Windows xp does not start, I can't even in safe mode. I Mindprint just a black screen with the mouse arrow. What can I do

Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

Hello

1 did you changes to the computer before the show?

You can try the troubleshooting provided in the link below steps to fix the problem.

Computer stops responding with a black screen when you start Windows XP

http://support.Microsoft.com/kb/314503

Tags: Windows

Similar Questions

  • Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

    Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

    You have all the features non-essential related to the machine?
    Have you installed a new hardware or software recently?

    Try to do a repair install and see if it corrects the problem.

    How to perform a Windows XP repair install

  • Windows 7 does not load, is sitting on a black screen with the mouse arrow.

    I loaded several times and even used the repair option still does not load past this screen.  Looks like it should be on the page of actual windows, but nothing.  Have to restart the computer at this point.  He will continue to try to reinstall windows 7... cannot use same cause recovery F10 it says something about a partition... I have no computer!  What is going on???

    Hi all

    Thanks for posting. If I understand your messages is correctly appears that your facility will not start even to load. If this is the case, then you probably bad media. I would either re - burn your DVDs at a slower speed. If you got your DVD with a company I contact the seller and request additional media.

    I hope this helps!

    Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Windows XP does not start. Can I boot Windows from a disk so that I can recover the data?

    Windows XP does not start. Can I boot Windows from a disk so that I can recover the data? This should be a CD because it doesn't have a floppy disk on my laptop drive. It is maybe that my hard drive has begun to fail and therefore cannot locate XP startup files. I can not start using one of the other methods of starting for example. Safe mode. If I can recover the data, I can then reload Windows and check the surface of the disc etc etc. Thank you all for your comments. Steve

    Lately, I'm leaning toward the Hiren's BootCD you can download here:

    http://www.hirensbootcd.NET/

    On the left, click on download, scroll down, choose the most recent version

    The download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

    Direct HTTP mirror + Torrent, Torrent Magnet

    Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

    The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract theHirens.BootCD.ISO file that will be used to create your new bootable CD.

    Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

    File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

    If you need a simple and CD burning, this is a free software popular software:

    http://www.ImgBurn.com/

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your new bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.
    These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.

    It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.  You will feel at home.

    Using the Mini XP, you can access the Internet, maneuver around your system, copy files, replace the files, run the scans for malware, etc.  There are dozens of free and useful tools included in the CD that can be used to repair your system, or copy files to another device such as a USB device or an external drive if drop in trying to repair your system.

    If you want to see if you can fix your system, describe what is happening when you try to start and to answer these questions:

    What is your system brand and model?

    What is your Version of XP and the Service Pack?

    Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

    You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  • Computer starts up, it stops at a black screen with the mouse icon (which moves around as usual)

    When I start my laptop, it goes through all the loading screens (Windows Vista etc.) then sticks to a black screen with the mouse icon... I somehow managed to try a restore of the system by a few points, but they all failed a moment I can't even find this option.

    Hi Peter,

    1. have you done any recent hardware or software changes to the computer before the show?

    2. with what code error did system restore fail?

    Method 1:

    Try to start the computer in safe mode and check if the problem persists,

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Method 2:

    Try and perform a startup repair and check if that helps you.

    Startup Repair: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  • Windows Vista starts with a black screen with the mouse cursor

    Hello

    I bought a new Toshiba laptop with OS Windows Vista from Best Buy. At time of purchse that Best Buy does not give me the Vista OS software, they said that the operating system is already installed in the laptop.

    Now, after a year, I have problems with the laptop. The Vista starts with a black screen with a mouse cursor. Before writing this issue, I searched some tips to solve the problem as

    (1) by pressing F8 while the computer is on and select it the option "last good known Configuration (Advanced) option." but it didn't work.

    (2) by pressing F8 when the computer is turned on, then turn on the option 'System repair Option', it did not work.

    (3) by pressing F8 when the computer is turned on, and then select the option "" safe mode / Normal mode option "Unfortunately she also did not work."

    Could you get it someone please let me know how I can solve this problem.

    Thanks in advance

    If Safe Mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a startup repair, etc.:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Also ask them if it is possible to make the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you're up a new drunning.

    They will tell you how to do this.

