(Windows XP) Huge problem associated with Windows XP Signature

Similar Questions

• Fix for common problems associated with Windows Update repeatedly trying to solve the same problem

  When the machine running Windows Update on a Windows XP Professional (SP3 with IE8), the information for the download of the ActiveX bar does not appear. Tried to run the Fix for "Common problems with Windows Update" and it says "Windows Update components must be repaired. Difficulty-it short, reports of success, "Found Themes" saying "one or more components of Windows Update are configured incorrectly". However, still unable to download updates from the information bar does not appear. Repeating the difficulty happens with exactly the same problem i.e. reports etc. but no success still can not download the ActiveX on Windows Update since the information bar never shows up.

  At tried all the suggested solutions I can find for the reported similar problems such as checking the downloads ActiveX security settings, reset Internet Explorer settings, and even resetting Windows Update (Articlce ID 971058) components. Still no luck. Therefore, I am unable to manually check and download updates of Windows security.

  Otherwise my PC works well. Norton Internet Security is installed but did not prevent Windows Update to work on another PC I have. The information bar appears sometimes for other downloads, and it doesn't seem to be a problem on the Windows Update page.

  Please can you help. Thank you.

  No, I'm not not first uninstall IE8 (or IE7) before proceeding with the repair facility...

  Long history, technical, short version: do not uninstall IE8 (and/or IE7) before doing a repair installation (Windows XP only!) leaves the two Internet Explorer and Windows in a State of "confused" or "broken". Your only recourse now is a clean install of Windows (after backup your personal data).

  No, another repair facility won't solve the problem - even if you uninstall IE8 beforehand.

  Follow the instructions in this post of mine in another forum (to-the-letter & in order! ) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Note: The computer must NOT be connected to the internet or local networks (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you.  Good luck!

  PS: So that registry cleaners can solve some problems (temporarily, at least), they are not & cannot fix what caused the problem. Compare to treat a broken leg with a stick and a couple of BandAids.

• Features of the power manager and other problems associated with the T510

  For the better part of 5 years, I was a happy user of an IBM Z60m and decided it was time to move my z60 to my son and buy a new T510.  Well, I have after several weeks of property I can honestly say I'm irritated and frustrated by several current issues and I'm ready to send back all.

  Starting from the moment I pulled it out of the box I was having problems of power management.  I was on Microsoft help forums, called the lenovo support and spent countless hours on blogs and forums looking for help.   No matter what I do in the put lenovo on arrangements to take away my computer goes to stanby after one minute of inactivity and then wonder my windows password.  After a full day to insert my password my frustration level is off the chart.  I removed the password in the settings of the user who has not helped.  I changed the global settings to disable password in stanby mode which did not help.  I changed the function to optimize power and others, but none of it helped.

  Beyond these problems... I inserted two different discs to insert new programs and my system kept telling me that he did not read either.  I first thought they were zero but my old laptop ibm read without problem.

  So there you have it.

  Are you sure that the system is set the mode after 1 minute?  Or is the screen is locked?

  Try this:

  1. right click on the desktop and choose "Customize".

  2. click on "screen saver" in the lower right corner

  3. uncheck the box that says "On Resume, the logon screen"

  Which solves your problem?

• How to solve the problems associated with the keyboard on my Equium A100-147

  Hello.
  I have a laptop which is the Toshiba standard above and I have a problem with the keyboard.
  Some of the key are defective. For example when I caress symbol I get 'and when I run' @ I @.
  There are several keys that behaves differently (#, |) etc. How can I solve these problems so that keyboards can be used effectively?

  Hello

  Don't panic man ;) This isn't a type of problem.
  You get different or bad signs on the screen because the keyboard layout does not match with the keyboard language setting in regional and language options in Control Panel.

  Please check it and change it in another language; Maybe the United States to the United Kingdom

• the problems associated with writing script

  Hi all

  I use DIAdem 10.2

  (1) I write the Script for the declaration of my scada system. In my report model, there are some common text as user field, period reoprt, designation, report, etc. etc... I designed the dialog box to ask these details in starting, and now I wanted to transfer these details on each page of the report. Is it possible to connect these details with the report model?

  (2) I am facing problem in the allocation of train paths within the script... Is it possible to get rid of problems that arise due to movement of files from file *.sud or *.tdr. It will be great if diadem automatiocally search inside the folder in which the script is saved... so whenever we are going to move the complete file of any statement. It won't create any problem condition save us all files in a folder.

  (3) I crushed my script different system or sometimes need to distribute it. Is it possible to make my script running on another system where tiara is not installed... sort of it, even making available using any platform of programming such as LabVIEW, Measurement studio, CVI etc. etc.

  Thank you very much!

  HS

  HS Hello!

  (1) you can use global variables to solve this task. There are some predefined as "T1" or - I prefer - assign them in the Script with the command GlobalDim and fill them in your data. In the report, you can use the expression '@T1 @' or ' @@MyGlobalDimVar @ ' in the text fields to display the content.

  (2) you can use the AutoActPath variable to all access to the files compared to the running script. If you put all your files next to the script, you can move the package wherever you want in the file system. In all commands of loading like PicFileLoad you must use AutoActPath.

  (3) you can run Scripts DIAdem and dialogs only in DIAdem.

  Matthias

• Problems associated with tours to the iPad and Mac

  Hello

  I have an AIR-WLC2112-K9 controller with 1250 TOWERS, customers could connect without problem a few weeks ago, most of the customers are towers, some are Mac and a little
  are iPads.the security is WEP encryption.

  Suddenly the ipads could not associate with towers, a message appears on the passwords, but passwords are correct, temporarily I solved the problem
  After changing to WPA - PSK, but the next day the problem came once more. With Mac, the problem is that they can't rally or many abandons the connection

  In my case one having a RIDE and I have no problems, I can associate whenever I want, and also other towers.

  I intend to upgrade to AIR-WLC2100-K9-6-0-196-0.aes but I don't know if this will solve the problem.

  any suggestion?

  Have a read of this:

  http://www.Cisco.com/Web/software/wireless/deferral/Software_Advisory_6_0_196_0.html

  If you upgrade to a higher version of firmware, Cisco recommends 7.X.

• What are the problems associated with the Microsoft Sidewinder Gamepad?

  The Joystick would not apply entries when you play Microsoft Combat Flight Simulator. original version, version 2, version 3 or Wings over Viet Nam.  It displays a constant change in the control stick.  It calibrates well and fine Tests from the control panel and Settings feature in the game. I uninstalled every program and they started with the installed Joystick and once the game has loaded.

  Hi Laurent,.

  I suggest you follow the link and check if it helps.
  http://support.Microsoft.com/kb/294672

  I hope this helps.

• SQL performance problem associated with rownum.

  Dear Experts,

  I have a sql

  SELECT TEMP.col1, TEMP.col2, TEMP.col3, TEMP.col4, TEMP.col5, ROWNUM, not

  (SELECT col1, col2, col3, col4 FROM table1 ORDER BY DESC col4 col5) TEMP WHERE rownum between? and?

  When I put the value of range rownum 1 and 100, it works very well. But when I put 101 and 200 no records returned.

  So I modified it as fllows

  SELECT TEMP.col1, TEMP.col2, TEMP.col3, TEMP.col4, TEMP.col5,NWR No. OF

  (SELECT col1, col2, col3, col4, col5, rownum NWR FROM table1 ORDER BY DESC col4) TEMP WHERE NWR between? and?

  It works fine and giving results desire. But the issue here is the modified SQL becomes very slow. It gives results in 20 minutes. Although SQL earlier gave results in a few seconds.

  Records in table1 is 40 million.

  Is there another way to get good performance results accurate?

  Your help will be much appreciated.

  Kind regards

  DD

  Hi try this... If you want that data should be in the specific order (as order by desc col4, then you can use analytical ROW_NUMBER() function as below). Try it out below and let me know in case of any problems

  SELECT TEMP.col1,

  TEMP.col2,

  TEMP.col3,

  TEMP.col4,

  TEMP.col5,

  NWR NO.

  FROM (SELECT col1,

  col2,

  col3,

  COL4,

  col5,

  ROW_NUMBER() over (ORDER BY DESC of col4) rno

  FROM table1)

  NWR WHERE between 101 AND 200;

  (GOLD)

  SELECT TEMP.col1,

  TEMP.col2,

  TEMP.col3,

  TEMP.col4,

  TEMP.col5,

  NWR NO.

  FROM (SELECT col1,

  col2,

  col3,

  COL4,

  col5,

  ROW_NUMBER() OVER(ORDER BY col4 DESC) NWR

  FROM table1)

  WHERE NWR<=>

• My speakers produce an ear piercing rumble sometimes that does not seem to be associated with a particular activity. Any ideas as to the source and the possible fix?

  It seems that the problem associated with my video/audio card that has been recently replaced due to the failure of a similar video/audio card earlier.

  (ViXS Pure TV-U4888 NTSC/ATSC Combo).

  Hi G_N_P_HL,

  1. did you other changes on the computer?

  2. when the problem occur?

  3. when and how does the ear piercing rumbling stops?

  First, make sure you don't have any programs or applications or in the course of performance when the problem occurs.

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

• -A file association problem exist, which prevents the file you are trying to download from being associated with the correct application of the operating system using the windows 7 IE 11

  --	Is a file association problem, which prevents the file you are trying to download from being associated with the correct application of the operating system

  IN USING THE WINDOW 7 IE 11 HOW CAN I FIX IT?

  Try to download the installation offline programs:

  • Adobe Reader
  • Flash Player for Internet Exporer - ActiveX
  • Flash Player for Firefox - NPAPI

• Trying to send the e-mail verification code is more associated with Windows Live account

  When I try to change my live billing on Windows information it says that it does not recognize my computer - wtf? - and attempts to send a confirmation code to my email address. However, the problem is I changed the email associated with my account and he's trying to send this code to my old email address. Ive changed my coordinates into my Windows Live account so that this old email is in no way associated with my account. The braniacs at microsoft customer support told me to post my question on this forum and client technical support technicians will help me as soon as POSSIBLE. If they were not lying to me then please PROVE ME WRONG AND help me FIX MY ACCOUNT!

