Windows XP does not start after the installation of 3 GB of RAM. Will start with only 2 GB or less.

Similar Questions

• LIP does not work after the installation of a local language, writing in my windows software 8

  LIP does not work after the installation of a local language, writing in my windows software 8

  

  This icon is hidden... and there is no preview in the installed LIP.

  
  I hv uninstall the software, but for the LIPS does not work

  Hello

  You use the Microsoft Account or Local user account?

  Create a new user account and check the status of the question in the new user account.

  Create a user account

  http://Windows.Microsoft.com/en-in/Windows/create-user-account#create-user-account=Windows-8

  You can also refer to:

  User accounts: frequently asked questions.

  http://Windows.Microsoft.com/en-in/Windows-8/user-accounts-frequently-asked-questions

  Thank you.

• Satellite L655 touchpad button ON / OFF does not work after the installation of VAP

  Why the Start button / stop the touch pad does not work after the installation of vap?

  May I ask what system and what PPV version do you have installed?

  I assume you mean on the Fn + F9 key combination...
  Is this right?

  Another FN button work as shouldy?

• Windows Server Update service does not work after the installation of KB2720211

  I have a Server 2008 SP1 32-bit Standard, which had the role of Server Update for the Windows software installed connected to a WSUS upstream server and everything worked, with 17 clients connected to him and get everything their approved patches.  It was a new server starting with WSUS added at this time 1 months ago.  He had to be upgraded to SP2 S2008 which I did and WSUS have continued to function.  After being on SP2, there was another 152 patches to be applied and after that WSUS does not work anymore.  It appears 1 patch that has been applied has been KB2720211 that seems to cause problems for a number of people.

  The problem is that the update service does not start.  An error message comes back that the service has not responded in a timely fashion and I can't find the log files anywhere on what it is.  Here is what has been done so far all that in the same issue:

  1 deleted WSUS and restarted and installed it again.

  2 Remove WSUS and Windows Internal Database, restarted and installed it again (using the download of KB972466).

  2.1 install SQL Management Studio and logged to an internal database SUSDB and checked it is not set to single user (I believe it is set for multiuser name but I'm going from memory)

  3. install the KB2720211.

  4. installation KB2734608

  5 remove WSUS and Windows Internal Database, restarted and installed it again (using the download of KB972466).

  I am looking for any information on how to solve what is the question, because there is nothing in the log files I can find and no event in the windows event viewer.  I am ready to start with the server however if there is something I can look at to possibly solve the problem, please let me know.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows 7 does not open after the updates installed

  Help, please. Computer my son makes the automatic updates today and now it does not start. It takes me to the blue Windows screen then appears a box that says "System Recovery Options". It has two options

  Recovery tools 1-use by choosing an operating system (no present in the box). I tried this one and it did not work.

  2. restore your computer using a system image, which does not either even though I know he created images of system. Please any information would be greatly appreciated.

  Once I try these options from the dialog box get, with startup repair, System Restore, system image recovery, Windows memory Diagnostic and invites but not these wil do anything either.

  What can I do so that he could start over again what can I remove updates?

  Hello

  Disable automatic restart your computer and check if there are errors displayed when the computer does not start. To disable automatic reboot follow the link below.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Try the steps suggested by David Y post dated November 2, 2010 in the link given below and check if that helps.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/a6071159-db22-4076-b5d8-31f446dbdf32

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update does not work after the hard drive has been replaced

  Hello
  I have the same problem, replaced in my Toshiba HD, rebuild from Sysimage, Windows Update does not work. A ran "fix the problem with the Microsoft Windows Update is not working.
  Problem still exist.
  The message that I got while trying to update: "Windows Update cannot currently check updates,
  because the service is not running. "You may need to restart you computer.
  Stop and then restart the service, still no luck.

  I ran Windows troubleshooting. He finds two problems with Windows Update components, it corrects.
  The problem still exists.

  The other post:

  Another interesting fact:
  After the reconstruction the new disk, user account control does not recognize Windows programs.
  for example: execution of Perfmon.exe, the Publisher is unknown! However, when I download the program Windows FixIt, Publisher is recognized as Microsoft Windows. It seems that user account control does not recognize the Windows programs that had found the new HD, but acknowledges those who is downloaded from the internet.
  I guess there is a problem with the license, Windows was preinstalled on the Toshiba and replace the hard drive could have caused a few conflicts of licensing.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Update-not-working-after-hard-drive/77ab54ca-34b0-49DF-a268-bd07db68d887

  The same problem. Cloned old HD on a larger hard drive. Everything worked perfectly except NO indexing and update WITHOUT windows - the two recurring problems that seem to appear on the forums after a change of hard disk.