    Every computer manufacturer has their own way of making recovery disk/s.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows Vista starts with only a black screen with the mouse pointer.

    Saturday, 02/27/10, I left my laptop (Dell Inspiron 1405 E) because I used Studio to produce a couple of videos.  When I got up in the morning, he himself had closed.  I tried to put on normally, and he said: recovery error windows, then on lists: Launch Startup Repair tool and start windows normally.  I tried to do a repair, but it just comes back to the same screen.  When I try to boot normally, it shows the progress on the background as usual bar, but then he comes up to a black screen with a mouse pointer.  When I run one of the many diagnostic tests, it is said that the BIOS cannot find the operating system loader.  I'm pretty adept at computers, but nothing I've tried before reinstalling Vista works.  I have files that I need to keep it on the computer, and only a few of them are saved.  Please help me soon, as I need for my school musical production on Thursday.

    Hello

    You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
    -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
    then right click on the device and UNINSTALL - REBOOT.

    Another method to try to get to the desktop (try in normal Windows Mode without failure)
    is CTRL + ALT + DEL and the processes tab find EXPLORER.exe and END PROCESS on it.
    then on the tab Applications - lower right - new task - the type in EXPLORER.exe. Safe mode is
    accessible by tapping F8 as you start several times.

    First check this thread in case it is simple and if not to come back to this thread.

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

    Black screen problems are extremely difficult to repair and all hotfix is usually a hit or miss
    base. That there is no information on a black screen as there is just a blue screen
    adds to the difficulty. Often using a restore point or Startup Repair will have no effect.
    You can try a google to see the proposed repairs, whom some have worked however these
    cover a wide field of efforts.

    Here's a video of one of them.

    http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

    Here's another fix
    http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

    You have a Vista disk? You can try restoring the system to it. If you do not have the
    discs, your system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can create a recovery disc or use someone even version (making the system
    Restoration, it must only be bootable).

    How to create a Vista recovery disk
    http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

    ------------------------------------------------

    These require the correct Vista discs since you can not start safe mode.

    Try the Startup Repair tool-

    This tells you how to access the System Recovery Options and/or with a Vista disk
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    -----------------------------------------------

    Here are a few Google searches where many have found different solutions:

    Vista black screen - check that a 1st
    http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

    Vista black screen Solution
    http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

    Vista black screen Fix
    http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

    -----------------------------------------------

    If necessary and you can access all ordinary Windows.

    You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
    (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
    3.

    You can use another DVD that aren't copy protected but you you need to own
    Product key.

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    If nothing works, you can do a repair installation which should save the data but you will be
    Maybe reinstall programs. It also requires the correct Vista disks especially for OEM
    versions. You will need to know your product Code.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    How to perform a repair for Vista Installation
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    ---------------------------------------------------------------------------

    Another method that works sometimes: at the command prompt, type of Vista startup disk:
    (type in a single line or copy / paste a line at a time and then press enter - do not type)
    parenthesis or "BOLD"
    )

    c:

    cd\

    CD c:\Windows\System32\winevt (there is a space between cd and C :)

    Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

    RESTART Windows

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • CHKDSK replaced the security id not valid with default security id & showed a black screen with the mouse cursor

    Hi you

    After running CHKDSK, it said replacement of the security id invalid with the default security id in windows 7 64 bit

    After that it's over, he just showed a black screen with the mobile mouse cursor!

    I searched but did not find the answers on Microsoft

    Please help me

    Hello

    Thanks for posting your question on the Microsoft community.

    We need more information about the issue so that we can help you better.

    Check the drive run at Windows startup?

    Thank you for details on the issue.

    This message is displayed because the specified file has an invalid security ID. Each file on a NTFS or FAT volume has security what ID assigned. The ID assigned to the data file does not match the ID assigned to the security data stream file ($SDS). There is a mismatch of Ids. CHKDSK replaced the invalid security ID.

    Black screen with cursor may appear due to corrupted display driver.

    I suggest you try using the steps described in this article and check.
    Reference:
    Why my screen is black when I start Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

    Important notes:
    Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

    Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Windows 7 Pro 64 bit black screen with the mouse only on startup and nothing else

    Hi there, Windows 7 system recently froze on me when I tried to move a large file on a USB hard drive. I didn't was not able to close the file so I decided to stop my PC with the regular start-> Shut Down.

