Windows XP does not recognize the Crucial upgrade 512 RAM

MS Windows XP Hm Ed worm 2002 Ser Pk 3: Sony...

Intel (r) Pentium (r) 4 CPU 2 .40GHz

2.39 GHz, 480 MB of RAM (I don't know what this means)  

Hello

Crucial has conducted a scan for me.  It says I have an installed 512 with 2 empty slots for the upgrade.

I sent for a 512.

When I opened the computer, I had one finds it, more an another slot has been filled.  I then installed the 512 I sent and start the computer to the top.

Trying to figure out how to get the computer to learn about new 512 RAM and wonder others there who Crucial has not detected.

When I inserted the new 512 RAM, it locks in place with the locking clips.

Can someone help me?

I'm not looking for the posting of B4 of the problem.  Found a question, but no one did not answer.

Thank you

Excellent news.  You are welcome.

The fact that the RAM is from different companies is not as important as the question of whether all the modules are of the same type.  Apparently they are.  I suspect that the module in the second location was not sitting correctly, and that this caused the BIOS (which is what first looks for material) to stop searching for RAM, after acknowledging the first location.

When you took them out and put them back in, you did it correctly, and now all of the RAM is recognized.

FYI, if you look at the address of the 'web' page you have included, you'll see that it starts with file:/// instead of the usual http://.  The "file" followed by a colon and 3 slashes indicates that it is a local file.  The rest of the name indicates that the file is in a directory named "New folder" that you created in your 'My Documents' folder.

You must be very happy that no one else can see that 'web page' on the Internet... because if they could see this file, they could also see everything on your computer.

Tags: Windows

Similar Questions

  • Windows XP does not recognize the good amount of RAM

    I just upgraded my Dell E310 from 1 GB to 2 GB of memory, but Windows XP says I have only 1 GB. How do I fix this?

    The first thing you need to do is to enter the Dell Setup (also known as the BIOS). You have to press F2 (maybe hitting several times) immediately after the turn on/off the PC. Looking for a parameter called OS install. If it is set to change, OFF. Save the changes and exit.

  • Install Windows 8 does not recognize the system drive

    I built a new machine (chart below). Since this is a new machine and not an upgrade, I bought Win 8 Pro 64 bit OEM to do a clean install. The SSD is my system disk that Windows 8 will be installed. Four data drives are mirrored, two for the other two. Construction went perfectly. The BIOS recognizes all six disks: 1 SSD, 4 HDD, 1 DVD.

    Insert and boot the disk of Windows 8. Accept the EULA, enter the product key. Arriving at the page "Where do you want to install Windows?", only four hard disks are listed. The SSD (installation to go) is not found by Win 8. ??? I tried to change ports SATA, cables, power supply - no difference. For each new change of hardware, the BIOS still sees everything. This isn't a hardware problem.

    The question remains: why the installation of Windows 8 does not recognize the SSD drive. All five disks are on AHCI. I'm not in RAID.

    I spoke with crucial technical support of all (manufacturer of the SSD). They were also surprised that the drive does not appear in the list.

    Does anyone have a solution? I spent all the money on hardware, as well as the new version of Windows and I cannot install it.

    This is the real kick in the teeth: Microsoft won't support me. The OEM of Windows 8 version is the same as manufacturers, such as Dell or HP. Support told me I had the support of the manufacturer. HA! I am the manufacturer. Either that or upgrade from an earlier version of Windows. This means that any that a new construction machine will get ZERO assumption of Microsoft. All just great.

    Thank you in advance for any assistance.

    Windows 8 Pro 64-bit (full version) - OEM
    Intel Core i5 - 3570K
    Card mother GIGABYTE GA-Z77X-UD5H
    Crucial Ballistix 2 x 8 GB DDR3 1600
    Crucial M4 2.5 "128 GB SSD (system disk)
    WD Green WD30EZRX x 4 (data readers) 3 TB drive
    Rosewill Challenger-U3 ATX Mid Tower Case
    SeaSonic M12II 620W 620 Bronze PSU
    ASUS DVD writer

    The DSS must be LOW LEVEL FORMATE.

    Once, there may be no other [HDDs] not connected to the SATA ports.

    Install Windows 8 Pro now.

    [Edit] Can someone please mark this as answered? I can't because I posted the question. Thank you.

  • LG C500-G. AEE5GE1 with Windows 7 home prem OA MEA have been formatted. But despite giving the product key and Windows registry does not recognize the activation. Help, please

    LG C500-G. AEE5GE1 with Windows 7 home prem OA MEA have been formatted. But despite giving the product key and Windows registry does not recognize the activation. Help, please

    Name of the operating system Microsoft Windows 7 Home Premium

    Version 6.1.7601 Service Pack 1 Build 7601

    Manufacturer of operating system Microsoft Corporation

    System name HANDSOME-PC

    System manufacturer LG Electronics

    System model C500.-g. AEE5GE1

    System Type X 86-based PC

    Processor Intel (r) Core i3 CPU M 390 @ 2.67 GHz, 2666 Mhz, 2 Lossnay, 4 logical processors

    H46YSF00 Version/Date of BIOS American Megatrends Inc., July 2, 10

    Product key:

    X 16-96084

    CONCERNING

    TUESDAY BIOJY

    Have you tried to restart by phone?

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • Windows 7 does not recognize the graphics cards

    I have been using the same PC for the last six years of the game without any problem, I upgraded to Windows 10 and things went to * a few days after talking to Microsoft Care I was told that with the latest version of Windows 10 updates and other updates my system is no longer compatible with Windows 10 and I did a clean install to Windows 7. now, Windows 7 does not recognize my graphics cards 2 x 'GeForce GTX 480"with SLI configuration.

    In "Device Manager", it shows two units operating as VGA standard with no details etc.

    It install drivers for the 'GeForce GTX 480"because it does not recognize their being there.

    Any ideas or help... Please also stay simple for a non PC Geek

    No problem if nothing else, you've found the system images is now with win-10 days worth being pushed m main $ :)

    It of free and worth to be using,

    http://www.Macrium.com/reflectfree.aspx

  • Qosmio F30 - 112 - Windows XP does not recognize the HARD drive

    Hello.

    I have a Qosmio F30-112.
    I tried to install the Windows XP Professional instead of the Media Center edition.
    However, during the execution of the installer, my laptop does not recognize the hard drive. Therefore, the installation cannot continue.

    I thought it might be a problem of corruption with my laptop and reinstalled Media Center Edition successfully.
    But when I try to install XP Professional it always gives me the same error.

    Suggestions for the configuration of the BIOS or solutions for why this is happening?

    Thanks in advance.

    Hello

    Just a question:
    You are looking for in this forum for other similar issues with regard to the installation of Win XP and lack HARD drive? I doubt

    The fact is that your notebook has a SATA controller and you need a SATA (Intel Matrix Storage Manager) driver.

    You should have a look here in this doc from Toshiba:
    [How to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]

    and should also search this forum for other threads

    Good bye

  • Windows 7 does not recognize the installation discs

    Hello

    I have a problem, and I don't know if there is a solution, but here goes.

    My laptop is a HP DV6-7029WM Windows 7, 64 bit.

    The hard drive was dead, and he was replaced last month.  I sent it to HP.  C is the hard drive, and was originally the recovery on D. Removable media were on E, and when I connected a USB stick or memory card reader it would on F.

    When I came back, hard drive was on C as it was originally, and there was no recovery drive D. D is now my removable media drive. When I put in a USB stick or a memory card reader, which is now on the E drive.

    After I bought this, I put the recovery on a USB key, but I've accidentally thrown out. (My mistake) So I ordered the installation diskettes after that I return my HP PC.  I had 2 DVD system recovery disks and an Application and a recovery DVD Drivery.

    I want to reinstall Windows back to the default settings. I put disc 1 (System Recovery DVD) and close.  I reboot and it goes directly to the office. I hear the whirring disc, but nothing happens.

    I go to the control panel > Recovery > advanced retrieval methods. I click on restart, and it loads files and then says DVD set, which I do. He told me that he does not recognize the installation disc.

    I googled this problem and found a poster on CNET that had the same problem as I do. Also, I can't do a system restore.  My problem is the same as this poster on CNET.  I can read DVDs and CDs.  Those that work very well.

    http://forums.CNET.com/7723-19411_102-568059/Windows-7-installation-disc-not-recognized/

    The files are on the DVD, because I see them.

    I don't know what to do. Should I send my PC back? Can I do to solve this problem?

    Thanks in advance.

    pen

    Hello:

    With recovery disc 1 into the DVD drive, restart the computer and at the beginning of the HP welcome screen, press the ESC key to display a menu of options.

    Select the F9 boot menu option.

    Select the DVD drive on the list of bootable devices, and press the Enter key.

    Watch the screen for additional instructions.

  • Windows xp does not recognize the hp c6180 photosmart printer

    My windows xp does not recognize my hp c6180 photosmart printer

    Hello

    1. were you able to use the same printer without any problems before?
    2. don't you make changes on the computer before this problem?
    3. you receive an error message?

    See the following articles that may help you resolve this problem.
    Printer in Windows problems
    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Resources for the resolution of the printer in Windows XP problems
    http://support.Microsoft.com/kb/308028

  • Windows XP does not recognize the Sony Walkman NWZ-E344 media player Red

    original title: Sony Walkman NWZ-E344 Media Player Red

    My Windows XP does not recognize my Walkman when installed in USB. All other computers do, then only, assumes that I do not have good pilot.

    Hi brumbybrat,
     
    You must install the drivers for the walkman to recognize.
     
    More information is available in the following links:
     
     
  • Windows 8 does not recognize the photosmart 5510

    Cannot use my HP Photosmart since the installation of Windows 8. My pc does not recognize the printer.

    Hello

    Please download the following program and run it on your Windows 8 machine:

    http://ftp.HP.com/pub/softlib/software12/COL44840/MP-109033-2/hppiw.exe

    You need the printer on your home network.

    Kind regards.

  • WINDOWS 8 DOES NOT RECOGNIZE THE SCANNER OFFICE HP OFFICEJET 4500

    MY WINDOWS 8 DOES NOT RECOGNIZE SCANNER OFFICE OF HP OFFICEJET 4500

    Hello

    1. don't you get any error message when the scanner not detected?

    2. do you insert scanner in another port of the computer or to another computer?

    3. were there any changes (hardware or software) to the computer before the show?

    4. other recognized devices?

    If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

    Run the hardware and devices Troubleshooter and see if it helps.

    a: press the logo Windows + O to open the search box.
    b: Type Troubleshooting, press on enter.
    c: now click material and its.
    d: now click hardware and devices , and then click Next 

    Answer please if you have any questions.

  • Lost in car-Windows xp does not recognize the slave drive

    I do reinstall xp home, no problem when I did the system does not recognize the slave drive I have.  As far as I can tell that it's all hooked up correctly.  When I go into disk management it does not recognize the drive either.  All of the suggestions.

    Hi james.williams,

    1. How is the drive connected to the computer?
    2. What is the number of the brand and model of the player?

    I suggest that you check the jumper settings and make sure that the jumpers are correctly positioned.

    Make sure they are in the two master/slave jumper and not cable select.

  • Recovering the Windows system does not recognize the hard drive

    Computer does not recognize the hard drive when booting.  Guard gives me 1782 disk error.  Then try to use the ROM installation thing and throw a disc hard test there is no option to test anywhere.  Computer was working fine this morning and then I stop when I turned it back on it was not properly start.

    I have a zt3000 running xp sp3

    someone please help me, thanks

    Hello

    Please reinsert the drive from the rear panel and check if the device detects the drive hard in case you have the same problem, then the hard drive is bad, you need to replace the hard drive and reinstall the operating system on the unit to return to its operating state.

  • Windows XP does not recognize the iPhone - device not recognized error

    I am running Windows XP (SP2 I believe) and whenever I plug in my iPhone I get the error not recognized USB device. If iTunes does not recognize it and I can't sync. My guess is that I'm missing or have an updated driver, but I don't know how to install. If it makes a difference, I am using a brand new MacBook Pro and Windows XP via Parallels Desktop. I don't think it's the question, though, as I used to be able to sync with my Manager (ACT!) contacts via Outlook. It seems to be simply a function of Windows is not able to identify the iPhone via USB. A simple solution would be appreciated, but I'll take complicated if that's all that's available.

    Hello abogadopeter,

    Thank you for visiting the Microsoft answers community.

    This question has been a known issue that seems by Parallels. I did some research and read through some of the threads for workarounds. He doesn't seem to be a conclusive solution, but works to some extent. You can take a look at http://forum.parallels.com/search.php and simply search for ipod and look through some of these institutions.

    Hope this helps Chris.H
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Computer Windows Vista does not recognize the USB mouse

    Original title: does not recognize usb devices... Im trying to use the mouse... got a new mouse... still does not recognize it

    worked but stopped, got a new mouse and still does not recognize it. I really need it... help please

    Hello


    1. do you get an error message?
    2. would either not detected other USB devices in the same port?

    Method 1: perform the steps in the article mentioned below and check if the problem persists.
    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

    Method 2: run the Fixit and see if the problem is resolved.
    http://support.Microsoft.com/mats/hardware_device_problems/en-us
     
    Method 3: update the chipset drivers and see if the problem occurs.
    Note: you must contact the manufacturer of the computer to update the chipset driver.

    Hope this information helps.

Maybe you are looking for