Windows Xp and logitech webcam
When you try to install logitech C270 webcam it ask for service pack 3 cd it is already installed
When you try to install logitech C270 webcam it ask for service pack 3 cd it is already installed
It calls for the Windows XP SP3 or Windows XP CD * with * SP3 CD?
He clearly must replace some files of the original system with an installation CD.
Tags: Windows
Similar Questions
-
DV6565CA w / Windows 7 and the WebCam
Hi all
My girlfriend has the CA DV 6565 and I recently installed Windows 7 on it, and I don't know what files/software to download to be able to use the webcam. Ive tried Webcam HP software, but he says that there is no Webcam. Yet I see to look me in the face.
On a side note, in Device Manager, I have yet 2 system device Base that are not installed because they lack of drivers, but I don't know which ones they are.
Also on another note. Whenever I have lower the lid of the screen. The notice USB appears and tells peripheral USB it could run faster. So Im a little confused on that part. I just disabled it in the Device Manager, where it appears as an unknown device in the USB section
Any information would be helpful
Thank you very much
Matt
Solve the usb device and install these.
Ricoh 5 - 1 card reader driver here for 2 x base system device
CyberLink YouCam here
You have installed later Intel chipset here
-
HP Pavilion entertainment laptop upgraded to windows 7 and webcam is longer.
Laptop computer HP9925nr has been upgraded to Windows 7 and the Webcam is no longer find. Is disabled over Webcam because it is not compatiable with Windows 7? I updated the driver from the website, but says that the Webcam is not found.
Try to install the driver from the following link:
FTP://ftp.HP.com/pub/SoftPaq/sp45501-46000/sp45825.exe
If the problem persists, consult the document below for more troubleshooting:
-
I installed a logitech webcam on my computer and everytime I go to use it on windows messenger, MSN messenger stops and also I'm unaable to use yahoo messenger.
Hi LindaKeippel,
1. what operating system do you use?
2. what happens when you try to use yahoo messenger?Method 1
I suggest that you set the computer to the boot and try to use the Messenger. The following link will help you configure the computer to boot.How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Note: Put the computer into normal mode.
A. Click Start, right-click computer and then click on manage.If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
B. in the console tree, click Services and Applications and then click Services.
(C) in the part of details, right click of Windows Installer and then click Start.
Method 2
If the steps above fail, I suggest you to reinstall the drivers from the manufacturers Web site, the following link will help you to reinstall the drivers.Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctlyMethod 3
Once you reinstall the drivers, I suggest you run the windows updates again.
Install Windows updates
http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates -
I have windows 7 ultimate, my logitech webcam c110 does not have detected his help please
the webcam is found in devices and printers when I run the troubleshooter it says that hardware changes might not have been detected in the webcam is detected in the official website of logitech
Hello
1. don't you make changes on the computer before the show?
2. have you installed the drivers for the webcam from the CD or after they download from the Web site?Method 1:
Run the fix it and check.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-usMethod 2:
You can check the link for Logitech and check if the download and installation of the drivers help you-
http://Logitech-en-AMR.custhelp.com/app/answers/detail/A_ID/24408/~/downloading-the-latest-software-for-the-Logitech-Webcam-C110If the problem persists I suggest you try to download and install the drivers for Windows Vista compatibility mode to Vista in Windows 7 for the webcam and check-
You can check the link for assistance on compatibility mode - mentioned below
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-WindowsReference link:
http://www.Logitech.com/en-us/support/webcams/webcam-C110 -
Logitech Webcam preview window
Is there a live preview for webcam captures using Remote Scan on a server terminal server. My end-users are swearing up and down that they had a glimpse of lining up patients from a webcam capture in their EMR software. Remote scan is the capture of the image on a Logitech Webcam c210 using the Remote Scan Microsoft WDM driver. The Preview button is just take a picture not a live stream.
Until the user logs from Server RemoteScan RemoteScan customer using the virtual channel it will be a live stream preview. If the direct connection via IP, there is no flow.
If you have any questions please contact us at 406-721-0276.
-
I have laptop Toshiba and windows 7, but my webcam is not working it shows that the device is locked by another application. Help me please!
For a built-in webcam see this support from manufacturers or their forums.
You could I think trying a boot minimum http://support.microsoft.com/kb/929135 and see if its then OK
-
Webcam CNF7051 toshiba laptop; I installed windows 7 and webcam has never worked since.
I installed windows 7 and webcam has never worked since. What is the solution for this problem?
Hello
Since you upgraded to Windows 7 have you run Upgrade Advisor and verify with the
Compatibility Center (for the compatibility of the device)?Windows 7 Upgrade Advisor <-- please="" run="" this="">--> http://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx
Also check the Compatibility Center (for the compatibility of the device)?
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspxCheck with the system and peripheral manufacturers for updated drivers and many have special
instructions to help the upgrade to Windows 7. You should also check with the system
Machine to ask in their forums (if any) for known problems and solutions and support.Toshiba - Forums
http://laptopforums.Toshiba.com/Toshiba - Contacts
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contactToshiba - drivers - access your model
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadToshiba - Support
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp==============================================================
If the system is compatible Windows 7 AND there are drivers for your WebCam
(and other devices).
Vista references apply to Windows 7.
There is for Windows 7.Login as an administrator.
Control Panel - Device Manager - Imaging - write down of the brand and the model of camera - double
Click on it and on the tab of the driver is version. Now, click on update drivers (who cannot do anything
that MS is far behind the drivers of certification). The RIGHT CLICK on the camera - UNINSTALL-
REBOOT - it will refresh the driver stack.Now, go to the system manufacturer's website and download the latest driver of the camera and other partners
the camera software (if not more recent get the same).Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers to 7 (updated drivers manually using the methods above is)
to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html==============================================================
If there are no Windows 7 drivers:
You can try loading the latest driver available in Compatibility Mode which sometimes
work however, it isn't anywhere near a sure thing.Exhausted all other methods in the Troubleshoot utility above before trying these.
Logon as ADMINISTRATOR for all of them.
You can try Compatibility Mode but this rarely works on the device drivers.
Right click on the driver executable (.exe) file - select Compatibility Mode
In the drop-down menu choose XP or Vista and Service Pack (if it is the version
"you try the drivers).Click OK, and then let the race to see if it will install.
=================================================
It also rarely works on the device drivers but it is worth trying:
Another method to try is to run the .exe (if self extraction) or Unzip (if it is compressed) to a folder:
How to open a high in Windows 7 command prompt
http://www.SevenForums.com/tutorials/783-elevated-command-prompt.htmlOpen an elevated command prompt : (probably looks like this)
C:\Windows\System32 >
CD \the path to this folder as C:\User\Your user Name\Camera_Folder or something else
the path is the folder where the driver is unpacked.So in this case it would be \User\Your User Name\Camera_Folder CD and the prompt
look like:CD \User\Your user Name\Camera_Folder >
This in type at the prompt and press ENTER.
-I - one *.inf PnPUtil
It will take a little time to respond.
If it does not (error) use the full path to the driver, for example (which can be used
any guest):PnPUtil-i - one C:\User\Your user Name\Camera_Folder\*.inf
Still wait to see if it will install.
How to open a high in Windows 7 command prompt
http://www.SevenForums.com/tutorials/783-elevated-command-prompt.htmlThe PnPUtil command syntax
http://msdn.Microsoft.com/en-us/library/ff550423 (vs.85) .aspxPnPUtil.exe - operating instructions
https://www.faultwire.com/file_detail/PnPUtil.exe * 28200.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Impossible to uninstall Logitech Webcam Software
I have Windows XP sp3, IE8 and all updates. Except 3 Logitech webcam C615 updates that all 3 failed to install with the same error code 0 x 80070103. I have installed and uninstalled my software of Logitech C615, drivers and all a few times, hoping to redo the programwork. The program worked the first time I added it perfectly for almost a week, then without my knowledge at the time I had 3 virus severe threat (which I've taken care of via MSE) a week or so later when I discovered it. I don't know if this is related, but the screen would go black and dead when we tried to use the webcam, it does simply not at all. It's weird that on the same day I've updated these 3 updates failed was the day that I got the virus. So, I uninstalled the program overall, thinking the problem was the webcam and re-installed. It's the same thing, and Yes, the drivers were very good. I had yet to understand and fix the virus. So, I uninstalled it again. Still it wouldn't work. Then, viruses have been found and fixed. Now, here is my current problem. I'm trying to uninstall the Logitech Webcam Software C615 Ain Add/Remove Programs, and it will not uninstall! I '; worm tried and tried. Whenever a screen that is supposed to appear and ask you what parts you want to uninstall tries to ride, flashes briefly and then disappears, leaving me unable to uninstall. I tried the fix from Microsoft, but it without success. All parts of the program that I finally tried to do an unintall advanced disappeared (I think) except the software part. Help! Thank you! KinaPO