    Now when I try to turn on my computer, after the "starting Windows" and Microsoft report goes to a pure black screen with just a (mobile) mouse cursor, not keyboard commands or click right work (eg. ctrl + alt + delete does nothing).

    I tried to start in safe mode, safe mode with network, they do the same thing after the "Starting Windows" screen. Tried to boot with my Windows 7 Pro 64-bit installation disk so and entered commissioning repair - no problem. Tried system restore and it went successfully, however after clicking restart is again the same thing!

    It's really making me crazy, could someone please help me? I really want to reinstall Windows and lost my files (since I can't even in a form any Windows Installer interface I'm not able to do a repair).

    Thanks in advance for your suggestions!

    I will proceed to a re - install now, thanks anyway for your efforts

  • Windows 7 starts, but goes to a black screen with the mouse before the Welcome screen

    Windows 7 starts up goes to the "starting windows" logo screen, then before you get to the homepage for a connection, becomes black and be left with just a cursor. tried to restart and start up repair but I have no way to access because of safe mode is the same thing then. What is the best way to fix this without losing all the stuff on my computer for work.

    Hello

    Remove all connected devices (except the mouse and keyboard if it is a desktop computer) to the computer and then try to start and check what is happening.

    You can try to boot from the installation disc, and then check if you are able to perform a startup repair, or run the Windows Memory Diagnostic tool.

    Follow the link below.

    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    See also:

    http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

    http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows 8 black screen with the mouse on the screen.

    Hi, my laptop windows 8, it's a few months old today when I try to start it shows the Acer splash screen then the screen goes black with just the mouse pointer projection. I can move the pointer on the screen, but windows does not load. Help please.

    I'm having a similar problem with an emachine. Install a fine and worked correctly after installing some programs. Question has developed after the most recent upgrade. I managed to go back to my previous restore point and it works, but have a feeling, upgrades to the computer again once I have the problem again.

  • Windows VISTA does not start - shows a green bar horizontal scrolling forever, safe mode stops at crcdisk.sys

    Windows Vista does not start.  It shows the horizontal scrolling green bar with microsoft (c) and then goes to a black screen with the mouse arrow that moves. Start in safe mode loads the drivers to the extent of the crcdisk.sys but meet once again at the black screen with the mouse arrow.   Have not the SATA drives connected.  Impossible to get to the command prompt to delete all files.  No work from safe mode.  Restore computer does not work.  I have looked at other posts regarding the renaming/deleting files, but cannot get to the command prompt to resolve this problem.  The computer is less than 2 years.

    Toshiba Satellite A205-S5831, dual processor running.  Running Windows Vista BASIC.  Hard drive seems to work, lighting, well working properly, no error at startup.  No perifpherals or a mouse, or a USB attached.  Disabling USB does not boot.

    Can someone give a help?

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

    There is no Vista free download legal available.

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > find the latest Vista drivers for it > download/install the

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows 7 black screen with the cursor on the linen. 3-5 minutes long

    I have an Elitebook 8740w HP with Windows 7 which takes longer than 5 minutes to start. It will sit on a black screen with the mouse (which moves), until finally, it loads the login screen. The netsvcs group takes up to 900 MB + of ram and possibly the computer overheating? and turns off immediately. I think it may be issued a driver. This is the last log to start the laptop. The machine works fine in safe mode.

    In addition, no major change was to the PC.

