Windows XP - NICs has error code 10 - impossible to start this device.

I tried to install McAfee 2011 on my pc and now I can't access the internet. I am running XP. Explore the msg on the internet says no card no installed wireless network. I checked the properties of the network connection and found one of the adapters network error code 10 - impossible to start this device. Since I have more access to internet to download the drivers, etc., how can I fix this problem?

Hello

I suggest you to download the latest network adapter driver by using another computer and transfer to the computer that is causing this problem and install the same.

For more information about the error 10 code refer article.
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104

Tags: Windows

Similar Questions

  • Try opening Windows Defender me gives error code: 0x800106ba - a problem caused this program service stop. Help, please.

    Hi all

    I am a newbie with doozy a bit of a problem:

    Services of Windows Defender on my local computer no longer works.  The message I get is:

    «Windows Defender encountered an error: 0x800106ba.» A problem caused this program service stop.  To start the service, restart your computer or search help and Support to find out how to start a service manually. »

    I restarted my computer nothing works.

    I followed the advice from another thread in the following way: go to the control panel > click on Administrative Tools > Services > Windows Defender properties > change initially > press on apply.  It seemed that he would work until the following message appeared:

    "The Windows Defender service on Local computer started and then stopped.  Some services stop automatically if they are not in use by other services or programs. »

    Any help, help, clarity on this issue...?

    Thank you very much! :]

    This problem can occur because another security application is used or the Windows Defender service has stopped, or components of Windows Defender are corrupt.

    You install any new programs recently? Windows Defender is not designed to protect against the extent of malware. If programs like Microsoft Security Essentials or AVG 9 and Windows Defender both run, your system may experience degradation in performance and other problems caused by the conflict of two services providing real-time protection at the same time. I recommend that you keep the Defender off if another application of security protection is running. These security software stop windows Defender work properly in order to prevent conflicts.

    If no similar security application is installed, I suggest that we have follow these steps to resolve the problem:

    Step 1: Check the Windows Defender service
    =================================
    1. click on start, in the search box, type: "services.msc" (without the quotes) and press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    2. double-click on the service "Windows Defender".
    3. click on the 'general' tab. Make sure the "Startup Type" is "automatic". Click on apply. Then please click on "Start" under "Status of Service" to start the service.

    If the problem is not resolved, please refer to step 2:

    Step 2: Save the associated DLL files
    ========================
    1. click on start, type "cmd" (without the quotes) in the box start the search. Right click on CMD listed above and click 'run as administrator '.

    2. in the command prompt, type the following and press ENTER to each order:

    regsvr32 atl.dll

    regsvr32 c:\windows\system32\wuapi.dll
    regsvr32 softpub.dll
    regsvr32 mssip32.dll

    3. close the command prompt, and then run Windows Defender.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • installed a device and get an error message "(code 10) Impossible to start the device"

    Installed Pinnacle Studio 12

    Hi Bernard,.

    Please provide the exact model of your device number.

    12 code: This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system.

    This error can occur if two devices that are installed on your computer received the same (Input\output) of i/o ports, the same interrupt, or the same Direct memory access channel (whether through BIOS (Basic Input Output System), the operating system, or both). This error message can also appear if the BIOS did not allocate enough resources for the device.

    Method 1: Run the fixit available in the link below and then check if it makes a difference

    Hardware devices do not work or are not detected in Windows http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Reference

    Explanation of error codes generated by Device Manager
    http://support.Microsoft.com/kb/310123

    http://TechNet.Microsoft.com/en-us/library/cc732199 (WS.10) .aspx

  • Error code 28: the drivers for this device are not installed for Ethernet controller

    Original title: I received an error message for, controller ethernet, the drivers for this device are not installed. (Code 28)

    I don't know how to install the drivers for ethernet controller, and I don't think that I have a CD for it. And I don't know where to go.

    Hi jhawkerchic,

    1. What is the number of brand and model of your computer?

    To resolve this problem, you must install the latest version of the drivers for the device.

    You can check the manufacturer's website and download and install the latest version of the drivers available for the device.

    You can see the following article for more information about the error Code 28:

    Explanation of error codes generated by Device Manager in Windows XP Professional

    http://support.Microsoft.com/kb/310123

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Error code 28 'the drivers for this device are not installed' for Seagate ST905004EXA101 - RK 500 GB hard drive.

    Original title: Windows7 does not recognise seagate expansion drive.

    Expansion drive model: ST905004EXA101 - RK Seagate 500 GB

    Microsoft Windows 7 website says that it is supported.

    The drive works in another laptop with Windows XP.

    Try installing in another laptop with Windows 7 Enterprise SP1.

    In Device Manager, I get a message "the drivers for this device are not installed. (Code 28) »

    Hi PinakiDeb,

    You can follow this link & check if the problem persists.

    http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201235&NewLang=en.------

    Hope the helps of information.
    Please post back and we do know.

  • Updates Windows installs, has error code 66 & 80070643

    Error code 66 & 80070643 appear when you try to install upgrades to windows 7. Happened since then went from broadband to the Wi - Fi

    * original title - computer will not install the updates of windows. Gives the error code 66A & 80070643. Previously no problem on broadband but since I use wireless connections problem is constant. No windows at all.* payments

    You can see this discussion earlier, linked: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/f1dd866f-85b7-4ae6-bc32-1c488c19742a ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • SCardUIDlgSelectCardW returned unexpected error code, 0x8010002e, impossible to find a card reader chip.

    Event ID error msg:

    Log name: Application
    Source: Microsoft smart card CSP
    Date: 2010-06-29 22:25:22
    Event ID: 0
    Task category: no
    Level: error
    Keywords: Classic
    User: n/a
    Computer: Acer
    Description:
    The description for event ID 0 in source Microsoft smart card CSP is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

    If the event is on another computer, the display information had to be saved with the event.

    The following information has been included in the event:

    SCardUIDlgSelectCardW returned unexpected error code, 0x8010002e, impossible to find a card reader chip.

    the message resource is present, but the message is not in the string/message table

    Title: event ID of origin 0

    The event XML:
    http://schemas.Microsoft.com/win/2004/08/events/event">
     
       
        0
        2
        0
        0 x 80000000000000
       
        68716
        Application
        Acer
       
     

     
        SCardUIDlgSelectCardW returned unexpected error code, 0x8010002e, impossible to find a card reader chip.

     

    Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Windows Vista Security Forum

    Lisa
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Unable to get the windows updates. Get error code 80072EFE. Help!

    Unable to get the windows updates. Get error code 80072EFE.  Help!

    Gary,

    ERROR_INTERNET_CONNECTION_ABORTED 80072EFE

    You may experience temporary errors related to connection when you use windows update or microsoft update to install updates http://support.microsoft.com/kb/836941

    by running the Fixit on this page, you can reset to windows update components.  but, if there is malware present, she will continue to reset the connection to the update servers: how toreset windows update components

    suggest you download and save the Fixit.  then conf is the boot vlean system before you run it:http://support.microsoft.com/kb/971058

    How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7http://support.microsoft.com/kb/929135

    Once the Fixit has been downloaded and the system is started in the pure State, check that the native vista firewall is now on if a 3rd party firewall has been used previously.  now run the Fixit and choose the default mode.  restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode.  turn it back on when he finished the race and updates.

  • Windows Update KB948465 8024200d error code failed.

    Windows Update KB948465 8024200d error code failed.

    How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
    [0 x Error 80070002; 0x8007000D; 0 x 80073712; 0x800B0100; & 0x8024200D]
    http://support.Microsoft.com/kb/947366

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Windows Live Photo Gallery error code: 0x800736b1

    Windows Live Photo Gallery error code: 0x800736b1 (window live photo gallery encountered an error loading WLK Photo LibraryMain.dll and cannot start.  Need to know how to fix it

    I got tired of what you say, and it has not fixed the problem. always the same error message. I tried to uninstall and reinstall windows live photo Ghent will not always work.

    Hi tlc33kac

     

    You can check the links below and check out them if the steps to help you resolve the issue-

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/i-try-to-open-a-photo-on-Windows-Live-Photo/74e26c19-9376-E011-8dfc-68b599b31bf5

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/error-codes-ox80073661/e2b11700-fe86-4663-8f27-731b67ebaf12?msgId=b95e5d54-5da2-497d-a2fc-80a9ec672a59

    If the problem persists, you can contact the Windows Live support team. I would recommend posting your query to community specific to Microsoft Windows Live. Please visit the links below to find a community that will support what ask you in the right direction for Windows Live.

    http://windowslivehelp.com/product.aspx?ProductID=20

     

    I hope this helps.

  • Try to install 4 ' important'updates on Windows Vista and get error codes: 80070641.

    Try to install 4 ' important'updates on Windows Vista and get error codes: 80070641, who has had a lot of answers posted but none does not seem to work and I tried to install this upgrade for the last 6 months! (I did one where you made sure something is running in the Control Panel, but it works just not - I HATE Vista!)

    Now just got a new error code: 6 to 8.

    The updates, I can't update (!) are:

    1. SQL Server 2005 Express Edition Service Pack 4
    2. Update of security for MSOffice 2007 System
    3. Update for MS 2007 Office system
    4. Update for MSOffice Outlook 2007 Junk email filter

    Unfortunately I'm not technically proficient at all and do not understand the jargon I've read on this site so if anyone has an answer, please could you write it as if you were talking to your grandma who only discovered what a mouse!  ;-)

    Thanks in advance

    Sharon

    original title: error codes: 6-8 and 80070641

    Hello

    see if that helps to fix:

    How to reset the Windows Update components?

    There is also an automatic 'fix - it' here

    http://support.Microsoft.com/kb/971058

    Also, try to put the KB numbers in the search on the link below and then manually download the

    http://www.Microsoft.com/downloads/en/default.aspx

     

    or please repost your question in the correct windows update forum

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  • When you install Windows 7, receive the error Code 0 x 80070490

    At the beginning of the installation of Windows 7, I get this error message.

    * original title - Error Code 0 x 80070490 Windows Setup can't find a place to store temporary installation files. Intall Windows, make sure that a partition on your startup disk has at least 686 megabytes of free space

    Try these suggestions:

    Error 0 x 80070005 occurs if the upgrade doesn't have permission to the folder writecertain. Try the following steps:

    Reset permissions
    ============

    1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads

    2. go to your desktop and double-click on the downloaded file.
    3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.

    4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
    5. copy the following commands, and then paste them into the opened Notepad window:

    off @echo

    Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
    Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
    Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
    Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f

    Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
    Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
    Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
    Subinacl % lecteur_systeme % /subdirectories / Grant = system = f

    @Echo =========================
    Completed @Echo.
    @Echo =========================
    @pause

    6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

    7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".
    8. you will see a window of type BACK treatment.

    NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

    If the same thing happens, move to the next step.

    Run the upgrade by using the built-in Administrator

    ================================

    1. click the button start-> all programs-> Accessories.

    2. right click on command prompt and select "run as Administrator".

    3. click on continue when user account control window appears.

    4 copy the following command and press ENTER:

    NET user administrator / Active: Yes

    5 restart the computer and then log on the computer of this administrator account.

    6. run the upgrade to windows 7.

    Error code 0 x 80070005 usually indicates that you don't have enough privileges or the operation is blocked. I know, some programs (Boot Camp on a Mac PC, etc.) is not compatible with Windows 7, if you have installed these programs on the computer, you may not be able to perform the upgrade.  You should uninstall these programs before upgrading. In addition, such a question may be related to UAC, I recommend you turn off UAC in Windows Vista, if you have installed security software, try uninstalling the security application as well.

    BTW, for your references, I found similar questions:

    Windows could not create a required installation folder. Error code: 0x80070005
    http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/d04e9cf3-3eae-4A1F-a9f8-e2c5ed88d183/

    "Cannot create file" error when you try to install Windows 7
    http://social.technet.Microsoft.com/forums/en/w7itproinstall/thread/3621e8cf-B2CE-479b-BEAC-08acc435a856

    Error 0 x 80070005 when upgrading to windows 7 from vista
    http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/08986904-c822-4801-95a5-55ddd5aadcea/

    See also:

    http://social.answers.Microsoft.com/forums/en-us/w7install/thread/cb679e27-f2e6-4CD5-b708-a4992cec5a9d

    CREDIT: Dale Qiao Microsoft, host and cdobbs releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP

  • Access to the Windows Update site 0x8024402C error code failed?

    Access to the Windows Update site 0x8024402C error code failed? Regds, 'a journey of a thousand miles begins with a first step."

    Resolution: 0x8024402C error Code

    Method 1: Remove the characters from the list of exceptions to the proxy and then clear the proxy cache to do this, follow these steps, as appropriate for the operating system that you are running. Windows 2000, Windows XP and Windows Server 2003

    1. Open Internet Explorer.
    2. On the Tools menu, click Internet Options.

      Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

    3. Click the Connections tab and click LAN settings, and then click Advanced.
    4. Remove all the entries in the Exceptions section, and then click OK.
    5. Close Internet Explorer.
    6. Click Start, run, type cmd, and then click OK.
    7. Type the following commands. Press ENTER after each command.
      • proxycfg d
      • net stop wuauserv
      • net start wuauserv
    8. Try again to install updates.

    Windows Vista and Windows Server 2008

    1. Open Internet Explorer.
    2. On the Tools menu, click Internet Options.

      Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

    3. On the Connections tab, click LAN settings, and then click Advanced.
    4. Remove all the entries in the Exceptions section, and then click OK.
    5. Close Internet Explorer.
    6. Click Start
      The collapse of this image enlarge this image

      , and then type cmd in the box start the search.

    7. In the list of search results, right-click on Cmd.exe, and then click Run as administrator.
      The collapse of this image enlarge this image

      If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    8. Type the following commands. Press ENTER after each command.
      • netsh winhttp reset proxy
      • net stop wuauserv
      • net start wuauserv
    9. Try again to install updates.
     

    Method 2: Enable the option "Automatically detect connection settings" in Internet Explorer to do this, follow these steps:

    1. Open Internet Explorer.
    2. On the Tools menu, click Internet Options.

      Note If the Tools menu is not available in Internet Explorer, press the ALT key to display the menu.

    3. On the Connections tab, click LAN settings.
    4. Click to select her automatically detect settings check box, and then click OK.
    5. Try to install updates again.

    Kind regards
    Sohail Patel Regds, 'a journey of a thousand miles begins with a first step."

  • Windows Update 8007371 B error code «»

    I spent from Vista to Windows 7, use PCMover to help transfer. I'll have two problems (1) won't install Norton anti-virus (Norton is okay) and update of windows gives me an error code "8007371B".  Any ideas? Thank you

    Try:

    Description of the system update tool for Windows Vista, Windows Server 2008 for Windows 7 and Windows Server 2008 R2http://support.microsoft.com/kb/947821>

    The 0x8007371B error can be caused by an irregularity of the system that theSystem Update Rpoints Tool may be able to solve. However, the tool may be unable to fix all instances in which these errors occur.

  • (KB951847) x 86 has error code 0 x 643

    Update installation failure what to do?

    When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
    http://support.Microsoft.com/kb/923100

    When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
    http://support.Microsoft.com/kb/976982

    Windows Update error Code 663 (kb951847) x 86 fails to install

Maybe you are looking for