windows XP F6 installation does not work - cannot install the drivers for the controller

Similar Questions

• Windows 7 complete edition; Windows Update does not work, cannot install SP1 failed to install Security Essentials, ect...

  I have a laptop Alienware M17x R2 that was running Windows 7 Ultimate SP1. Recently, the hard drive crashed. I replaced the hard drive and reinstalled the operating system using my recovery disks.
  Loading Windows 7 Ultimate without SP1 recovery disks. I find that I can not get Windows Update in order to run - it says that "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. »
  I rebooted the computer several times, without success. When I go into Services, the Windows Update Service is running and the value "automatic (delayed start). Remote procedure call is also started. The Background Intelligent Transfer Service is currently not started and is set to "Manual".

  I ran Fixit of Windows Update and Windows Update diagnosis, without result. The diagnosis of WU came up with two questions: "registration for the Service is missing or corrupt - fixed" and "the recent updates - fixed installation problems.

  I also downloaded the SP1 from the Microsoft Download site and tried to install it. Installation failed with error code "E_UNEXPECTED (0x8000ffff).

  I tried to run the system update readiness tool, but it has also failed with an error "0xc8000247."

  I also tried to download and install Microsoft Security Essentials. Which is also impossible to install with an error code '0x8004FF91 '.

  I did a clean boot, but SP1 still wouldn't install and Windows Update still does not work.

  Then I made a new reinstall of the operating system of the drive Alienware Windows 7 Ultimate original, with essentially the same result. I couldn't update anything. I'm kind of pulling my hair at this point... the machine has worked until the hard drive crashed.

  Anyone has any ideas on where to go from here?

  Update - fixed

  It turns out that v Intel Matrix Storage Manager 8.9 which was supplied with Dell/Alienware had some problems. Download and install the latest version of the available from Dell Intel Rapid Storage Technology and everything seems to work very well. The download was not available when looking for specific drivers for the serial number of the machine. However, he did appear when you perform a general search for the M17x. All right...

  Hello

  Thank you for keeping us posted.

  Glad to know that you were able to find the solution for your problem. I appreciate your efforts to resolve the issue.

  Thanks for letting us share the resolution because it would help the other members of the community facing similar problems.

  Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

  ________________

  Thank you best regards &,.

  Isha Soni

• Adobe creative cloud installation does not work. Get the error code 207. All solutions?

  I recently got the cloud creative adobe and so far I'm not impressed with her. The adobe installer will not download the creative application of cloud. It keeps freezing for a minute and gives me this error message.

  And if you tell me that if I am on a managed network and I need to be wired connection to make it work, I am. I use a wired connection and my internet works perfectly. And I also tried disabling my firewall, antivirus software, basically everything what is perhaps perform the server. Still does not work... I tried everything and nothing works.

  Got it to work, it seems that it is bitdefender, my anti virus program sends me questions. However, I disable the antivirus program trying to get the installer to work and I still get the error. So I just straight up to uninstall bitdefender on my pc and it seems to work perfectly. Hope this helps anyone who has the same problem I did.

  See you soon!

• How to remove the part of an object grouped several using a shape (Pathfinder does not work, cannot get the knockout groups to work)? Kind of like the opposite of a clipping mask.

  I want to remove the portion of these legs inside of this graph, because a white circle solid at the Center intensifies the effect of the spiral.

  Background, the spiral is a mixture of the people flying around in a circle. The circle is then copied and turned several times. I have not developed the appearance again.

  There must be an easy way to do it, but I can't use the Pathfinders, the opacity mask, knockout groups, and make simple layers does not work. I just want to axe the legs of these easy people!

  

  

  

  This is not correct

  

  I do several models and want to find a way to make it easy and fast!

  

  Thanks to you all!

  Emmanuel,

  If I (put) correctly, you should be able to get the opacity mask to work as follows:

  Select (only) the White path and the mixture and then in the transparency palette flyout on create with unchecked Clip opacity mask and mask invert checked.

  Who must hide the inner part of the mixture corresponding to the white circle and let the front remains visible oin the background (circle and all that.)

  .

• Headphone Jack does not work after installing the audio driver on Equium A200

  Can anyone help? I downloaded a page update Toshiba sound card driver and now my headset does not work.
  The sound plays just of computer speakers.

  Please someone give answers.

  See you soon

  Hello Rocko

  I don't know how to answer them. Maybe you should explain your problem a bit better. For example:
  What operating system you are using? Why you installed the sound driver? Is the reason why your own installation of OS or you have had a few problems of her before?

  Sorry, but I just want to understand what is happening with your computer satellite phone?

• Windows 7 OEM installation does not work immediately

  Hello

  I tried to install Windows 7 x 64 Premium on a new computer, but I still get this error: "A required CD/DVD drive driver is missing".

  I tried two Windows 7 different DVDs, including a new copy from NewEgg, and two of them have started successfully on the drive, so I really don't see what the problem is? I used two readers different external DVD, but what specific drivers for each drive could Windows even need? DVD players must be sufficiently interchangeable to avoid this problem.

  I found this article on the basis of knowledge: https://support.microsoft.com/en-us/kb/2755139, but after using two different DVDs, both manufacturers, none of this applies really, unless they have both missed the combustion.

  Means that the probable error, the installation media is corrupt. You can download and create a new copy of Windows 7 Home Premium, and then try again.

  Step 1: Download a copy of Windows 7:

  http://www.gHacks.NET/2016/02/17/download-Windows-7-and-8-1-ISO-images-from-Microsoft/

  Step 2: Perform a custom installation, see Windows 7 section of the following article how to perform a custom installation:

  How to: perform a customized Windows installation

  Step 3:

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• Satellite A665 - 12K: BT does not work - cannot find the remote service

  Hello!

  Help solve the problem,

  Computer laptop A665 - 12 k connected via bluetooth devices, bluetooth Manager finds the device, but do not connect it gives an error 'Cannot find the remote service' before you reinstall windiws solved similar problems 7. Did you reinstall driver broadcom, resettlement (ver.8, ver.9) bluetooth stack, clean the registry, windows 7 the relocation does not contribute to what either.. .Please help!

  Hello

  I recommend you to check the services that are running in the background.
  The point is that if BT service is not running or is not enabled, the BT connection cannot be established.

  To check the service appointment on: Control Panel-> administration-> computer management tools
  or you can directly open the Services' list by typing services.msc command in RUN or Start Menu search box.

  No, you will get a list of available services. Search for services called Bluetooth and activate this service by double-click a service and select the option you want.

  Then try to reactivate the BT using the FN + F8 key combination

• X 230 bluetooth does not work - cannot use the cell phone as personal hotspot

  I try to use the bluetooth in my X 230 to connect my laptop with my cell phone. I want to be able to use my cell phone as a personal hotspot, where I am in an area where no WiFi secure. I would have thought that it would be a standard feature in a laptop that is presented as a business device, but apparently this is not the case.

  I installed the bluetooth driver and the updated system, as suggested by joelle...

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&docid=HT073834

  and

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS012808

  ... but it's still not working for me. I am now able to connect my mobile phone to my X 230, but instead of allowing me to access the internet via bluetooth, a dialog box appears that allowed me to play songs that are on my cell phone using the laptop speakers.

  I am disappointed that bluetooth driver has not come pre-installed on the 230 x, and I'm disappointed that I'm not able to use my cell phone as a personal hotspot for my x 230.

  I solved the problem myself by following the instructions on this page.

  http://www.kevintaber.com/2012/05/25/iPhone-personal-hotspot-via-Bluetooth-tethering-to-Windows-7/

  In Windows 7, go to the control panel > hardware and sound > devices and printers
  Then right-click on the bluetooth device (in this case, an iPhone) and choose Properties
  Deselect all EXCEPT Personal Area Network Access Point

• Windows Start menu does not work when installing the latest important updates 25

  I am running Vista Home Premium.  When I install the important updates 25 current, the Windows Start menu will not work.  I use McAfee security updates have to do with security, so I guess there is some kind of conflict, however, I run the exact same system and security on my laptop and it has no os of problems of this nature.  Is it possible that I can solve this problem and install important security updates?

  Hello

  Thanks for the reply.
   
