Windows XP lost for all graphics problem

Similar Questions

• Support driver does not"say"windows is looking for a solutiondriver problem

  Original title: windows 7

  For a month, whenever I boot, I get a warning that says "Driver Support does not work. Then he said: "windows is looking for a solution."  Then the two opinions to go and my homepage appears as usual. But as I use the computer, I find that it freezes while downloading. And it will take several periods of time before the download starts. Sometimes I have to restart.

  You have a problem with your hard drive.

  For a Dell computer, please visit this link:
  http://www.Dell.com/support/article/us/en/19/SLN115162/en

• Coupling, apply for all graphics remove

  Hello

  My current project is a directory of photos for my church. I use the data merge feature to fill out a worksheet entries and was very impressed with it so far. What I need now is a script that will allow me to set the installation for each graphic block in my paper on "Connection"-> "to adapt to the content of the framework.

  The reason for this is because I want to apply a line on all images, but because the images are of different proportions I find myself with a proportionally resized image to the frame with a few empty spaces inside the frame; for an image of type 6 x 4, I find myself with a white bar under the image, and for a 4 x 6 I find myself with two white bars on each side. If I apply this mounting option before the merger, it puts the frame 0 in x 0 in because there is no image on the inside; I can't select all after the merger, because that selects only all on one page, and I have to do this on 28 pages.

  Can I apply a drop shadow to the frame before the merger, or even any other effect, and it applies to the image. I just can't apply a stroke because there is no effect for that, as it is in Illustrator or Photoshop.

  Any help is very appreciated!

  Ben.

  I found a script that has affected all the graphics, and I have amended accordingly.

  for (var i = 0; i)

  app.activeDocument.allGraphics.fit (FitOptions.FRAME_TO_CONTENT);

• Applied skin lost for all subjects

  Hi all
  
  I was playing around with default skin of my project and after that I saved I saw a message appears at the bottom of the screen that says «Applying skin...» ». He's been through and all my topics updated with the new settings. Then, I tried to undo changes back again because I did not like the result, but it does not re - apply changes again after that I saved. I tried to restart RH, reloading of the subjects and the only way, it seems that I can solve it is to go into the properties of the section, remove the skin and reapply. It's a lot of your time in a project as big!
  
  I was wondering if anyone knows a way to manually request RH7 to apply a skin for all / several subjects at the same time?
  
  Kind regards
  darkagn

  If you go to the tab headings (right side in RH6) then you can select several subjects using the normal windows Ctrl Shift options. Right click and select Properties, on the general tab you can also select a model that will apply to all items.
  HTH

• Safari displays "the network connection has been lost" for all files flv on the internet.  Firefox reads all

  I've upgraded to the latest version of Flash to correct what I thought was a problem in Firefox.  This problem turned out to be something else but now Safari will not play ANY flash content.  I uninstalled and reinstalled several times.  I even installed an earlier version.  All the these have exactly the same result.  Flash works in Firefox, but not in Safari.  I cleared the cache.  I entered the settings of flash securty and remove all the content.  Nothing seems to change this.  Anyone have any ideas?

  Never mind.  Stupid stupid stupid.  There was a firewall rule blocks flash.  I don't know why it worked in Firefox but when I unchecked, fixed it.

• Scanner does not work for all users on the computer Windows 7

  Photosmart 7510 Scanner does not work.  My scanner has the habit of work.   Now it does not for one of the three users on my Windows 7 desktop.

  I spent over 3 hours on the phone with HP.   They had me restart the computer, Plug and unplug the printer, reinstall the software twice under different names. The software depending on what user id, it is installed under allows access to the scanner/printer to one or more users.  The scanner works with Windows Paint software for all three nicknames.

  HP response is that some user control prevents the scanner software, who used to work on all three nicknames on the computer, which now works on one or more of the users.  They couldn't tell me which user control need changing.

  The HP solution is to restore my system when I could scan for all users of three.   I don't want to do that.   Does anyone have a better solution?

