Windows xp hung up on the loading screen

I have a gateway LT2016U and windows is suspended upward at the loading screen. the status bar continues to go, but the light of the hard drive on the computer is turned off. When I go to the safe made it stops at the line multi (0) disk (0) rdisk (0) partition (2) \windows\system32\drivers\amdagp.sys to safe mode startup. When I try and make a last known good config is located just at the windows loading screen.

you could also try mode safe mode with command prompt and see if you get anywhere with the machine.

If nothing, i.e. None of these boot menu options work, then you should borrow a cd from someone win xp so that you can start with it and start the recovery console.

I do not have a netbook, but its likely your bios can support USB boot.  in this case, you need a usb cd drive in order to use the above method.

If using the cd xp is not possible, then your only recourse is to go on the net House books site and see if there are tips that you can use.   but I guess the only option they will bring must provide the step on performing a factory restore, that will wipe the drive and reinstall the original software.

the original software is the will is in a hidden partition which is inactive on the hard drive.  then using a certain key sequence, the hidden partition will be re-activated and start restoring.

but send an email to their tech support and see what they say too.

Tags: Windows

Similar Questions

  • restart Windows homescreen befor (just past the loading screen)

    Help, please!

    As I said, windows restarts right after the loading screen, but this isn't the only problem after BIOS screen (first), my keyboard no longer works, so I can't choose to load bootable disc or choose Safe mode!
    now my pc restarts again and again! and I don't know what to do! Please help :(

    Hello

    I suggest you to follow the steps in this link and check if it helps:

    http://support.Microsoft.com/kb/308041#3

    It will be useful.

  • Windows Vista starts only with the loading screen

    Original title: Problem with Vista Business

    I have a pc with vista professional in this regard, there is a problem with the windows and it does not start, just on the loading screen. The machine came with a disc of recovery for xp only. I'm trying to find a download of Vista business so I can fix it rather than having to restore to XP. Anyone know where I can download it?

    Hello RussellNolan,

    It may be possible to solve this problem without having to reinstall the operating system.

    What exactly happens when you try to start normally?

    Let's start with the safe boot mode:

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    If it works, we can try to boot minimum troubleshooting:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Let us know if this helps out.

    Best regards

    Matthew_Ha

  • Windows 7 Boot stuck in the loading screen

    Hello

    I have an Acer laptop, I don't know really how and when it started there is 3 of us using this computer, but now when I open my laptop it get stuck in the loading screen "starting Windows." It is not frozen, it's just stuck there. And in order to enter the actual Windows operating system, I have to first press a key.

    It could be things possible cause?

    Here are some solutions I've tried based on my research on the Internet:

    1 uninstall Antivirus.

    2 reset the BIOS.

    3 chkdsk all discs in safe mode

    4 scannow command, he had errors but did not say what that

    5 edition msconfig and do a clean boot with no start-up of the thread and MS services only.

    I hope someone can help.

    Thank you

    Hello

    What button do you press; F1 or F2?

    If so, check if the Date and time is correct.

    If she is not and again become incorrect after reset correctly, then turn off machine, then turn again, it's a battery CMOS failed in the motherboard, the origin of the problem.

    See you soon.

  • Windows Vista will not go past the loading screen

    Hey - last night my computer was working fine, I had nothing to open and was watching television, then we had a power cut, I thought everything was fine. But when I went to turn my computer on this morning he gets just stuck at the loading screen (the one with the green bars). I have tried reboot, unplug the unit and system repair, the windows vista startup disk, just. When I put in the disc, it does something together press button as I do, then it loads the files then goes back right screen loading with green bars, he done the same for any route I'm trying. I could use the help because the computer has very important files that I can't afford to lose.

    Thank you

    Try and back up your data:

    Data recovery:

    1. slave of your hard drive in another computer and read/save your data out there.

    2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

    3 Alternatively, use Knoppix Live CD to recover data:

    http://www.Knopper.NET/Knoppix/index-en.html

    Download/save the file Knoppix Live CD ISO above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://isorecorder.alexfeinman.com/isorecorder.htm

    Download the Vista software from the link above.

    After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

    Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

    Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.

    Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

    When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

    Click on the icons of hard drive to open and to understand which drive is which.

    Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

    Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

    Good luck with it.

    Cheer.

    Mick Murphy - Microsoft partner

  • Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

    Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

    Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Data recovery, if/before you reinstall:

    1. slave of your hard drive in another computer and read/save your data out there.

    2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

    3 Alternatively, use Knoppix Live CD to recover data:

    http://www.Knopper.NET/Knoppix/index-en.html

    Download/save the file Knoppix Live CD ISO above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://isorecorder.alexfeinman.com/isorecorder.htm

    Download the Vista software from the link above.

    After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

    Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

    Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.

    Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

    When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

    Click on the icons of hard drive to open and to understand which drive is which.

    Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

    Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows 7 is hung up on the Welcome screen after deferred journal

    My problem is similar to what in the http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/windows-7-hangs-up-at-the-welcome-screen/144a1b42-3b5d-4cf0-b66f-d6c063768b44 except when I connect normally, it does not occur.  It is only if I turn on the computer, go away and come back some time later (say 15 minutes) and then enter the password to connect, it hangs at the Welcome screen.

    Hi Frank,.

    -For how long have you been faced with this problem?

    -Have there been recent changes or updates made on your computer?

    Please check if you face the same problem when recording in safe mode. It is a possibility that one of the non-microsoft application or driver is causing this issue. Start in safe mode and make sure that us. If you are able to start properly in safe mode, we can perform a clean boot in order to find the root cause.

    Step 1.
    a. restart your computer.
    b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
    c. using the arrow keys, select the desired option of Mode without failure.
    d. press the Enter key on your keyboard to start in safe mode of Windows 7.
    e. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows 7 goes into safe mode.
    f. do whatever tasks you need and when you are done, reboot to return to normal mode.
     
    If it works fine in safe mode try performing a clean boot in order to find the cause root.
    Step 2.
    You can try a method clean clean boot to find out which application is causing the problem.
    Clean clean boot.
    a. Click Start, type msconfig in the search box and press ENTER.
    The user account control permission.
    If you are prompted for an administrator password or confirmation, type
    password, or click on continue.
    b. on the general tab, click Selective startup.
    c. under Selective startup, click to clear the load startup items.
    d. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
    e. click OK.
    f. When you are prompted, click on restart.
    g. after the computer starts, check if the problem is resolved.
     
    If the problem is resolved to check what is the cause of the problem, referring to the link given below:
    http://support.Microsoft.com/kb/929135
     
    Also, you will need to uninstall and reinstall the software problem on your computer.

    Reset the computer to start as usual
     
    a. When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
    b. Click Start, type msconfig.exe in the start search box and press ENTER.
    c. If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
    d. When you are prompted to restart the computer, click on restart.
     
    It will be useful.
  • Windows 8 apps don't be loading not, stuck on the loading screen

    As the title says, I have installed Windows 8 and put to update some drivers and anti-virus. When I go to start and click on any application it will not load. It gets to the loading screen and doesn't change from there.

    Help is much appreciated, thank you.

    Hello

    1. it is just the modern UI apps that did not load.
    2. yes I tried to disable the drivers and antivirus (Kaspersky Internet Security 2013) however apps still has not loaded correctly.
    I tried restarting the PC and reinstall the anti-virus etc, however no difference.
    I actually ended up performing a new installation which sets out all the questions. My PC is now very fast and standard. It seems that the upgrade process has not worked for me. I hope that this thread can help someone else with the same issue.
    Also my Cyborg v7 keyboard does not work with Windows 8, I had to use my old keyboard Logitech G11 place.
    Except that everything seems to work very well and I'm finally take full advantage of the Windows 8 experience.
    Thanks a lot for your help.
  • age of conquerors hangs at the loading screen

    Running windows xp sp 3, the age of the conquerors hangs at the loading screen. I tried all the suggestions in the article and had no success. Age of Mythology Gold edition also fails to load beyond the cinematics (black screen)

    Running direct x9.c

    Other games work fine, just the age of Kings / age of Conq and Age of Mythology - crazy thing is the origin of the Age of Empires loads and runs.

    Hello

    1. have you made changes on the computer recently?

    Method 1.
    It is possible that a third-party application is causing the conflict.
    You are required to perform a clean boot to find the program that is causing this conflict and then disable or remove.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353/en-us
    Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

    Method 2.
    Also I recommend you to update the card drivers video from the manufacturer's website and check.
    Note: You can visit the website of the manufacturer of the computer to get the latest drivers for Windows XP and install it.

    I hope this helps.

  • I can't get to the loading screen!

    Well... I go to the login screen and charge it up. It goes to the Windows loading page, (if you know what I mean, I'm talking about the small bar, where the green square comes and goes), it's just sitting their forever coming and going.

    So, I put in the disc of Windows Vista and this is what happened.

    1. He went to the screen where it says "Press any key to boot from the CD or DVD..."
    "" 2. it goes to a screen stating "Windows" (the screen is black except for the words "Windows loading" and a small loading bar)
    3. get to the loading screen (where the little green square goes back through the loading bar.

    This is what is happening. IM distraught too why the disc will not work. Please help me. Thank you!

    Stop reposting the same question!
    Stick with the answers in your original Thread.

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/741dfca2-6b27-4A1C-9327-ff0904a6a352

    Answers in another Thread. Mick Murphy - Microsoft partner

  • First Elements 14 stuck on the loading screen

    He worked for a month until today. I add a title to my book trailer when it crashed. I tried to open it up and it gets stuck on the loading screen. It makes it never happened: loading ExporterQuickTimehost.pm

    I'm working on a Windows 10 HP Envy laptop.

    Any help would be greatly appreciated.

    DeidreadobeElements14stuck.jpg

    Hi pascalou,.

    Can you please tell us what is the amount of memory that the application supports, by checking in the task-> process manager. Also, remember the name of the title which had caused the crash?

    Have you tried to reboot the machine and then try?

    -Odette

  • Satellite T130 - stuck on the loading screen - new hard drive required

    After a message on the screen saying back up your hard drive, it will fail quickly and pressing F1 it seems so stuck on the loading screen. I'm not too good with computers. I just have to buy a new hard drive to get the laptop working again, or is much more complicated than that. My guess is this one.

    Thanks in advance for any help provided

    The first question is: did you create recovery media (USB key)?
    If do not do this if for a long time your HARD drive works OK. original recovery image is saved on the HARD drive, but you must have it USB backup that you can use to install if the disk needs to be replaced.
    Do it as soon as possible. More info on what you can read in s operating manuals.

    What to do with the HARD drive? In my opinion if long as it works it has no reason to panic. Use your laptop as usual. If you notice some performance or more error messages problems I think that you should replace it.

    Replacing the HARD drive doesn't have to be so problematic. HARD drive cover must be placed in the lower corner of your laptop. The smallest is RAM and cotyledon should be for the HARD drive. Check it out.

    Before do you that this is remove the battery and unplug your computer laptop AC adapter / CC.

    If you have no experience with such things please don't made some risky step. You can damage something.

  • Skype is stuck on the loading screen!

    My Skype is stuck on the loading screen! I used to have this problem but I fixed it by reinstalling. I'm on version 7.25 (.0.106) and it does not stop. I have java to work on IE and updated manually.

    What firewall and Antivirus applications are installed on your computer?

  • Application of music stuck on the loading screen

    Hello

    I have an iPhone with iOS 9.2, and for some reason 6s why I opened the music app from Apple, it stays on the loading screen and does not open. Left for more than 15 minutes and nothing happens (and Yes, I am connected to WiFi and the internet works fine on my phone). Please notify.

    Best,

    Hussam

    Force to leave the app and/or reset the phone by pressing the home button and the power/sleep at the same time until the Apple logo appears. No data will be lost.

  • I have xp pro I have activated telephone went through all the steps said active windows computing took me to the login screen, but when I try to log in, it tells me I have activated windows

    I have xp pro I have activated telephone went through all the steps said active windows computing took me to the login screen, but when I try to connect, it tells me that I need to activate windows so I click on activate the itr tells me that windows is already activated, then takes me in the newspaper and did the same thing

    To delete the message you are already enabled, you can force the activation on reboot. If the wpa.dbl and wpa.bak are damaged, they can cause a problem.
    Restart in 'Safe Mode '.
    Rename wpa.dbl and wpa.bak files located in the the\Windows\system32 folder
    Now, the message must be deleted, and you can now re-enable. TaurArian [MVP] 2005-2010 - Update Services

Maybe you are looking for

  • Updating BIOS for Satellite A300/600

    Hi all I have a Satellite A300/600 (PSAG4A - 02600M), that I just installed W7 x 64 on (I did a clean install). I am upgrading the drivers according to the Web from Toshiba website. I noticed there is an upgrade of the BIOS to version 1.8 - I am runn

  • Question about LDP LVT22V10...

    Hello. I want to try the LDP in Multisim.  I have a few PLDs laying around and I would firstly like to simulate.  I use a program called WINCUPL to generate code for .jed. I tried looking for a way to 'program' LVT22v10 Multisim with my .jed file but

  • Application not found Error Messages

    Application not found error message Hi,. I recently had a virus on my Windows XP which I removed with Norton Internet Security.  The virus was called "XP Antispyware 2010".  After that I took it with the version of Norton Internet Security 2010 newly

  • Problem of adding in QML - 'var' statement

    Hello I have the following QML code (syntax copied from "picker custom - cascadescookbook" sample) which returns a result in a variable 'cost' and then gets poster in a predefined textfield {}. Text property. var cost = (weight * grade.costkg) + fini

  • How blackBerry Smartphones in Contacts, Research Notes?

    I use the 'Notes' field extensively in my Contacts and I've always been able to easily search for simple text for the keywords that I place in the Notes field with all my previous smartphones like my iPhone or Treo.  How to search those keywords text