    Service Pack 1 4 29 2015 14:44:38.610
    Loaded driver \SystemRoot\system32\ntoskrnl.exe
    Loaded driver \SystemRoot\system32\hal.dll
    Loaded driver \SystemRoot\system32\kdcom.dll
    Loaded driver \SystemRoot\system32\mcupdate_GenuineIntel.dll
    Loaded driver \SystemRoot\system32\PSHED.dll
    Loaded driver \SystemRoot\system32\CLFS. SYS
    Loaded driver \SystemRoot\system32\CI.dll
    Loaded driver \SystemRoot\system32\drivers\Wdf01000.sys
    Loaded driver \SystemRoot\system32\drivers\WDFLDR. SYS
    Loaded driver \SystemRoot\system32\drivers\ACPI.sys
    Loaded driver \SystemRoot\system32\drivers\WMILIB. SYS
    Loaded driver \SystemRoot\system32\drivers\msisadrv.sys
    Loaded driver \SystemRoot\system32\drivers\pci.sys
    Loaded driver \SystemRoot\system32\drivers\vdrvroot.sys
    Loaded driver \SystemRoot\system32\drivers\isapnp.sys
    Loaded driver \SystemRoot\system32\drivers\mpio.sys
    Loaded driver \SystemRoot\System32\drivers\partmgr.sys
    Loaded driver \SystemRoot\system32\DRIVERS\compbatt.sys
    Loaded driver \SystemRoot\system32\DRIVERS\BATTC. SYS
    Loaded driver \SystemRoot\system32\drivers\volmgr.sys
    Loaded driver \SystemRoot\System32\drivers\volmgrx.sys
    Loaded driver \SystemRoot\system32\drivers\intelide.sys
    Loaded driver \SystemRoot\system32\drivers\PCIIDEX. SYS
    Loaded driver \SystemRoot\system32\drivers\pciide.sys
    Loaded driver \SystemRoot\system32\drivers\aliide.sys
    Loaded driver \SystemRoot\system32\drivers\amdide.sys
    Loaded driver \SystemRoot\system32\drivers\cmdide.sys
    Loaded driver \SystemRoot\System32\drivers\mountmgr.sys
    Loaded driver \SystemRoot\system32\drivers\msdsm.sys
    Loaded driver \SystemRoot\system32\drivers\nvraid.sys
    Loaded driver \SystemRoot\system32\drivers\CLASSPNP. SYS
    Loaded driver \SystemRoot\system32\drivers\viaide.sys
    Loaded driver \SystemRoot\system32\drivers\vmbus.sys
    Loaded driver \SystemRoot\system32\drivers\winhv.sys
    Loaded driver \SystemRoot\system32\drivers\iaStorV.sys
    Loaded driver \SystemRoot\system32\DRIVERS\iaStor.sys
    Loaded driver \SystemRoot\system32\drivers\atapi.sys
    Loaded driver \SystemRoot\system32\drivers\ataport. SYS
    Loaded driver \SystemRoot\system32\DRIVERS\lsi_sas.sys
    Loaded driver \SystemRoot\system32\DRIVERS\storport.sys
    Loaded driver \SystemRoot\system32\drivers\msahci.sys
    Loaded driver \SystemRoot\system32\drivers\HpSAMD.sys
    Loaded driver \SystemRoot\system32\DRIVERS\adp94xx.sys
    Loaded driver \SystemRoot\system32\DRIVERS\adpahci.sys
    Loaded driver \SystemRoot\system32\DRIVERS\adpu320.sys
    Loaded driver \SystemRoot\system32\drivers\amdsata.sys
    Loaded driver \SystemRoot\system32\DRIVERS\amdsbs.sys
    Loaded driver \SystemRoot\system32\drivers\amdxata.sys
    Loaded driver \SystemRoot\system32\DRIVERS\arc.sys
    Loaded driver \SystemRoot\system32\DRIVERS\arcsas.sys
    Loaded driver \SystemRoot\system32\DRIVERS\elxstor.sys
    Loaded driver \SystemRoot\system32\DRIVERS\iirsp.sys
    Loaded driver \SystemRoot\system32\DRIVERS\lsi_fc.sys
    Loaded driver \SystemRoot\system32\DRIVERS\lsi_sas2.sys
    Loaded driver \SystemRoot\system32\DRIVERS\lsi_scsi.sys
    Loaded driver \SystemRoot\system32\DRIVERS\megasas.sys
    Loaded driver \SystemRoot\system32\DRIVERS\MegaSR.sys
    Loaded driver \SystemRoot\system32\DRIVERS\nfrd960.sys
    Loaded driver \SystemRoot\system32\drivers\nvstor.sys