Hello
1. What is the full message of error/popup?
2 have what Microsoft Fixit you tried to solve the problem?
3 What problem confined to a specific program? You are able to uninstall other programs?
Looks like some third-party programs is blocking. This can also occur if the computer is still infected with a virus.
Method 1:
Solve problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/program_install_and_uninstall/
If you have already tried, you can proceed to the next method.
Method 2:
Put the computer in a State of boot is a way to know which application is causing this problem.
To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
Step 1: Follow the steps in the link below to do the same thing:
How to configure Windows XP to start in a "clean boot" State
Note: After troubleshooting, be sure to set the computer to start as usual as shown here:
Step 2: To configure Windows to use a Normal startup state
After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
a. Click Start and then click Run.
b. type msconfig and click OK. The System Configuration Utility dialog box appears.
c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.
d. When you are prompted, click on restart to restart the computer.
Method 3:
Run a scan antivirus on your computer.
www.Microsoft.com/Security/Scanner
Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.If the problem persists, you can report the issue in the Logitech forums for more information:
http://forums.Logitech.com/T5/webcams/BD-p/quickcam_software
Hope this information helps.
-
Blue screen with Logitech Webcam C500 under XP SP3
I have a logitech C200 webcam working OK and then he started to do "Blue screen" of Windows. I thought he might have a failure with the C200 camera, so I bought a new Logitech C500. I uninstalled the software for the C200. restarted the computer and follow the instructions to install the C500, including updating to the latest drivers available on the net. Problem is that the C500 is originally the same question. Immediately I plug the usb cable into the computer, the blue screen appears.
I suggest that contact you Logitech as show the specifications that the Logitech Webcam C500 is compatible with Windows 7, Windows Vista and Windows XP SP2 and later versions.
Troubleshooting for the Logitech webcam:
http://Logitech-en-AMR.custhelp.com/app/answers/list/section/Troubleshoot/session/L2F2LzEvc2lkL3BUVVVlN3VrIf it's blue screen again, get the blue screen error message because it will help you determine the cause.
In addition, blue screens (not all) are material usually associated drivers.I hope this helps.
Marilyn
-
HOW CAN I EMAIL A PHOTO OF LOGITECH WEBCAM
I have windows vista and I have a logitech webcam, I know how to take pictures, I don't know how to save an email and send pictures of the webcam.
I use an HP webcam. Maybe what I'm saying now will throw somelight to your question.
After the photos have been taken > start button > Search box, type webcam media, press ENTER> uac prompt > right click on the Webcam media folder in the next window, click OPEN > there are photos. I can highlight all, right click, click on MOVE TO > navigate to a folder of my choice > click MOVE.
Now, I can e-mail them the normal way.
t-4-2
-
Compatibility of Logitech Webcam
The Logitech Quickcam Webcam Chat list model No.: 961462-0403 as compatible Windows 7 64 bit. I don't see anywhere that Logitech would agree with you.
Logitech Webcam Software (LWS) with Vid 1.1 x 64 seems to work,
but Quickcam Chat Webcam
Model No.: 961462-0403
M/N V-UBQ42
n/p 860-000168 is not listed as compatible.
I believe that this model is sold at Wal-Mart!
Do you think you and Logitech can get on the same page?
ThanxHello Fedora,
You are 100% correct that Logitech Quickcam Chat Webcam is compatible with Win 7. Visit this link:
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?s=Logitech%20Quickcam%20Chat%20Webcam&OS=64-bit&type=hardwareYou can try it for yourself by installing it on your computer windows 7. If it is not detected or does not behave as it was supposed to include then don't panic.
