Windows XP does not start. Can I boot Windows from a disk so that I can recover the data?

Similar Questions

• flash drive crashed; Formatt required; any way I can recover the data?

  I downloaded a file to my USB key quickbooks.

  The first time that I saved the file to the flash drive errored out in the middle of recording.

  When I tried to access the file on the flash drive, I was told the drive needed to be formatted.

  Is it possible to recover the data on the flash drive?

  Thank you.

  Hi RexSweetwood,

  The problem that you are experiencing is very common, it is often caused by the pluging and unpluging the flash hard drive. In this case, you probably can't get your data from the flash drive, however, if the data in the flash player are very important, you can contact the manufacturer of your flash drive to ask if you can recover the data.

  In other words, in this case, you can easily get your fixed USB (the manufacturer can do it), but you probably cannot recover the data.

  Good luck to you.

  Gavin

• Y50 Lenovo does not start on first boot

  Hi, I noticed that my laptop does not start at the first power on. A press on the Start button, Lenovo image shows, but after a few seconds the power turn off. I need to press the power button and restart the laptop without problem.
  Anyone else having the same problem?

  Good news... It seems that the problem is solved with a restoration of the default bios...

• Cisco Nexus 5596 does not start after NX-OS upgraded from 5.1.3.N1.1 to 6.0.2.N2.5 [CSCun66310]

  Hello friends,

  I want just to save your valuable time & effort, while Nexus 5596 upgrades so I wanted to share some useful information that you can have a quick glance before your Cisco Nexus 5596 device updates.

  Recently, I ran into trouble when upgarding 5596 Nexus data center switch does not boot and after investigation of the Cisco TAC it comes out to be Bug described below.

  https://Tools.Cisco.com/bugsearch/bug/CSCun66310/?reffering_site=dumpcr

  My way of upgrading the device was: 5.1 (3) (1) to 6.0 (2) N2 N1 (5).

  As this upgarde involves an upgrade of Bios and power purposes, I had some doubts to get this properly upgraded, but he had more twist involved in this upgrade I got to know after contacting Cisco TAC for my death 5596 Nexus device and got info if you have version impacted in your Nexus 5596 device and you plan to upgrade , then you migh RUN in this serious BUG aftre which device will not come at all and only Option left is to replace with device of RMA.

  Material affected PID versions Versions updated

  UCS-FI-6296UP                                            1.0                                       1.1

  N5K-C5596UP                                              1.0                                        1.1

  N5K-C5596T                                                 1.1                                         1.2

  You can check with hardware version command from your device below.

  5596 # display sprom sup | H/W Inc.

  H/W Version: 1.1

  So please be careful when you plan your Nexus 5596 update and check over things that this Bug is not present anywhere in the docuemntations upgrade unfortunately.

  Hope this will help and save valuable time of a person.

  This bug affected me. Before upgrade you the equipment, to track:

  It's procedure, there will be no allocation to apply.
  Is attached to the case of the dplugin for each NXOS, check out the name associated with each version.
   
   
  Step 1
   
  -------------------------------
  Copy the file dplugin and update, load Plugin
  Copy the ucd - update.tar to the bootflash
  Copy the debug plugin into the bootflash
  Load the image via the load control
   
   
  Note You can access the command line without leaving the plugin to debug via command vsh
   
  Example:
   
  n5K-1 # dir bootflash:. grep debug
  3023275 23 Jan 15:28:48 2013 ucd - update.tar
  283423 23 Jan 15:12:28 2013 nuova-or-dplug - mzg.5.2.1.N1.5.bin
  n5K-1 # load bootflash:nuova - or - dplug - mzg.5.2.1.N1.5.bin
  Loading of plugin version 5.2(3a)
  ###############################################################
  WARNING: debug plugin is for engineering for internal use only!
  For reasons of security, plugin image has been removed.
  ###############################################################
  Debugging properly load-plugin!
  Linux (Debug) #.
   
