Windows XP go into standby mode

Similar Questions

• Cannot restart; Function F8 does not work; stuck at "restart windows." Put in standby mode.

  Put the PC into standby mode.  Stuck in the status of "Recovery of Windows".  Impossible to restart.  Power off several times.  F8 doesn't work no more.

  I don't think that XP shows a message "Windows Recovery" when it comes out of Stand By.

  It does when it's Hibernation.

  If you've been cycling power, you can have damaged your system files a bit and should probably start by running a chkdsk/r from the XP Recovery Console.

• WSD Print device device driver prevents computer from going into standby mode

  WSD Print device device driver prevents computer from going into standby mode

  This message indicates that the computer was unable to fall asleep by a device driver.

  Look for the drivers updated printer manufacturers website or run the Microsoft Fixit:

  http://support.Microsoft.com/GP/printing_problems

• Windows won't go into standby mode.

  I recently installed a new router (Linksys E3000) to link to a new laptop from my old office.  Now when I try to go into sleep mode, I get a message that says that the COM1 port prevents the day before the race.  He suggested a driver incompatibility.  The folks at Linksys say that it is a Windows problem.  Is it?  I have the Ethernet cable from my router connected to my desktop via COM1.  Thanks for your help.  BTW, everything works fine.

  Hello

  Try the solution listed: http://support.microsoft.com/kb/810905

• My printer interrupts communication with my PC when the P.C. goes into Standby Mode. Why?

  Until yesterday, the printer worked fine.  There is no cable or hardware change any.  I am running Windows XP with a jet of Lexmark color printer.

  When I restart the printer works fine.  However when the order goes into standby or hibernation mode, I can print is no longer when the box comes back active.  I get a message that "there is a communication error with the printer.  To correct this problem, a box appears I should go to start/settings/printer and make sure the "Enable bidirectional support" box is checked.  Unfortunately, I can't access the settings of the printer directly from the start menu.

  However, if I click on 'Options' that is displayed when the printer stops and I click "Troubleshooting", I don't see that the "enable bidirectional printer media" is more verified.  If I check, I get a message saying "printer is busy".  If I click on start again I get the same message and the "enable" box is unchecked.  If I hit Cancel, the box is also disabled.  I enter a loop that does not end.

  Any ideas how I can access the printer directly from the start menu settings?  Or how to prevent the impression of no longer communicate with my PC when it goes into sleep mode?

  Thank you much, long in advance for any suggestions you may have.

  It is a Lexmark Z-52.  After 8 hours of trying many different, including the link ideas that you suggested, I have determined that as a result of some recent Microsoft Download, the printer would work only if I used the Dell printing device incorporated in the installation software.  If I tried to install the Lexmark printer from the installation disc, I got the persistent problem.  I deleted all but access to the printer through the installed also origin and everything of fine.

  When I need to change the cartridges and align the jets, I install the Lexmark program, align the print cartridges and then remove the program Lexmark, using the default value of Dell for the printer remaining.

  It works, but why I had a problem, I don't know.

  TNX for the comments!

  Big Phil1

• Windows Defender scan in Standby Mode?

  De :  Ruby

   

  New HP laptop with Vista installed.  My Windows Defender is "on", then set it to scan at 02:00 every morning.  However, there is no record of a previous analysis.

  Windows Defender analyzes mode "sleep" or what I need to change the departure time?

  Any help appreciated :)

  De :  Smithsonian

   

  N ° your computer must be turned on. No process or service will run in standby mode.

  I sugest you change your time.

  Another response of the community of Windows Vista discussion groups

• T1530: DJ T1530 won't go into standby mode

  Hello

  We just bought a printer, DesignJet T1530 but we are facing a problem: printer will not go into sleep mode... and is very noisy (blowing fans)

  We put it up to 5 min, tried other times without success.

  Does anyone has a tweak?

  Thank you for your help.

  firmware: MRY_04_02_00.5 (will try the last of them but no indication on this issue in the release notes)

  SOLVED

  First of all, I tried to disable the internet functions without success.

  Have updated the firmware from MRY_04_04_00.4 and I appreciate very much the printer now in mode 'sleep'.

• Windows 7 goes into sleep mode when not in service

  Computer completely locked up all night, had to make a stop/reboot power strip, now everything works fine, but it won't in standby mode when not in service, regardless of the settings I can give it in the control panel

  I want to emphasize this happened after I downloaded rage radio, although I've uninstalled it quickly after realizing I was didn't want or need and I loved all the extra stuff that goes with it.   Have no idea if they are related or not...