Try to install the device in compatibility mode for Vista or XP with Service pack of your choice.
* Right click on the program executable (it ends with .exe), then click [Properties]
* Click the [compatibility] tab to open the abc32. EXE property sheet.
* Click on the [run this program in compatibility mode for:] box, and then select the operating system you want to invoke compatibility for the menu drop down.
* Click [apply] then [OK] to exit the property sheet.http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows
Good luck $
-
iHP G70-460us computer laptop and the webcam has just stopped working
I have a HP G70-460US laptop and the webcam has just stopped working. How to run again.
Hello
Please find the link given below might help you solve your problem.
-
Window 7 and Combat Flight Simulator
I have problems with Windows 7 and Combat Flight Simulator WWII Europe series. The game recognizes my Logitech Attack 3 game controller, but does not respond to all entries. On the settings tab, all the buttons work correctly and the game asks if I want to select the gamepad Logitech, sub show jibberish in the verbiage.
Have you checked Logitech to see if they have a new driver for Windows 7?
-
REFERENCE DELL GX60 SFF
OK hear goes: Windows Xp Home edition, ver.2002 was SP2. Celeron (R) CPU 2.4 GHz intel 2.39 GHz 512 MB RAM
OK you can stop laughing now. I know its out of date and I know that I will eventually improve windows (getting another computer at the moment), is
not an option. Now, my relic worked fine good healthy and not too fast, but it got me where I should go. Mainly to pay my bills, print them
play games, etc.; you get the idea. somehow, well I ended up losing several programs and not knowing what I was done, I decided to reinstall
Windows XP and also to install SP3 (bad decision!). I didn't know that my copy of resettlement was not installing many drivers, you had to put them
yourself! Needless to say, I fumbled my way through, but I can not all sounds, oh I get this 'static' loud and clear when I turn the speakers off voltage
but that's all. I've tried everything. Also, when I go into Device Manager and open sound, video and game controllers, it shows
Audio codecs, Legacy Audio Drivers, Legacy devices of video Capture, media control and Codecs video (whatever that means).
And when I opened the system devices, there is a yellow exclamation point in front: Intel (R) E75/25/E7520 DMA controller - 3594. (phew!).
Well, I hope I gave you enough info.cause, I'm not that knowledgeable about computer technology. (I'm sure it's obvious LOL) In any case
Sir/Maam are unwilling to detach "sexist". I'll let you go, hope you can give me help on this issue, if I could I would just get a new one
but I am living young 71 on S.S. Disibility and simply ends. Not complaining do not. I am blessed. You have a wonderful and blessed
day.
Sincerely yours
Mrs. Fannie M. OwensGo to your computer manufacturer's support web site and search for drivers of devices in Windows XP for your specific model number.
If there are Windows XP drivers, then download to a folder on your hard drive and install all, beginning with the card mother/chipset drivers, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.
List of computer manufacturer support sites:
http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturersIf you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problemsUpdated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyGraphics/video drivers:
Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-usJ W Stuart: http://www.pagestart.com
Maybe you are looking for
-
Removal of the BIOS on Satellite Pro M10
Hi all Just a quick question, havnt cast an eye at the moment, but no one knows if the bios chip can be removed easily from the motherboard M10 or it is welded? Thank you. :)
-
How to access the Recovery Console for "fixmbr" with Toshiba Recovery DVD?
Hello I searched but did not find all related messages, I start a new thread. I have to fix the MBR and normally you can do this via the recovery XP and then Console "fixmbr". As you may know Toshiba Recovery DVD know only in a sense - the way hard "
-
screensaver to go 10 minutes and in 15 to 20 minutes power options
-
Xperia dual Z5 - how to change ISO beyond 3200
I tried in the manual, both with a resolution of 8 to max, in settings ISO there no option to pass ISO 3200, y at - it a tip or taken to it?
-
I HIDE MY BREIFCASE AND I CAN NOT FIND NIT
HOW TO FIND HIDDEN LIKE MY BREIFCASE FILES