Windows XP is a huge 96 concert .no downloads or virus help

XP genuine. No temp, no download file, no virus, right click on drive C, R, click the Windows folder, properties, results show a huge concert 96.

HOW TO REDUCE THIS PLEASE

Hi NancyHarvey,

Follow these methods.

Method 1: Run the disk cleanup tool.

Description of the tool in Windows XP disk cleanup

http://support.Microsoft.com/kb/310312

Method 2: Create a new user account.

How to create and configure user accounts in Windows XP

http://support.Microsoft.com/kb/279783

If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.

How to copy data from a corrupted to a new profile in Windows XP user profile

http://support.Microsoft.com/kb/811151

For reference:

How to set performance options in Windows XP

http://support.Microsoft.com/kb/308417

Tags: Windows

Similar Questions

  • running windows 7 64 bit sp1 have 6 GB of ram, but windows says usable only 3.29 concerts

    running windows 7 64 bit sp1 have 6 GB of ram, but windows says usable only 3.29 concerts

    JAC

    Where are you seeing the 3.29 "usable"?  It would be fair that the rest is in fast cache.

  • My last Firefox no longer works and I can't fix it. I use Windows 8. I made the mistake of downloading DuckDuckGo. He immediately took over as my default

    My last Firefox no longer works and I can't fix it. I use Windows 8. I made the mistake of downloading DuckDuckGo. He immediately took over as my default browser and it would not allow me to change back. I realized that I had something that I had not needed so I tried to remove it. It took a morning full of accomplish this chore. I went back to Firefox and found that my tabs were there, but they were opaque and would not work. In fact, you could read what was beneath them. No way to get anything wthout return to the start page of Firefox. I uninstalled Firefox and put it back on and it was always the same thing with the non operation of the opaque tabs. Troops you have good ideas as to how I can get my Firefox working again?

    The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
    Note: This will make you lose all the Extensions, open Web sites and preferences.

    To reset Firefox, perform the following steps:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the button 'Reset Firefox'.
    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    This solve your problems? Please report to us!

  • Update Windows 10 removed my printer software. I downloaded the drivers, but windows won't install it cos

    Update Windows 10 removed my printer software. I downloaded the drivers, but my PC won't will not install because the security certificate for the HP software says windows Defender is not closed or not properly closed. What should I do?

    Hi @Mixawixa

    Spoiler (Highlight to read)

    What browser do you use? Edge?

    Can you try IE or Chrome and see if the problem still exists?

  • I have deleted acidentally Dowloads from the dock. When I restored it I now get a huge page of each download I've ever done!

    I have deleted acidentally Dowloads from the dock. When I restored it I now get a huge page of each download I've ever done!  How to get back to the simple short column of downloads?

    Right-click on the file, view, options (size, type etc.) that appears, choose the ones you like.

  • Where can I get a copy of the Windows XP installation for my sister. His was a virus and I had to format the drive. It's a registered computer

    Where can I get a copy of the Windows XP installation for my sister. His was a virus and I had to format the drive. It's a registered computer. I have it ready for the operating system but I need to download a copy so I can retrieve my CD-ROM/DVD-Rom drive, so I can then bring to its system and reinstall the XP and then if she wants that we can get a windows 8. I use windows 8 on this system, I bought a few months ago and it's satisfying, but I don't understand why when I got it I could do things like using the keyboard of the screen with my fingers, but now I can't even use the keyboard mouse. It won't work at all. In a way I found it better that way at the beginning because I do a lot of typing and it would freeze until I was constantly stressed. I returned to Windows 7 mode I think but not sure.  All I know is that these two things have never worked correctly, so if they are still under warranty I will bring to the Future Shop and maybe they can fix it. I wish I could turn on and off easily so it does not interfere with my writing and study of a language second.

    Ralph Sabean

    E-mail address is removed from the privacy *.

    or * address email is removed from the privacy *

    There is no legal download of XP unless a TechNet or MSDN subscription. I'm sorry.

  • Problem: Windows Security Center gives me a "alert" that my anti-virus is turned off, but I am running Windows defender and Microsoft Security Essentials.

