Windows XP and Windows 7 usb detection problem

Similar Questions

• Manager uninstalled drivers and now front usb detect device not

  try to use life cam nx6000. CD did not went to the downloaded driver to internet Manager. then found download microsoft. uninstalled the driver manager and now the usb port before are not detecting the camera or ipod nothing.

  I ran the SFC / scannow, that's where the problem was detected, but like I said I am as far as I can go

  Respond to this request on audio, video, and motherboard and continue with the rest of the instructions.  In other words - skip the SFC/scannow (although where you got the original, I'm not sure.)

  As for the SFC/scannow...  Have you read through this article?
  http://support.Microsoft.com/kb/929833

  In particular, the part that starts with:
  "To determine which files can be repaired by the System File Checker tool, follow these steps:

  and continues with:
  "If the System File Checker tool cannot repair a file, follow these steps:

• Bluetooth Windows 7 USB port problem

  Hello

  I use a bluetooth class 1 dongle (manufacturer unknown) with the V 8.00.03 Premium toshiba bluetooth stack and a bluetooth headset. The specifications for the dongle are: Bluetooth V1.2, compatible USB V1.2/2.0

  I have a strange problem when changing the USB dongle is plugged. If I change the dongle on another USB port, searching for devices fails. I tried to uninstall the battery and of course remove device from the bluetooth Manager window.

  Also, strangely, when I plug the dongle on a USB extension on the same port, it does not either. When I put the dongle into the same USB port it works fine as usual.

  I want to change the USB port so that I can get the best reception, like its plugged in to the back at the moment. Also, I want to use the usb expansion for the same reason, to bring out above the office. Oddly, if, as I say, it does not work with the extension (just a regular cable with USB male on one end and female on the other to plug the dongle in.)

  Is this something to do with voltage drop down a cable? And regarding the change of the ports usb is it something to do with ports being installed on this USB port bluetooth only? I don't know exactly how ports bluetooth works, how they settle etc.

  Thanks much for any help.

  Hello

  > Also, strangely, when I plug the dongle on a USB extension on the same port, it does not either. When I put the dongle into the same USB port it works fine as usual.

  I think you're wrong here buddy
  If you use another manufacturer's computer, and if you have problems using it, you should check the page of computer manufacturing support.

  In my opinion the question isn t linked to Toshiba BT stack but to the USB ports on your computer.

• Tool for creating media, Windows Bootable USB key problem

  Hey, when using of media creation tool to download and make N 8.1 Windows Bootable on my 64 GB Kingston, USB 3.0, the process gets all the way to the end before failing and say "sorry, something happened and we could not finish creating the flash drive in the drive I got access denied." So my question is; Why won't it work?

  Use the multimedia creation tool to download and save the .iso image file. Do not use it to make the USB. This prevents you wasting time downloading Windows 8.1 and then having to redownload as the tool does the USB incorrectly. Rufus makes the Bootable USB key. Its best to use a 8-32 GB USB flash drive and FAT32 format (64 GB will be truncated to 32 GB for FAT32).

  If you install in the UEFI with SecureBoot (new Security Technologies - made systems in 2012 or later systems in 2010-2011 may also have the UEFI BIOS with the latest BIOS update but the settings must be enabled) use the "GPT partition for UEFI computer scheme." Be sure to format it in FAT32 or the USB Flash drive will not start.

  If you install in a legacy systems BIOS for systems without a UEFI BIOS, then use the "partition MBR BIOS laptop scheme." Its also recommended to format the Flash drive to FAT32 but not necessary for a Legacy BIOS.

  See here where I demonstrate the procedure:

  http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/download-Windows-8-1-retail-and-OEM-ISO/

• Tecra M11-134 - Windows 7 USB ports problems

  I have three USB ports, that which is a SATA port.

  SATA port stopped working earlier, but I reinstalled it, after what it worked again.

  One of the USB ports however stopped working earlier, and am now unsure as to if this particular port doesn't show even in Device Manager (I see two entries "Generic USB Hubs", two "USB host controllers", a "USB unit (composed)" and two "USB root hubs"), but who is refers to the regular USB ports and that the SATA port?