  I checked for updates of driver in the Device Manager specially for the new mouse I had installed.  He said that the device was working properly.

  I did the boot as described in the previous post, with no result.

  Not having anything better to do, I decided to try reinstalling the original mouse (disconnect the new mouse from the USB port and plug the original mouse) starting the computer working properly.

  There is clearly some kind of conflict with the new mouse, but I have no idea what it could be.

  Anyway, thanks a lot for your help.  I'm happy to have solved the problem!

• my iphone won't go into standby mode

  I recently bought an iphone SE.  Recently, I noticed that my phone will not mode when connected to usb or power standby. The screen just goes dimmed, but does not go to sleep mode

  Is this normal?

  THX

  "Sleep" mode should make the display turns off. Is - this just dim halfway? If so, it is not normal.

• Drivers are interfering with Windows out of the standby mode after installation of Windows Vista Home Premium Service Pack 2.

  I followed the instructions of service newsletter and reduced to an Intel Graphics Kernel Mode Driver (igdkmd32.sys) that slows him back. The pilot is the more up-to-date version and the update of a windows wants.

  What are my options? I guess I need this driver as is the graphics found in the device manager driver. "Rollback Driver" is not appear as an option. I need to restore Service Pack 2 to resolve this problem? Thanks for your suggestions...

  For issues related to Vista SP2, there is FREE Microsoft Support assistance is available at: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1.  I suggst contact you and get their expert help for your problem that was caused by SP2.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Printer won't go into Standby Mode

  I just bought printer e-all-in-one HP Photosmart 7510 - C311a, and constantly when my Mac that works on OS X starts in mode 'sleep' the printer sounds as if it is being initialized.  It also has a message on the screen to turn off the unit to avoid damage.  I do not understand, this printer is a 'sleep mode' too?  I don't want you must manually activate it offshore, but he makes too much noise until the mac is turned back on.  What should I do?

  Is the printer plugged into a power strip or surge protector?  If so, plug it straight into the wall.

• cannot go into standby mode automatically only manual

  How can I get my computer to go to stanfby automatically

  Hello
  From > start / Control Panel > settings > Control Panel, open Power Options then power management. Select the desired settings for standby and hibernation. OK your way out.

  Hope this helps,
  Don

• New model 6700 printer, Windows 7, running wireless, "standby mode"

  Printer 15 minutes "sleep mode". (hold that it was not a sleep mode option). When you try to print once he's asleep, an error screen appears indicating that the wireless printer is not connected.  After waiting, the printer, sometimes turns on and prints.  Other times I have to go in printing to cancel the print job and try again.  Coming out of sleep mode lasts too long.

  Hi, do you have the IP address of a static on the 6700 JO?

• Portege 7140CT Shutting Down in Standby Mode - cannot close normally

  Hello. I bought a laptop Portege of CT 7140 for my son. It is a very good unit but has a "Shutdown" problem - only it used to closing, that is. It seems to power off, but the 2nd of the LHS on the front of the device flashes slowly. The user's guide explains what happens when the device goes into "Standby" mode I tried all the options of FN + F3 (off, standby and Hibernate) with no difference. I disabled the feature key installation in the Panel. I disabled the "Hibernate" mode in the control panel. All to nothing does not. Someone at - it an idea why this is happening and how can I solve? Thanks a lot for your help. Mike

  Hello

  I never heard of this problem, but maybe to reinstall the system can solve it.
  Or perhaps reinstall or update the BIOS will help you.
  I'm sorry that I don't have a better idea.

  Good bye

• I have the latest Windows Live Mail 2011, but when standby and locks system, the only way out is to do a complete or end of Windows, restart then go into sleep mode. This never used to happen until Windows 2011 has been upated in my PC.

  I forget always at the end of the lIve session of Windows before you put it in standby mode, the PC appears and then lock properly said, in response to anything, so I have to do a reboot complete, very annoying.

  Also when working within Windows 2011, if you add a lot of attachments to an e-mail, I have often to do and then send it, the list of attachments disappear off the screen, so when you send you do not know really which was transmitted, horrible situation, so you must include send to yourself, then you can check what has been sent. Stupid!.

  How can I get rid of these flaws?

  You will find support for Windows Live Mail in this forum: http://windowslivehelp.com/forums.aspx?forumid=b91657c9-9031-4406-a398-7d0783119bb7

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft