Windows xp hangs at startup

Hello

My came from Dell with windows xp already installed a number of years (so an OEM?), recently it started to freeze at startup, I can enter my password, then my desktop icons appear, then after 10 seconds, the system freezes. I can't boot into SafeMode either-i just see a blue screen with messages various warnings as run CHKDSK/F. but I can't run or do something like the system will not go beyond this initial stage - (I saw somewhere on the help pages on the use of a startup like ubuntu disk to run the system and files backup at least) a help appreciated please? WM

Hello

You will not be able to use ubuntu to back up files to the extent of the im aware that ubuntu does not read the ntfs file system. However, knoppix will be. Here's a little guide to help you to get your saved documents. But ill be honest if your getting warning messages about running chkdsk /f then your drive hard maybe on the road to disappearance or the file system is maybe messed up. I would like to launch a material check hard disk after that you've got your records to see if its kaput.

Tags: Windows

Similar Questions

Windows 7 hangs at startup

Original title: ADVENT ROMA, WINDOWS 7 hangs at startup

Sorry, it's a long. Please can someone help?

I'm in safe mode with NETWORK at this time because it does me to start up in normal mode, just freezes. He started two days during the Action center said for me to turn the Security Center service in Windows, but when I click on it nothing happens. He says only: "safety of the window cannot be started. He also said that my AVAST antivirus has been extinguished, but that came back yet again, I don't know how because I couldn't do it when I clicked it.

I had this problem with starting of freezing and antivirus itself switching off before a few months ago and it is resolved by deleting the antivirus and re install and run cleanboot. I tried cleanboot once again, for the safe mode, but the problem is still there. I tried SYSTEM RESTORE but it says No restore points are created on the drive system of your computer to create restore point open 'system protection'. When I click the link it just takes me to system properties and there is no mention of the protection of the system. I try to get the protection of the system through Start >right-click computer > properties and there is no system protection tab in the left pane click. Is there another way to perform a restore of the system? When I did cleanboot two months of action there is, as a result, I found on the microsoft Web site could I permanently deleted all restore points at the same time?

AVAST won't work in safe mode, I don't know if it's just on my laptop or if it's a universal thing, so I can't do a virus scan so I downloaded scanner security Microsoft and no viruses etc. have been detected.

I haven't downloaded anything before it happens and the only thing I can think that I have done differently is I plugged an external mouse for my daughter (who did not work anyway) and it worked fine after disconnection until a few hours later, so I think that have nothing to with it.

This is what I tried so far as I can remember so...

Help!

PLEASE, I BEG YOU!

Hi Panad,

Disable SuperFetch service in safe mode, restart the computer in normal mode and check the status of the issue.

a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.

b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

c. right-click on the Service and then click Properties. d click on disable. e. save the changes by clicking on apply and ok.

I hope this helps.

InDesign 6.0 on Windows 7 hangs at startup after time change

My InDesign 6.0 running on Windows 7 hangs at startup. I was working on the program when my time system changed last night and now, there's an error between two timestamps. I followed the instructions to remove preferences, to remove default values and reinstalled everything. I can't find the SavedData file according to the instructions. What should I do next?
This is the accident report.
Version = 1
EventType = APPCRASH
EventTime = 130594285899142630
ReportType = 2
Consent = 1
UploadTime = 130594285899462648
ReportIdentifier = e25ae4d0 - 62 2-11e4 - 8 17-026090540701
IntegratorReportIdentifier = e25ae4cf - 62 2-11e4 - 8 17-026090540701
WOW64 = 1
1. Response.Type = 4
SIG [0]. Name = name of the Application
SIG [0]. Value = InDesign.exe
GIS [1]. Name = Version of the Application
GIS [1]. Value = 8.0.2.413
GIS [2]. Name = timestamp of the Application
GIS [2]. Value = 51fb7197
GIS [3]. Name = name of the Module fault
GIS [3]. Value = ObjectModel.dll
GIS [4]. Name = Fault Module Version
GIS [4]. Value = 8.0.2.413
GIS [5]. Name = Fault Module Timestamp
GIS [5]. Value = 51fb7185
GIS [6]. Name = Exception Code
GIS [6]. Value = c0000005
GIS [7]. Name = offset of the Exception
GIS [7]. Value = 000179d 4
DynamicSig [1]. Name = OS Version
DynamicSig [1]. Value=6.1.7601.2.1.0.256.48
DynamicSig [2]. Name = locale ID
DynamicSig [2]. Value = 1033
DynamicSig [22]. Name = additional Information 1
DynamicSig [22]. Value = 0a9e
DynamicSig [23]. Name = additional Information 2
DynamicSig [23]. Value = 0a9e372d3b4ad19135b953a78882e789
DynamicSig [24]. Name = additional Information 3
DynamicSig [24]. Value = 0a9e
DynamicSig [25]. Name = additional Information 4
DynamicSig [25]. Value = 0a9e372d3b4ad19135b953a78882e789
UI [2] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\InDesign.exe
UI [3] = Adobe InDesign CS6 has stopped working
UI [4] = Windows can check online for a solution to the problem.
UI [5] = check online for a solution and close the program
UI [6] = check online for a solution later and close the program
UI [7] = close the program
LoadedModule [0] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\InDesign.exe
LoadedModule[1]=C:\Windows\SysWOW64\ntdll.dll
LoadedModule[2]=C:\Windows\syswow64\kernel32.dll
LoadedModule[3]=C:\Windows\syswow64\KERNELBASE.dll
LoadedModule [4] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\ObjectModel.dll
LoadedModule [5] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\PMRuntime.dll
LoadedModule [6] = C:\Windows\syswow64\PSAPI. DLL
LoadedModule[7]=C:\Windows\system32\dbghelp.dll
LoadedModule[8]=C:\Windows\syswow64\msvcrt.dll
LoadedModule [9] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\tbb.dll
LoadedModule[10]=C:\Windows\system32\MSVCP100.dll
LoadedModule[11]=C:\Windows\system32\MSVCR100.dll
LoadedModule[12]=C:\Windows\syswow64\USER32.dll
LoadedModule[13]=C:\Windows\syswow64\GDI32.dll
LoadedModule[14]=C:\Windows\syswow64\LPK.dll
LoadedModule[15]=C:\Windows\syswow64\USP10.dll
LoadedModule[16]=C:\Windows\syswow64\ADVAPI32.dll
LoadedModule[17]=C:\Windows\SysWOW64\sechost.dll
LoadedModule[18]=C:\Windows\syswow64\RPCRT4.dll
LoadedModule[19]=C:\Windows\syswow64\SspiCli.dll
LoadedModule[20]=C:\Windows\syswow64\CRYPTBASE.dll
LoadedModule [21] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\Database.dll
LoadedModule [22] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\Public.dll
LoadedModule [23] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\ACE.dll
LoadedModule[24]=C:\Windows\syswow64\SHELL32.dll
LoadedModule[25]=C:\Windows\syswow64\SHLWAPI.dll
LoadedModule[26]=C:\Windows\syswow64\ole32.dll
LoadedModule [27] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\BIB.dll
LoadedModule [28] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\CoolType.dll
LoadedModule [29] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\MPS.dll
LoadedModule [30] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\AGM.dll
LoadedModule [31] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\ARE.dll
LoadedModule [32] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\BIBUtils.dll
LoadedModule[33]=C:\Windows\syswow64\WS232.dll
LoadedModule[34]=C:\Windows\syswow64\NSI.dll
LoadedModule[35]=C:\Windows\system32\MPR.dll
LoadedModule [36] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\AFL.dll
LoadedModule [37] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\icuuc40.dll
LoadedModule [38] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\icudt40.dll
LoadedModule [39] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\icuin40.dll
LoadedModule [40] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\amtlib.dll
LoadedModule[41]=C:\Windows\system32\WINHTTP.dll
LoadedModule[42]=C:\Windows\system32\webio.dll
LoadedModule[43]=C:\Windows\syswow64\SETUPAPI.dll
LoadedModule[44]=C:\Windows\syswow64\CFGMGR32.dll
LoadedModule[45]=C:\Windows\syswow64\OLEAUT32.dll
LoadedModule[46]=C:\Windows\syswow64\DEVOBJ.dll
LoadedModule [47] = C:\Windows\system32\IPHLPAPI. DLL
LoadedModule [48] = C:\Windows\system32\WINNSI. DLL
LoadedModule [49] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\adobecaps.dll
LoadedModule [50] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\boostfilesystem.dll
LoadedModule [51] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\boostsystem.dll
LoadedModule [52] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\boostregex.dll
LoadedModule [53] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\icucnv40.dll
LoadedModule [54] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\ASLSupport.dll
LoadedModule [55] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\WRServices.dll
LoadedModule[56]=C:\Windows\syswow64\COMDLG32.dll
LoadedModule[57]=C:\Windows\WinSxS\x86microsoft.windows.common-controls6595b64144ccf1df6.0.7601.17514none41e6975e2bd6f2b2\COMCTL32.dll
LoadedModule [58] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\WidgetBin.dll
LoadedModule[59]=C:\Windows\syswow64\IMM32.dll
LoadedModule[60]=C:\Windows\syswow64\MSCTF.dll
LoadedModule [61] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\AdobeOwl.dll
LoadedModule[62]=C:\Windows\WinSxS\x86microsoft.windows.gdiplus6595b64144ccf1df1.1.7601.18 455none72d576ad8665e853\gdiplus.dll
LoadedModule [63] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\AdobeOwlCanvas.dll
LoadedModule [64] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\adbeape.dll
LoadedModule[65]=C:\Windows\WinSxS\x86microsoft.vc90.crt1fc8b3b9a1e18e3b9.0.30729.6161none 50934f2ebcb7eb57\MSVCR90.dll
LoadedModule[66]=C:\Windows\WinSxS\x86microsoft.vc90.crt1fc8b3b9a1e18e3b9.0.30729.6161none 50934f2ebcb7eb57\MSVCP90.dll
LoadedModule[67]=C:\Windows\system32\uxtheme.dll
LoadedModule[68]=C:\Windows\syswow64\profapi.dll
LoadedModule[69]=C:\Windows\syswow64\CLBCatQ.DLL
LoadedModule[70]=C:\Windows\system32\propsys.dll
LoadedModule[71]=C:\Windows\system32\ntmarta.dll
LoadedModule[72]=C:\Windows\syswow64\WLDAP32.dll
LoadedModule[73]=C:\Windows\system32\dwmapi.dll
LoadedModule[74]=C:\Windows\system32\CRYPTSP.dll
LoadedModule[75]=C:\Windows\system32\rsaenh.dll
LoadedModule[76]=C:\Windows\system32\RpcRtRemote.dll
LoadedModule[77]=C:\Windows\system32\mscms.dll
LoadedModule[78]=C:\Windows\syswow64\USERENV.dll
LoadedModule[79]=C:\Windows\system32\apphelp.dll
LoadedModule [80] = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\updaternotifications.dll
LoadedModule[81]=C:\Windows\system32\NETAPI32.dll
LoadedModule[82]=C:\Windows\system32\netutils.dll
LoadedModule[83]=C:\Windows\system32\srvcli.dll
LoadedModule[84]=C:\Windows\system32\wkscli.dll
LoadedModule[85]=C:\Windows\SysWOW64\taskschd.dll
LoadedModule[86]=C:\Windows\system32\XmlLite.dll
State [0]. Key = transport. DoneStage1
State [0]. Value = 1
FriendlyEventName = Stopped Working
ConsentKey = APPCRASH
AppName = Adobe InDesign CS6
AppPath = c: \ Program Files (x 86) \Adobe\Adobe InDesign CS6\InDesign.exe

reset your id, help InDesign preferences | Setting the preferences

Windows Vista hangs at startup

I had a problem with Windows Vista in the past months where it hangs on a blue screen or crashes at startup. Usually, I need to restart the computer several times before I'm finally able to get on the desktop and then it works fine after that. I went as far as when you run a restore complete system twice, but the problem persists. Thinking that maybe that's a hardware problem, I ran a diagnostic equipment on the memory, video card, hard drive, motherboard and all other hardware components but the diagnostic equipment can find nothing wrong.

Here is my system configuration:

Windows Vista Edition Home Premium
Hewlet Packard AMD Athlon 64 X 2 Dual Core processor 5600 + 2.80 GHx
Hard drive 500 GB
3 GB RAM
Graphics NVIDIA GeForce 6150SE card

Any help is appreciated.

In administrative tools, choose the reliability and performance monitor and

Click on MonitoringTools then the reliability monitor (type of reliability in research

at startup). This list is a chart of the software installs, uninstalls, Windows

updates and crashes by date. See if your plant started to occur after

you installed or uninstalled something.

In the control panel select Problem Reports and Solutions (problem of type in)

The START searchbox), go to the history of the problem, your mistake right click and choose

Check the Solution.

Also get details of your crash blue screen of problem reports and

Solutions and post it here.

The two causes of blue screens are defective drivers or hardware failure.

Try these steps to remove defects of hardware that Windows can detect (I

not sure what you did before).

Type of memory in the start search box, and select Memory Diagnostic and then restart.

Normal and advanced race. This will take a few minutes.

In computer discs right click and choose Properties, then the Tools tab.

then click on check now. Check that the TWO boxes and then start. Reset. This will

take from one day to the next.

After running chkdsk (what does the foregoing) checks file

corruption by clicking on Start - Programs - Accessories - right click

Command prompt and choose Run as administrator. Type

sfc/scannow

--

..

--

"chestercat7" wrote in message news: 1d0e31df-1745-472d-967th-7ce0ce51afc6...

> I had a problem with Windows Vista in the past months

> where it hangs on a blue screen or crashes at startup. I usually

> need to restart the computer several times before that I'm finally able to

> Download the desktop and then it works fine after that. I went as far as

> performing a restore complete system twice but the problem continues.

> Thinking it could be a hardware problem that I ran a diagnostic equipment

> the memory, video card, hard drive, card mother and any other material

> components but the diagnostic equipment can find nothing wrong.

>

> Here's my system configuration:

>

> Windows Vista Edition Home Premium

> Hewlett Packard AMD Athlon 64 X 2 Dual Core processor 5600 + 2.80 GHx

500 GB hard drive >

> 3 GB RAM

> NVIDIA GeForce 6150SE graphics card

>

> Any help is appreciated.

Windows XP hangs at startup on the logo screen after modified registry authorization

I've changed a registry permission setting in WinXP SP2. Now after reboot, the computer hangs at the boot logo screen. He never to the logon screen. Same thing when I try the Safe Mode or Safe Mode with network.

Registry permission that I changed was in HP_CLASSES_ROOT. Permissions\Advanced\Permissions: Unchecked "inherit from parent the permission entries that apply to child objects. These entries include explicitly defined here. »

This is apparently what has caused the problem. I would like to reset the permissions, but obviously cannot access permissions check without going into windows first.

Help please?

Thank you - the procedure to restore a damaged registry.

The reprimand, however, is not necessary.

My windows 7 hangs at startup and does not update microsoft isatap adapt #5.

I use lenovo v570. Windows 7 just hangs up on start. IM using safe mode now. but when I check the drivers, the microsoft isatap #5 adapter has a yellow exclamation point and does not update. What should do? Help, please.

Hello

It's the Microsof Pnrtie on "Microsoft ISATAP adapter"

"On a Windows Vista-based computer or on a computer Windows Server 2008, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message"

http://support.Microsoft.com/kb/932520

See you soon.

CC on 10 Windows version hangs at startup

CC version crashes at startup. I don't have any Wacom devices or disks on my system. This is a new installation of windows 10. Help?

Hey guys,.

Thanks for your help on this. It happens to be associated with my graphics card driver. There was a last update of Nvidia that I installed it and now it works fine. I can't really say if it is related. But I lean with it.

See you soon

Windows XP hangs on startup after update 2.0.2.

Hi, I am a new user of Vmware Fusion (or Mac for that matter) so if you think that my problem happened to be quite some pretty stupid mistakes on my part.
Tuesday, I just noticed that the update to version 2.0.2 and downloaded at short notice. The program wasn't on my Windows XP has been suspended, and I made the mistake of not the have stopped even if it has been suspended. I install the new update without problem, but when I restart my computer and turn it on... Well that's the point that I realized that my windows account is always logged. I noticed that he was waiting to load something, the pointer is an hourglass. But it not let me restart my computer regularly. But once it starts, it freezes on the loading screen windows. Not sure what to do, I'm forced to reboot through the merger of WMware toolbar command. He now says he needs to check a large number of files truncates the files on it, but during the process. It happened pretty fast so I have not heard what it was, but after that, he reached an error and blue screen and tries to restart. At this stage let load normally just gives the same error message, and if I go to safe mode, it just freezes. I noticed that avast trying to do something before the error message. See the attached screenshots for what I mean.
He also tells me that VMware Tools is not updated, but when I try to update, it doesn't really do anything. I don't think it would work until she starts toward the top right (that I can't do). and unfortunately, I was not smart enough to have a backup of my desktop files (which I need), nor has the Snapshot function before my problem.
There is a simple problem that solves that I'm not aware of the problem?
If not, will reinstall the fix (assuming it will work directly in my new v2.0.2)?
If I reinstall it, is there a way to access the files on Windows XP through my Mac OSX? I can't of course through the Wmware Fusion.
I'm sorry that if this is not the right place to ask about this, I was directed here through the support for the view part after watching a response.

There are several thing you can try and basically the same things as if it were a physical machine as the boot with the XP install CD / ISO Image and either use the Recovery Console to repair the registry or do a repair install, but the first thing first of all try to mount the virtual hard drive and retrieve your user data , then, first of all make a backup of the entire Virtual Machine assuming that it is a normal base file Virtual Machine and the Boot Camp partition.

Take a look at: VMware Fusion (menu bar) > help > VMware Fusion help > managing Virtual Machines > VMDKMounter to help mount a virtual drive as a Mac Volume

Note: If VMDKMounter is mounted with success you will be unwise and a titled Untitled white drive icon should appear on your desktop.

Also use VMDKMounter with the Virtual Machine, not suspended and merger shutdown closed...

Live Family Safety Service Windows causes my Vista computer to hang at startup

My computer hangs at startup / commissioning for about 5 min. This happens only to start initial and not when the disconnection / log - on different users, only the initial start-up of the machine. Event Viewer identifies the above error. How can I fix it?

I solved this on Vista by changing the startup type of the Service Windows Live Family Safety from automatic to manual. You do this by using the computer management tool accessed through the control panel and the Administrative Tools folder. The service starts always but by another action.

First Pro CC 2015.0 hangs at startup on Windows 10

When you start the first Pro CC 2015.0 on Windows 10 he hangs at startup with the following error: "Adobe Premiere Pro 2015.0 has stopped working." A problem caused the program to work correctly. Windows will close the program and notify you if a solution is available. »
Tried to reinstall the first Pro CC 2015.0 but nothing does not.
Tried running as administrator
Any help appreciated

Hi Jerun,

Follow the steps below:

1. go to the start menu and open the Device Manager.

2. in Device Manager, look got graphics cards & click the menu drop down.

3. right click on the AMD Radeon graphics card & select off.

4. press OK and then try to throw the first.

Kind regards

Navdeep Pandey

KB2479628 apparently causing Windows hang at startup

Hello

I was wondering if someone could offer some advice on how to solve a problem, I'm going to.

I am using Windows 7 64 bit and downloaded all updates published on 8 February. Initially, I tried to install everything but once done the pc couldn't make it past the windows splash screen at startup. When I installed them one at a time, I reduced the problem to KB2479628. I looked through the forum already and although I see some tips issued for problems related to this update none of this quite fits. Can anyone help?

There is one other thing that may be relevant; When using system restore after failing once more install KB2479628 Windows Update displays this update according to the availability but also KB2485376 even if it is listed as a successful installation in the history of my update.

Thanks in advance for the help,

User interface.

EDIT: To add, I use the free version of AVG on a clean install of Windows 7 Ultimate 64-bit. I was using Norton anti-virus, but I am almost certain it was before me formatting my hard drive before installing Windows 7

You can see the effects of a W32/Alureon-variant rootkit infection.

Quote:

How to remove malware belonging to the family Rootkit.Win32.TDSS (aka Tidserv, TDSServ, Alureon)
http://support.Kaspersky.com/viruses/solutions?QID=208280684

1 follow the instructions on the page above & start TDSSKiller. Have it REMOVE whatever it is detected then restart your computer.

IF => TDSKILLER DETECTED & REMOVED SOMETHING:

2. open IE8 32 bit (only) at http://support.microsoft.com/kb/971058 (ignore the section will APPLY to) & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

3. restart one last time & test (see if these 2 updates now installs).

=====================================

=> IF TDSKILLER DETECTS NOTHING:

See the section "How to get help", for example, of http://support.microsoft.com/kb/2479628

Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

~~~~~~~~~~~~~~~~~~~~~~~~
[1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

The computer hangs after connecting first time. Dell Support Center will not stop running. Windows has blocked some startup programs.

Last week, I used Ad-Aware, Spybot and malware to scan my computer. They found several things, but my problems are now: computer falls down after a time of connection the first only. The center of Support Dell continues to operate for a few minutes, I just cancel now. "Windows has blocked some startup programs" keeps popping up in the lower left corner. I uninstalled Spybot but do I have to uninstall the other 2? During these changes last week, I changed too Trend-Micro (which was nothing capture) to the free version of AVG. Help, please. Muzictchr

Last week, I used Ad-Aware, Spybot and malware to scan my computer. They found several things, but my problems are now: computer falls down after a time of connection the first only. The center of Support Dell continues to operate for a few minutes, I just cancel now. "Windows has blocked some startup programs" keeps popping up in the lower left corner. I uninstalled Spybot but do I have to uninstall the other 2? During these changes last week, I changed too Trend-Micro (which was nothing capture) to the free version of AVG. Help, please. Muzictchr

Hey muzictchr

did you completely remove micro trend in your system

You can use an installed antivirus or conflicts occur

Use the tool to uninstall micro trend from the link below to remove all vestiges of what it may be the cause of conflicts with avg

http://eSupport.trendmicro.com/1/How-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspx

Walter, the time zone traveller

8 64-bit Windows hangs at startup

I installed windows 8 64-bit on my HP pavilion 2305TX g6. It was working fine but it hung up watching a movie with KM player yesterday. Then I force the laptop shutdown by pressing the power button for 5 seconds. After that once I start the laptop again it going the ORB of windows 8, but never starts. What should I do?

You must use the media that you have installed Windows 8 with access startup repair. Instead of select install click on repair.

Do this instead of use the refresh since it does not remove everything you have installed which was not purchased in the store of Microsof. This is the great disadvantage of the use of refresh.

The KM player you are referring is a Beta version and can cause problems with your installation of Windows 8.

HP Envy 700 060: HP Envy 700 060 hang at startup "prepairing auto repair.

I would be grateful for any help?

Took me to upgrade to a HP Envy 700 060, this work very well when I book in windows, however, I'm using Linux Mint 17.2. When I put the hard drive in the PC, it hang at startup ' repair automatic Prepairing. I can book for the CD of Linux mint and see the files on the Linux disk. What I want to do is boot in window 8.1 with installed theLlinux drive, then make a copy of the files on the hard disk, Linux, before reinstalling the Linux mint.

That's why does anyone know how to disable HP auto repair facility so it starts in Windows?

Note in the Bios, it seems not possible to book specifically from a hard disk, the option appears to be limited to my latest Bios PC options

Grateful for any help or suggestion

Oobals

He sees the Linux bootloader and tries to fix it. You need to install your OS' are in conjunction with each other. Perhaps you could try booting from a floppy disk to repair GRUB and see if you can not solve the bootloader to enable either Windows or Linux at startup but that is the only way I know Windows and Linux running side by side... have GRUB (the Linux boot loader) on the main hard drive and it comes up with an option to start. If you want to run the OS' are independent, disconnect the drive that has only the other OS on it.

My Disk Defragmenter Hangs After startup

My Disk Defragmenter Hangs After startup. I tried to use the microsoft fix it Center automatic troobleshooter for the maintenance of the system determine the cause and got an error code 0 x 80040154. He only "worked" on windows update and the update to fix issue still exists. I'm trying to find out what means error 0 x 80040154 and how to solve the problem.

Hope that gives you enough information.

Hello

(1) operating system do you work?

(2) which Fix - it applied?

(3) what is the exact full error message?

Try the following methods and check the status of the issue.

Method 1:

Run a scan of the file system checker and check if it helps.

http://support.Microsoft.com/kb/929833

Method 2:

Check a drive for errors.

http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

NOTE: This task might cause loss of data on your computer. It is recommended that you back up all data and files before performing this.

Windows xp hangs at startup

Similar Questions

Maybe you are looking for