Windows XP installation is not possible on my Satellite L40

Similar Questions

• you just bought LR6 as I tried to install Adobe says that the installation is not possible because I am running Vista, even if I run Win7 Home Premium on my computer. Any ideas how to solve this problem?

  you just bought LR6 DVD that I tried to install Adobe says that the installation is not possible because I am running Vista, even if I run Win7 Home Premium on my computer. Any ideas how to solve this problem?

  Right click on the file Setup.exe and choose Properties option.

  Then click on the Compatibility tab.

  The value of the Windows 7 operating system and check.

  See the link below:

  trying to install lightroom 6 on windows 7 continues to receive operating requirement not met windows vista not supported

• Windows XP Installer does not not for updates or MS Office 2010. Error says Safe Mode, but I'm not in it.

  Windows XP Installer doesn't work is not for the automatic updates or MS Office 2010. Error says Safe Mode, but my machine is not in Mode without failure.

  When I try to run MS Office 2010, it starts a dialog box "preparing to install...." "even if I had used it for a few years. In the end, it fails and tells me whether I'm in Mode safe or I need to reinstall Windows Installer, I have done several times.

  I can automatically download updates and they seem to be installed, but all fail at the end.

  Any ideas on how to address this problem? Yes, I know that it is probably recommended to buy a new PC, but I need this machine operate fully for the next months. Then by reloading the operating system does not, either. He told me that my XP disc is the wrong version.

  Thanks in advance for any ideas.

  Hello

  1. What is the exact error message that you receive?
  2 have you made changes on the computer before this problem?
  3. all of the updates fail to install?
  Method 1: Make sure that the Windows Installer service is not set to disabled.

  (a) click Start, click run and type services.msc and press Enter to open Services.
  (b) click the Windows Installer service, and then click Properties.
  (c) if the startup type box is set to Disabled, change it to Manual.
  (d) click on OK to close the Properties window.
  (e) right click on the Windows Installer service and then click Start. The service should start without errors.
  (f) click on the file menu, and then click exit.

  Method 2: Error message "Could access the Windows Installer Service" when you install a program in Windows XP
  http://support.Microsoft.com/kb/315353
  Note: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756
  Also note: Please, do not KB315341 (how to perform an upgrade on the spot (reinstallation) of Windows XP)
  Method 3: You can also download the latest version of Windows Installer from the link below:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
   
  Reference: troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation issues
  http://support.Microsoft.com/kb/906602
   
   
  
   
   

• Windows 7 Installation DVD not recognized.

  I'm trying to install Windows 7 on a new PC - no previous operating system. Hard drive is a Western Digital WD800 IDE. CD/DVD is a Sony CRX230ED. The CD/DVD recognizes CDs very well. But I put the Windows 7 DVD in there and it is not recognized.

  CRX230ED's rider to master. BIOS has CRX230ED at the first position in the boot order.

  Tried to start at Bart PE. that works because it loads a CD and not DVD. But I can't start Windows 7 installation because she needs to start in a Windows environment.

  Going nuts.

  This CD player is. You need a combination player that can play CDs and DVDs. If it is a new computer that someone built for you, take because they rip you off. Nobody in his right mind would put a plain CD - RW disc in a computer today. If you compiled yourself computer parts you hang out, pull the reader and the pitch. Replace it with a CD/DVD-RW drive instead. MS - MVP - Elephant Boy computers - don't panic!

• dreamweaver CS3 installation is not possible

  I own dreamweaver CS3 since 2005, 4 years under Win7. After a PC crash, I try to install again, but not possible (the installation file is damaged). FixIt MS can not solve the problem. Still CS3 is old, I use it often. If there are problems on html, I can resolve it manually. How can I install my old CS3 good again?

  After that I completely deleted all the registry entries manually, the installation of CS3 could be made. His works now.

  Before I used the Adobe cleaning tool, but it is not enough, several registry entries remained, the installation CD was not possible.

  Thanks again!

• Cannot start XP installation on Vista Home Premium preinstalled Satellite L40-139

  Here's the problem:

  I bought a new Toshiba Satellite L40-139 in Austria and comes preinstalled Vista. OK, Vista is in German, and I don't know German. But I made a choice to learn German and to start using a Vista. After a month Vista drives me crazy (no language, just for Vista) and I want to just install XP. I didn't need something more.
  I spent more then five days trying to archive this, but without success and I am disappointed, much.

  I put aside all types of teaching and I did a lot of things, but none of them helped me.
  So the problem is like this:
  I made the partition for XP, so I have two partitions as: Vista (C), (D) XP and Datas (G) and my CD/DVD (E :).
  I activated just boot from the CD/DVD, but when I insert the CD and start the installation of Vista it tells me something like this:
  Press any key to boot from CD...
  When I do that, I get a message, which is very fast where it says something like that, (I'm not quiet sure what it says because it's fast):
  Checking your configuration...
  After that, nothing happens, don't know why, I just get black monitor and CD/DVD does not work anymore?

  It's driving crazy me and I can't install XP.
  It seems that does not recognize the CD/DVD, and I tried with several XP bootable CD/s and they work on my desk.

  Can someone help, please, because I'm going crazy?

  If you have installed XP on this notebook L40 Vista you need a BIOS update to the XP version. All that s

• CD/dvd drive and windows update/installer will not work

  Because I'm not on the computer, I am referring to I should be as concise and precise as possible here. The system is Windows Vista service pack 2.

  I'm trying to re format the computer of a friend. Something I've done often in the past. I did two recovery disks when the computer was new, but cannot do recognize the cd/dvd or any other, internal or external drive that I tried. error code 39 is cited in all cases.

  In addition, he said there are three updates to install when I boot on the system to start before these updates are installed only. In fact the windows installer has stopped working. I went into Device Manager and not only it shows conflicts for hard drives, but for multiple NICs also: twelve 6-4 adapters and five ISATAP adapters also Microsoft. I've uninstalled and restarted for all adapters reinstall with the same conflicts. In addition the machine will not be closed correctly in normal mode and I get a blue screen with a message of memory dump. I'm afraid to format the c drive, until I have a way to reinstall the system via a disk drive. Can someone help me please?

  I tried it in safe mode and it stops at least normally but as soon as I restart with networking all the problems are back.

  Hello

  I also suggest you go through the steps in the article and check if that helps.

  Hope that the information was helpful and let us know if you need more assistance. We will be happy to help you.

• w7 on Pavilion elite 020nl installation is not possible

  Hello.

  in 2010, I bought 2 hp Pavilion elite 020nl

  I had to replace the video card and the powersuply.

  Now I bought 2 new hard drives to replace two C WD Blue 1 TB drives

  My problem is that I can't install win 7 on both machines, I get defects such as

  -can not configure windows to run on this computer-

  the original hard drives are Seagate 750 GB

  After looking at the seagate, I see written firmware hp34

  This means that I have to buy seagates? or HP seagates?

  is there a way around it?

  needles to say I am quite frustrated with all this

  Thank you for your time and excuse my English because it is not my native language

  COR

  installation of w7 on Pavilion elite 020nl

  Hello:

  The only suggestion I can offer is to try the following if you have found that windows cannot be installed on this hardware error...

  Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & ProdId = 2101 & DwnldID = 23060 & Keyword = Intel + rapi...

  Extract the files on a usb flash drive.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and hopefully, W7 should install.

• Windows 7 Installer error: "not enough space".

  not enough error windows installation disk space 7.  There are over 200 GB of free space on C:

  You must enable the service of virtual disk before you perform the upgrade, if you encounter this error.