  I suggest you to check if you're facing the same question new account user/administrator account.
   
  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
  If you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
  http://Windows.Microsoft.com/en-AU/Windows-Vista/fix-a-corrupted-user-profile
   
  Let us know the status of the issue.

• I bought a new hp probook 4540 s, and the fingerprint does not work I installed the new driver but anyway, so help please?

  I've updated all but still, it won't work

  Hi Daniel,.

   

  I suggest you to install the validity fingerprint sensor driver to get the finger print sensor option in Control Panel. Here is the link for our reference.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-109053-1

   

  Then, you need to install the Manager software security tools to protect for the finger print job. Go through the link:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-106118-1

  Then you must install the player 3D HP 5 guard to protect the drive against damage in case the laptop is hit hard or fall from a low height, by parking the heads.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-106091-1

  You can also refer to the thread for your reference.

  http://h30434.www3.HP.com/T5/notebook-hardware-e-g-Windows-8/HP-ProBook-4540s-fingerprint-sensor-not-detected-useless/TD-p/1942347

  If you have other questions related to the issue, then I suggest you to contact HP support. They would help you better.

  http://h30434.www3.HP.com/

  Back to us for any other questions related to Windows.

• Satellite A500-1GL - Microphone does not work after install the OS re-

  re-installed OS updated all bios drivers etc. Can't get anything to record. Skype not getting no sound. Do not record other programs.
  Have uninstalled and reinstalled all the audio drivers, including the driver of the webcam.
  Have you checked the forums, but cannot find any solution.
  Can anyone help?

  Satellite A500-1GL.
  Windows 7 64 bit

  You have reinstalled original Win7 64 bit family Premium that you got with your machine?

• Free trial of Adobe Pro DC installation does not work why?

  Free trial of Adobe Pro DC installation does not work why?  The installation proceeds very slowly and simply makes anywhere between 11% and 40% before I get either a general "Error" message or one that says WebGet failed.

  I use Mac Yosemite and download of Firefox.

  You have downloaded the installer at the bottom of the link?

  Download Acrobat products | Standard, Pro | DC, XI, X

• Sound does not work. Under the properties of sounds and Audio, peripheral devices by default "sound" is grayed out.

  Original title: audio device problem
  just reinstalled windows xp.  Sound does not work.  Under the properties of sounds and Audio, peripheral devices by default "sound" is grayed out.  Microsoft Fix it, but the best I get is "do not set as default audio device.  The lack of sound recording does show a device.  Ideas?  BTW, I sometimes get static noises out of the speakers.

  Hello

  I suggest you to follow the steps from the link and check if it helps.

  No sound in Windows

  I hope this helps.

• Windows Installer does not work with Vista Home Premium 32-bit system.

  My computer did not an automatic update in over 6 months.  I discovered this when I could not install my tax preparation software.  the error message is gone "windows installer does not work, a file may be damaged, contact support windows technique.»

  SFC

  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type

  sfc/scannow
  

  For the results of the SFC
   
  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

  The system update tool

  Ensures the consistency of the folder WinSxS (Side by Side).

  http://Windows.Microsoft.com/en-AU/Windows7/what-is-the-system-update-readiness-tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To see the results click on Start - All Programs - Accessories - right click on command prompt and choose run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Reregister Windows install

  Desktop shortcuts are shortcuts to the Windows Installer which then starts the Office program.

  Click Start - all programs - Accessories - right click on command prompt and choose run as administrator. Type

  regsvr32 c:\Windows\System32\msi.dll
  regsvr32 c:\Windows\System32\msihnd.dll
  regsvr32 c:\Windows\System32\msimtf.dll
  regsvr32 c:\Windows\System32\msisip.dll
  c:\Windows\System32\Msiexec.exe/reg

  That you re-register Windows Installer.

• Satellite A300-1EH - windows installer does not work correctly

  Hello, this is my first post on this forum!

  My windows installer does not work correctly.
  What should do?

  Soryy, but I did not now much on computer systems.
  I have reinstall this installer?

  I'm waiting for your answers.

  > My windows installer does not work correctly.
  What do you mean exactly? You see a mistake? What exactly happens?
  Maybe your CD is scratched or damaged.