    Loaded driver \SystemRoot\system32\DRIVERS\ql2300.sys
    Loaded driver \SystemRoot\system32\DRIVERS\ql40xx.sys
    Loaded driver \SystemRoot\system32\DRIVERS\SiSRaid2.sys
    Loaded driver \SystemRoot\system32\DRIVERS\sisraid4.sys
    Loaded driver \SystemRoot\system32\DRIVERS\stexstor.sys
    Loaded driver \SystemRoot\system32\DRIVERS\vsmraid.sys
    Loaded driver \SystemRoot\System32\Drivers\SbAlg.sys
    Loaded driver \SystemRoot\system32\drivers\fltmgr.sys
    Loaded driver \SystemRoot\system32\drivers\fileinfo.sys
    Loaded driver \SystemRoot\System32\Drivers\SbFsLock.sys
    Loaded driver \SystemRoot\system32\DRIVERS\avc3.sys
    Loaded driver \SystemRoot\system32\DRIVERS\gzflt.sys
    Loaded driver \SystemRoot\System32\Drivers\Ntfs.sys
    Loaded driver \SystemRoot\System32\Drivers\msrpc.sys
    Loaded driver \SystemRoot\System32\Drivers\ksecdd.sys
    Loaded driver \SystemRoot\System32\Drivers\cng.sys
    Loaded driver \SystemRoot\System32\drivers\pcw.sys
    Loaded driver \SystemRoot\system32\drivers\storvsc.sys
    Loaded driver \SystemRoot\System32\Drivers\Fs_Rec.sys
    Loaded driver \SystemRoot\system32\drivers\ndis.sys
    Loaded driver \SystemRoot\system32\drivers\NETIO. SYS
    Loaded driver \SystemRoot\System32\Drivers\ksecpkg.sys
    Loaded driver \SystemRoot\System32\drivers\tcpip.sys
    Loaded driver \SystemRoot\System32\drivers\fwpkclnt.sys
    Loaded driver \SystemRoot\system32\drivers\vmstorfl.sys
    Loaded driver \SystemRoot\system32\DRIVERS\wd.sys
    Loaded driver \SystemRoot\system32\drivers\volsnap.sys
    Loaded driver \SystemRoot\System32\Drivers\spldr.sys
    Loaded driver \SystemRoot\system32\drivers\sbp2port.sys
    Loaded driver \SystemRoot\System32\Drivers\SafeBoot.sys
    Loaded driver \SystemRoot\System32\drivers\rdyboost.sys
    Loaded driver \SystemRoot\System32\Drivers\mup.sys
    Loaded driver \SystemRoot\System32\drivers\hwpolicy.sys
    Loaded driver \SystemRoot\system32\DRIVERS\hpdskflt.sys
    Loaded driver \SystemRoot\System32\DRIVERS\fvevol.sys
    Loaded driver \SystemRoot\system32\DRIVERS\disk.sys
    Loaded driver \SystemRoot\system32\DRIVERS\cdrom.sys
    Loaded driver \SystemRoot\System32\Drivers\Null.SYS
    Loaded driver \SystemRoot\System32\Drivers\Beep.SYS
    Loaded driver \SystemRoot\System32\drivers\vga.sys
    Loaded driver \SystemRoot\System32\DRIVERS\RDPCDD.sys
    Loaded driver \SystemRoot\system32\drivers\rdpencdd.sys
    Loaded driver \SystemRoot\system32\drivers\rdprefmp.sys
    Loaded driver \SystemRoot\System32\Drivers\Msfs.SYS
    Loaded driver \SystemRoot\System32\Drivers\Npfs.SYS
    Did not load driver? \C:\windows\INF\bdfndisf6.sys
    Driver loaded? \C:\Program Files\Common Files\Bitdefender\Bitdefender Firewall\bdfwfpf.sys
    Loaded driver \SystemRoot\system32\DRIVERS\tdx.sys
    Loaded driver \SystemRoot\System32\DRIVERS\netbt.sys
    Loaded driver \SystemRoot\system32\drivers\afd.sys
    Loaded driver \SystemRoot\system32\drivers\ws2ifsl.sys
    Loaded driver \SystemRoot\system32\DRIVERS\wfplwf.sys
    Loaded driver \SystemRoot\system32\DRIVERS\pacer.sys
    Loaded driver \SystemRoot\system32\DRIVERS\vwififlt.sys
    Loaded driver \SystemRoot\system32\DRIVERS\netbios.sys
    Loaded driver \SystemRoot\system32\DRIVERS\serial.sys
    Loaded driver \SystemRoot\system32\DRIVERS\wanarp.sys
    Loaded driver \SystemRoot\system32\drivers\termdd.sys
    Loaded driver \SystemRoot\System32\Drivers\RsvLock.SYS