  1. click on start / run and type SERVICES. MSC
  2. search for the virtual disk Service
  3. right click and choose 'properties '.
  4. make sure that the Startup Type is automatic, and then click the Start button.
  5 reboot and try the upgrade again. Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Windows 7 installer does not happen with the Blackberry software

  Running windows 7 ultimate 64-bit
  When you install Blackberry Desktop manager or device software or print to go I following after usual unpacking and choosing msg usa (eng) > can someone tell me what is happening this... Please help

  Windows® Installer. V 5.0.7601.17514

  msiexec/option [optional parameter]

  Installation options
  
  Installs or configures a product
  /a
  Administrative installation - installs a product on the network
  /j [/t ] [/g ]
  Publishes a product - m for all users, allows the current user
  
  Uninstalls the product
  Display options
  / quiet
  Quiet mode, no user interaction
  / passive
  Automatic mode - only progress bar
  / q [n | b | r | f]
  Sets the user interface level
  n no user interface
  b Basic UI
  r reduced UI
  f-full UI (default)
  / Help
  Help information
  Restart options
  /norestart
  Do not restart after the installation is complete
  /promptrestart
  Prompts the user to restart if necessary
  /forcerestart
  Always restarts the computer after installation
  Logging options
  / l [I | w | e | a | r | u | c | m | o | p | v | x | + |. | *]
  i status messages
  w warnings recoverable
  e-all error messages
  a startup of actions
  r registers of the specific action of the
  u user requests
  c initial UI parameters
  m out-of-memory or fatal exit information
  o disk out-of-space messages
  p - Terminal properties
  v performance
  x extra debugging information
  + - Add to the existing log file
  ! -Flush each line in the log
  * - Log all information, except the x and v options
  / log
  Equivalent of / l *.
  Update options
  / Update [; Update2.msp]
  Apply updates
  / uninstall [; Update2.msp] / package
  Remove the updates of a product
  Repair options
  /f [p | e | c | m | s | o | d | a | u: v]
  Repairs a product
  p only if the file is missing
  o If the file is missing or an earlier version is installed (by default)
  e If the file is missing or an equal or higher version is installed
  d if the file is missing or a different version is installed
  c If the file is missing or checksum does not match the calculated value
  has all the files to reinstall the forces
  u all (default) user-specific registry entries
  m all requirements (by default) computer-specific registry entries
  s all (default) shortcuts
  v-runs from source and recaches local package
  Setting public properties
  [PROPERTY = PropertyValue]

  Consult the SDK Windows® install to get additional documentation on the
  command line syntax.

  Copyright © Microsoft Corporation. All rights reserved.
  Portions of this software are based in part on the work of the Independent JPEG Group.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  950093 how to use the System Configuration utility to resolve configuration errors in Windows Vista
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 950093

  What help is available from Blackberry.com?

  How to perform a clean reload of the BlackBerry Device Software for Windows
  http://BTSC.webapps.BlackBerry.com/BTSC/microsites/microsite.do?cmd=displayKC&docType=kc&externalId=KB11320&sliceId=1&docTypeID=DT_SUPPORTISSUE_1_1

  Solution Center technology blackBerry
  http://BTSC.webapps.BlackBerry.com/BTSC/microsites/microsite.do

  General Support Forums
  http://supportforums.BlackBerry.com/rim/

• Windows 8 installation does not?

  I bought windows product key 8 online and wanted to update my sony vaio with windows 7 Home Edition premium, but when I download the installer of windows 8 support that it does not work after entering the key, he said only: "we cannot connect now" but my internet works fine, and I reside in India , but is it a server error that I don't know it please help me. http://Windows.Microsoft.com/en-in/Windows-8/upgrade-product-key-only

  I've updated once that worked fine a few days ago

  Hi Harpreet,

  It seems that this issue is a large part of the area of support for ESD. I suggest you to contact support from the EDD for more information.

  ESD team contacts list is located here:

  http://support.Microsoft.com/GP/ESD-support-phone-numbers

  See also:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/Windows-8-upgrade-we-cant-connect-right-now-please/dc570767-5e8a-4fda-B1F0-dbb2cc46bf0e

  Hope this information helps. Back to us for any problem related to Windows. We will be happy to help you.

• Toshiba LX830 incompatible with Windows 10 - only streaming not possible

  I have "upgraded" to Windows 10 8.1 recently and have lost the ability to send mp3 and mp4, files stored on the computer for my smart TV.

  All attempts to cause an error on the PC and smart TV.

  Microsoft say it is because Toshiba do not have widows 10 drivers compatible for the series of LX830 even if it is only 2.5 years old and came with already installed 8.1.

  A check on the Web from Toshiba site shows that the LX830 does not appear on lists of machines planned for windows version 10 compatible drivers.

  Does anyone know if additional releases of drivers will follow beyond those available to date?

  The site Web of Toshiba said simply that if your model is not on the list, it is not compatible with windows 10 - which is a bit hard for a relatively new machine.

  As far as I know that pilots Win 10 won't come out for units that are not part of the list.
  But how did you send your mp3 / mp4 files on your smart TV?
  What link did you use?

• Satellite A45-S150 starts windows - safe mode is not possible

  My machine locked upward and when restarted, that asked me to make a selection among several options. Safe mode, safe mode network, prompt mode without failure, recent well known parameters and then just windows. It starts windows in these modes. Any help would be appreciated.

  Brad

  What to say Brad. It seems the full Windows XP operating system has crashed!
  Believe me, something like what is happening simply and I think that it s nothing unusual to anyone who use and works with Windows OS for a long time.

  You should definitely try to reinstall the OS from the Toshiba restore CD.
  But this procedure will format your HARD drive and you will lose all files stored on the HARD drive.

  But this is only one possibility to get Windows running on this laptop.

  Check it out buddy!

• 64-bit guest with ESX 4.0 operating system installation is not possible

  Hello guys,.

  I just installed two servers blade full-height M710 Dell with ESX 4.0.

  They definetely support 64-bit, otherwise I think that ESX 4.0 could not run on that host.

  Well, the installation worked fine, they are also connected to our vCenter charges upgraded to 4.

  I tried to install the virtual first with W2K8 R2 64 bit guest OS machine. But offers installing only the x 86 install wizard.

  VT (Virtualization Technology) is enabled in the BIOS.

  What wrong with my configuration or missing?

  Thanks for any response.

  Best regards

  Timo

  Try to select just 2008 R1 64-bit, not R2, it should work very well.

  ---

  If you have found any of my reviews useful please consider giving points to 'Correct' or 'useful '. Thank you!!!

  www.beyondvm.com

• Safari - the third party extensions installation is not possible

  Hello community,

  Since the update to Mac OS X El Capitan 10.11.3 I am unable to install Safari extensions from third parties (like Agilebits 1Password or ublock).

  I can double click on the extension and the weather of dialogue I trust the source appears (it's in German).

  

  But regardless of this choice, I do the extension ist not installed.

  My system is

  • iMac (retina 5K, 27 inches, end of 2014) - 4 GHz Intel Core i7, 32 GB 1600 MHz DDR3, 3 TB Fusion AMD Radeon R9 M295X 4096 MB drive
  • Safari 9.0.3 (since the update of 10.11.3 combo)

  I tried to

  • Restart the iMac
  • Install the 1Password file - 4.5.2.safariextz from different places
  • Remove extended attributes and ACLs to the file downloaded 1Password - 4.5.2.safariextz
  • uninstall all extensions and empty folder ~/Library/Safari/Extensions
  • install the extensions via the Terminal (Open ~/Downloads/1Password-4.5.2.safariextz or sudo Open ~ / Downloads/1Password-4.5.2.safariextz)
  • copy the 4.5.2.safariextz - 1Password directly at ~/Library/Safari/Extensions
  • Re-download the 1Password - 4.5.2.safariextz from somewhere else

  Also, Google showed no relevant problem my problem solutions.

  Currently, I am only able to install the extension directly from the Apple Extensions Gallery.

  The problem is that an extension of the Apple Extensions Gallery 1Password is obsolete and does not work properly with 1Password 6.0.1 (problems on amazon.com and other sites). Also not available in the Apple Extensions Gallery ublock.

  Has anyone else had similar problems and could solve them?

  Best regards

  Gerhard

  I got a solution.

  A reboot in safe mode did the trick.

  The internal caches of Mac OS X, most likely to rebuild...