Windows XP can't see shared files and folders on the system Windows 7 Home Premium 64-bit
I have a wireless home network. When I got Windows 7 Home premium 32-bit on my desk - my XP laptop was able to share files and folders.
Thanks for your help - but I just found out the problem. In the advanced sharing settings, I forgot to select Enable turn off password protected sharing. The second I chose no-all the files and folders that I set to share on the Windows 7 system became available.
Tags: Windows
Similar Questions
-
audio and video synchronization on a file in the library media player Windows 7 Home Premium 64-bit
How can I synchronize audio and video on a file in the library media player Windows 7 Home Premium 64-bit
video play about a second faster than the audio, the download is good, cause it works on another computer on a flash drive...How can I synchronize audio and video on a file in the library media player Windows 7 Home Premium 64-bit
video play about a second faster than the audio, the download is good, cause it works on another computer on a flash drive...Set up a device to sync in Windows Media Player
-
Why can not download and install updates from Windows Vista Home Premium 32 bit?
Why can not download and install updates from Windows Vista Home Premium 32 bit?
Premium Vista Dell is actually not even install vista SP1, therefore, no update. In case of doubt, go to run, or cmd, type:
WinVer the OS details appear. If no SP1, download & install it
https://TechNet.Microsoft.com/en-us/library/cc749419 (v = ws.10) .aspx
Use this link for download.
http://catalog.update.Microsoft.com/v7/site/search.aspx?q=Windows%20Vista
This link allows you to get updates from vista through the windows update catalog, once running, search the installation 'Active X'
Microsoft.
-
need an iso file to install windows for windows vista Home premium 32-bit
I have a product key, but need Windows vista Home Premium (32 bit) ISO because I lost the part recovery partition
Hello
There is no Windows Vista downloads available from Microsoft.
You can contact your computer manufacturer and ask them to send you a set of recovery disks.
They should do this for a small fee.
To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:
You need to change the Boot order to make the DVD/CD drive 1st in the boot order:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon
-
I have Windows Vista Home Premium 32 bit and I get this pop windows window advising me "TCP/IP Ping command has stopped working". I click on "check online for a solution", but there is no charge and disappear. I still have the problem, and it's very irritating. How can I remedy outside junking my Tower and buy another? Thanks for any help on this.
Hello
1 did you change on your computer before this problem?
2. when exactly you receive error message?
You can follow the methods and see if it helps.
Method 1
Use the PING command to verify that TCP/IP is working properly. To do this, ping the loopback address (127.0.0.1) by typing the following command at a command prompt:
(a) click Start .
(b) in the search box type command prompt.
(c) right-click and select run as administrator of .
(d) type ping 127.0.0.1 and ENTRY.
If you receive the response of 127.0.0.1, it means that TCP/IP is configured correctly.Method 2
Check to see if the problem exists in safe mode with network.Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeMethod 3:
Alternatively, you can try to reset TCP/IP and then check if it helps:
How to reset the Protocol Internet (TCP/IP)
http://support.Microsoft.com/kb/299357Method 4:
I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
-
Why my files and folders on the desktop goes away when I stop or disconnect my computer?
Why my files and folders on the desktop goes away when I stop or disconnect my computer?
When I start my computer its message of shows like temporary file is retained and watch the preparing your desktop... can anyone find the answer?
· Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Read this: http://support.Microsoft.com/kb/947242
A temporary profile is loaded after you connect to a Windows Vista-based system
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
Difficulty of a corrupted user profile
After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
See you soon.
Mick Murphy - Microsoft partner
-
I am running windows 7 Home premium 64 bit on my laptop. I have a disc of windows 7 ultimate 32 bit, is it possible to upgrade to the ultimate disk, if so, how, if not how do I use the ultimate disc? Thank you very much, Mark.
No, you can't, but if its Windows 7 Ultimate you want, simply use the Windows 7 Ultimate product key to upgrade Windows 7 Home Premium to Windows 7 Ultimate using Anytime Upgrade.