  One of these entries in the USB port which does not or does not show this port?

  In any case, I can't get one of the ports to work even after reinstalling all USB ports.
  Can anyone help?

  I hope that someone with the same machine will describe the own experience with this, but what I want to know is follow:
  Have you tried to reinstall original Win7 32-bit professional and test functionality with the factory settings?
  >... even after reinstalling all USB ports
  Out of curiosity, but how you did it? Have you reinstalled the chipset driver?

• __Vista and external hard USB drive problems. __

  I have an old USB Maxtor attached an external hard drive with vista home premium.  It was working fine until I left for two weeks.  Now, vista starts up with this drive connected.  When I unplug the USB connection, it starts OK.    Second, but related.  I use this drive to Flash the pictures on the box of the gadget.  Works OK for a bit, then the photos appear more.  I redefine the source folder to make it work again.  The two problems are related to the external hard drive.  Is it vista, usb or drive?

  Any help would be appreciated.

  Vinnie

  Hi Vinnie,

  I suggest you try the following steps to refine the question:

  Step 1: connect the USB device to a different USB port and test it.

  When a device is not functioning, Device Manager also typically displays an error message with an error code that comes with it. First, search for errors in the Manager of devices to do this, follow the steps below:

  Step 2: Disconnect the USB device, then on startup, check for the error code in Device Manager

  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, look for the USB device, and then double-click the device name.
  3. under the gaze of general tab for the status of the device for any error code indicated.

  Get-help-with-Device-Manager-errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors

  Step 3: Disconnect the USB device and start, run the fixit provided in the link below at the office level.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Thank you, and in what concerns:
  Ajay K
  Microsoft Answers Support Engineer

  --------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install network printer on Windows 7. Detects the printer then it says cannot locate the driver. All my vista and XP machines have no problem finding drivers. It is a 32-bit 64-bit vs questions? How can I fix it?

  Cannot install network printer on Windows 7.  Detects the printer then it says cannot locate the driver.  All my vista and XP machines have no problem finding drivers. It is a 32-bit 64-bit vs questions?  How can I fix it?
  Windows Server 2008 network.  Printers have ip addresses. Install the drivers from the Print Manager.  /Terminal Server Workgroup installation.

  It's the same situation with XP.  The print driver names must match.  If you notice the name of the printer driver that uses XP is a name different from the one that is installed when you plug in the device on the Windows 7 computer.  This is just my assumption, please correct me if this isn't the case.

  The real solution is to install a 32-bit driver on the XP machine that uses the same name that the 64-bit driver and share a printer using this driver or find a 64-bit driver that uses the same name as the 32-bit driver installed on XP and install the driver on XP.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• My games freeze and I have to refresh the page, windows network detects problems with pakage 1.0

  Windows network diagnostics detects connectivity with windows version 1.0 package! IAM helpless! My games freeze and I have to keep refreshing page and its helppppppp frustrating!

  Hello

  Thanks for asking!

  1. what game are you talking about?

  2. are - what you're talking to online games?

  3 have there been recent changes to the system before the show?

  If you are referring to online games, I suggest to follow the link and follow the steps. Check if it helps.

  The problems of games online using Internet Explorer

  http://support.Microsoft.com/kb/2528246

  Reply back with the results. I'd be happy to help you.

• Window vista xps 420 problem with USB ports.

  I have problems with window vista dell xps 420 machine, all USB ports are not recognized, unless the computer is restarted or rebooted. anyone has a suggestion.

  Hi Miguelsmith,

  1. When did you start to question?

  2. you remember to make changes to the computer recently?

  You can uninstall and reinstall all USB device manager entries and check if it helps.

  a. Click Start and typedevmgmt.msc and then click OK. Device Manager opens.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  f. check the USB device to see if it works

  You can also consult the following article:

  Tips for solving problems of USB devices

  Hope this information is useful.

• Windows 7 USB Flash drive - if I click on Scan and difficulty after you insert the disk, it erases my files

  Original title: Windows 7 USB/Flash drive problems

  In Windows 7, if I plug in my USB drive, the message box appears titled ' do you want to scan and difficulty of removable disk (e :))?»  If I click on Scan and Fix, he deletes my files (or so I thought).  I hope that the files are still there and I have simply can't see because the drive is FAT32 and not NTFS (it says that most of the drive is NOT of free space, so I assume that the files are still there).  What should I do to see / access files?

  Note: A reader, I never selected "Scan and repair"... so I can still see/access files.
  On the other drive, however, the first time I plugged it on Windows 7, I clicked Scan and Fix and it erased all the files on this drive (I guess).  This of course got me very angry.

  Hi MichaelGramm,

  It seems that the file format has been corrupted. You might consider formatting the drive in NTFS file system and check if this solves the problem. For Windows 7, the best choice for hard disks is NTFS.

  Note: Make sure that you back up the data before formatting the disk.

  See these articles for more information on formatting disks and flash player:

  Create and format a hard disk partition

  http://Windows.Microsoft.com/en-us/Windows7/create-and-format-a-hard-disk-partition

   

  Formatting disks and drives: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/formatting-disks-and-drives-frequently-asked-questions

   

  Caution:

  Formatting erases all existing files on a flash drive. If you format a flash disk that has files on it, the files will be deleted.

  Hope this information helps.

• B1H40EA #UUW: cannot install Windows 10 USB and Windows 7 online

  Presario CQ57-400SO.

  I can't install Windows 10 from both usb and online.i once finished the installation process of void and he returned my system to the old program Windows 7

  Oh I managed to download Windows 10via usb, I think that I never had a driver hp support? Updates

• The sign '+' opens NEW TAB stopped working. I have to open a new window each time. I tried to uninstall firefox and install again but the problem persists. Someone guide me on this.

  The sign '+' opens NEW TAB stopped working suddenly. I have to open a new window each time. I tried to uninstall firefox and install again but the problem persists. Someone guide me on this.

  Your agent uisr string is "Mozilla/5.0 (Windows;" U; Windows NT 5.1; en-US; (RV:1.9.2.15) gecko/20110303 AskTbMPC2/3.11.0.15286 Firefox/3.6.15 ', the part of AskTbMPC2 shows you have the toolbar installed Ask. Some third-party programs will add the Ask toolbar.

• Diagnostics Windows network, the error reads 'Problem with wireless adapter or access point' and fails to solve the problem.

  «Problem with access point or wireless adapter»

  Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, Maria

  HI Maria,

  ·         What operating system is installed on your computer?

  ·         You have installed the latest drivers for wireless network card?

  Follow the suggestions below for a possible solution:

  Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: See these articles for solve wireless problems:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if that helps.

• I have install fallout 3 and the last update (1.7), but when starting a new game, he tell me that windows is having a problem reading it & then it locksup.

  original title: game Fallout 3 on Windows 7 problem

  I have install fallout 3 and the last update (1.7), but when starting a new game, he tell me that windows is having a problem reading it & then it locksup, I have a Toshiba Satellite, Fallout New Vegas works perfectly on my laptop, how can I play Fallout 3, is here to play Fallout 3 on windows 7.

  Hello

  You can see the link provided. It gives information that Fallout 3 is not compatible with Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=fallout%203%20

  Windows 7 Compatibility Center: Fallout 3 http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=%20Fallout%203&OS=32-bit

  You may need to contact the manufacturer of game for support

• After installing something from windows update my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turn off.

  Hello

  After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
  Then a window pops up saying "Startup Repair cannot repair this computer automatically.
  The details of the problem say;
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
  Signature of the 04:65537 problem
  Signature of the problem 05: unknown
  Signature of the 06 problem: BadDisk
  Signature of the 09 problem: unknown
  Signature of the 10:1168 problem

  System Restore does nothing, and all the other tools of recovery. :(

  Please help, it will be much apreciated :)
  DOM

  If you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.  MS - MVP - Elephant Boy computers - don't panic!