Windows XP closed shut and restart do not meet demand. It has only happened since 01/01/2012. Why?

Similar Questions

• Windows Explorer Ramdomly stops and restarts.

  Whenever I'm reviewing my files, be it on the C or D drive, windows Explorer randomly crashes and restarts, happened for a while now and I have no idea what causes it. However I noticed that happen when navigation control panel or searching for a file/location, for example, when I'm looking for a file to attach to an e-mail or by selecting a destination for the download of a file. It is really annoying because sometimes I have to move and copy files and Windows Explorer just throws me and I will once again to the location of the folder. I tried in safe mode, it happens again, but in fact it does not restart, it just closes and I have to open it again through Manager tasks, often crashing the Manager of the tasks, all in safe mode. I also tried the clean boot and continues to be, and sfc/scannow told me that corrupted files have been found but unable to fix, and I have no idea how to proceed.

  (1) run chkdsk as follows:

  A prompt by right clicking and select "Run as Administrator"
  and then at the command prompt, type: chkdsk /f r, then press the Enter key.

  If you are asked to plan the volume to check the next time that the system/PC reboots,
  Enter: y

  Now, restart the PC.

  Keep an eye on the screen and watch to see if errors are reported.

  If you know the manufacturing of your hard drive you can also download their diagnostic software.

  Another use: SpeedFan has an online health analysis function
  (SMART tab) for hard drives. It will show how your disks
  compared with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php
  Note: Unfortunately now includes a lot of bloat-ware, be very careful when installing remove bloat-ware.

  ===============================================================

  (2) run the command SFC /SCANNOW.

  This will check and repair if necessary all of the critical Windows system files.

  Click on start / all programs/accessories then
  Right-click on the command prompt option and select "Run as Administrator".
  (or "Safe Mode" open a command prompt)
  At the command prompt, enter: SFC/scannow

  Windows 7 - order SCANNOW SFC - System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
  http://support.Microsoft.com/kb/928228

  J W Stuart: http://www.pagestart.com

• When I try to delete anything out of my windows mail Inbox stops and restarts the imedietly.

  Restart mail Windowas

  When I try to delete anything out of my windows mail Inbox stops and restarts the imedietly.

  Try to compact and repair the database (see www.oehelp.com/WMUtil/).  There is likely an inconsistency between what is really there and what think the database is where and who must reconcile the two.  So beware of interference from antivirus software which can cause these issues (see www.oehelp.com/OETips.aspx#3).

  Steve

• Windows Live Mail freezes and goes to not responding not to when you try to print an e-mail message

  Windows Live Mail freezes and goes to not responding not to when you try to print an e-mail message. I t comes up with unicode UTF-8

  It print a page of test very well and also printed from Notepad and word fine

  Scott

  Hi Scott,.

  (1) if it works well before?

  (2) remember to make changes to the computer before this problem?

  (3) what is the complete error message you receive?

  Method1: The computer in the boot and a test to see if you can print

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists, you can post your query on the Windows Live Forums for more expert help

  Windows Live Forum -http://windowslivehelp.com/

  Thanks and greetings

  Ajay K
  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cloud to adobe InDesign download fails with shoing error it can not extract the files in the temporary file.  I tried several times and restarted does not.  What can I do about it?

  Cloud to adobe InDesign download fails with shoing error it can not extract the files in the temporary file.  I tried several times and restarted does not.  What can I do about it?

  To refer to EX11 some:

  Creative cloud (WIP) error codes | Error postal codes of Mylenium

  Mylenium

• problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

  problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

  Hi amcop4591,

  1. How is - that Mount you the drive on the computer?

  2 Di you use any third-party tool to mount the drive?

  I suggest that you remove the external drive using the disk management and check back later if you can change the permissions on the drive.

  If you change the permissions, make changes to the permissions on the drive and then mount the drive.

  Mount or dismount a drive

  http://Windows.Microsoft.com/en-us/Windows7/mount-or-dismount-a-drive

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• the cursor is jerky and plans for 2004 flight simulator do not run smooth. This only happens when you run games. Is there a solution?

  The cursor is jerky and plans for 2004 flight simulator do not run smooth. This only happens when you run games. Is there a solution?

  Hello

  · What is the number and model of the mouse?

  · Will there be any changes made on the computer before the show?

  You can follow the steps listed in the link below: how to solve the pointer display problems mouse in Microsoft games: http://support.microsoft.com/kb/309703

• My computer starts and I get the Windows startup screen, then my screen goes black and the computer is frozen I guess. Stopping and restarting do not work.