   
   
  Step 2
   
  -------------------------------
  After you load the dplugin file into NX - OS, please follow the steps to update the module of TI.
   
   
  Copy the ucd - update.tar of bootflash to the tmp directory and unzip the file
   
  Linux (Debug) # cp /bootflash/ucd-update.tar/tmp
   
  Linux (Debug) # cd /tmp/
   
  Linux (Debug) # tar - xvf ucd - update.tar
   
  UCD.bin
   
  Address_91_A.csv
   
  Address_92_A.csv
   
  Linux (Debug) #.
   
  Step 2
   
  ----------------------------------
   
  Run the ucd.bin file:
   
  Linux (Debug) #./ucd.bin
   
   
   
  You will see the prompt on the version 1.1 update.
   
  --------------------------------------------------
   
  principal: correctly upgraded TI inst 2 to version 5.
   
  New SPROM HW version 1.1. Charging must reflect in 'show the sprom' output.
   
  Release Linux (Debug) #.

  The problem is how to get the plugin. Only Cisco can provide this.

• Acer Aspire E1 471 does not start. "no boot device, insert the boot disk and press any key".

  Acer Aspire E1 471. 8 64-bit Windows.

  It does not seem to recognize any boot device.

  Already tried:

  -F2 for configuration of the bios F9 to restore the default settings, F10 to save and exit and restart.

  -boot from usb, dvd... the screen turns black after the screening.

  -forcing safe mode or windows recovery screen (System Restore, auto repair, cmd, etc) the screen goes black, too and after about 20 minutes. the blue screen with the unhappy face appears (pc must be restarted)

  Any suggestions?

  Hi FerminSampo,

  We will try to repair the startup entries, I suggest you follow these steps and try to solve the problem of Windows 8 start.

  a. starting from hirens CD.

  b. try these commands from the command prompt.

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /rebuildbcd

  c. restart the computer and check if the problem persists.

• Movement of keyframes does not - I can see the values change, but nothing happens in the monitor!

  I'm having a nightmare trying to program in a few Motion keyframes to change the position of an element in my program monitor.

  I created the image key to assign the value of the position of an element in the timeline - I want the clip to move toward the Center on the side of the screen. I followed the guidelines and can see the keyframe symbols appear in the view of key images marking the beginning and the end of the change. What is strange, is that when I press play, I can see values changing in the effect controls panel - but nothing really happens in the clip! The clip in question has a silhouette figure, that I created using images of the figure against a green screen, which has then been hidden. I then applied a track matte key to the below item to fill the silhouette with footage - this has something to do with my animation does not?

  I checked to assure that I do apply keyframes for the clip, checked parameters interpolation of keyframes of & all seems in order. I'm new to first, & I apologize if I've properly referenced the different tools or windows - but I hope you get the idea. I looked online but can't find someone reporting a similar issue, that is certainly a first when you are working with such a popular program. I hope that it is something stupid and can be easily solved.

  Can someone tell me why the keyframes, I could, & can change the clip plays, are not actually affecting the clip at all? Any help would be greatly appreciated.

  I realized after the announcement that if I applied the keyframe to the matte rather than the silhouette clip keyframes of the movement worked. Thanks for the advice so guys!

• My video/cursor does not start if I call it from a script

  I'm new to the TIARA. So, I created a graphic interface that loads a video and a curve in tiara and is supposed to play these sync, but will play the curve or the video. I added a button to test the function of reading as described in help tiara, but it won't play either.

  Void Button1_EventClick()
  
  This Dim: Set the Button1 =
  
  	Dim oMySheet: Set oMySheet = View.ActiveSheet
  
  	oMySheet.ActiveArea.DisplayObjType = 'Video '.
  
  	oMySheet.ActiveArea.DisplayObj.FileName = "D:\PathToMyVideo\myvideo.avi".
  
  	oMySheet.Cursor.XRangeMode = "automatic".
  
  	Call oMySheet.Cursor.GotoStart
  
  	Call WndOpen ("VIEW")
  
  	Call oMySheet.Cursor.Play (FALSE)
  
  End Sub
  

  What else I must hold account before you can start a script slider?

  Hi Lucas,.

  Thank you for the files SUDialog and script - with them I was able to reproduce immediately the effect you described.  I found that the problem goes away when I call your SUDialog as a modeless dialog box instead of as a regular modal SUDialog.  I think that it is quite possible that you prefer to have a modeless SUDialog, so I join you edited SOUTH and VBS files to call the dialog box so that it persists even after the end of the calling VBScript file.

  If you decide that you need a modal SUDialog, I will continue to investigate this matter and see if we can avoid the problem with a modal dialog box.

  See you soon,.

  Brad Turpin

  Tiara Product Support Engineer
  National Instruments

• WINDOWS does not start \EFI\MICROSOFT\BOOT\BCD status 0 x 0000185

  I just got a new laptop and I love it, but I went to restart it and the samsung logo stay up, and finally, it throws an error saying

  Windows doesn't load due to hardware or software upgrade recent...
  file \EFI\MICROSOFT\BOOT\BCD
  status 0c 0000185
  Info configuration of your pc startup data is missing or contains errors
  the computer tells me to insert the windows disc 8
  I don't have a windows disc 8, I got the laptop a month ago but it is pre-loaded with windows 8... help a brother out!

  Curiously, I tried all the patches when I got this error efi unawares. I have a dual boot using win 7 as my first and win 10 on another drive.

  I downloaded a Boot Manager after you saw that somehow the drive letter had changed when I decided to check the start state. I don't have this problem before the last update.

  It changed back and everything was fine.

• Firefox does not start, can't read configuration.

  My friend has downloaded an adblocker as it became ad popups all the time in Firefox. After that, she can no longer load Firefox so can't a safe departure or other patches. She gets an error indicating that the configuration cannot be read (can not give a literal translation that its system is in German). What can we do?

  Hello, the solution probably depends on what means the error exactly - in which case it refers to a configuration file missing (Konfigurationsdatei), and to contact the administrator on this subject, probably a clean reinstall will help:

  • Download the Setup file of firefox full of https://www.mozilla.org/en-US/firefox/all/
  • Uninstall from firefox on the machine
  • Manually remove any other files in the folder of the firefox program, which is usually in C:\Program Files (x 86) \Mozilla Firefox\
  • reinstall firefox

  If the error message is referring to a missing profile however, please see How to run Firefox when your profile is missing or inaccessible

• Windows Vista does not start. I can just buy the upgrade to Windows 7 to fix this or do I have to purchase the full version of Windows 7?

  update helps... Difficulty helps lol

  I have vista Home premium, but does not start it tells me to put my disk installation and repair process. can I buy windows7 upgrade or should I buy the full version, I'm not going to do...? I got my pc checked thourghly and everything is running perfect

  Please use the Vista system repair and recovery forum to fix your departure upward.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system?page=1&tab=all

  Yes, as long as Vista is still installed on the hard drive you can use a copy of Windows 7 upgrade to upgrade your computer but you will need to boot the computer with the Windows 7 dvd and perform a custom installation.  Which will remove all your programs and data so there will be very practical backups.

  The best option is to repair Vista first.

  Before dismiss you the idea of buying a copy of the full license of Windows 7, remember that it would be transferable to a new computer much more easily that an upgrade copy is.

• Windows XP restarts all the time; does not start mode safe mode and last known Configuration does not work either

  Hello! Recently, I installed Wubiand appreciates well. However, a few days ago, when I tried to boot XP on my netbook (EEE PC 1005hab), it restarts just constantly return to the selection screen of the BONES. I tried Safe Mode and last good Configuration known with anything will do. What should I do now? Ubuntu has not stopped working suddenly, so I can't access my data.

  I don't have to have a Windows XP CD, there is something weird Asus recovery instead. In addition, it is a netbook so I don't have an optical drive to run the recovery CD. I'm doing a Livecd of Linux USB so I can back up my data... but I can do but reinstall at this point?