If the license for Windows 7 Ultimate, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Home Premium to Windows 7 Ultimate. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Ultimate edition at the request, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Ultimate files the stored settings and programs.
Cases of failure to upgrade Express:
Windows 7 Anytime Upgrade fails:
If your getting the following: error: Windows Anytime Upgrade failed
This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
See: http://support.microsoft.com/kb/2660811= Other reasons and possible corrections.
Windows Anytime Upgrade fails with the error:
"every time that the upgrade has failed. Go online to solve the problem.
http://support.Microsoft.com/kb/2658652If Anytime Upgrade still does not work:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade -
I have a license key for windows 7 home premium 64-bit on a renovated Gateway PC I bought.
I recently had to replace the motherboard and now have to reinstall the operating system.How can I get a replacement operating system? All I see is where I have to pay to download another.Thank youDownload the Windows 7 ISO Image
Windows 7 Edition Home Premium x 64 (64-bit)English: http://msft-dnl.digitalrivercontent.net/msvista/pub/X15-65733/X15-65733.iso
ImgBurn - supporting the creation of CD more. ISO files,
It supports a wide range of image file formats, and it's free.
(BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
http://www.ImgBurn.com/http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn
Download and install burn ISO Gear (free):
http://www.GearSoftware.com/gear-ISO-burn.phpNote: Use always slower burning (4 x or 2 x) speed is offered a choice.
You may need to reactivate by phone:
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system? Earlier when checking for updates it had compatibility problems. These issues have been resolved for me operation secure with Firefox 4.0?
According to the guru on the ZoneAlarm user forum, Firefox 4 and other new browsers won't be compatible with the new version of ZoneAlarm, releasing. See:
"You must update the following plugin:
- Adobe PDF plugin for Firefox and Netscape 8.2.6
- Check your plugin versions on one of the following links:
- http://www.Mozilla.com/en-us/pluginCheck/
- https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
- Note: plugin check page lacks information about all versions of the plugin
- Update of Adobe Reader (PDF plugin):
- Within your existing Adobe (If you have already installed) drive:
- Open the Adobe Reader program in your list of programs
- Click Help > check for updates
- Follow the instructions to update
- If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
- Download the full installer (If you have NOT installed Adobe Reader):
- SAVE the installer to your hard drive (save to your desktop so that you can find it after downloading). Exit/close Firefox. Run the Setup program that you have just downloaded.
- Use one of the links below:
- https://support.Mozilla.com/en-us/KB/using+the+Adobe+Reader+plugin+with+Firefox (click on "Install and update of Adobe Reader")
- See also the download link': http://get.adobe.com/reader/otherversions/
- After installation, launch Firefox and recheck your version.
- Within your existing Adobe (If you have already installed) drive:
-
Old devices connect to computers with Windows 7 home premium 64-bit.
Hi Eventers,
Thank you for visiting Microsoft Answers.
Access the link mentioned to check if your hardware is compatible with Windows7 below:
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
You can also download and run the Windows 7 Upgrade Advisor to see if your computer is ready for Windows 7. It scans your hardware, devices, programs for known compatibility issues installed, you gives advice on how to fix any problems found and recommends what to do before upgrade you.
Visit this link to download the Windows Upgrade Advisor:
Kind regards
Amal-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Can I upgrade to windows vista home Premium 32 bit on 64-bit operating system
Im running windows 7 Home premium on opus 64-bit system. Can I upgrade to windows vista Home premium 32-bit...
Hello
This is not an upgrade from Windows 7 to Vista.
It is a downgrade that Vista is the previous operating system before Windows 7 came out and you would have to BUY a COMPLETE of Vista version and do a fresh install of Vista; but before you buy Vista, check first that your computer manufacturer provides the Vista drivers for your model computer.
Microsoft sells more Vista; Try Amazon.com.
See you soon.
-
I have AutoCAD 2002, a 32-bit program, I can't install it on my computer which has Windows Vista Home - Premium 64 bit OS.
Can someone help me, please?Hi JohnMcLarnon,
Welcome to the community Microsoft and thanks for posting the question.
