Windows XP does not recognize SD cards in card Kodak A250

Similar Questions

• Windows 7 does not recognize the graphics cards

  I have been using the same PC for the last six years of the game without any problem, I upgraded to Windows 10 and things went to * a few days after talking to Microsoft Care I was told that with the latest version of Windows 10 updates and other updates my system is no longer compatible with Windows 10 and I did a clean install to Windows 7. now, Windows 7 does not recognize my graphics cards 2 x 'GeForce GTX 480"with SLI configuration.

  In "Device Manager", it shows two units operating as VGA standard with no details etc.

  It install drivers for the 'GeForce GTX 480"because it does not recognize their being there.

  Any ideas or help... Please also stay simple for a non PC Geek

  No problem if nothing else, you've found the system images is now with win-10 days worth being pushed m main $ :)

  It of free and worth to be using,

  http://www.Macrium.com/reflectfree.aspx

• TS15g067cl laptop: memory card reader does not recognize the card

  The card reader does not recognize the cards.  It does not have a drive location (example: f drive).   This makes it impossible to veiw the files or photos on any (I tried six different) of my SanDisk SD cards.  I can't find anywhere to downlod corrected card rhe read updates update drivers or BIOS for my system.   I just bought this computer 1 week ago and do not understand why I read in the forums about driver issues of card reader for the last year.  Windows 8.1 has been out for some time.  Why HP would sell these computers without updating the software to make them work as they should?

  Thanks for the info.  Disk management does not show the drive.  The problem was resolved after reloading BIOS, as suggested in another post.

• Windows 7 does not recognize my external screen.

  Windows 7 does not recognize my external screen.  I checked the driver and even of the went to the NVIDIA site and plugged my material for my graphics card ID to get the correct driver and yet, it does not recognize it!  So here's what I have right now since I've upgraded to Windows 7 Ultimate edition = Standard VGA graphics card.  If someone has a legitimate solution to this problem, feel free to comment! Thank you

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 does not recognize my color and barnes noble nook

  Windows 7 does not recognize my color and barnes noble nook.  It recognizes my external WD hard drive, but when I plug my nook, plug-and-play do not come and tell me that he has found a new device.

  How can I solve this problem?

  Angi

  ______________________

  My personal website:
  Absolutely of Angi
  http://absolutelyangi.com
  _________________________

  Dell Inspiron 530
  OS version: Microsoft Windows 7 Home Premium, Service Pack 1, 32-bit
  Processor: Intel (r) Core (TM) 2 CPU Quad Q6600 @ 2.40 GHz, x 64 family 6
  Model 15 Stepping 11 processor Count: 4
  RAM: Mb 3061
  Graphics card: Intel (r) G33/G31 Express Chipset Family, 256 MB
  Hard disks: C: Total - Mo 476929, Free - Mo 349361;
  Total I: - Mo 476937, Free - Mo 363385;
  Motherboard: Dell Inc., 0FM586, CN736048B800IW.
  Antivirus: Kaspersky Internet Security 2011 - 11.0.2.556

  Look at this thread, third substantive post.

  http://bookclubs.barnesandnoble.com/T5/nook-technical-support/win-7-won-t-recognize-nook/m-p/694110/message-UID/694110#U694110

• Windows 7 does not recognize my Dell 2407WFP monitor - only as monitor not Plug-and-Play credits.

  This monitor is able to execute the resolution 1920 x 1200 and it worked well on the same laptop Dell Latitude D820 under XP Pro SP3. However, Windows 7 does not recognize the Dell Monitor (shows as non-Plug-and-Play monitor credits) and will go no higher than 1600 x 1200. The monitor on the laptop will run in 1920 x 1200 and also 1920 x 1200 poster XP running inside a virtual machine, so the problem is with Windows 7 not properly recognizing the Dell 2407WFP monitor in VGA mode. All other operating systems work very well to support the material properly.

  The laptop is running a NVidia Quadro NVS 120 M map. I tried several versions of Vista Dell drivers (do not have for Windows 7 - therefore Dell is not to follow). NVidia has no drivers for this card because it specially designed for Dell and all pilots must come from Dell (new Dell doesn't help here - I know that Windows 7 was just recently released but there are important suppliers for some time. Thought Dell was big by taking charge Microsoft with their business line of products but I think that even they cannot follow.