  Thank you.

  The afflicted system has a working CD/DVD drive (even an external).

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu, it has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start pressing the F8 key with more urgency (earlier and more frequently) until you see disable automatic restarts on system failure, and then select it.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Windows xp does not start in safe mode how to

  Computer says windows did not start successfully and does not start in safe mode, will not restart, do not go back to the last known good configuration

  When you choose to start safe mode, which is the last thing you see on the screen?

  When you arrive at the menu of Boot Options Advanced F8, you need to choose in this menu, the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

  You won't get past step 1 of KB307654 or install the Recovery Console or do a repair install without a real XP bootable installation CD that matches your currently installed Service Pack (very unlikely).

  You have a real installation CD bootable XP that corresponds to your currently installed Service Pack?

• Creation of recovery disks when Windows 7 does not start

  My sister's hard drive is in imminent failure on HP G60-535DX laptop. Windows 7 does not start. I need to make recovery disks. I was able to save info goes into System Recovery Manager, but I don't see an option to create recovery disks to install the system on a replacement hard drive. Is it possible to create diskettes or order?

  Thank you

  Nanila51

  Hello

  You can order a set of replacement recovery disks using the link below.

  http://support.HP.com/us-en/document/c00810334

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• WebSigner Service does not start, Windows 7

  Hey Experts,.

  I'm trying to follow the guide on the protection of the PerstentObjects using ControlledAccess.

  I HAV created and imported one. Record MAIN in my project and chosen the class to be protected.

  Now, my problem arises when I try to sign the Bill. Sign Tool told me that my custom key is not registered.

  How can I register it? Do I need a. File CSI to do this and if so, how to generate it? Thank you.

  UPDATE: I just realized than that one possible reason is that the WebSigner service does not start. When I look in servcies.msc it just gets stuck at the start.

  Any ideas on how to start? Thank you.

  You can manually create and install your keys using the administration tool. The webservice is only if you can connect using the signature tool. WebService not auto start on windows 7 because it does not interactive services. There is a setting that you can change for this purpose and there a small dialog box will appear asking to connect to start the service whenever you start. Just google for interactive services on windows 7.

• Firefox does not start - claims that it is already open

  Firefox does not start. He claims to be already running, but that doesn't seem to be the case.

  I tried to create a new user profile, but when I try to open Firefox now, the menu "choose user profile". I tried the new profile and they old, and both give the same error message. "Firefox is unable to use the"Default user"profile because it is in use. To continue, close the Runspace of Firefox or choose a different profile. »

  There is an entry for firefox.exe in the menu of "details" to my task manager and nowhere else. When I try to put an end to this task, I get the following error: "the operation could not be performed - access denied."

  Due to some troubleshooting research, I tried to delete the parent.lock my profile folder, but I get this error: "the action cannot be completed because the file is opened in Firefox."

  I tried to transfer my bookmarks and preferences from Firefox to Chrome, but I had a similar error suggesting that Firefox was already open and I have to close first.

  I also turned off my computer and uninstalled and reinstalled Firefox several times.

  I'd really rather not lose all my bookmarks Firefox, modules, and preferences. I also prefer to use Firefox for Chrome, so if anyone can help me I would really appreciate it. I don't know what else to try.

  My PC runs Windows 10, incidentally.

  Try to delete the parent.lock file in the Firefox profile folder.

  • C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\.
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  See:

  • http://KB.mozillazine.org/Profile_in_use
  • https://support.Mozilla.org/KB/Firefox+is+already+running+but+is+not+responding

  What security software do you have?

  Try to create a new shortcut on the desktop Firefox and maybe to reinstall Firefox via a clean reinstall (i.e. remove the Firefox program folder).

  If you cannot remove the Firefox program folder and then try to rename this file to "Mozilla Firefox.old".

  • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
  • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) to see if that helps.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/
  • http://www.7tutorials.com/4-ways-boot-safe-mode-Windows-10