  I get to the black screen with the Windows XP logo and the bar of the State, and instead of my forthcoming accounts page, the screen goes black and nothing else happens. I tried the power off to reset and restart, and I can't perform a recovery of the system with the CD.

  Hi cgrosenick,

  -What software changes you did on the computer before the show?

  Follow these steps:

  Method 1:

  Start your computer in last known good configuration mode.

  For instructions, see How to start your computer by using the last good Configuration in Windows XP functionality

   

  Method 2:

   

  Follow the steps in this article:

  Computer stops responding with a black screen when you start Windows XP

• Updates the window appear when shutting down, but do not set up the next time you start

  The display shows 15 updates of Windows are loaded (installed?) when the machine is stopped.  To restart Windows, the screen indicates "wait" while the updates are being configured.  The icon indicates that the configuration is current, but the screen always said that "0% are completed.  Then, after a few minutes, the screen indicates something as "installation failed; Revenant.  After the message 'return', the machine moves to the usual Windows 7 start page and asking to connect you as usual (which allows me to work on the machine).   So, the next time I shut down Windows, the screen indicates that the installation of several updates continues and is completed in series.  Then, the next time I turn on the machine it asks to wait while updates are configured;  and finally, it "fails to complete the configuration" and "resets" as described above.  What happened several times in the last two days.  What should I do to get this resolved failure?

  Hi BonnieDoon,

  1. did you of recent changes on the computer?

  2. you receive error message during the update by installing the process?

  Method 1

  See the Microsoft article below as well as try the steps mentioned and check if it works.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  Method 2

  Restart the computer after you follow the steps above and check if the problem persists, if the problem persists then checks the update is not being properly installed on the computer and then install it manually.

  View update history to know which update is not installing.

  (a) open Windows Update by clicking Start , all programsand then click Windows Update.

  (b) in the left pane, click view update history.

  (c) to view more information about an update, double-click it.

  Once you know the update's KB number then visit the Microsoft Download and put the number in the search box, download and install the update manually.

  http://www.Microsoft.com/downloads/en/default.aspx

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I get the computer to stop unless turned off when stopping and restarting will not work?

  I now have to turn off the power switch of the computer to shut it down, and it does not restart at the request.

  Turn of the automatic restart in case of error and then report the error message you get on the blue screen.

  http://support.Microsoft.com/kb/320299

  And download BlueScreenView http://www.nirsoft.net/utils/blue_screen_view.html
  Unzip the file and run it.

  See SpiritX responses in this thread: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system/how-to-analyze-a-crash-dump-to-determine-root/ef9b9570-c852-e011-8dfc-68b599b31bf5?msgId=eba60431-c952-e011-8dfc-68b599b31bf5

  You can also copy/paste the content of the most recent minidump in an answer here.

• Windows explorer.exe stops and restarts allot

  I use windows vista 32 bit home premium service pack one. I would like to know if there are any solutions for my problem by blocking windows explorer.exe dive down and reboot... I scanned the computer with macffe and test a hard drive and it says its fine but I still get the error what can that do?

  Hello

  Treat him as a bluescreen to start with - check the event viewer and use the tool Nirsoft below to see if it
  are the error codes. Do the SFC and CheckDisk drivers check. Next message will be a few methods for
  check startup programs and however they must be made to ensure that they are not the cause of service or
  contribute to the problem. Even if Eventviewer or points of Nirsoft tool you still have somewhere to CFS,
  CheckDisk and drivers.

  Look in the Event Viewer to see if something is reported on these reboots.

  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows 7 - USB keyboard and mouse do not work once Windows starts

  The following happens occasionally:

  The keyboard works perfectly in the BIOS, the post OFFICE and when the Windows 7/64 Ultimate starts (I can tell the [Numlock] led shines). But when you see the Windows login screen, both, USB keyboard, USB mouse and stop working.

  I can say this from the [Numlock] LEDS go off and, mouse and keyboard, does not.

  There is no discernible specific deadline. Even wait minutes does not get the mouse or the keyboard back from work. In this case, the only way to get both mouse and keyboard, back from work is to reset the machine.

  I noticed this strange behavior with several keyboards, mice and different motherboards. So, it doesn't seem to be a problem related to a particular device.

  Independent since I also noticed the following:

  • I am currently using a card mother GIGABYTE Z68XP-UD3-iSSD. If I activate XDR (caching system with the small SSD disk) then Windows 7 starts up very quickly but keyboard and mouse get disabled for about 5 seconds when the login screen appears.
    .
  • During the installation of Windows, the keyboard rarely has not activate during the POST at all.