  The real problem is HP error messages.   When I click on scan a document, there is no answer.  Nothing happened.

  Then I tried to scan using Windows Fax and Scan.   I got an error message which helped me locate the source of the error.   I was able to fix the problem without creating a new user account.  I had deleted bu error the file MY Document.   Restore this file fixes the problem.

• Cannot download 10 windows XP and IE 8 security updates. for all error messages are either: 0x800700D and 0 x 8007002.

  Cannot download 10 windows XP and IE 8 security updates from microsoft windows update site. for all error messages are 0x800700D or 0 x 8007002.  Please help thanks.

  Thank you.

  Hi Pauli,

  See following documents to troubleshoot Windows Update error 0 x 8007002 & 0x800700D (scroll down to section fix it myself ).

• Windows 7 drivers for HP ENVY Sleekbook 6-1126sa

  Hello

  I have a HP ENVY Sleekbook 6-1126sa.  I need to have Windows 7 (not Windows 8). I installed Windows 7 (no UEFI). It's pretty simple. Now I find there is no Windows 7 drivers on the HP support site. HP support site advises to use Windows updates to update drivers or visit the manufacturer's Web site. Problem is I need an Internet connection to run Windows Update but cannot find the Ralink Wireless drivers. Looking for Ralink manufacturers website I find http://www.ralinktech.com/en/ (which States that the Ralink site merged with the Web of MediaTek site and one for pilots redirects to http://www.mediatek.com/_en/07_downloads/01_windows.php). Maybe somebody has an idea which driver I'm supposed to use? Updates of Windows actually work?

  Does anyone know if HP intend to provide Windows 7 for HP ENVY Sleekbook 6-1126sa laptop drivers (and indeed any other portable newly acquired)?

  Kind regards

  Keith

  Hello

  With perseverance and a bit of research I managed finally to find the remaining Windows 7 drivers (for all unknown devices).

  For anyone who needs to install Windows 7 on a HP ENVY Sleekbook 6-1126sa, follow is where I found the remaining device drivers:

  1.) Bluetooth controller:

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?lang=en & CC = US & sp4ts. OID = 5229457 & swItem = ob_110019_1

  Ethernet controller 2) :

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 13 & PFid = 5 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  3 + 4) Both Bus SM & USB 3 controller:

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7

  A device of 5th (simply listed as PCI device) had become available after they have been installed. That ends up being:

  5 Realtek card reader.) :

  http://www.Realtek.cz/Realtek-download.php?Realtek=RTS5286 & System = 1

  Hope this helps someone.

  See you soon,.

  Keith

• Hi, windows 7 Disk Defragmenter problems daily schedule set for all discs, never happens, it sometimes takes weeks

  Hi, windows 7 Disk Defragmenter problems daily schedule set for all discs, never happens, it sometimes takes weeks. Have a disk busy on the farm that is used for the storage of video surveillance. When I realize the performance issues, I check and find tht 'daily' Setup for MS disk defragmentation is not in fact run every day. I am watching silent movies and waiting for a 500 GB drive to effectively defragment, pass it is on average 1 percent per minute (with any other IO goes on the disc and app collection closed).

  There must be (I hope) a flag I can put to Disk Defragmenter to be more aggressive in its analysis.

  It is Windows 7 64 bit running on AMD processors, disks are sATA plugged in, although there is also a matrix RAID PCI Promise, it's usually when I started Hello I/O on the Board of 2 TB or utilization of the 'C', I realize the lack of defragmentation. I recall, before the SP1 under WIN 7, he ran on a daily basis, in fact, rather than an API algorith "guess".

  System is in place 24 x 7 (I turn off the monitor at the time of sunset), there is no "powersaver" feature used on this particular device. I edited my original question because after many years of support, I realized, by asking the initial question, that I was not providing information that I would be asked a customer, if I was still doing this job.

  Kind regards

  Lorin Boyack

  Hello Lorin,

  There are several reasons why the built-in Defragmenter may not work correctly:

  Method 1: He is also a malware on the system. Solution: Run an anti-virus control and also a spyware check.

  I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Method 2: The disk is too full (you need at least 15% free space, sometimes 20%). Solution: Delete files unnecessary and programs until you have more than 20% free space.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Method 3: The disc is damaged and must be repaired. Solution:

  a. open "Computer" and right-click on the drive that you want to disable frag.

  b. Select 'Properties' and click on 'tools '.

  c. Select "Check now" to check the drive for errors.

  d. Select the two options and click on 'start '.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-your-hard-disk-for-errors

   

  Important: While running chkdsk (check disk) hard disk, if bad sectors are found on the hard drive when chkdsk attempts to repair this sector, the data available in this area may be lost, and it is not recoverable.

  (This can take time and can restart the PC so that it can do the check at boot time. Be patient and let it complete).

  Method 4: Disk Defragmenter may be corrupted, requiring a system restore to fix.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

   

  NOTE: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Method 5: There are other programs that are running this interruption, the built-in Defragmenter. Solution:

  a. close all running programs.

  b. If you think there may be some programs that run in the background.

  c. press Ctrl + Alt + Delete and

  d. Select "start Task Manager".

  e. under the 'Applications' tab, you will find a list of all running applications - you can close these by selecting "end task."

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Windows 7 Graphics problem: graphics would become all deformed and weird looking

  original title: graphic problem Windows 7

  Hi, I recently got a new laptop with Windows 7 pre-installed on it.  Sorry if this problem has already been asked before, but I couldn't find someone else with the same problem I have.

  Sometimes, the graphics would become all deformed and weird looking.  Look at the screenshot I took:

  

  And it occurs for each program, not only on the desktop.  I could usually get rid of the lines by reducing the window and maximizing it again.  But it's so boring.

  My graphics card is a Mobile Intel (r) 4 Series Express Chipset Family.  I updated the driver from last night, but the same thing happens again.  So I don't know what else could be the problem.

  Thanks in advance!

  Check if your video card has its own program/parameters adjustment control panel and use it to adjust your settings more towards the side of the 'quality' rather than the side 'Performance' and see if that smooth your edges for you.  Also, you said that your system is new.  You can look into having served through your warranty.  You also need to make sure that it is not getting too hot.  Laptops produce a lot of heat and if it doesn't get good ventalation / or enough, then he can begin to display this type of behavior.  I had to go out and get a 'cooling block' for mine to keep it cool.  I hadn't started to have problems because of the heat, but I decided on my own that he was too hot.   Hope this bit of info helps.

• Windows 8 games graphics problems with Ideapad Z575. Do not play games. :'(

  After you have installed Windows 8 and install all the drivers that I got from the site Web: Lenovo's laptop can no longer play any games. I have more option open of AMD Vision options or options "Switchable Graphics" as they do not appear in the menu when I right click on the desktop. I've updated the driver graphic via Lenovo website, but still cannot access any game. When I try to start a game, the game will display a white color screen with slight graphical artifacts. When I tried to start one of my games, "Killing Floor" it actually caused my cell phone restart.

  Anyone have similar problems with their Windows 8 pc or have a solution?

  Well, I finally found the problem. I discovered that the graphics driver that I had on the Lenovo site have actually NOT installed us. When I ran the Catalyst Install Manager, the Manager showed global progress bar, but it did not install anything. That was pretty weird.

  When I ran the driver Catalyst install listed in the Chinese link that was given to me in this thread.

  http://forums.Lenovo.com/T5/IdeaPad-Y-U-V-Z-and-P-series/is-it-safe-to-download-and-install-AMD-DRIV...

  It actually installed and now everything seems to work. I asked of Vision engine again, I can use switchable graphics and I just tested with Dark Souls prepare to Die Edition without any problem. The game is actually more smooth.

  Thanks again for the help.

• Windows driver 8 - switchable graphics problem

  Hello

  I installed Windows 8 RTM Enterprise (trial) on my laptop HP G62 B13SL . It has an ATI Mobility Radeon HD 5470 and an Intel's HD Graphics (Core i3, first generation).

  I installed the driver ATI Catalyst 12.8 (with Win8 compatibility). During the installation of 'ATI video driver', the screen went black (no light).

  So, I put the laptop to sleep and then I awake, and the screen worked again.

  I also installed the official Intel HD graphics driver from the HP website (ver. ( 8.15.10.2189), because the Intel.com driver gives an error when I run the installation program.

  Please help me!

  Notes/Info:

  1. If I open the Catalyst Control Center , I get an error of the AMD driver.
  2. In 'Device Manager', there are two generic screens instead of one.
  3. There is no option to change the map.

  -giofrida

  Hello

  For your switchable graphics work correctly, the ATI and Intel drivers must be installed using the package AMD - install the drivers individually will not work.  The simplest option is to wait for HP to publish an updated for Windows 8 AMD software package.

  There is a work around you can use (also popular with people running Windows 7, who wanted to just past combinations switchable graphics driver for graphic models) - see link below.  If you want to try this, make sure to save all your data first just in case where.  This method is not supported by HP, so if you want to try it, it will be at your own risk.

  http://leshcatlabs.NET/index.php/2012/08/catalyst-12-8-WHQL-unifl-for-atiintel-graphics/

  Before trying this, I suggest strongly that read you the Manual to get an idea of how it works.

  The main points to be aware of this method are:

  * Driver signature enforcement will be disabled to allow unsigned drivers to load.

  * You pouvez obtain a "Test Mode" watermark in the bottom right of your desktop.

  If your happy with it (I have personally run Windows 8 with these drivers without problem), at least he can bridge the gap until HP version updated drivers.

  Kind regards

  DP - K

• Graphics problems during the game Age of Empire II in mode full screen in Windows 7

  Original title: screen resolution and/or graphics problem with Windows 7.

  Hi, I had currently two computers in my house upgraded to windows 7, one a Vista XP.

  I am trying to run Age Of Empires 2 on both computers, the game has installed and running with ease, however it won't let you play the game in full screen, and also the color of things like grass and trees appear in red and orange, water displays brilliant purple.

  I tried to change the windows screen resolution and the resolution of the options in the game, but it only changes in the percentage of the screen resolution, that he chooses to play in.

  I can solve this? All advice is appreciated and thanks in advance.

  PS I tried to reinstall and update graphic drivers, both computers have the same problem of new clean installations of windows and Age of Empires 2.

  Thank you

  It is a problem due to the fact that AOE 2 was built on the platform Windows 95/98 Win9x. It will expose a few graphical artifacts while playing. You can try setting compatibility Win98 or Win95 check. There is also a workaround that may work in my opinion. You will need to search for "how to run StarCraft (1) on Windows 7" in Bing (Alternatively, Google: P) and it would show a site with a .bat file that could solve the problem of graphics in fullscreen.

  I hope this helps.

  What I did with StarCraft was this:

  On the desktop, right-click and select new text Document. Inside the Document, type this

  Taskkill /f /IM explorer.exe
  D:\"StarCraft"\"StarCraft.exe".
  Start explorer.exe

  Just replace the location of StarCraft with the location of the AOE II.

  Save the file as: 'AOEII.bat' and then set the file type to the text file to all files.

  What happens is that if corrects the discoloration and restart the explorer again after the end of the game. Although there is no easy way to change the icon of the good bat file: P

• Pavilion p6110t CTO Desktop: drivers for Windows Server 2008 and HARD drive problems

  Recently, I had the hard drive with my OS failure. After replacing the hard drive and reinstall windows server 2008, I seem to have encountered some problems with drivers.  After insalling Windows, I had 3 items in my device manager that not have installed correctly. I could get the driver for the LAN port to work, but I did not get the driver to "Standard VGA Graphics Adapter" and "SM Bus controller". After a little research, I believe that the graphics card is a Radeon HD4350. With this information, I still have been unable to toinstlal the correct drivers or the other of these elements. I tried several drivers listed on the support page of the drivers on the HP website, but all fo return them the same error of not finding the right operating system. The link to the driver, I used initially on my previous installation seems is no longer valid.

  Also, I can't access two additoinal hard disks (sata connected). They were used with the previous installation of windows without any problem. They appear in the Device Manager but do not show in my computer. A removable disk appears that I don't know what it is. Previously I used the software to mirror one of the disks on the other in order to avoid the loss of data if a disk fails. Is one of the above players with not be able to access the drives causing the problem or the software used before the problem?

  Any help on these questions is greatly appreciated.

  Ok.

  I can't help you with the readers then.  It is out of my area of knowledge.  If they are healthy and active in the disk management utility, then that's all that I know these should be reported.

  As for the graphics drivers...

  Download and install this free utility for files.

  http://www.7-zip.org/

  After installing 7 - zip, right-click on the graphic driver file and select 7 - zip from the list of options.

  Choose 7-zip to extract to: and leave it to unzip the file in a folder.  I have it extracted the file name of the file.

  Then just follow the rest of my instructions to install the driver.

  Of course that you you first go to where 7 - zip extract the folder and continue from there.

• HP/Compaq nc6400 laptop: HP/compaq nc6400 Windows 10 and graphic problem, erasing text in areas of immersive shell.

  I have a laptop nc 6400 product number: RB518UT #ABA uses an ATI mobility Radeon x 1300 graphics card, as well as Intel (r) mobile express chipset available 965 G. I chose to use Classic desktop windows at the moment and no problem at all now. I don't know about Vsync or 2D with any partbut I disabled it Aero, windows 'themes' clear the text, mosaic with not a spec left shaows WHEREAS I could think of and still the text clears using my own slider like gum or disappears and leavesablank. Alsooccasionaly gibberish are more black lines not only any official language, but today I thought that almost a nonsense post script type to some... in some mobile tiles that can refresh, but even that does not work as it always has... I am at a loss I need a decent graphics that I use photoshop and dreamweaver allt/times a day and at least they need to exploit as much as possible. I had no problem with their execution on this computer for the past 4 years or more. It has been now 4 OS on this big machine that has not had any problems over the past 7 years. He 4gig memory and 750 GB hard drive and lack of wellis touchscreen but... not worry Windows when they checked all this to check.  I am beyond my capabilities and need help. Even if I need to build my own divers I Although it will not be the fastest answer, but I can see the need to know how the alter pilots an asset right about now.  Please you all the

  suggestions will be an asset, as I am a "what to do now the level of frustration"and would like that much more about the reason for it. " I was just as lucky as my machine has never had issues that were close to that sort of thing.

  TY for any help, answers, all possible assistance, you may think.  I hope that I have provided a clear problem, and most of the information you need. I never used a service like other instances, that raising any issues that others have as well.  Always helping if I wasn't sure but never as difficult a question as is happening now.

  Ty for any possible assistance or suggestions that can point me in the right direction.

  egcorrell

  Hello:

  The only suggestion I can offer would be manually install the graphics driver Vista support for your laptop and driver, page and see if it works...

  BTW, the nc6400 has the mobile Intel 945 chipset, not the 965.  The 6910p has the 965 chipset.

  Download and run this driver... You will probably get an error of unsupported operating system.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=1847705&swItemId=ob_59975_1&swEnvOid=2103#tab1

  Conclusion of any windows error.

  Go to Device Manager and click on the video controller (or Microsoft based Display Adapter) who need drivers.

  Click the driver tab.

  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp38833.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart.

  If your nc6400 has this problem with the SMSC Infrared driver with the! Marc, I went into the BIOS, found the menu of Ports and disabled the infrared port, saved and restarted.

  That got rid of the problem of device.

  I don't know of anyone who uses the infrared port anyway.