According to the description, it looks like you can not install AutoCAD 2002, he would be grateful if you can answer this question in order to help you further.
1. what happens when you try to install, summers - get you any error message or error code?
2 is the issue limited only during installation AutoCAD?
3. have you made changes on the computer before this problem?
I suggest you to see the steps in the following Microsoft article and check if it helps.
Solve problems with programs that cannot be installed or uninstalled: http://support.microsoft.com/mats/Program_Install_and_Uninstall?wa=wsignin1.0
Troubleshoot installing or uninstalling programs: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-installing-or-uninstalling-programs
Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry
If you have any other questions or you need Windows guru, do not hesitate to post your questions and we will be happy to help you.
-
If I have windows vista Home Premium 32 bit genuien instalation in my laptop after how I can to update or upgrade in Windows Vista Home Premium 64-bit
If I install windows vista Home premium genuine in my laptop after how I can to update or update 64-bit of Windows Vista Home premium 32 bit
If I install windows vista Home premium genuine in my laptop after how I can to update or update 64-bit of Windows Vista Home premium 32 bit
Hello
You are unable to update or upgrade Vista 32 bit to 64 bit of Vista.
32-bit to 64-bit, or 64 bit to 32 bit is done by a new installation using a full version of the operating system.
32-bit and 64-bit are different operating systems.
See you soon.
-
You can use a Windows Vista Home Premium 64-bit OEM license to reinstall a retail copy?
Hello.
I currently have a HP machine with licensed Windows Vista Home Premium 64-bit. I intend to back up, format and perform a new Installation.I do have a HP OEM DvD and I wonder if I can use Vista Home Premium 64 - bit RETAIL COPY my sister to reinstall my machine.Basically, is it possible to OEM license for use on a DvD at retail?Thank you very muchDonnHello
You can also use this method.
You do not have a Vista disc that came with the computer to reinstall with, you should have a recovery Partition to do.
Here is the HP Compaq information on how to use the recovery partition to put your computer in a new State.
You press F11 at startup or through their Recovery Manager.
It is all explained in this link.
http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703
See you soon.
PS You can also make your own this recovery Partition recovery disks.
-
Lack of files and folders on the desktop
I stored a lot of files and folders on the desktop. These files are gone and I can't find them. I tried a system restore based on a time of restoration of this morning and the computer works well. However, the files and folders on the desktop are not returned. THING STRANGE, WHEN I REBOOT THE COMPUTER FOR A FRACTION OF A SECOND I SEE ALL THE FOLDERS AND FILES MISSING AND THEN THEY DISAPPEAR.
Recently where I found a number of files and folders under my user name. You always know the names of file and folder, try to do a search, they could be lot in one place. There are a few programs that automatically move files and predefined folders in folders like "DropIt". Also try to scan your computer for viruses.
Maybe you are looking for
-
Error message trying to update Windows xp sp3
I just do a fresh install of windows Xp sp3 replacement, that I got from Microsoft. I tried to update to windows, as I do when I reinstall windows and got the error message "the site has encountered a problem and cannot display the page you are tryin
-
S7 392 error code win 10 8007025D
Hi all Tried the upgrade to win 10. Did not work - then it stopped working. No problem, I thought, I'll do a clean install. That did not work. Error result code D 8007025 and stopped at 19% to the installation of the USB. I tried eRecovery, did not w
-
Normally, that would be a question of remote server, but all withdrew on the server. What I would try is to uninstall and reinstall the remote desktop connection and leave from groud zero. I am running Windows Vista. How can I do this? Thank youV
-
What is a virtual product?
Okay, I know maybe stupid question though... I have dots in the app store. In my manage products these items are listed in the "release" "for sale" - I know that the elements are on the rise and work and people are downloading them - not my articles
-
Microsoft wireless mouse stopped after 6 months of work: happened twice in two days
Windows 7 x 64. I've had the system for 6 months. Yesterday did this problem start happening. The Microsoft wireless mouse pointer freezes in the middle of the screen (but my wireless keyboard IOGear, that I had also six months, still works fine and