    Windows Security Center gives me a "alert" that my anti-virus is disabled.  I have Win XP Professtional and'm running Windows defender and Microsoft Security Essentials times which I recently uninstalled, restarted the computer and reinstalled more updated.  I read related security problems, but I have not found a match.  I have a screenshot of the Win Security Center Alert, but unable to attach.  It is said: ' Windows found multiple antivirus programs on this computer, but they all report that they could be updated or disabled. " Click on the recommendations for suggested actions... [what I did without success, i.e. update.  «[I uninstalled, stop, rebooted and reinstalled and updated]»

    When I shoot to the top of MSE it says, "protection is enabled, and updated definitions.

    Windows Defender said: "Nothing detected" and "computer running normally."

    Before the uninstall and update, I ran System Mechanic from Iolo, who has done wonders for speed.

    Norman

    When it comes to antivirus software, you want one and only one installed and running on your computer.  Two or more may come into conflict with eachother and degrade performance.  I advise you to uninstall Windows defender and use soley mse.

    also I strongly suggest that you avoid using "PC optimization" tools.  They can help a little, but they often do more harm than good.

  • I bought windows 7 in a store, but my windows xp cannot read the dvd. can I download 7 and use the product key, rather than buy it again?

    I bought windows 7 in a store, but my windows xp cannot read the dvd. can I download 7 and use the product key, rather than buy it again? I bought an old compaq desktop computer, and I want to update.

    It's probably too late because you have unsealed the package, but as you have relatively minor glitch of the material do not have a DVD player, did you use the (free) Windows 7 Upgrade Advisor to determine whether your computer hardware is capable of running Windows 7?

  • I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found." Can help you!

    Original title: cannot find awuvomas.dll

    I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found."  Can help you!

    It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
    I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
    These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
    Here are the detailed instructions that protect you and solve your problem in the 'right' way.
    There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

    You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
    . There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    You can also click file, search to search for logon, or any tab for all or part of the name of the element.
    Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
    Given that your system has or has had an infection, follow up with this:
    Perform scans for malware, and then fix any problems:

    No matter what you use for malware protection, follow these steps:

    Download, install, update and do a full scan with these free malware detection programs at:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
    Restart your computer and solve the outstanding issues.
  • Downloaded the Virus 10 windows installation.

    Downloaded the Virus 10 windows installation. How can I get it my computer

    Hi blhope,

    1 Windows operating system you are using?

    2. What do you mean by Windows 10?

    You can try to run a scan online and check if it helps:

    Check out the link:

    http://safety.live.com

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Windows Vista Home premium all-in-one is downloadable windows 10

    Windows Vista Home premium all-in-one can download windows 10 and run it because I have a windows vista Home premium service pack 2.

    Information system

    I've heard rumors that you can download windows 10 on windows vista and I don't know if its true or not but I also people saying that windows gives 10 free windows for windows vista and windows XP

    Hello

    You buy Windows 10, as there is no free upgrade to Vista 10.

    https://www.Yahoo.com/tech/s/Microsoft-just-confirmed-Windows-10-pricing-everything-know-114542550.html

    Microsoft on Monday said CNET Windows 10 will cost just as much as its predecessor. This means price for Windows 10 will run anywhere from $110 for Windows 10 Home package at $199 for Windows 10 Pro edition. In addition a Pack Pro 10 will allow users upgrade Home Pro for $99.

    http://www.CNET.com/news/Microsoft-prices-single-Windows-10-licenses-at-119-for-home-199-for-Pro/

    But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

    https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

    Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

    "FAQ Windows 10.

    http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

    See you soon.

  • Windows Vista Home premium get error 80070103, code downloads, but do not install, this get almost every day since 4/09 thank you HHnyc

    my history of download/install bed failed.  brief explanation under code 80070103 error reads something like there is a new version of NVIDIA GeForce 7300LE already in place... don't know.

    Run AVG 2013 safety.  used Windows security pak 2

    any ideas?

    Hello

    If you receive the error Windows Update 80070103 while installing updates, you might be trying to install a driver is already installed on your computer or a driver that has a lower compatibility rating that you have already installed.

    I suggest you perform the steps in troubleshooting of these links and check if this solves the problem.

    Windows Update error 80070103

    Error 0 x 80070103 is displayed when you use Microsoft Update or Windows Update Web sites to install updates

    I hope this helps you solve the problem. If the problem persists or if you have other problems with Windows, please post in the Microsoft Community. We would be happy to help you.

  • Windows media player has encountered a problem when downloading the file. for additional assistance, click web help.

    Original title: unable to audio stream.

    Unable to audio stream, "windows media player has encountered a problem when downloading the file.  for further assistance, click web help' web help does not work, clicking web help does nothing (no response from program... a lot of negative response from me) stuck with the big pass... vista 64 bit... a lemon from the getgo... problem after problem...

    Hi Joseph,

    What is the file format of the file you are trying to download?

    This problem normally occurs when the Media player could not play the file downloaded or not supported.

    Method 1:

    Step 1: Here is the list of the formats supported by Windows Media player file:

    Information on the types of media files that supports Windows Media Player:

    http://support.Microsoft.com/kb/316992

    Note: See if the file format is in this list, if it is not there, you may need a third-party codec that can read the file.

    Step 2: For more information about codecs, see article given:

    Codecs: Frequently asked questions:

    http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

    Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Method 2:

    I also suggest you to run the Windows media player Fixit:

    Solve the problems of Windows Media Player video and other media or library

    http://support.Microsoft.com/mats/windows_media_player_diagnostic

    Hope this information helps.

  • I use Windows vista service pack 2 and when I download an attachment to an email and try to print I get this error message: Error Message 0 X % 1 in the message for %2 file

    original title: Error Message 0 X % 1 in the message file for %2
    I use Windows vista service pack 2 and when I download an attachment to an email and try to print I get the above error message.

    How I can fix

    Hi SusanReid,

    1. what email program are you using?
    2. you are trying to download from webmail or any mail client?
    3. don't download you and save the attachment or open it directly?
    4. What is the brand and model of the printer?

    I suggest to save the attachment and then print.

  • Netscape browser to the Microsoft windows media services plug-ins to allow the download of license to play music

    Original title: music license

    How do we install m/soft media services plug ins to allow me to download the license to play music apparently my netscape browser doesn't have the plug in to allow the download

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    I am experiencing this when I try to use Windows Media Player (so recent, but not easy to find the version number) to play a .wma file that I've transferred from vinyl years ago.  My browser isn't FireFox, Netscape.

    I drag the file from Windows Explorer to the playlist in Windows Media Player, and a Web page comes up (http://drmlicense.one.microsoft.com/pdrm/en/welcome.asp?challenge=AAEAATMvJkIGMMWfrmgMxKUeJkQMlzddByxvhfASAwJeI7q50r * BSeNHGXSEmuEa3z9B8i4S!) NLoR3fRr8EAGEbyzSkliIt8lX1pln9bKWLchwWDg0iXnYGPf * BCH4kZ73R5EU2098fvdrcq72igPSRA3mL31! dWNESZJZBTemAFwX6cxUcEaSTAvCODqCFOL259Pw2vPgQ4QXcChw7R2QXrI0! lLE6Q7vFzgpqyDzWpWK2hfbfr5x3rA! Bebc75l2lX3gVmq5Na & DRMVer = 1. "& embedded = false).  The page says:

    -------------------------------------

    A license is required to play this file

    The file you are trying to play was ripped (copied) from an audio CD.

    During the extraction process, the file was "protected". This limits the number of computers on which the file can be read.

    To read the file on this computer, you must download a license (a process called "license migration"). A license is an electronic key that allows to "unlock" a protected file and read it.

    To download a license for this file, click download the license .

    [Button: download license]

    .. then by some Notes.

    -------------------------------------

    When I click on the button, I get a dialog box saying «Netscape browser no not the Microsoft windows media services plug-ins to allow the download of license to play music»

    .. who's actually a dead-end.  I tried the FireFox plug-ins, but it was a waste of time.

    It's annoying, because my vinyl transfer was fair use of album, and my time is precious to me.

    -Eric

    SOLUTION: Is annoying, but switch to Internet Explorer as default browser and go through the procedure described above.  When I did, he received the license, which enabled Windows Media Player play all .wma files in the directory.  (It could be worse - the software could have go me through the process for each file separately.) Other players are still unable to read the files and it's still a nuisance.

Maybe you are looking for