Windows xp infected... blue screen with "fatal system error"... connection ended unexpectedly... 0xc0000135 status... any ideas?

as indicated above in the title...

That is what the message really says or does really say something like this:

STOP: c000021a {fatal system error}
The Windows logon process ended unexpectedly with status 0xc0000135 (0x00000000 0x00000000).
The system has been shut down.

You will tell us something about your system?

Tags: Windows

Similar Questions

  • Had to reformat my hard drive, now when I try to reinstall Windows XP I get a blue screen with this code at the end 0x0000007b.

    has had to reformat my hard drive now when he star0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000)

    has had to reformat my hard drive, now when I try to reinstall windows xp, I get a blue screen with this code at the end 0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000) how to solve this problem

    Hello

    I saw the 0x0000007B BSOD caused by trying to install XP on a disk hard while the BIOS is designating the reader as AHCI instead of IDE. XP has no native AHCI drivers, resulting in a stop 7B. Unless the PC had originally Vista or Win 7, but it might be useful to check that it is not likely.

    If the BIOS is set to AHCI, you could do one of three things (depending on whether your PC has a floppy drive)...

    1 find the Setup F6 disk on AHCI support at installation time (start with the manufacturer's website if you do not already have such a thing). Watch the very hit F6 prompt early in the installation process.

    2. change the setting in BIOS on IDE / ATA

    3. create a new "slipstreaming" installation disc drivers AHCI in the existing installation disc, see http://www.nliteos.com/index.html

    After the back if your BIOS is IDE / ATA

    Tricky

  • whenever I try to install windows xp I have blue screen with the following error: 0x0000007e

    Original title: blue screen

    Hello

    I have format my laptop and now whenever I try to install windows xp, I get a blue screen with the following text
    error: 0x0000007e (0 x 0000005, 0x808c4de1, 0xf78da150, 0xf78d9e4c).
    I try everything, I remove the memory modules RAM, resetting the bios, etc, nothing works.
    can someone help me?
    Laptop is a toshiba L20-153
    Thanks Joakim

    Hello

    These error messages may be due to hardware problem.

    The methods of troubleshooting provided in the below article might help you.
    How to troubleshoot a Stop error 0x0000007E in Windows XP
    http://support.Microsoft.com/kb/330182

  • Blue screen with * Malfunction__Call Hardware put an end to your supplier of material for pension * system *.

    I have a laptop Dell M1330 which is about 3 years old. This problem has happened several times and I was generally able to reboot to make it work for a short period.  I tried to change the RAM and that did not help.

    Now, after the last blue screen with * hardware malfunction call your hardware support vendor * the system stopped * error - the laptop even activate no more.  Is no longer under warranty.

    How can I fix - bearing electronic Fry would be reasonable?  The cost would be prohibitive for that I'm better of just buying a new laptop?

    Thanks for the advice of someone.

    If the power, you get nothing on your splash screen (Dell Logo, setting the Bios for the press, etc.), seems to be hardware related.

    As for that, I would only guess from here.

    If you go anywhere, take to choose a reputable local computer repair shop, not a chain of stores type of configuration.

    Someone else here may have a better idea for you, as to what is wrong.

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows 8 Pro - blue screen with CPD Watchdog continuing Violation coming

    I just installed Windows 8 Pro four days ago on my new PC (two months) that came with Windows 7.  I randomly get the blue screen with Violation of CPD watchdog, and the PC restarts.  It is very frustrating and never had this problem with Windows 7.

    Also, on my desk, get Ezupdt window warning and I was wondering if it is related?

    Hello world

    Problem solved.  My free version of AVG 2012 was the root cause of the problem.  I was able to get a free through Microsoft consultation as my warranty period of Windows 8 is still valid (less than 90 days).

    Time AVG has been removed, the problem has gone.

  • Windows crash - big blue screen with a sad smily comes then it reboots sometimes

    Hi all, I bought an acer Aspire V3 - 772G with 8 windows pre installed. the thing is while in the middle of something, a blue screen appears just saying that your pc just came across a problem, gives error names such as IRQ_NOT_LESS_OR_EQUAL, look for this error on the internet later... This has been driving nuts me lately. I thought that the problem was with windows 8, so I've upgraded to windows 8.1 but still sometimes. How the hell can I solve this problem? all of the suggestions. What exactly is the problem? any help is appreciated in advance.

    After spending about $ 1,000 on the computer I wasn't expecting this kind of errors.

    Thank you.

    Yes, too common.

    as suggestion, if you are still under warranty, call Acer customer service, probably isn't a hardware issue.

  • Blue screen with the following error: ntkrnlpa.exe & win32k.sys

    Hello. I tried to play Tomb Raider 1 for the last two days and it won't let me. (Windows)

    So I run the program BlueScreenView and he tells me these

    http://i42.Photobucket.com/albums/E310/Morgoth_Bauglir/1_zpsd42f1ca0.jpg

    http://i42.Photobucket.com/albums/E310/Morgoth_Bauglir/2_zps7368d724.jpg

    Advice as to what I should do? Thanks in advance!

    EDIT: How can I show you guys the minidump files? I want to, but I don't know how. Where can I find em?

    After sixteen days, I found the solution to the problem.

    Run directly worked!
    Here's how I did it:

    #1
    I used image (game.gog) file that is copied into a simple directory GOG, I did without spaces (for example C:\dosgames/tr1)
    Then I renamed to. ISO and also copied the other files in the folder TOMBRAID (exe etc.) and mounted the entire folder on dosbox directly. (just drag and drop the folder for your shortcut dosbox and he will do it himself)

    #2 proceeded to mount the image file (I named it TR1. ISO) with the imgmount d 'x:\path\TR1.iso' t iso command
    #3 now that the image file is completely loaded on dosbox, everything you have to do is type the name of the .exe, for example, type "tomb.exe".
    #4 to play the game.

    Please mark this (my own answer) as an answer because I'm not myself! Thanks to all who helped me without worrying!

  • Blue screen with the 0xc000007b error code.

    Original title: installation of WIndows 8 (BSOD) issues

    Photo of error code:

    https://SkyDrive.live.com/redir?RESID=3EF5647F35E62E6E! 3019

    Using the EFI install Windows 8

    1 disc ssd of TPG

    Drive HARD 2 MBR disk

    Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:

    Silakan is bahasa Anda dari daftar dropdown di wanted menulis pertanyaan Anda dalam bahasa pilihan Anda untuk bagian bawah. Yang diposting di adalah bahasa Inggris untuk Anda Forum. Jika Anda tidak menemukan bahasa yang diinginkan above, supports opsi untuk tambahan international ditemukan dengan mengikuti link di bawah ini dapat map:

    http://support.Microsoft.com/common/international.aspx

  • Gateway Windows 7: stop blue screen during the installation of Windows 7: 0 x 00000024

    OK, I've had so many problems with this computer and I would love to have the support of the community.
    I have a Gateway desktop that is labeled for Windows vista. I had already installed Windows but a virus brought me to uninstall. I don't have the disc, but I have a flash drive with windows 7 on it. So I have my computer to run the player flash start run the windows setup program. I get to the part after the selection of my hard drive. It comes down to 50-60% full, and then it stops at a blue screen with stop code error 0 x 00000024 (0x0000000000190FB 0XFFFFF88003B8C269 0XFFFFF88003BAC0 0XFFFFF8000D292FOD) I have searched and searched for a solution but none to my knowledge, I am only 16 and very bad so I can not affored a new computer, or a repair of $75. Please when replying to this is so simple and stright forward. Thanks a lot for taking time outta your day to help me.

    Pearen

    These were related to the Extensible Atheros athr.sys wireless device driver. I would re - install newer and updated the drivers listed below and updated to update to Service Pack 1

    Older drivers who need to update your driver of athr.sys which is 3 years old inclusive
    SCDEmu.SYS Mon Jul 7 03:40:49 2008 (4871-881)
    PowerISO Virtual Drive driver
    http://www.carrona.org/drivers/driver.php?id=SCDEmu.sys
     
    VSTCNXT3. SYS Wed 15 Oct 20:29:13 2008 (48F68AD9)
    Conexant SoftK56 Modem driver
    http://www.carrona.org/drivers/driver.php?id=VSTCNXT3.sys
     
    VSTAZL3. SYS Wed 15 Oct 20:30:03 2008 (48F68B0B)
    Conexant SoftK56 modem
    http://www.carrona.org/drivers/driver.php?id=VSTAZL3.sys
     
    VSTDPV3. SYS Wed 15 Oct 20:32:04 2008 (48F68B84)
    Conexant SoftK56 Modem driver
    http://www.carrona.org/drivers/driver.php?id=VSTDPV3.sys
     
    Rt86win7.sys Thu Feb 26 04:04:22 2009 (49A65B16)
    Realtek NETWORK card
    http://www.carrona.org/drivers/driver.php?id=Rt86win7.sys
     
    amdxata.sys Tue May 19 13:57:35 2009 (4A12F30F)
    AMD - usually from the Windows 7 DVD storage controller driver
    http://www.carrona.org/drivers/driver.php?id=amdxata.sys
     
    ATHR.sys kills Jun 9 14:04:52 2009 (4A2EA444)
    Atheros Extensible Wireless LAN driver for network card CB42/CB43/MB42/MB43-D-Link AirPlus DWL-G520 Wireless PCI Adapter(rev.) (B) discontinued 2008
    http://www.carrona.org/drivers/driver.php?id=ATHR.sys

    Run (SURT) system update readiness tool and then update to Service Pack 1

    32 bit
    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=3132
    64 bit
    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=20858

    Now updated for Service Pack 1


    http://Windows.Microsoft.com/installwindows7sp1

    Learn how to install Windows 7 Service Pack 1 (SP1) http://windows.microsoft.com/en-US/windows7/learn-how-to-install-windows-7-service-pack-1-sp1

    Additional resources:

    http://Windows.Microsoft.com/en-us/Windows7/uninstall-SP1
    http://Windows.Microsoft.com/troubleshootwindows7sp1

    BugCheck D1, {30, 2, 0, 902658a 5}
    Probably caused by: athr.sys (athr + 428a 5)
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    BugCheck D1, {30, 2, 0, 918618a 5}
    Probably caused by: athr.sys (athr + 428a 5)
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    BugCheck D1, {30, 2, 0, 94c448a5}
    Probably caused by: athr.sys (athr + 428a 5)

  • Photosmart HP B210a more: HP Photosmart Plus B210a shows a blue screen with error B8145558 and restart.

    For two weeks now my HP Photosmart Plus B210a was wrong to behave. Until that time, I was a happy user, but since it says there is an error in the printer and that I should turn it works again.

    Putting out voltage is actually not possible using the button, as this will trigger a reboot, ending up on the same screen as before. During the start cycle, I have a brief moment where I can access the regular menu before it shows a blue screen with the B8145558 error code. 2 seconds after it is shown, a white screen appears with the title of printer error and the message to reboot.

    So far, I have cleaned the print head and the connections of all dirt and residues. I even managed to start and finish in a copy process, before it gives me the error. However, the error will come, and then it's over.

    Someone has encountered this problem before? Currently, I find only 1 reference to this error in Google and not on this site. Any suggestions that I could try?

    Hi @kootstra,

    From your description, I suspect there is a problem with the firmware that may be irreparable. We can try a reset, but because the printer will not stay on very long main screen until the error appears that we are not able to access the menu of support, we need to reset.

    I'll send you a PM (private Message), but before I do, please see the HP Privacy Statement.

    This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

    There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

    A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

    Reset the printer: what you need to know

    Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  • I get the blue screen with the exception of system Service in Windows 8. It seems that many people have of it.

    I get the blue screen with the exception of system Service in Windows 8.  It seems that many people have of it.  I can't use my computer without losing all the data every few minutes.  It is brand new.  Fix?  It often happens with Firefox, but other times too and restarts sometimes when you type an e-mail in the e-mail of Windows 8 program.

    For this recent System_Service_Exception error, if you have an AMD graphics card try the next tool from AMD to try to get the latest graphics driver:

    http://support.AMD.com/us/gpudownload/Windows/pages/auto_detect.aspx

    According to me, a recent update of Windows, maybe the 2778344 which updates win32k.sys to the 6.2.9200.16503 version, could cause a conflict with the AMD graphics driver.

    Many users report the same error recently and so far have all AMD/ATI graphics cards.

    If all goes well the graphic driver update will help.

    If the problem persists, consider uninstalling 2778344.

    Then, at the moment, 'hide' 2778344.

  • Error blue screen Stop: c000021a {fatal system error}

    I am unable to get my computer after the Windows XP screen without a screen blue, continues to restart.

    I was able to get to the Windows Advanced Options menu and was able to "Disable automatic restart in the event of system failure" to get the full error message.
    Stop: c000021a {fatal system error}
    The Session Manager initialization system process ended unexpectedly with the State 0xc000026c (0x00000000 0x00000000).
    The system has been shut down.

    Twice I was able to get in "Safe Mode", words ran across the screen as they will normally in "Safe Mode", but both times the computer restarted again.

    I tried to launch a repair several times with a borrowed Windows XP disc, every time after the repair, he says that the system contained errors, but had been repaired, but the problem persists, just guard computer restart, stop with the error again in a loop.  Hope this helps.

    CHKDSK c: /p detects errors, I ran this command before asking for help on this site... ut as an update... I contacted Microsoft, given that the problem was an update... I received a new operating system CD, crossed the same repair with the new CD with Microsoft... Talked to five different people... Kings different phone calls... the Division to the top to the box start... BSOD... But I won't give up easily... I'm back in my BACK screen... nd was finally able to repair the operating system... The problem was due to the CD have installed IE6 repair who wrote too my IE9... including the confusion in the trunk-to the top.... went on the computer is not not able to recognize Windows Explorer... etc etc etc.

    Nine days later... I'm back running... Phew!

    Thanks for trying to help...

    I work on computers in 10 - 20 Sep... It was rough...

  • Blue screen stop: c00002 / a (fatal system error)

    Blue screen stop: c00002 / a (fatal system error)

    the windows login process ended unexpectedly with status 0xc0000005 (0x00000000 0x00000000) the system has been shut down.

    I have dell windows XP home service Pack 3 computer.

    I had a problem with security thinkpoint and called microsoft and after they had me take measures running a couple different scanshttp://live.sunbeltsoftware.com/download VIPRERescue andwww.eset.com virus more microsoft had click me start, run and type in the press temp ok delete all files, run and type prefetch and delete all the files, run %Temp% remove all the files then empty the trash restart and everything should be ok.

    the computer starts fine until I stopped and tried it begins again, same blue screen problem, I went to safe mode and don't start running and temp, prefetch and %Temp% remove empty the Recycle Bin and restart and computer ran fine, after the 2nd screen blue again.

    I'm now working on the computer and if I press start, run make temp, prefetch and % temp % and delete and empty the trash before turn me computer turned off it will start very well, if I don't do the temp, prefetch and %Temp% steps that I will get the blue screen at the start.

    How can I solve this problem and get rid of the blue screen for good message?

    Hi C_O_A_C_H_11,

    Perform the last known good and then restart your computer and check if you receive the error message. You can check the link below:

    How to start your computer by using last good known Windows XP Configuration:http://support.microsoft.com/kb/307852

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Computer stops with a blue screen with error fatal when the iPhone is connected

    I know it may not related to windows but I have tried other sites on this issue. My computer stops and a blue screen appears with the message saying fatal error when the iPhone is connected. I tried with or without iTunes installed.

    First without iTunes installed, windows will be asked to USB drivers for the iPhone, but I couldn't find anything on the Apple Web sites if I click No., a message appeared, saying that it might not work properly because he could not recognize my device. Second, I have the latest version of iTunes installed, windows began to recognize my iPhone but stop immediately after that with a blue screen fatal error and messeage saying updating the BIOS. Updated the BIOS of the computer, but nothing helped.

    My computer runs on Windows XP Home Edition SP3, processor Intel Core Duo 1'66 GHz, 2 GB Ram, Intel GMA 950, Intel 945 GM chipset.

    I thought that it requires no USB driver for iPhone on Windows or same iTunes unless I wanted to use it for synchronization or characteristics. Please forgive me if I'm wrong, because I tried it on other computers and it had no problem with the USB drivers and Windows can install by itself.

    Thank you.

    Hi 1980ckc,

    1. have you tried to connect the iPhone to a different USB port?

    You can check out the apple support link and check if it hleps:

    iPhone, iPad and iPod touch: Windows displays a blue screen message or stops when you try to connect to your device.

    http://support.Apple.com/kb/TS1502

    Also check out the apple discussion link:

    http://discussions.Apple.com/message.jspa?MessageID=10339681

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Computer hung over the Windows, restarted, update now it does not start even with the installation CD, Get blue screen with the stop message.

    Hi, I installed a Windows update when my computer froze, so I turned it off and back on, now I can't even boot to the installtion disk supplied with the computer. When I hit F8 reapeatedly and select one of the available options, the computer contiually restarts and will not even go into safe mode. I tried hitting ctrl-alt-del, which brings me just for the system configuration menu. I even tried a software that is supposed to start any computer with any problem, and I get the same results I get with the installation CD. (Blue screen with error message: STOP 0x0000c1F5 (0x00000000, four times).) I can't do anything with it, can you help me!

    Windows Update Forum:

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly understand exactly what happened when you tried this update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

Maybe you are looking for