Similar Questions

• I connected my hp desktop for samsung tv, but when I try to start windows it shows loading then windows past mode not supported unless I have load in safe mode. How can I fix it?

  How to load windows normally?

  See the following topics:

  Connect your computer to a TV - Windows help

  also:

  How can I connect my Windows PC to a TV? - Topic

• Windows xp mode will not activate

  im running on Vpc and when I type in the key, he said his unauthorized

  Hello

  Windows XP mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode is supported through Technet
  
  TechNet - Forums - Windows 7 virtualization
  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Can I use folder Windows xp mode for the office and home computer?

  I installed windows xp mode in my office machine n it works perfectly, I can use the same windows xp mode file n use in my machine at home.

  Both the machine home & office machine that I use is windows 7 pro.

  Hello

  To add some excellent advice from Andre:

  (XP mode requires professional, Ultimate or Enterprise).

  Get all the benefits of Windows 7 and continue to take advantage of your investments
  in the old business and productivity programs that require a Windows PC
  WPA Note: Windows XP Mode requires a download.
  http://www.Microsoft.com/Windows/Windows-7/features/Windows-XP-mode.aspx

  Windows XP mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode is supported through Technet

  TechNet - Forums - Windows 7 virtualization
  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  Hi Izzy Nagar,

  ·         Exactly when you receive this error message?

  ·         Did you do changes on the computer before the show?

  ·         Do you have any extended monitor connected to the computer in the past or at the present time?

  Follow the suggestions below for a possible solution:

  Method 1: You can try to reduce the resolution of the screen (lower), then check if the message still appears.

  Check also if the refresh rate of the monitor is set correctly and check the manual of the monitor for assistance.

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-display-quality

   

  Flicker of the correct monitor (refresh rate)

  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

  Method 2: Use the option ' enable video low resolution (640 × 480) "start, then update your video card driver and check if the problem still persists.

  a. click the Start button, click the arrow next to Shut Down and then click on restart.

  b. do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. on the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.

  d. connect to your computer with an account of a user who has administrator rights.

  e. If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see the article:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• Windows XP mode alert message...

  I'm using an Acer laptop, windows 7 barely one year old; just upgaraded for windows 7 Professional; downloaded and installed windows xp mode and virtual pc mode... I have a lot of games for windows xp; followed all instructions step by step on installing xp games, only install one so far, installation says 'successful' but came into xp mode to play the game and an alert box came up saying "could not create the display device. DirectX is not available {1002}' I clicked on Yes during the installation of the game and even went and downloaded from the web site itself, but I get the same megs.

  Here are my system specs.   Acer Aspire 7736Z, 64-bit, Pentium (r) dual-core, 2.20 GHz, 3.00 GB...

  Can someone help me and tell me what is happening here and how to fix it?   Of course, I'd be happy of it... miss my games... :-) Thanks in advance.

  Windows XP mode (Virtual PC) is not designed for players. "Windows XP Mode is best suited for older applications business such as accounting, inventory and similar applications. Windows XP Mode is not intended for consumers because much of consumer applications requires a use extensive physical interfaces, such as 3D graphics, audio and TV tuners, which don't work well under virtualization today. "(http://www.microsoft.com/windows/virtual-pc/support/faq.aspx)

  You should play games XP in your environment from Windows 7, if necessary, install and play with these two compatibility settings (right click on Configuration and resp. game.exe > properties): 'For Windows XP SP3 Compatibility Mode' and 'run as administrator '. Some games need special corrections or methods to make them run, though, as too much has changed since their original release. Other games work without all these questions.

  "192GO should be enough for everyone." (of the miniseries "Next generation jokes")

• my XP MESSAGE Mode not supported which shows what that means?

  I have a computer that is restored to nine and use it only for the games... this week I have only this to the screen: MESSAGE

  MODE NOT

  support

  Hello

  Looks like something to configure your PC to try to use a resolution not supported by your monitor. If this is the case it should help you working again.

  First of all, start in safe mode - keep hitting F8 twice a second after turning on the PC until you get the start menu where safe mode is selectable by the up/down arrow keys, and then press ENTER.

  In safe mode, log under an administrator account, then...

  • Click Start
  • Click on run
  • Type devmgmt.msc and press enter
  • Expand the section Dsipaly cards (click on +)
  • Right click list adapters all in turn, then click on uninstall
  • Restart your PC

  During the restart of your PC you should get is no longer 'mode not supported '. Your graphics card must be redetected and drivers installed automatically. If you receive warnings about having not tested properly for Windows device driver, ignore the warning and accept the driver for installation. The items displayed on the screen may appear too large, if that's the case...

  • Right-click and empty part of your desktop and then click Properties
  • Click on the settings tab
  • Move the resolution slider all the way to the right
  • Click OK

  Tricky

• Display driver hangs on the computer and the error message "display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."

  Original title: NVIDIA Windows Kernel Mode Driver Version 306.97 display driver has stopped working and recovered.

  Hiya,

  I have recently installed Windows 8 Pro, installed all of my usual applications etc..
  The problem I've encountered is maintaining display driver crashing. Or have waiting periods. The exact error message reads;
  "Display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."
  Until now it expires randomly even when the computer is idle, and more frequently when I watch videos online. Also, watch a clip full screen on some sites like YouTube is ok, but on others, it is very laggy (updated maybe once per second the image) and the sound is out of sync.
  I can't find a way to properly uninstall the graphics driver.

  At least yours is working semi... I have the GTS 450 (uses the same drivers) and the mine does not at all... Stuck with the regular game pilot integrated ATM and can not all games... Microsoft told me to wait a few weeks and for the reminder and Nvida said 10 ways to uninstall and reinstall the drivers for same. Hope someone with to get a fix for this soon.

  Hi guys,.
  Looks like this isn't just me.
  Just an update, that I can not confirm it as a solution, but I have not encountered any problem (a little screenlag aside) since the installation of the drivers beta. For me, the beta version of the driver is 310.33, R130. The only other change to my system updates Adobe Flash version packaged with Google Chrome to 11.4.31X to 11.4.402 to eliminate serious problems when you watch the video in full screen.
  Information system;
  Operating system: Windows 8 Build Pro with Media Center 64-bit, 9200
  CPU: AMD FX-8150 eight physical cores
  GPU: ASUS NVIDIA GeForce GTX 560 TI
  Main hard drive: OCZ Vertex 3 120 GB
  It may be useful
  Edit: Still not falling down, 11/02/12, 4 days
  
  
  New edition;
  
  
  If you still receive the error message, try the following steps;
  Has. try to perform a clean installation of the driver.
  Download the latest drivers for your graphics card. Run the downloaded file, and select "Custom Installation". In the next screen, you will see a checkbox or similar labeled "Clean Install".
       
  
  You can do so by visiting nVidia Driver Downloads (www.nvidia.com/Drivers). Automatically detect the right driver or download using the form. The best way in my opinion is to use the GeForce experience, who will do anything for you in two clicks and a reboot.
  B. close all other programs
  It is possible that the error was caused by too many programs that need to use the resources provided by the graphics card/chip. It is also possible that a certain program caused a conflict that pilots crashed.
  You can try closing some currently open programs one by one and see if the error persists, or restart your system with disabled startup programs and allow them one by one to find the culprit. If the error is too persistent to do the above, it would be easier to start in safe mode option.
  More information can be found below
  http://support.Microsoft.com/kb/2665946/en-us

• CS6 Production Premium supports AMD graphics cards? Specifically over-pants M6100. If so, all the features work with the M6100, or are there features that work only with nVidia video cards?

  CS6 Production Premium supports AMD graphics cards? Specifically over-pants M6100. If so, all the features work with the M6100, or are there features that work only with nVidia video cards?

  CS6 does support OpenCL and OpenGL?

  Are all features that CS6 supports for NVidia Cuda available for the M6100 OpenCL?

  Bill supposed to first Pro CC (not CS6) response. Windows of Premiere Pro CS6 version does not support OpenCL for accelerating GPU of MPE. Therefore, there is no "opencl_supported_cards.txt" file in the folder of Premiere Pro, and the code to OpenCL is disabled permanently in all versions of Windows from Premiere Pro CS6. So, for your over-pants M6100 Premiere Pro CS6 will be permanently locked to only software MPE mode. (Acceleration GPU of MSES in the Windows of Premiere Pro CS6 version is limited to the CUDA only, which means that only NVIDIA for GPU - no AMD over-pants or GPU Radeon support CUDA at all.)

• Qosmio X 500 and question NVIDIA Windows Kernel Mode Driver.

  Hello

  For some time my X 500 will 'freeze' then gives me a black screen before returning to "normal" with an error display window in the taskbar. The read error ".

  "* Display driver stopped responding and has recovered."
  "+ Display driver NVIDIA Windows Kernel Mode Driver, Version 259.12 stopped responding and has successfully recovered.

  Have run a diagnostic on the laptop and tried the NVIDIA drivers updated etc, but it continues to happen.

  Any ideas on the causes AND more to the point HOW to solve this problem?

  I post a screenshot of the error message but cannot find how this is done - if it is allowed?

  See you soon

  Frank

  Hello

  I guess that this is caused by the graphics chip, it is possible that caused graphics card driver problems related to bad entries in the registry or in the worst case the graphics chip could badly run.

  Also found this thread where the user that edbelgium seems solved problems with graph on X 500.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=64607

• Windows XP mode / Windows virtual PC

  I have to support some programs LV7.1 (and newer versions).  I just bought a new laptop with Windows 7 64-bit edition.  LV7.1 loads and runs, but the drivers disk pours on the 64-bit operating system.  (This was not unexpected...)

  The new PC he has an Intel processor supporting Windows Virtual PC and Windows XP mode.

  I need to upgrade to W7 Pro, but before I do, I want to get some feelings that it will work.  If older NIDaq, MAX, etc. Install OK in XP mode?  If someone has done this?  Is there another solution which is better?