  It seems that the problem is also Windows 7 is not correctly identify the Dell monitor and many other monitors as well. Unfortunately, I doubt that this issue will never be resolved by Microsoft. I have yet to see that all the issues MS resolved long. I begin to see the truth in the last pub in Apple vs MS on television. Well the time to upgrade the new hardware.

  If anyone has a suggestion or a solution to solve this - I'm all ears!

  Don

  wait until that Dell publishes drivers for win 7 or you can contact them for the same thing.

• Install Windows 8 does not recognize the system drive

  I built a new machine (chart below). Since this is a new machine and not an upgrade, I bought Win 8 Pro 64 bit OEM to do a clean install. The SSD is my system disk that Windows 8 will be installed. Four data drives are mirrored, two for the other two. Construction went perfectly. The BIOS recognizes all six disks: 1 SSD, 4 HDD, 1 DVD.

  Insert and boot the disk of Windows 8. Accept the EULA, enter the product key. Arriving at the page "Where do you want to install Windows?", only four hard disks are listed. The SSD (installation to go) is not found by Win 8. ??? I tried to change ports SATA, cables, power supply - no difference. For each new change of hardware, the BIOS still sees everything. This isn't a hardware problem.

  The question remains: why the installation of Windows 8 does not recognize the SSD drive. All five disks are on AHCI. I'm not in RAID.

  I spoke with crucial technical support of all (manufacturer of the SSD). They were also surprised that the drive does not appear in the list.

  Does anyone have a solution? I spent all the money on hardware, as well as the new version of Windows and I cannot install it.

  This is the real kick in the teeth: Microsoft won't support me. The OEM of Windows 8 version is the same as manufacturers, such as Dell or HP. Support told me I had the support of the manufacturer. HA! I am the manufacturer. Either that or upgrade from an earlier version of Windows. This means that any that a new construction machine will get ZERO assumption of Microsoft. All just great.

  Thank you in advance for any assistance.

  Windows 8 Pro 64-bit (full version) - OEM
  Intel Core i5 - 3570K
  Card mother GIGABYTE GA-Z77X-UD5H
  Crucial Ballistix 2 x 8 GB DDR3 1600
  Crucial M4 2.5 "128 GB SSD (system disk)
  WD Green WD30EZRX x 4 (data readers) 3 TB drive
  Rosewill Challenger-U3 ATX Mid Tower Case
  SeaSonic M12II 620W 620 Bronze PSU
  ASUS DVD writer

  The DSS must be LOW LEVEL FORMATE.

  Once, there may be no other [HDDs] not connected to the SATA ports.

  Install Windows 8 Pro now.

  [Edit] Can someone please mark this as answered? I can't because I posted the question. Thank you.

• ASUS Tablet does not recognize SD card

  My got transform TF 101 does not recognize micro SD cards. How can I solve this problem?

  Hi, Odiec,

  You have the software express gate on the system?  Update of the software

  http://support.ASUS.com/search/KDetail.aspx?SLanguage=en&no=80E22F30-B3FF-1DFE-9DFB-5CED63C0B176&t=2

  Put the card in the slot

  Restart the computer

  Now the system does not recognize the card?

  You formatted the card?
  https://www.sdcard.org/downloads/formatter_3/

• Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Disconnect all USB storage.

  Run this tool by do right click and choose 'run as administrator '.

  Of course, all first extract it:

  http://www.Uwe-Sieber.de/files/drivecleanup.zip

  If your XP is 32 bits, use the Win32 folder.

  Reset.

  If you still can't find the drive, assign it a drive letter in disk management.

• Windows xp does not recognize the hp c6180 photosmart printer

  My windows xp does not recognize my hp c6180 photosmart printer

  Hello

  1. were you able to use the same printer without any problems before?
  2. don't you make changes on the computer before this problem?
  3. you receive an error message?

  See the following articles that may help you resolve this problem.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Resources for the resolution of the printer in Windows XP problems
  http://support.Microsoft.com/kb/308028

• Windows XP does not recognize the Sony Walkman NWZ-E344 media player Red

  original title: Sony Walkman NWZ-E344 Media Player Red

  My Windows XP does not recognize my Walkman when installed in USB. All other computers do, then only, assumes that I do not have good pilot.

  Hi brumbybrat,

   

  You must install the drivers for the walkman to recognize.

   

  More information is available in the following links:

   

  Is there a CD of installation for the Walkman® player?

   

  How to install manual and the Content Transfer software for the Walkman® player

• Windows Vista does not recognize my Ipod Touch

  Windows Vista does not recognize my Ipod at all. He even appears in Device Manager. I know that is not my USB cable because it is new, and it isn't my Ipod because it works on Mac computers. I just need someone with expertise to help me get my computer to recognize my Ipod so I can go back to enjoy my music.

  Hello

  MTP mode for WMP11 sync - mode MSC to treat the MP3 as a reader. So you have set up in the MTP.

  -----------------------------------------
  If necessary:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Make sure that Windows is updated appropriately that there have been several USB updates.

  1 check that the driver letters for them, for a player, if the drive of the default drive letter is changed, what is happening.
  Mine was h: I added a device that took H: and the player stopped. So I put it back to H: and the other
  device to J: and everything worked again. If necessary start - type in the area of research-> disk management find top
  -Right-click on it - RUN AS ADMIN

  Don't forget to remember the MP3 must be set to the PSG to sync with WMP, and meteorological service of Canada to copy and delete files
  and update the firmware.

  If no joy follow these steps:

  You may need a powered hub. (all the USB ports on your computer are not powered, often only 2)

  Try these:

  Make a Restore Point

  Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

  Here, your devices are the MP3 player.

  Now look everywhere EXCEPT the USB controllers for your devices (cannot be found) and if you find
  It RIGHT CLICK and UNINSTALL all.

  now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

  APPLY/OK

  RESET

  This refresh battery USB and hopefully it will allow the unit to install. (You may need a powered hub)

  Here is the similar procedure under XP, Vista is the same, except that we need clear specific devices, as appropriate.
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Vista does not recognize video card

  I recently moved, and after I put my computer my monitor is not a signal. I plugged my monitor on the main port and it came. My computer does not recognize the card in the Device Manager. I opened it and inspected the map for all the Visual problems and plugged it upward and noticed that the fan on the graphics card not working. I then did a full restore of the system, reinstalled the installation CD supplied with the card after you disable the onboard and restarted my computer. Still does not recognize the card and after restarting it on my integrated card. Then, I went into the BIOS and selected PCI-E as my first. So... im out of ideas here, if the fan is still ongoing is not the card still work? I don't have another office to plug it in. Is there another way to know if the card works? Why it can't recognize the graphics card which was working fine before the move? On a side note, the computer was unplugged for 2 weeks during this time, but I don't know why this could be a problem.

  IM using Vista 32 bit.

  Hi Myriam.
  Thank you for visiting the Microsoft Answers forum
  If the fan on the card does not is an indicator that the card is not powered, so the only way to test it is to plug it into another machine to see if the motherboard is not giving power or is the card that is bad. You can also try to plug a PCI-E device and see if it has power.

  You have all the cables connected directly from the power supply to the graphics card?

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows 7 does not recognize my iphone

  After you download the photos on my iphone, windows 7 does not recognize my iphone. in other words when I open my computer the iphnoe isn't here; but in Panel, in devices and printers, it appears with unspecified Apple Mobile Device USB driver, in the form of a generic icon.

  When I run Auto Play in the search box; the iphone is there with the icon to the right, but there is no screen options menu. It behaves as if it were invisible.

  It is important to note that this started AFTER downloading the pictures for the first time. Until windows has always recognized my camera properly.

  Thanks in advance for any help.

  Here's your solution:

  iPhone or iPod is not correctly recognized by computer when USB drivers are not installed properly or are out of date
  http://support.Apple.com/kb/TS1538

  Follow all the methods in the order that they are listed. The above article helped a lot of people the question of fixing with iPod/iPhone not getting detected do not.

  See you soon! "That's all a pension chequer nights and days,"
  Where destiny with men for pieces plays;
  Here and there, mates and kills.

  In a world without walls and fences, who needs windows and doors? Life sucks! Getting used to!

• My Windows 7 does not recognize my external hard drive

  My Windows 7 does not recognize my Apacer AC203 external hard drive 640 GB. I test this drive on 2 laptops with Win7 and 1 PC with Win XP and on all computers of this it works fine without any problems.

  Help, please. Al3k5aNd4R.

  My problem is with the computer, no cell phone and I have solved.

  I use the extension cable USB to my PC desktop. When I swich hd directly to the computer, then hd works...

  I have the same problem on the computer of a work which is also usb extension cable and it also do not work. HD :)

  Thanx for you're both.