  INDEXING resolved with change to "Intel rapid storage technology." Google what I put in quotes, choose the Download Center and get the specific to your OP and the controller software.

  UPDATES have been a little more frustrating. The microsoft .fixes and convenience stores were without help.

  Go to control panel / system and Maintenance / administration tools

  Select Services

  Stop the Background Intelligent Transfer Service

  Stop Windows Update

  In 'My Computer' go to Windows / Software Distribution

  Right-click "DataStore" folder. Rename it to Datastore.old

  Rename the folder 'Download' Download.old

  Return to Services and restart the Background Intelligent Transfer Service and Windows Update.

  Look for the updates. It will take some time because you deleted the database.

  I hope this helps!

• Audio does not work after the installation of Vista on Satellite Pro a series?

  Done a format and a new facility with vista ultimate and can't get the audio from realtek to work.
  The drivers install properly but don't have still no sound.

  Download realtek 97 and drivers HD, but still no luck.

  I had this problem some time and fixed it but I can't find where I found the solution of :(

  Any help would be great, thanks!

  Hello

  First if all would be very useful to know which model of laptop you have.
  Second, you could find the driver of his right on the page of Toshiba and so you n t need to test several audio drivers! The one on the Toshiba driver site works for sure.

  I read about a similar problem on Vista OS and these Toshiba document should help you:
  [Audio cut off (no sound) after the installation of Windows Vista: http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1886 758xml & sliceId = & dialogid = 54568603 & stateId = 0 0 51373343]

  Check it out!

• Bluetooth doesn't work does not correctly after the installation of Windows Vista Home Premium Service Pack 2 (SP2) on Dell laptop

  I searched this forum and almost all resources on the net for days now nothing works.  Give the message to a thread more appropriate that I couldn't find one that is truly representative and am a newb at this.

  Summary of the problem: Bluetooth connectivity does not work properly after the window Vista Home Premium Service Pack 1 and 2 installation (SP 1 and 2).

  My system:

  Laptop Dell Inspiron E1705, 32-bit Winows Vista Home Premium SP2, Dell Wireless Bluetooth 355 Module + EDR 2.0

  * My system was purchased in 2006 with Windows XP, but was not entitled to a free Windows Vista Home Premium Upgrade I did. I installed Windows Service Pack 1 and 2 about a week ago.

  Problem: After downloading and installing the Windows Vista Home Premium Service Pack 1 and 2 (SP 1 and 2), my system does not recognize my Bluetooth (a touch of Sprint also) device known as the HTC Vogue.  I stress that I have not had any problems with this device before downloads.  I can't revert to the pre - SP State 1 and 2 because my system restore does not have these points more.

  I have read several posts on various sites about people having similar problems with Bluetooth connectivity after the Vista SP 1 and 2 facilities.  The problem is obviously the need for an updated driver.  I went to the site to download driver Dell and the Blueooth only updates available are the following. (Note: these drivers all date from 2006 and 2007).

  http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=RC956904&l=en&s=pub&SystemID=INS_PNT_P4_9400&os=WLH&osl=en&servicetag=&catid=-1&impid=-1&deviceid=12084&libid=5&typeid=-1&dateid=-1&formatid=-1&source=-1&releaseid=R159805&formatcnt=1&vercnt=1

  I had these installed before the SP 1 and 2 have been installed and they worked very well. After the upgrade, these drivers do not work.  They won't recognise BT devices.  I tried to upgrade the drivers by using update Broadcom suggested below it, but an error of following installation to contact Dell.

  http://www.Broadcom.com/support/Bluetooth/update.php

  I contacted Dell via e-mail and on the phone, but they want to charge me $60 for a one time service call just to talk about the problem because my warranty has expired. Provide updated drivers is not a problem of security in my opinion.  Even after explaining the situation, their continuous support to just send me the link to download Driver Dell above with out-of-date drivers.  I guess that's what they are charged to do, they do not have to admit a problem of compatibility.  This obviously the same link they would charge $60 to send.  I explained that I need just a Bluetooth Driver from Dell to at least version 6.3.   Needless to say, I will never buy another Dell product.

  On my end, I tried to uninstall my current drivers and then by installing a newer driver to support Gateway (Version 6.2.1.500 for and Acer).  This allows me to install some parts of this update and the update Broadcom. However, it is not a perfect installation and expires after about 90% saying "this update is not for this system" because it is the gateway not Dell to be provided.  Displays the version of the driver on my computer is Version 6.3.5.430 after doing this, but it is not a complete installation and some features are not available.

  Does anyone have experience with this issue? I would like to have a link with some bluetooth drivers generic Version 6.3 type which will allow me to use the Broadcom link to upgrade to the last version that works with Vista SP 1 and 2.

  Thank you for your help.

  Support FREE from Microsoft for SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Intel WiDi does not work after the installation of update Windows 10 anniversary. X 1 yoga

  I get a message Notification of Windows ' cannot run this application on this PC: Intel WIDI software display does not work on this version of Windows. "

  This message appeared after the upgrade to Windows 10 anniversary.

  Indothai,

  Microsoft to Intel Widi support was eliminated in 10 Windows. WIDI has been replaced by an application called Miracast. If you try to run an application depends on Widi, you may need to upgrade the application or to find a new use.

  For more information, see this Intel review: https://communities.intel.com/docs/DOC-111153

  Thank you

• Windows 7 is not genuine, after the installation of windows 8 in dual boot.

  When I want to upgrade to windows 8, Windows 7, I think I should try windows 8.

  So, I installed windows 8 with dual boot.

  But after the successful Windows installation 8, when I started my laptop with windows 7 OS, it shows that the copy of windows is not genuine.

  What should I do?

  How can I get my windows 7 back as it was?

  Please help me... :'(

  Download and run the Microsoft Genuine Advantage Diagnostic Tool:
  Download the tool: http://go.microsoft.com/fwlink/?linkid=56062
  Post your results (copy button) and paste the results in your answer.

  As a starting point, the first thing you should check is the section to three figures on the number of product ID, if it corresponds or is included in one or two digits of the examples below, you have probably a MSDN or TechNet product key. "These keys must not be sold for retail use.

  065 066 067, 068, 069 to Ultimate, box 220 for professional and 230, 231, 232 area for Home Premium,

  There are probably others, but they should be close to those that are displayed"
  (How to be certain - download the Microsoft Genuine Advantage Diagnostic Tool listed above).

  Note: Though that illegally sold MSDN/TechNet allow product key for activation of more than one
  (usually 5 or 10), so these keys can be sold "several times" before activation may fail.

  J W Stuart: http://www.pagestart.com

• Windows 7 does not start with the new msi motherboard

  Yesterday, I bought a new motherboard, processor and 8g of ram in my computer. After all what adjustment and replacement of my old motherboard with the new, I started my computer to find that Windows 7 unbootable not. Instead of windows 7, I get the screen click on BIOS II (2). The configuration screen allows me to launch Winki but not Windows 7 because it was not found. The motherboard came with a utility disk drivers msi and AMD chipset which, when inserted in my hard disk, loads up to Winki. This version of windows 7 (Home Premium 64-bit) came pre-installed with my old mother/computer(Thus, I do not have the windows 7 installation disk) card. Is there a way I need to activate Windows 7 on my new motherboard?

  Hello

  Well, you have some problems. First of all, with a new motherboard you need a new copy of Windows - not only the DVD, but a whole new product key must be purchased. It's just the terms of the license: a new motherboard is equivalent to a new computer, and each computer must have its own copy of Windows.

  So where you buy your copy of Windows 7, I would make sure that it came with a DVD image. Otherwise, you can tell us which version of Windows 7 you (will) actually buy, and we can send you a link to the copy of the DVD for this version of Windows 7.

  To purchase a copy of Windows 7 you can check Newegg.com, here: http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&DEPA=0&Order=BESTMATCH&Description=windows+7&N=-1&isNodeId=1 .

  I hope that answers your question.

  Kind regards

  BearPup

• Satellite U200 - sound does not work after the installation of Win8.1

  Hello guys,.

  I have some old Satellite U200-165. I installed windows 8.1 Enterprise assessment successfully after that I changed the hard drive SSD, but the sound does not work. Windows showing that his work perfectly, but it does not come out.

  An advise please.

  Satellite U200 is a pretty old and not supported for Win8 or Win8.1 machine. I think that we have no report on this forum how this old piece of equipment works with Win8.

  If the sound card is properly installed, have you checked all the sound settings?
  I presume that the same problem is with a headset, right?

• Problem: My computer hangs and does not restart after the installation of MS Update KB2479628.

  Tuesday February 11 I turned my hp Compaq nx7300 off I saw that she was installing updates I thought that nothing of what I had set to automatic updates. On Wedndesday that I have tried to re - turn on my laptop it installed updates. I got a black screen with white writing. The laptop then ran restoration of boot, but he was not able to repair itself and turns off. I tried to turn it back on a few times that I was in total disbelief that a MS Update would do this to my computer, it still does not.

  I tried to start the computer in safe mode, but it does not work.

  I tried to do a system restore but evertime I tried it there was an error, I tried all eight restore points but all back "an unspecified error occurred during system 0x800700b7 restore.

  "In restoration of start I clicked on ' view diagnostic and repair details" it said all tests have been performed with success, but at the bottom it says ' root cause found - boot critical file D:\Windows\system32\ntkrnlpa.exe is corrupt.

  I had to reinstall windows 7 pro three times so far and have now developed to the point that it is KB2479628 update of MS that is causing the problem. I the have not installed this time and have had updates to the manual

  What can I do about this problem, I spent at least 20 hours on this problem now, and looking for the many other forum of people seem to have similar problems. I'm worried that KB2479628 will settle by accident when I want to install some other updates?

  My computer laptop originally had Vista Business top but has been upgraded to Windows 7 32 bit, clean install, I use Microsoft Security Essentials, I've never had installed norton or macafee.

  Thank you very much for all your time and your help is greatly appreciated, I'm sure I'll be at the time when SP1 is available.

  Until then your your :-)

• Internet does not work after the installation of updates

  From 2 updates (KB972270 and KB955759) internet wouldn't work once these updates have been installed.  I removed the updates and turned off the automatic update feature.  Periodically, I would try again but the same result.  I'm now 16 updates to download and I tried last night, but once again not Internet... even after manually loading all, but updates 2 above.  I want to keep my computer up to date but can't seem to solve the problem of the internet.  Is there a problem with the Microsoft updates?  How can I fix the problem, so I can update my computer?

  Open Internet Explorer (only) to http://windowsupdate.microsoft.com GOLD http://update.microsoft.com/microsoftupdate . Select CUSTOM and scan: are any of the updates other than KB972270 and offered KB955759?

  NB: If an update of root certificates is listed under the category of optional software updates on the left side of the scan results window, install it to enjoy greater security of IE8.

  If you choose not to install KB955759, you run difficulty he #50326 in http://support.microsoft.com/kb/954157 to protect your computer.

  Note: I'm not going to tell you it's OK do not install a critical security update. If IE crashes after installation of an update, something is wrong with your computer (e.g., an infection, one or several incompatible modules of the IE; a "horked" install IE8).

  If you install a security update & have a problem...
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Libretto W100 - 10 d - 3 G Module does not work after the installation of the system

  Hello

  I just reinstalled the software on my Libretto W100 - 10 d, from the internal HARD disk recovery partition recovery procedure.

  After the intervention, I have a clean booklet; all works well, except my 3 G Module is not recognized: the SW of Wireless Manager is not installed, and the 3G module does not appear in Device Manager more!

  It seems that the 3G module is not installed! of course before the recovery procedure, it worked like a charm!

  I suspect something has disabled the 3G module (usually something similar happens in the BIOS...)

  Can someone help me so that the 3G module working in return?

  Of many tanks and best regards

  Hello

  Have you checked the settings in the BIOS?
  To be honest I'm not quite sure if BIOS contains separate power switch or option Wlan 3G but you must absolutely check it m.

  To access the BIOS press ESC and F1
  Where would the BIOS contains 3 G or Wlan option, make sure that this option is enabled.

  Then visit the Toshiba UE driver page and download and install the Ericsson 3 G driver
  This is the driver for the 3G module.

• Qosmio X 500-webcam does not work after the installation of W7 Ultimate

  Hello
  I have a big problem.

  First: Sorry English is not my native language and I can't find a German support forum here.

  I have a new laptop Qosmio X 500, and I installed Windows 7 Ultimate 64 - Bit of news. I try to install all the drivers from the site Web of Toshiba, but it't really didn't work with the Webcam.
  I can't install it. It works once, I can install the "Web camera Application", but he says that it cannot find the web camera. Then, I uninstalled the "Web camera Application" and try to installed new.
  Who does not work now too. He asked: "if I'm going to delete all" but I delete them all! And I can not install the "tinstall.exe" I don't know what it is, but it is from the WebCam Driver of Toshiba.

  In the Device Manager there is no Web camera too.

  All means what? Is the WebCam broken? I've had the laptop for 5 days.

  Greetings

  Hello

  Qosmio X 500 shipped with Win7 64 bit OS so I really put t understand why you use clean install of the OS. Ultimate version is so important to you?

  At first, I must say that the Qosmio X 500 is more complicated for laptop for any new OS install and all things must be installed in the correct order.

  But back to your questions:
  > All means what?
  It probably means that you are missing something
  > Is the WebCam broken?
  Probably not. Install original OS, you got with your laptop and test the features of cam again.
  > I've had the laptop for 5 days.
  This statement is not relevant at all. If you do something yourself and it works not that's problem and even your laptop is 5 hours old.

  What now? is original OS install an option for you?
  You have created recovery DVDs until you have installed the clean version of Win7? I hope because without DVD, you won't be able to install it using the option of HARD drive recovery.