  Hi John,.

  NOR-traditional DAQ won't work on Windows 7 64-bit at all, even if you install the (very limited) driver beta OR - traditional DAQ 7.5.   I do not work with LabVIEW license much (data acquisition is my spring) but I understand that you can have different versions on different computers.  If this is the case, you must use OR-DAQmx 9.0.2 with LabVIEWs 8.2.1 and 8.5.1 8.6.1.  NOR-DAQmx 9.0.2 is the first version 'officially' supported on Windows 7, both 32 - and 64-bit.  As long as you use a 32-bit version of LabVIEW (which, if you're not using LabVIEW 2009, it will be inherently 32-bit) you binaries will work fine.

  Note: When I say "as long as you use a 32-bit version of LabVIEW' I do not mean a version that does not work on a 64 bit OS.  This section of the knowledge base, LabVIEW 64-bit vs 32-Bit Applications FAQ, explained part of the difference.  The main thing to keep in mind is that because Windows Vista and Windows 7 can emulate 32-bit programs to 64-bit well enough, you can still use a version of LabVIEW which is only 32-bit on a 64-bit computer.

  I don't know the number of tests we did install older versions of LabVIEW as 8.2.1 on Windows 7, but I guess it should work fine.  I would recommend this install it:

  1. LabVIEW 8.2.1
  2. LabVIEW 8.5.1
  3. LabVIEW 8.6.1
  4. Boxes to tools or modules of the foregoing
  5. NOR-DAQmx 9.0.2

  I hope this helps!

• Dragon Naturally Speaking has stopped working, how to turn off Windows compatibility mode?

  How can I turn off Windows compatibility mode

  I use Dragon Naturally Speaking (DNS) and all of a sudden it will not open. The info, after trying MANY proposed options, says "turn off Windows compatibility mode.

  Hello

  1. don't you make changes before the show?

  Try the following steps to disable the compatibility mode.
  a. Locate the launch of Dragon NaturallySpeaking file, right-click on it and click Properties.
  b. click on the Compatibility tab.
  c. in compatibility mode, uncheck the box "run this program in compatibility mode for".
  d. click ok to apply the changes.
  e. check if the problem persists.

  If the problem persists, then contact the program vendor support team:see Dragon NaturallySpeaking support

• How can I change the video display Mode when the monitor mode not supported?

  While creating my new monitor, I changed the computer video display mode at 120 Hz by accident.  Now I see something on the monitor other than the words not taken in CHARGE the MODE.

  My system is a new HP Pavilion p7-1423W running Windows 8.1 with Intel i5-2320 3 ghz

  I tried the start mode by pressing ESC on power but do not help the startup options.  And the just F11 menu option makes the startup screen disapear and puts the monitor mode not supported.  Tapping F8 doen't work and tapping F12 just puts me in the bios menus that do not help.

  How can I upgrade the video card integrated with a video mode that is supported when I can't see the screen?

  I answer my own question because I found my solution, thanks to my grandson (freshman to Renselear Politech).

  I shoot to buy a monitor that displays a refresh rate of 120, so I could put my rear view.

  Here is the solution.

  My computer double exit DVI.  My grandson told me to connect my new monitor to the other output because the output does not get touched when I changed the original mode of production.  He has worked and is automatically selects the default monitors mode.  Then I've reconfigured the original output using the integrated display software. Solved!

• Windows xp mode

  I'm curious to know if windows xp mode can play old video games.  That would be really helpful because I have a couple that is fun, but I don't know if they will work.

  Hello

  If the game you are trying to read is compatible with XP, then you can install it on XP Mode without any problem. They work without hassle.

  Windows XP Mode

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem of Windows 7 mode and Virtual PC XP

  A few months ago, I bought a laptop. It was the vista operating system. I was told I could easily upgrade to Windows 7 Professional and activate the XP mode, so that I can run some of my business software that can only run in XP mode. They gave me a free upgrade to Windows 7 Home premium with the purchase of my new laptop computer.

  Yesterday, my upgrade from Windows 7 Home premium arrived. I installed and then bought the online upgrade to Windows 7 Professional. After professional installation, I tried to activate Windows XP mode and I discovered that my Intel Core 2 Duo microprocessor does not support virtualization technology to run windows XP mode 7.

  The place I bought the laptop has agreed to take my laptop and give me a refund. My question is how can I make sure that I don't have to pay for him any time upgrade to the professional version when I get my new computer with the right type of microprocessor?

  Being understood that the question and your post has nothing to with Windows Update features (compared to the upgrade of Windows), see Windows XP Mode requirements article here: http://windows.microsoft.com/en-us/windows7/install-and-use-windows-xp-mode-in-windows-7

  If return you the computer to Vista & then go to Win7 Home Premium, you should be able to use the Win7 Pro Upgrade Anytime to another eligible computer.

  More questions about the upgrade to Win7? Post them here: http://social.answers.microsoft.com/Forums/en-US/w7install/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft