people, message the app is shown as it loads then it is hidden.
  so I can't run any application, it disappears immideatly and does not load.
  could you help me solve this problem.
  Thank you!

  Hi Benjamin,

  For the question links to applications, please try the following steps.

  Method 1:

  You can see the steps from the following link.

  What to do if you have problems with a soft

  Method 2:

  Please check if a proxy is enabled, if necessary, turn it off. Follow the steps below:

  (a) select the Internet Explorer tile on the start screen.

  (b) turn left click on the settings icon in the lower right.

  (c) select Show the desktop. You will be guided to desktop Internet Explorer.

  (d) select settings (speed) icon in the upper right.

  (e) select Internet Options in the menu drop-down.

  (f) go to the connection tab on LAN settings from the lower right of this window.

  (g) uncheck the box that says "use a proxy server for your LAN settings.

  Please post with the State of the question.

• Toshiba Satellite problem model # PS181L - T 03, 07, drive HARD and CD problem

  My friend has a toshiba satellite, I don't know if he has a problem of room, it starts on a diskette.

  The problem is that it cannot detect the CDROM and the HARD disk drive.

  What can be the solution to this, thank you.

  BTW, what is the way to reset the CMOS in parameter by default.

  Thank you.

  Hello

  I'm not sure of the solution to the problem, but you can enter the BIOS by pressing the ESC key when you feed the PC.

  BR

  Tom

• How to connect a Toshiba Satellite to HP 1200 printer

  HOW TO CONNECT HP PRINTER 1200, WHERE THE CORD GOES ON LAPTOP TOSHIBA SATELLITE

  I have the drivers updated, the default printer

  Your question is not clear, in the title

  If the printer has any connection usb cable can not install/connect, otherwise

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&DLC=en&docName=c01874725&LC=en

• Confused about Windows 7 and vRanger connection

  I pulled my PC of laboratory for testing of vRanger connection, but the client could never connect to the service. He has worked the last time I got it running. I checked and the services were running. Version = 7.0.2. Thinking that something went south with my lab pc I got a laptop with Windows 7 Pro 64-bit and 6 GB of RAM. I installed the same version of vRanger connection and after a qualified installation, I found myself with the same exact error - could not connect to the service. Then I read about vRanger connection plug and see that Windows 7 is not listed as an OS supported to install more. Is this correct? Should we use a server operating system to run vRanger connection?

  TIA

  First thing to check when you see a glorious "Could not connect to service", is to go to the Windows - Application and Services - vRanger connection newspaper Service event viewer and retrieve the last error. There could be a clue.

  Talk about your case, I guess that's a "feature", we met at Ranger 7.x.

  You MUST be logged in under the account that you use for care to ensure that the installation or upgrade was successful.

  If it was a facility clean, better delete everything, including SQL instance. Program directory Files\Dell\vRanger recheck if the files are actually deleted. You need to maybe restart the server and go through Control Panel once again to uninstall.

  Then log in to the zone with officials of department store and run executable.

  Another thing I noticed during the upgrade is if Ranger DB is attached to an instance of SQL 2005 'foreign', usually BackupExec. Logic of ranger fails completely and install utility keeps SQL Express 2005 (impossible to create a new instance), which does not work with Ranger 7.x.

  But it is a different story.

• 32-bit Windows 7 and error message shown on Satellite T series

  Assistance needed for this fake computer.

  I started to install 64-bit windows 7 then click on Cancel to halfway, after that I realized that maybe this might require too much RAM.
  Now get persistent error message (F3-F200-0002). What should I do? (need to explicit instructions as relatively inept)

  Hello
  If I understand correctly, you ' ve started to install windows 7 and then cancelled the installation. Now get persistent error message (F3-F200-0002). Just do a fresh install again.

• Have windows 8 and cannot connect my 710 Lumia

  I have upgraded to Windows 8, and although my Nokia Lumia 710 (Windows Phone 7.5) appears on the list of devices multimedia multi in printers and devices, but to try Media Player it only allows me to synchronize the device.

  Hi Tom,

  Thank you for visiting Microsoft Community.

  You get the error message? If Yes, what is the full and exact error message?

  I suggest you to refer to the article and see if it helps:

  Set up a device to sync in Windows Media Player

  http://Windows.Microsoft.com/en-in/Windows-8/set-up-device-sync-media-player

  Let us know if it helps.

  Thank you.

• Virus with Vista on a Toshiba Satellite problems

  I am running Vista Home Edition on a Toshiba Satellite. Apparently I was infected by a virus because Windows Security Essentials flashed messages on my screen about detected viruses and he tried to quarantine. Unfortunately, I get a message that says something about Windows encounters a critical error and will be shut down for a minute. Also, my computer does not seem to hold a charge (battery) suddenly and flashed a message on the power supply or battery manager having a problem. I started mode without failure, and while it may take a minute for the Windows message while meeting a critical error to appear, he appears again and then stops for a minute. I can't get the computer to stay long enough to do anything. I even tried to try and disable the automatic stops when Windows encounters a problem in the same Mode window safe mode (F8), but it will still disconnect me and close. I tried trying to get Microsoft Security Essentials to run a scan but the critical error that meets Windows continues to turn off the computer before it can go very far. I'm puzzled and not particularly compyter savy. There, can someone help me?

  Because it is a Toshiba product, I suggest that you ask them how to reinstall Vista.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Or try their Forums:

  http://forums.Toshiba.com/

  At Toshiba, we could buy a recovery disc but it will cost money; and you don't know if it will work.

  Or borrow a DVD of Microsoft Vista, don't buy Toshiba Recovery DVD.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Sound on toshiba satellite problem

  I have windows 7 toshiba satellite may

  whenever I listen to a music every few seconds just a few disturbances in a sound...
  I tried to install the new drivers, and that did not help
  I don't no what is the problem and I hope someone could help me

  construction problem
  :)))

  Control Panel, and then properties of speakers then 'Advanced' tab. This is a drop down menu where you can change "bit depth". By default as it the 16-bit value (CD-quality) and all I had to do was change in 24-bit (Studio quality) :)