Windows XP install error "File\i386\C_437.nls could not be loaded. The error code is 7. Setup cannot continue. Press a key to exit. "

Similar Questions

• I get the error ' file \i386\ntkrnlmp.exe could not be loaded error code 32768 is Setup can not continue "when you try to reload windows xp on a computer problem. What should I do?

  I'm trying to "sweep" and reinstall windows XP pro on a computer that has had problems. I get the error ' file \i386\ntkrnlmp.exe could not be loaded error code 32768 is Setup cannot continue to press a button to exit "as soon as I got the boot from the cd (and actually after a long break). Help, please!

  Hello

   
  Try the steps listed in the link below and check if it helps:

  "Ntkrnlmp.exe could not be loaded. The error Code is 7 "Error Message occurs during installation of Windows: http://support.microsoft.com/kb/318729

• File\i386\C-437.NLS could not be loaded. The error code is 32768

  Would somebody get out me of my question below?

  When I set up my operating system professional Window XP, an error message popped up as "File\i386\C_437.nls could not be loaded. The error code is 32 768. Setup cannot continue. Press any key to exit. "It's a brand-new product of geniue which I bought in Singapore from Microsoft on the Web.

  Now, I want to have the problem fixed so that I can be able to configure system. Thank you very much.

  Hello

  You can clean your system by using the disk cleanup utility (i.e. remove unwanted files from the system). I suggest you return the item mentioned below.

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

  I also suggest you to extend the system C:\ drive and check if the problem is resolved.

  The partition size is extended, but the file system remains the original size when you extend an NTFS volume

  http://support.Microsoft.com/kb/832316

  How to extend a data volume in Windows Server 2003, Windows XP, in Windows 2000 and in Windows Server 2008

  http://support.Microsoft.com/kb/325590

  How to use disk management to configure dynamic disks in Windows XP

  http://support.Microsoft.com/kb/308424

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• "Reinstall windows xp home edition__\i386\biosinfo.inf could not be loaded."

  OP: reinstall windows xp home edition

  I am trying to Setup. I changed the BIOS to read the CD of resettlement (never been used). I pressed F2 when starting and then "press any key to boot from the CD-ROM. I'm sure I did it correctly, as I did a Windows XP reinstall on another computer before with no problems.

  Anyway, then I get this message:

  File \i386\biosinfo.inf could not be loaded. The error code is 47872. Setup cannot continue. Press any key to exit.

  What is the problem and how do I get to the installation?

  see if it will let you enter the recovery console, This will tell you how (option 2)
  When you get the recovery console, type 'copy c:\WINDOWS\ServicePackFiles\i386\biosinfo.inf c:\WINDOWS\inf' without the qoutes. There should be a space between the copy and the c: and the first destination (at the end of the inf of the first part) and the second (just before the c: of the second) another one, all this should be no space. If that doesn't take care of the problem, then heres how do the installation of repair you asked
  http://www.michaelstevenstech.com/XPrepairinstall.htm http://support.Microsoft.com/kb/315341       

• Get the error during the installation of Windows XP Professional: a fatal error has occurred. Setup cannot continue.

  I get the following error message when you install Windows XP Professional: a fatal error has occurred. Setup cannot continue. Please contact your support representative or a seller/provider untorised. Press to stop the system. I have real service pack 1 XP and the restore CD. After the restoration CD Formate the hard drive and installing Windows starts, he cannot continue and cela happened on two different PC (HP dx2000 and HP dx2300MT. Help, please

  Hello

  As has happened on two computers, I would look on the disc as the problem.

  "I have genuine XP service pack 1.

  What is the exact drive do you use?

  See you soon.

• Loading of Windows XP on a Dell Inspiron 1300: "file \ntkrnlmp.exe could not be loaded disk #2 (code 7).

  I'm reloading Windows xp home edition to a formatted hard drive and floppy disks. The error ' file \ntkrnlmp.exe could not be loaded disk #2 (code 7) "makes its appearance. What should I do to correct this?

  I'm reloading Windows xp home edition to a formatted hard drive and floppy disks. The error ' file \ntkrnlmp.exe could not be loaded disk #2 (code 7) "makes its appearance. What should I do to correct this?

  Please read the steps of troubleshooting for that mistake HERE. If you want more help back post.

• Cannot start Windows Mail because "file MSOE. DLL could not be loaded. " System files corrupted...

  I have problems starting Windows Mail because «file MSOE.» DLL could not be loaded. " I ran the SFC function, and after checking my file system, he said there was some corrupted files, and some of them could not be fixed.

  Any suggestions on what I might try next?

  Thanks in advance for your help.

  Hello

  Make sure that Windows Mail is not running - check the Task Manager - right click on taskbar - task manager

  Download WMUtil - SAVE - DECOMPRESS go to where you put - it - right click RUN AS ADMIN

  http://www.oehelp.com/WMUtil/

  Check #3 and WinMail commentary by the author of WMUtil
  http://www.oehelp.com/OETips.aspx#3

  More expert here:

  Discussions in microsoft.public.windows.vista.mail
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Windows.Vista.mail&cat=en_us_fdf138d6-427A-48D6-84dc-a91a6c9fbb45&lang=en&CR=us

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Event 45, volmgr. Windows 7 x 64 SP1. "The system could not sucessfully load the crash dump driver."

  The crash dump driver fails to load at startup.  When the system crash it does not blue screen and reboots the system.  I want to get it going so I can read the crashdump...

  There is a fix out there for pre Windows Vista SP1 that appears very relavent but will not be installed (by his design of the correction).

  Details below...

  Log name: System
  Source: volmgr
  Date: 18/05/2011 08:54:37
  Event ID: 45
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Cryogen
  Description:
  The system could not sucessfully load the crash dump driver.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      45
      2
      0
      0 x 80000000000000
     
      39071
      System
      Cryogen
     
   
   
      \Device\HarddiskVolume3
      0000000001000000000000002D0004C003200000BB0000C000000000000000000000000000000000
   
  

  Name of the operating system Microsoft Windows 7 Ultimate
  Version 6.1.7601 Service Pack 1 Build 7601
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of the CRYOGEN system
  System manufacturer system manufacturer
  System product name model system
  System Type x 64-based PC
  Processor Intel (r) Core i7 970 at 3.20 GHz, 3201 Mhz, 6 Lossnay, 12 or logical processors
  BIOS Version/Date American Megatrends Inc. 1301, 16/11/2010
  SMBIOS 2.5 version
  Windows directory C:\Windows
  System directory C:\Windows\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "6.1.7601.17514".
  Cryogen\Charles user name
  Eastern Daylight Time zone
  Physical memory (RAM) installed 24.0 GB
  24.0 GB total physical memory
  18.1 GB available physical memory
  48.0 GB total virtual memory
  41.8 GB available virtual memory
  Page file space 24.0 GB
  File E:\pagefile.sys

  Drop the question above actually lead to what may be a solution... The fix for Windows Vista pre SP1 fixes an issue with the (cloned) dynamic disks used to store the paging file.  I have two drives on the clone (E:\) which the system information noticed the location of the swap file.  I put the pagefile drive to C:\ in the event where it was the same problem, such as reported in the hotfix, but it has not fixed the problem...  So I assumed that this fix has been exceeded and a coincidence. But the information system showed the swapfile E:\, my dynamic disks...

  What has removed the error is "double adjustment" the return to C:\ drive.  Apparently once is not enough.  I put the pagefile on C:\ managed and rebooted system.  Then I noticed the mistake of volmgr came from miroir3 (second player in E:\) still info system showed the swapfile on C:\.   Weird indeed.  I went and be given the C:\ drive as the system swap drive to managed by activation/deactivation/Executive every car out of the current value, and then back to the desired direction.  After having done that and restart once more the error no longer appears in the event viewer at startup.

  The only thing worse than a BSOD, no BSOD.

• A general error occurred: could not connect with the password of administrator of vim cannot configure VIM account on the host

  Community salvation.

  Story: I was called to look at the configuration of vSphere for a customer. When I started looking, I noticed several problems in the environment of the person who has put in place initially. I've been noting but have done nothing to fix these up to the...

  A question that I've seen is that the server vSphere does not apper communicate properly on ESX 3.5 servers. The error message is similar to a post on this forum ( http://communities.vmware.com/message/1450789?tstart=0) however the same method of solution did not work.

  Currently I have two ESX hosts connected to a console vSphere. The Console displays the disconnected hosts and the error points to the problems with the VPXUSER account. I found

  I searched and found several articles with similar questions, so I chose a course of action

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1007132

  http://communities.VMware.com/message/1168241

  As a note - vSphere client connections toESX welcomes also directly works very well - don't show no problems and everything seems fine.

  So - my first actions were to disconnect and reconnect one of the hosts.  The operation failed with the error "a general error has occurred: unable to connect with the password of administrator of vim cannot configure VIM account on the host. After that, I followed the elimination of the VPXUSER process, restarted the agents and you reconnect the server for vSphere - to the same result. I then deleted the ESX host, removed the VPXUSER, restarted the agents and added that the host ESX back once again - but no change - the same exact error message. I don't see the VPXUSER ID are re-created by this process - so I guess that ESX and vSphere should know the ID and the password.

  Nothing shows up in the var for this - but one of the articles above explains that as a result of the use of the PAM modules.

  Just for fun, I also tried using the ROOT password and reallowing ROOT to connect via SSH - but I got the same failures. I also tried lifting the VPXUSER ID privleges but - same questions.

  If - goes here - any ideas? I can give other details or screen caputres

  ESX3:

  #%PAM-1.0

  1. Automatically generated by esxcfg-auth

  /lib/security/$ISA/pam_unix.so account required

  AUTH required /lib/security/$ISA/pam_env.so

  AUTH sufficient /lib/security/$ISA/pam_unix.so likeauth nullok

  AUTH required /lib/security/$ISA/pam_deny.so

  attempts at password required /lib/security/$ISA/pam_cracklib.so = 3

  shadow md5 password sufficient /lib/security/$ISA/pam_unix.so nullok use_authtok

  /lib/security/$ISA/pam_deny.so password required

  session required /lib/security/$ISA/pam_limits.so

  session required /lib/security/$ISA/pam_unix.so

  ESX4

  #%PAM-1.0

  account required pam_per_user.so /etc/pam.d/login.map

  AUTH required pam_per_user.so /etc/pam.d/login.map

  /etc/pam.d/login.map pam_per_user.so password required

  /etc/pam.d/login.map pam_per_user.so sign in required

  -KjB

• When I install windows xp it shows error 'file \i386 \c_437.nls cannot be loaded. The error code is 4096 "?

  I have different files and folders in the other hard drive and also the F: drive is already installed with Linux.My c; disk space is only 8 MB. How to install windows xp?

  Check out these links:

  Error: "C_1252.nls file missing or corrupt" during startup
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;830088&product=winxp

  http://forums.techguy.org/Windows-XP/843866-horrible-virus-survives-reformat.html

  http://www.computing.NET/answers/Windows-2000/installation-headaches/55103.html

• Windows Vista update (August 2010) left my laptop could not connect to the Internet via my home wireless network

  Yesterday, on August 13, I installed - as guest - a number of updates to Windows Vista on my laptop. It seems that most of them is security updates. There are 16 in total, of which 9 are titled "A security update for Windows Vista". (For reference, they include KB978886, KB982214 and KB2079403).

  Since the completion of this facility, I can't access the Internet using this laptop. I have a wireless router that works very well. Our other two laptops families (using Windows 7 and other Windows XP uses) are the two beautiful connection today by using the wireless router, so I know that the rest of the installation is fine.

  Immediately before installing updates, everything worked very well; Since then, the problem exists. I made no other changes of configuration, facilities or any measure that might have caused this.

  Please tell us how I can remedy this problem. So far my best idea is to uninstall all updates. I really don't want to do it, because I guess they are important!

  Thank you!

  [FYI - Norton Internet Security includes a third-party firewall (Norton Personal Firewall) as well as an anti-spyware component.]

  Looks like you have a hijackware infection on your hands there, Tim. That being said...

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows xp professinal could not be loaded \i386\ntkrnlmp file could not be loaded. How can I fix it so that it loads?

  Cannot load windows xp because the \i386\ntkrnlmp file could not be loaded.  How can I fix it so I can use the computer?

  Hi RIVTOM,

  ·         Remember to make changes?

  ·         Can you start in safe mode?

  The error you mentioned could be either because of incorrect settings basic input/output system (BIOS) or a faulty memory random access (RAM).

  Method 1: Restore the default BIOS settings and see if it helps. Consult the manual or manufacturer to do so.

  Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  Method 2: If you understand and are confident the material processing of the computer, and then remove the two RAM modules, noting that slot is used for the module in which, clean the electrical contacts on the modules.

  Replace the first module (if there is more than one) take precautions attempt to restart your machine with just the module of memory installed, see how you go. Do the same with the other module (as applicable).

• Error.' c:\docume~'\earl\locals~1\temp. A temporary file needed for initialization could not be created or cannot be written in ' when try to run 16-bit programs in windows xp computer at home.

  original title: 16-bit windows subsystem error

  I was able to run 16-bit programs on my computer with windows xp home edition. now when I try to open the program I get a 16-bit windows subsystem error. c:\DOCUME~'\earl\locals~1\Temp. a temporary file needed for initialization could not be created or cannot be written to. Make sure that the path exists, and the space is 'close' to teminate the application available.choose

  Hi EarlBettencourt,

  You can follow this link & check if the problem persists:

  Error message when you install or start an MS-DOS-based program or 16 - bit Windows based

  Hope the helps of information.

• Windows 10 has been approved and has been downloaded but 2 does not install error codes, 80070002 & 80246007.

  Original title: windows updates 7

  Updates to the computer have been OK until MS net framework has been improved from 3.5.1 to Ms. Net framework 4 who do not go in. several attempts have been made to install but still got error codes. . Since then, updates only install are removals of malware. Silverlight will not install either.    Windows 10 has been approved and has been downloaded but 2 does not install error codes, 80070002 & 80246007.

  I am at a loss... Anly help would be welcome.

  1. navigate until "C:\Windows\SoftwareDistribution\Download" and delete the contents of the folder.
  2. press on the Windows key + X > click (Admin) command prompt and then type "wuauclt.exe /updatenow.

  Press enter

  3. open Control Panel > Windows Update and Windows 10 should begin to download...

  If this does not work:

  Please be aware, even if you do not get the Windows 10 app, you can always download Windows 10 as one. ISO file, create a bootable copy and update your system.

  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  See the instructions: How to download official Windows 10 ISO files

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

• Code error 0x7E - the file 'autorun.dll' could not be loaded or is damaged. Setup cannot continue. Windows 7 Upgrade installation problem

  I tried to install Windows 7 Home Premium Upgrade, 32-bit version. My current system is an Intel iMac (later), with Windows XP - SP3 loaded as a virtual machine with Parallels Desktop 4.0 build 3848 (according to their website, it is supposed to support Windows 7).

  I allocated enough space RAM and HARD drive of the virtual machine to run Windows 7. No matter what I do, when I try to run setup.exe, I get the error message: "the file 'autorun.dll' could not be loaded or is corrupt. Setup cannot continue. Error code is [0x7E].

  The file 'autorun.dll' is present on the disk.

  I saw on the internet that other people have also had this problem, with or without Parallels Desktop, and get a replacement DVD of Windows 7 program made no difference to them. Nor is it an available answer, I've seen.

  My Windows 7 disc is new, so I was hoping that Microsoft could solve the problem for me?

  Thank you.

  
  

  
  

  OK, so, this response is a little late to come, but if you never solved...

  I just encountered the same problem - editing similar (Mac, Parallels 5 in my case, the SP3 of XP, MS Windows 7 Home Premium Upgrade) - you must make sure that the DVDROM drive hardware is mapped to "D:" on your XP installation. Thus on the Parallels Desktop menu go to devices, CD/DVD1 and make sure that all your actual DVD player is called is selected (should be the vertical entry in the menu) - not true CD/DVD. The reader should then start and auto run.
  I hope this helps...