    Loaded driver \SystemRoot\system32\DRIVERS\rdbss.sys
    Loaded driver \SystemRoot\system32\drivers\nsiproxy.sys
    Loaded driver \SystemRoot\system32\drivers\mssmbios.sys
    Loaded driver \SystemRoot\System32\drivers\discache.sys
    Loaded driver \SystemRoot\System32\Drivers\fastfat. SYS
    Loaded driver \SystemRoot\System32\Drivers\dfsc.sys
    Loaded driver \SystemRoot\system32\DRIVERS\blbdrive.sys
    Loaded driver \SystemRoot\system32\DRIVERS\bdvedisk.sys
    Loaded driver \SystemRoot\system32\DRIVERS\tunnel.sys
    Loaded driver \SystemRoot\system32\DRIVERS\intelppm.sys
    Loaded driver \SystemRoot\System32\drivers\dxgkrnl.sys
    Loaded driver \SystemRoot\system32\DRIVERS\nvlddmkm.sys
    Loaded driver \SystemRoot\system32\DRIVERS\HECIx64.sys
    Loaded driver \SystemRoot\system32\DRIVERS\serenum.sys
    Loaded driver \SystemRoot\system32\DRIVERS\e1k62x64.sys
    Loaded driver \SystemRoot\system32\drivers\usbehci.sys
    Loaded driver \SystemRoot\system32\drivers\HDAudBus.sys
    Loaded driver \SystemRoot\system32\DRIVERS\Netwsw00.sys
    Loaded driver \SystemRoot\system32\DRIVERS\vwifibus.sys
    Loaded driver \SystemRoot\system32\DRIVERS\nusb3xhc.sys
    Loaded driver \SystemRoot\system32\drivers\1394ohci.sys
    Loaded driver \SystemRoot\system32\drivers\sdbus.sys
    Loaded driver \SystemRoot\system32\DRIVERS\rimmpx64.sys
    Loaded driver \SystemRoot\system32\DRIVERS\rimspx64.sys
    Loaded driver \SystemRoot\system32\DRIVERS\rixdpx64.sys
    Loaded driver \SystemRoot\system32\DRIVERS\pcmcia.sys
    Loaded driver \SystemRoot\system32\drivers\tpm.sys
    Loaded driver \SystemRoot\system32\DRIVERS\parport.sys
    Loaded driver \SystemRoot\system32\DRIVERS\i8042prt.sys
    Loaded driver \SystemRoot\system32\DRIVERS\HpqKbFiltr.sys
    Loaded driver \SystemRoot\system32\DRIVERS\kbdclass.sys
    Loaded driver \SystemRoot\system32\DRIVERS\SynTP.sys
    Loaded driver \SystemRoot\system32\DRIVERS\mouclass.sys
    Loaded driver \SystemRoot\system32\DRIVERS\GEARAspiWDM.sys
    Loaded driver \SystemRoot\system32\DRIVERS\Accelerometer.sys
    Loaded driver \SystemRoot\system32\DRIVERS\CmBatt.sys
    Loaded driver \SystemRoot\system32\drivers\wmiacpi.sys
    Loaded driver \SystemRoot\system32\DRIVERS\AMPPAL.sys
    Loaded driver \SystemRoot\system32\drivers\CompositeBus.sys
    Loaded driver \SystemRoot\system32\DRIVERS\lmimirr.sys
    Loaded driver \SystemRoot\system32\DRIVERS\AgileVpn.sys
    Loaded driver \SystemRoot\system32\DRIVERS\rasl2tp.sys
    Loaded driver \SystemRoot\system32\DRIVERS\ndistapi.sys
    Loaded driver \SystemRoot\system32\DRIVERS\ndiswan.sys
    Loaded driver \SystemRoot\system32\DRIVERS\raspppoe.sys
    Loaded driver \SystemRoot\system32\DRIVERS\raspptp.sys
    Loaded driver \SystemRoot\system32\DRIVERS\rassstp.sys
    Loaded driver \SystemRoot\system32\DRIVERS\rdpbus.sys
    Loaded driver \SystemRoot\system32\drivers\swenum.sys
    Loaded driver \SystemRoot\system32\DRIVERS\avchv.sys
    Loaded driver \SystemRoot\system32\drivers\umbus.sys
    Did not load driver \SystemRoot\System32\drivers\vga.sys
    Loaded driver \SystemRoot\system32\DRIVERS\usbhub.sys
    Loaded driver \SystemRoot\system32\DRIVERS\nusb3hub.sys
    Loaded driver \SystemRoot\system32\DRIVERS\rismcx64.sys
    Loaded driver \SystemRoot\System32\DRIVERS\scfilter.sys
    Loaded driver \SystemRoot\System32\Drivers\NDProxy.SYS
    Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
    Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
    Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
    Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
    Loaded driver \SystemRoot\system32\DRIVERS\stwrt64.sys
    Loaded driver \SystemRoot\system32\drivers\ksthunk.sys
    Loaded driver \SystemRoot\system32\DRIVERS\agrsm64.sys
    Loaded driver \SystemRoot\system32\drivers\modem.sys
    Loaded driver \SystemRoot\System32\Drivers\BTHUSB.sys
    Loaded driver \SystemRoot\system32\DRIVERS\WinUSB.sys
    Loaded driver \SystemRoot\system32\DRIVERS\usbccgp.sys
    Loaded driver \SystemRoot\system32\DRIVERS\hidusb.sys
    Loaded driver \SystemRoot\system32\DRIVERS\kbdhid.sys
    Loaded driver \SystemRoot\system32\DRIVERS\mouhid.sys
    Loaded driver \SystemRoot\system32\DRIVERS\rfcomm.sys
    Loaded driver \SystemRoot\system32\drivers\BthEnum.sys
    Loaded driver \SystemRoot\system32\DRIVERS\bthpan.sys
    Loaded driver \SystemRoot\system32\drivers\btwavdt.sys
    Loaded driver \SystemRoot\system32\drivers\btwaudio.sys
    Loaded driver \SystemRoot\system32\DRIVERS\btwl2cap.sys
    Loaded driver \SystemRoot\system32\DRIVERS\btwrchid.sys
    Loaded driver \SystemRoot\system32\DRIVERS\snp2uvc.sys
    Loaded driver \SystemRoot\system32\drivers\usbscan.sys
    Loaded driver \SystemRoot\system32\DRIVERS\usbprint.sys
    Loaded driver \SystemRoot\system32\DRIVERS\dot4usb.sys
    Loaded driver \SystemRoot\system32\DRIVERS\Dot4.sys
    Loaded driver \SystemRoot\system32\DRIVERS\Dot4Prt.sys
    Loaded driver \SystemRoot\system32\DRIVERS\monitor.sys
    Did not load driver \SystemRoot\system32\DRIVERS\gzflt.sys
    Loaded driver \SystemRoot\system32\DRIVERS\trufos.sys
    Did not load driver \SystemRoot\system32\DRIVERS\trufos.sys
    Loaded driver \SystemRoot\system32\drivers\luafv.sys
    Loaded driver \SystemRoot\system32\DRIVERS\Sftvollh.sys
    Loaded driver \SystemRoot\system32\DRIVERS\avckf.sys
    Loaded driver \SystemRoot\system32\DRIVERS\lltdio.sys
    Loaded driver \SystemRoot\system32\DRIVERS\nwifi.sys
    Loaded driver \SystemRoot\system32\DRIVERS\ndisuio.sys
    Loaded driver \SystemRoot\system32\DRIVERS\rspndr.sys
    Loaded driver \SystemRoot\system32\drivers\HTTP.sys
    Loaded driver \SystemRoot\system32\DRIVERS\vwifimp.sys
    Loaded driver \SystemRoot\system32\DRIVERS\bowser.sys
    Loaded driver \SystemRoot\System32\drivers\mpsdrv.sys
    Loaded driver \SystemRoot\system32\DRIVERS\mrxsmb.sys
    Loaded driver \SystemRoot\system32\DRIVERS\mrxsmb10.sys
    Loaded driver \SystemRoot\system32\DRIVERS\mrxsmb20.sys
    Driver loaded? \C:\Program files (x86)\LogMeIn\x64\RaInfo.sys
    Driver loaded? \C:\windows\system32\drivers\LMIRfsDriver.sys
    Loaded driver \SystemRoot\system32\drivers\peauth.sys
    Did not load driver \SystemRoot\system32\DRIVERS\rixdpe64.sys
    Loaded driver \SystemRoot\System32\Drivers\secdrv. SYS
    Loaded driver \SystemRoot\system32\DRIVERS\Sftfslh.sys
    Loaded driver \SystemRoot\system32\DRIVERS\Sftplaylh.sys
    Loaded driver \SystemRoot\System32\DRIVERS\srvnet.sys
    Loaded driver \SystemRoot\System32\drivers\tcpipreg.sys
    Loaded driver \SystemRoot\System32\DRIVERS\srv2.sys
    Loaded driver \SystemRoot\System32\DRIVERS\srv.sys
    Loaded driver \SystemRoot\system32\DRIVERS\Sftredirlh.sys
    Did not load driver \SystemRoot\System32\DRIVERS\srv.sys
    Loaded driver \SystemRoot\system32\DRIVERS\asyncmac.sys

    Thank you for your response.

    I apologize for the late reply to your message, I appreciate your effort and patience you put to solve this problem.

    You need to update the video driver.

    I suggest you perform the other steps of the same binding troubleshooting, if the matter is not resolved

    Optimize Windows performance

    http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

    CPU usage goes high, if there is some unnecessary applications loaded with the operating system.

    You can check in the Task Manager for the use of the status of processer.

    Hope the helps of information. Keep us updated on the status of the issue persists. We will be happy to help you.

  • Everytime I try to log in its just goes to a black screen with the cursor on my laptop Windows 8.

    * Original title: Admin Login

    On my laptop Windows 8, I can't connect to my admin user or even use my administrative password. Whenever I try to open a session in his will just a black screen with the cursor, and when I try to use my password it dims the screen and I can't do anything. Is there anyway that I can fix this?

    I solved the problem by resetting my laptop using the recovery mode.

  • my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem. __

    my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem.

    Try to restart your machine and pressing F8 before the spash screen Windows appears.  Choose the option "last last known good configuration".

    If this fails, you can try to repair your installation of starting for the original CD-ROM for Windows XP installation and choosing the option 'Fix' when prompted.

Maybe you are looking for

  • Cannot migrate my profile from XP to Windows 7

    I want to migrate my Firefox profile (bookmarks, passwords, latest sites visited, installed extensions/applications settings etc.) of my Win XP 64 machine to my new Win 7 machine. Firefox is updated (34.0 5) on my XP 64 and Windows 7 machines (I manu

  • iPad iOS 3 9.3 update failed and now stuck in recovery mode

    Hello When the update of iOS was released, I first downloaded iTunes may and then I press the button to update. Unfortunately, the update process is stuck with the message "Waiting for iPad ' for 30 minutes. After that I disconnected the iPad I'm not

  • HP CUSTOMER SUPPORT SUCKS!

    I called them, first the guy was very ignorant and did not listen to my reasoning at all once it was discovered that my laptop is out of warranty. I got the error Immitent HDD (predicted failure) He said that my HARD drive should be 640. I said I che

  • Group residential market, having problems with non-windows devices

    I have Windows7 Ultimate on my desktop PC. I'm Tournai on homegroup and join my laptop running Windows 7 Pro. I have a printer wireless on my home network, but also a Synology NAS of DS213air for backups. My laptop has no problem after turning on hom

  • AP1242 impossible to telnet or browse - shows permanently red-orange-Green

    Hello I had updated the light AP but at halfway because of the power of travel. Now when starting, the light keep on orange-red-green watch at all times. The AP take a dhcp ip address, but unable to browse or telnet. Please notify.