  I noticed that several people share the same problem. Is this an inherent problem USB HID? Or is there a bug in Windows that should be fixed?

  Hello

  This might be a question of power, where Windows is shutting off the power to your USB ports. Try this:

  Open the Device Manager
  Click on the tree "Universal Serial Bus".
  For each "USB root hub" do the following-
  Right-click on 'USB hub root'
  Select Properties
  Click the power management tab
  Make sure that the box "Allow the computer to turn this device to save power" is NOT checked.

  Try restarting now. If all goes well, that will take care of the issue.

• (Bootcamp) Windows 10 becomes black and restarts on bootcamp

  After installation of Windows 10 on bootcamp and navigation just normally as any other people would, after 10-15 minutes my screen suddenly goes black and restarts...

  While it has been restarted, blue "windows" sautéed as usual and points to bicycle in a circle turns on for a few seconds and then it crashes, restarts again...

  At this point I keep restarting and then it comes to auto repair, that I then used Safe Mode to get in which worked but I could not do much with it because she persisted again after the reboot.

  Side note: I reinstalled windows bootcamp 10 a bunch of time trying to solve every single problem, why it worked... even searching it up on top of google... Still no hope...

  Help, please!

  Data sheet:

  iMac (21.5 inch, at the end of 2013)

  Intel Core i5 at 2.7 GHz

  8 GB 1600 MHz DDR3

  Macintosh HD

  Intel Pro Iris 1536 MB

  El Capitan 10.11.5 running (15F34)

  Thank you

  Please see 10 crashing Windows, but don't know why. The question is usually associated with Windows Installer an invalid Intel GPU driver.

• Updates to security for Windows XP KB2685939, KB2709162 and KB2707511 do not settle

  June 12, 2012, a group of 8 high priority updates were presented for installation.  Four installed, but four others repeatedly failed to install. Two of them, then repeatedly appear under the icon "Automatic updates" in the taskbar.  When the "Express" or "Custom" install is selected, my machine restarts immediately, but fails again to install updates.  Lost a full day to use my system chasing this problem so far.  Can you advise how to get the updates to install correctly?

  (1) security Update for Windows XP (KB2707511) - download fails.

  (2) cumulative Security Update for Internet Explorer 8 for Windows XP (KB2699988) - appears to download, but the installation fails.
  (3) security Update for Windows XP (KB2709162) - download fails.
  (4) security Update for Windows XP (KB2685939) - appears to download, but the installation fails.
   
  Each returns the same error 0x8007F0DA
   
  I used the Microsoft Fix It tool twice and it did not affect the result.
   
  Window XP Home Edition SP3, Build 2600 OS; IT IE 8.0.6001.18702. Wired internet.
   
   

  The Fix - It tool crashed my system.  The link of http://support.microsoft.com/kb/822798 did nothing to improve the problem and may have made it worse, because the Catroot2 directory that was renamed can be restored as Catroot2 again.  No instructions for this that I could find.  Try to do it myself generates a Protection Fault When you rename.  This new backup directory has a lot of files it contains, that newly created, almost nothing.

  The many steps in http://support.microsoft.com/kb/958050 link also has not solved the problem.  After several restarts and system breaks down, the only thing that has changed is the error Code: 0 x 80070002 (now).

  When we look at upwards of this error on the KB code, the call for a tool download instructions to check the system, but it is not applicable for Win XP SP3.  Following two no this solution eliminates the top 2/3 of the web page when you try to copy the instructions to paste in Notepad.

  It seems to me there are different vintages of tool Fix - It that are presented, each one a little different in look and performance.  Not just another module, but results reports and accidents vary with the version.

  A consistent Fit-It idea returns 'default Windows data update locations have changed"and"Repair Windows Update sites default"displays as"Not executed", but there is no way to perform this element.  Don't know if it's really a place has changed, I know that I did it and how long and including June 12, all except 4 updates installed correctly.

• Windows Vista cannot stop and restarts automatically?

  After you click stop, the system reboots automatically.

  I ran 3 different scans and found nothing.
  System Restore has tried at least 2 months ago, but nothing has changed.
  I recently install anything and it just randomly started to happen.
  Thank you!

  Here are some relevant links:

  Windows vista restarts when I choose "shut down" or "sleep".
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/Windows-Vista-restarts-when-i-choose-shut-down-or/4d2b1437-8e62-4c5a-9fce-1251d3f8ccc5

  http://www.Vistax64.com/Vista-General/73246-Vista-restarts-after-shut-down.html

  http://www.Vistax64.com/general-discussion/188274-Vista-reboots-shutdown.html