  This forum has nothing to do with Microsoft, including XBox, Hotmail or Windows Live services.  It is filled by volunteers, not employees of Microsoft, and no one here can help you with your problem.  You need to use the resources of contact that you previously used to solve your problem.

• When I try to play games on windows vista I get a message saying "this file does not have a program associated with it for performing this action. Create an association in the control panel of the associations. How can I fix it?

  XXXXXX

  Hi Randy,

  Welcome to the Windows Vista answers Forum!

  I have a few questions about your concerns:

  (a) game in which you try to read?

  (b) is this the case with all games or any game in particular?

  (c) you are trying to play the games that are built with Window Vista?

  (d) what version of Window Vista do you use?

  You can also try the suite of measures to define the association:

  1. open the control panel. (Classic view)

  2 click the default programs icon.

  3 click on the link associated with a file type or Protocol with a program . (See screenshot below)

  4 click the extension file type to change which program .exe association opens. (See screenshot below)
  NOTE: It may take a while to load up

  5 click on change program button.

  6 if the list, select the program that you want to be associated with (opens) the file extension. (See screenshot below)

  (A) check the always use the selected program to open this type of program , and then click OK.

  7 if the program is not listed, then click the Browse button and navigate to the .exe of the program you want to default to open the file extension.

  (a) select the program.

  (b) click on the Open button

  (C) check the always use the selected program to open this type of program and click OK to apply.

  This should solve your problem.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The desktop icons do not work, error associated with: c:\windows\system32\rundll32.exe

  original title: c:\windows\system32\rundll32.exe problem

  my desktop icon does not... "If I try to open any application a messege always apper" open with "a list of program... when I try to open the Control Panel control panel open, but when I try to open Add / Remove program error appear c:\windows\system32\rundll32.exe application not found. and now is the worst new appers message "this file has no program associated with it for performing this action. create an association in the folder options panel"Please I need help, nothing works on my laptop is xp :-(

  Hi kipepeoliciousslemani,
   
  This problem occurs because of a missing or corrupted Rundll32.exe file. This problem can also be caused by a virus.
   
  Follow the steps listed in the article for this problem:
   
  Cannot find the Rundll32.exe file when you open Control Panel

• Windows Mail: this file does not have a program associated with it

  I can receive and open the email, but when I click on anything in the email a box comes up which says "this file does not have a program associated with it for performing this action. Create an association in the set associations Control Panel. Don't know what to do. Any help would be great.

  Sorry, there just no option in this forum for the widows of mail... windows vista Home premium.

  [Original title: windows mail problem]

  ... when I click on anything in the email is a box that says "this file has no program associated with it for performing this action...".

  Everything is a bit wide.

  • If what you click is a hyperlink to a Web page or a URL of type http://answers.microsoft.com/en-us/windows/forum/windows_vista-ecoms/windows-mail-this-file-does-not-have-a-program/62ac226a-cca4-4ae9-9678-98e0a015fc2a, then the file associations that are broken are those who launch a browser to view the web page. This would include the HTTP and HTTPS protocols.
  • If you click is an email address, it is the file association for the mailto: protocol that broke.
  • If it you click on a file as an attachment to the e-mail message, then this is the file association for the type of file (for example, .docx, .pdf, .jpg) concerned who broke.

  Assuming that you are talking about the first, (re-) represent Internet Explorer as default browser by clicking on the Start button then clicking default programs. Select set your default programs, and then Internet Explorer in the left page and click the Green Summit.

  To ensure that all users of the computer doesn't have the same problem, login Windows with an administrator account and return to the default programs page. This time, select set access and the computer program defaults.

  1. Select custom , and then click the chevrons pointing to extend the selection.
  2. Under choose a default browser, select Internet Explorer.
  3. For other browsers you use, select enable access to this program .
  4. Click OK, and then restart the computer.

  Now try to click a link in an e-mail. If it still does not work, please describe in detail what is happening, including the full text of the error message.

• When trying to open a link in Windows Mail, get the message: "the file doesn't have a program associated with it for performing this action."

  When you try to open a link in windows mail (Vista) get the message "the file doesn't have a program associated with it for performing this action. Create an association in the set Associations control panel

  original title: Windows mail in Vista

  When you try to open a link in windows mail (Vista) get the message "the file doesn't have a program associated with it for performing this action. Create an association in the set Associations control panel

  original title: Windows mail in Vista

  Usually, but not necessarily always, this problem has to do with your Intrenet Explorer or your main browser with NOT all its faults.

  Open start > default programs > set your default programs > column on the left, click on Internet Explorer or your main browser...
  He said "this program has all its defaults"?
  If not, click on choose by default for this program > put on check all entries in the list > OK when finished.