Windows XP Pro 64: ask to activate a second time

Installed new copy of XP64 Pro a few weeks ago. The software install and active very well. Now, I get the following messages:

(a) you need to reactivate within 3 days because there was a major change in the components of pc. There has been no hardware changes. Reactivated again with success.

(b) a request to send error Microsoft reports that I had previously chosen "Do not send".

I downloaded a number of post installation of security updates. One of them would be responsible of the above?

Any help is appreciated.

Warrior.

"CelticWarrior" wrote in message News: 9fd98f30-2d 98-4db4-b395-faba21f04a43...

Installed new copy of XP64 Pro a few weeks ago. The software install and active very well. Now, I get the following messages:

(a) you need to reactivate within 3 days because there was a major change in the components of pc. There has been no hardware changes. Reactivated again with success.

(b) a request to send error Microsoft reports that I had previously chosen "Do not send".

I downloaded a number of post installation of security updates. One of them would be responsible of the above?

Any help is appreciated.

Warrior.

XP sometimes requires reactivation after pilot installations (this is why I always leave activation until the system is fully updated, if possible) where pilots can change the description of the material that Windows uses to check the validity of the activation. Most often this happens after upgrading motherboard drivers and BIOS.
 
HTH

--

Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

Tags: Windows

Similar Questions

  • can I use windows 8 pro product key to activate 2pcs

    I had to buy windows 8 pro but I can't find in the mail what can I use this product key for activation 2 pcs?

    Thank you

    As with other versions of windows, 1 licensed by activation on a PC.  You will need to purchase a second license.

  • I did a clean install of Windows 10 PRO - how can I activate the desktop mode

    Before I did the reinstall - I had this option when I right click on the task bar to activate the battery icon desktop mode.

    If someone please tell me what a piece of software that I should download to re - activate?

    Thank you!

    There is no Quickset software for this particular laptop - so I went through every download on http://www.dell.com/support/home/us/en/19/product-support/product/alienware-15/drivers and I finally installed "Alienware on Application of on-screen display" - after the restart it was back.

    However, it is not really intuitive.

    Thank you ieee48 and Mary G for big ideas.

  • I just bought a refurbished dell w / Windows xp pro. How can I activate

    I just bought a refurbished dell laptop w / Windows xp pro.  How to activate the window or register?

    Thank you

    Noramally I expect activation to be Internet standard-however, you may need to activate by phone...

    If you encounter problems, correctly thenTo analyze and solve problems with the Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
    Once saved, run the tool.
    Click on the button continue, which will produce the report.
    To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
    -IN YOUR OWN THREAD, please

  • can I use a full license of windows 8 to activate windows 7 pro install

    I have a clean install of Windows 7 Pro that I need to activate. Can I buy a complete retail 8 Windows Installer and use the license to activate my Windows

    7 pro install until I'm ready to start clean with a pro version of Windows 8?

    I have a clean install of Windows 7 Pro that I need to activate. Can I buy a complete retail 8 Windows Installer and use the license to activate my Windows

    7 pro install until I'm ready to start clean with a pro version of Windows 8?

    A Windows 8 Pro product key cannot activate Windows 7 Professional. The two unique product separate keys.

  • Pass license MSDN Windows 8 Pro of VM to real PC

    Hello

    I've been rate switching PCs of Windows 7 Pro for Windows 8 Pro on a VMware client for some time using a MSDN license key.

    I solved all my questions and I am now considering buying a PC of Windows 8.

    My question is:

    Can I use the Windows 8 pro license key that I used on the VM client to upgrade a new PC bought with Windows 8 Home Windows 8 Pro?

    As long as you unset the virtual machine, you can move the license for the new PC.

    Press the Windows key + X

    Click System

    On Windows, click the link:

    Get more features with a new edition of Windows


    Click on the "I already have a product key link.

    Enter your product key and you will be promoted to the Pro.

    You will need to reactivate by telephone, because the license was already in use:

    Activation of the phone:

    1. press the Windows key + X , and then click run, and then type: slui.exe 4


    2. then press the ENTER"" key.

    3. Select your "country" in the list.

    4. choose the option "activate phone".

    5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

    6. explain your problem clearly to the support person.

  • Windows XP pro update page 0x8024400A error number

    I'm on my pc Windows XP pro and since I format, distribution it over and over and then re install Windows XP pro again and again (9 or 10 times) in the last week.,.

    I can't work Windows XP update page.

    I get "" error number: 0x8024400A this website has encountered a problem and cannot display the page you are trying to show. ' "

    All suggestions on this site of Microsoft points people he difficulty page.

    How to practice, this will not work unless Windows XP SP3 is installed.

    Is there something silt, then this thing stupid construction of Microsoft, to find the solution on how to solve an error with windows XP pro updates?

    I just don't feel the HD reformatting and waisting my time again and again when I have the same problem each time.

    BTW, someone read this if you have to re install windows XP and plus size your time by signing up immediately as you will certainly have to start over and over again!  MONEY IS good TIME BILL! Laughing out loud

    Hi phoe_nix,

    (1) what is the update that you are trying to install? I would like to the KB article number.
    (2) what are the troubleshooting steps you have tried to solve this problem?
    (3) did you change on your computer recently?

    I suggest to try the steps in the following link and check if it helps.
    You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or

    http://support.Microsoft.com/kb/943144

    Hope this information helps.

  • Windows 8 Pro screen metro problem

    Nice day.

    Lately I've been having problems with Windows 8 Pro, they are working well for some time and suddenly begins to bind, the programs that are used when it is reduced to stay above the start bar, I can't open settings and when I open the meter screen stays frozen and I can't get on there is a problem that I have more than 5 computers I checked the event viewer and there's a mistake with ID 10016 follow-up DCOM problems some steps to FIX and good that already get no error, but metro still freeze

    Hello Alejandro,

    Thanks for posting your question on the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    What is the brand and model of the computer?

    Thank you for details on the question and your efforts to resolve.

    This problem may occur because of the presence of viruses or malware.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Run the system maintenance utility and check. Please follow these steps:

    a. press Windows + W keys, type Troubleshooting in the search box and press ENTER.
    b. click on 'show all' and then click on "System Maintenance".
    c. click 'Next' and follow the on-screen instructions.

    If this does not help, use method 2.

    Method 2:
    Microsoft safety scanner run and check the issue.
    Reference:
    Microsoft safety scanner
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

    Thanks for your reply, but it has been affected by an update from Microsoft (KB3033889) as incompatible with written Chinese, the resolution of this problem with the fix KB3048778

  • I'm really hearing in 2008. Now I updraded to windows 10 it did not work, but it worked fine on windows 7 pro, he is asking to activate your server is down and the telefon * is not available. What should do?

    AAudition does not work on windows 10 ask you an activation code. No work is available. I have not been informed that the server should be stopped or that the telservice was not available. Now, I returned to windows 7 pro, but he asks still activationcode I get the err 24:24

    HI Robertg77843012,

    As you know, the activation for Audition 3 or earlier server is no longer available. Adobe has made a special version of CS2 provision affected customers, and he is hearing. The special version can be downloaded and activated by following the instructions contained in this help document: error: "Activation Server unavailable". CS2, Acrobat 7, pass a hearing 3. Please note that you must use the special version with the serial number supplied during installation. Your existing serial number will not work. There is also no guarantee, as the Bani, the old software will work in newer operating systems. However, it is worth a try.

    Let us know how it goes or if you have any other questions.

    Best,

    Del

  • Need help, can't activate Windows 8 Pro on HP 3125

    I got a netbook HP 3125 which has an AMD E2 APU, 4 GB ram, 320 HARD and Windows 8 Pro disc and would use for about a month and well. Recently, I decided to update my ram and anything by doing this, I also decided to upgrade to an SSD HARD drive.

    I changed the HARD drive out and installed the SSD, but the BIOS doesn't detect so I disabled the Secure Boot, boot enable Legacy and then proceed to installing a custom installation of Windows 8 Pro using a USB key.

    After installation, it asked me a product key, which I find it weird because Windows 8 does not come with product key labels, since it is built into the bios.

    My problem is, how do I activate my Windows 8 Pro, when it keeps asking me for a product key that I don't have?

    Also, I noticed in the BIOS, it is sometimes called 'Key to load HP factory default', but I can only do this when secure startup is enabled.

    Embedded product key Windows 8 has something to do with the secure boot, for example, if the Secure Boot is disabled, then Windows 8 will not activate?

    Thank you

    Woot! I got it to work!

    Secure boot has nothing to do with the activation of Windows 8 or not with the COA embedded (product key) which is in the bios.

    Here's what I did, just note that this method may not be appropriate measures, but it still works. And different systems configurations, may require different or additional measures. Also, this method may or may not work with all systems.

    for example, the brand or the system you may or may not work with the steps posted in this thread.

    If you have a Windows 8 with a product key that is located on a sticky label, this does not apply to you. It's only for those who have purchased a brand name with Windows 8 system, and it does not come with a sticker product key.

    Components used in this tutorial

    -3125 Netbook HP: AMD E2/6 GB/Intel of the Commission 330 120 GB SSD/F27 bios (later at the time of this tutorial)

    -Microsoft Windows 8 Professional 64-bit (original) disc

    -SATA to USB 3.0 adapter

    -Lite-ON SATA DVD Writer

    1. turn on the system and press F10 to go into the Bios

    2. in the bios, go to trial system > Boot Options

    3. go to Secure Boot and disable it

    4. Select clear all Secure Boot key and enter the 4-digit confirmation code

    5. then go to support HP Factory Default Keys, select it and press Yes

    6. save the Bios and output

    7. Press F10 and return in the Bios

    8. go to the System Configuration > Start Options

    9. select Legacy Support and activate it. A warning message appears, saying that this may cause the operating system to boot, just ignore it and press Yes.

    Now you should see the following text:

    Legacy support = on and key = registered platform

    10 save the Bios and output

    11 insert the disc of Windows 8 for the DVD player and release the boot drive order by pressing F9

    12. the driver, select start from the EFI file and press on enter

    A window opens, showing the HDD/SSD and DVD player with a unique code next to each hardware device

    13. Select EFI sector DVD and press ENTER.

    14. then select , , Bootx64.EFI. After that it will be white and then asked at the start of the DVD.

    15. Press any key to boot from the DVD. If it's done correctly, you will see a HP start-up logo

    16. once the DVD has finished initializing, will appear on the screen of configuration of Windows 8. Click next

    17. accept the EULA and then select custom installation

    18. create a new partition on the disk that you want to install the operating system.

    Note: Windows will create 3 additional partitions, as well as for the installation of the OS. What makes the drive as GPT.

    19 install Windows 8

    20. after the installation and customization of personal settings. Go to control panel > system and you will see

    Windows 8 is activated.

    You can either enable or disable Secure Boot in the bios, as it has no effect on the question of whether or not the operating system will boot. I tried the two enable Secure Boot and disabled, the two parameters allows me the startup of the operating system.

    As Intel 330 SSD, I got two of them and both have no problem running Windows 7 or Windows 8.

    ACHI is necessary if you want to enable TRIM that optimized the SSD automatically when you have to.

    If the TRIM does not work, then it must rely on a Garbage Collection.

    To turn off the SSD on Windows 7, schedule defrag because this will reduce the life expectancy of the SSD

    Windows 8 should because it will recognize if it of a SSD or not. If this is the case, then it will send the TRIM command.

  • My Windows 8 Pro product key does not work to activate my copy of Windows 8 Pro

    My work of Windows 8 product key is not

    Step 1: Yesterday I bought a new hard drive clean Virgin and I bought Windows 8 Pro at a local big-box store. It is a complete copy. Not an upgrade.

    Step 2: I removed all the other my system HARD drives and installed Windows 8 on the new hard drive. The system asked product key. I went in and everything installed perfectly. Windows works fine. I like it.

    Step 3 However, when I went to 'activate' my copy of Windows 8 and I enter this SAME product key, that I used to install I get the following message "this key did not work. Check it out and try again, or try a different key. "I repeated this step at least 4 different times after the reboot. Still does not accept it.

    Question: I can not activate my new copy of Windows 8. How can he accept my key for installation and then NOT accept for activation?

    Help!

    JWM

    The problem was solved!

    Step 1: I called Microsoft support MICRSOFT (800)

    Step 2: I navigate through all voice menus for installation tech Support for Windows 8

    Step 3: I explained the problem to the technology (Jerry)

    Step 4: The tech had me find the search function and he get a function of 4 letters (I forgot the command). I executed the function, and I got to a screen that asked me to enter a code for the Microsoft Technical Professional. I entered the 8 digit code that the tech provided for me.

    Step 5: I get to a new screen and technology (Jerry) explains that I am turned on.

    Step 6: I restart my PC and I go to the 'System' page in the control panel and it shows that my copy of Windows 8 is activated!

    The Tech explained that my copy of windows is an "upgrade" version (it isn't) and that is why I got the sentence. I explained repeatedly that it was a COMPLETE copy.  Finally, I dropped my 8 Windows has been activated.

    Call the technical support and good luck!

  • Can I activate and save my Windows XP PRO after its end of Support

    The end of Support for Windows Xp PRO is this 2014, can I still activate it if ever I will plan upgrade beyond 2014.

    Yes - MS will continue to offer XP Activation services beyond the end of life.

    They also promised at one point issued a patch to remove the conditions of activation - but don't hold your breath! :)

  • audio player on windows XP Pro THAT has been disabled. How to activate?

    audio driver Windows xp pro has been disabled. How to activate?

    Hello

    I think that Dave may have forgotten to link the actual instructions:

    No sound in Windows

    hope this helps,

    B Eddie

  • Error: 0 x 80070002 is impossible to activate Windows XP Pro.

    Original title: cannot activate Windows XP Pro.

    Here is the output of MGADiag. I use an XP Pro OEM CD and I've confirmed with Microsoft Support that my Windows (on a COA attached to the PC) key is genuine.

    Diagnostic report (1.9.0027.0):
    -----------------------------------------
    Validation of Windows data-->
    Release status: not activated
    Validation code: 1
    Code of Validation caching: n/a
    Windows product key: *-* - XD49X - 28Y9R-HB2GT
    Windows product key hash: Y4w6nslkak7wEiGSx9Hq5V4u3oQ =
    Windows product ID: 51882-OEM-2266525-54742
    Windows Product ID Type: 3
    Windows license Type: OEM System Builder
    The Windows OS version: 5.1.2600.2.00010100.3.0.pro
    ID: {8C0C1BCA-A28F-4996-B861-8D73249CF9D7} (3)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: Registered, 1.9.42.0
    Signed by: Microsoft
    Product name: n/a
    Architecture: n/a
    Build lab: N/A
    TTS error: n/a
    Validation of diagnosis: 025D1FF3-230-1_025D1FF3-238-2_025D1FF3-258-3
    Resolution state: n/a

    Given Vista WgaER-->
    ThreatID (s): n/a
    Version: n/a

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 109 n/a
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: B4D0AA8B-543-80070002_025D1FF3-230-1_025D1FF3-238-2_025D1FF3-258-3

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Win32)
    Default browser: C:\Program may Explorer\iexplore.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->

    Other data-->
    Office details: {8C0C1BCA-A28F-4996-B861-8D73249CF9D7}1.9.0027.05.1.2600.2.00010100.3.0.prox 32*-*-*-*-HB2GT51882-OEM-2266525-547423S-1-5-21-507921405-484763869-1801674531Hewlett-PackardHP Compaq dc7600 Small Form FactorHewlett-Packard786 1 v01.6120090701000000.000000 + 0008F623F070184E06608090409GMT Standard Time(GMT+00:00)03109

    License data-->
    N/A

    Windows Activation Technologies-->
    N/A

    --> HWID data
    N/A

    Activation 1.0 data OEM-->
    BIOS string matches: Yes
    Marker of the BIOS string: 8619:Compaq Computer Corporation | CF 116: Compaq Computer Corporation | 1FFEA:Compaq Computer Corporation | E618:Compaq Computer Corporation | 11723:Compaq Computer Corporation | 11723:Compaq Computer Corporation | 1FFEA:Hewlett - Packard Company. E618:Hewlett - Packard Company
    Marker of OEMBIOS string. DAT: N/a, hr = 0x80004005

    Activation 2.0 data OEM-->
    N/A

    Hello

    1. have you done any hardware changes or software on your computer before this problem?

    2. why you try to activate Windows XP?

    You can follow the steps in this link & check if the problem persists:

    Receive information that all of a sudden my product key valid once for Windows XP Professional is no longer valid

    Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Reference: Support for Microsoft product activation problems

    Please post back & we do know.

  • I try to use a pro 7 product key offical windows to activate windows 10 pro, but it does not work?

    I try to use a pro 7 product key offical windows to activate windows 10 pro, but it does not work?

    If I search on possible improvements, he says it should work?

    Try the chat support:

    Activate your Windows 10 license with Microsoft Chat support

Maybe you are looking for

  • Yoga book: switching of haptic feedback?

    Hi, does anyone know how to disable the haptic keyboard Halo? Turn volume just does not work, also, I can't find any option for this in the system settings. I really like the Tablet, but the noisy reactions makes the unusable keyboard for me.

  • Satellite A300-1 MB card mother needed part number

    Can give it please for me the reference number of the Satellite A300-1 MB motherboard?. Thank you.

  • Part 2. Welcome screen

    I can't find my question here on the windows logon Welcome screen... I asked about yesterday... That is to say however that I have to uninstall my client for NetWare as services it disabled the Welcome screen and the fast user switching...  I can't p

  • Availability of HDMI G60-519

    I have a laptop HP-G60-519, and I noticed a plugged HDMI port. There is a HDMI adapter to add for this model or it required a different motherboard integrated HDMI output? Any information on this matter would be greatly appreciated.

  • HOWTO: Sign applications Webworks help CMD

    How can I register a webworks app using CMD? There seems to be two different statements: Instruction1: http://docs.blackberry.com/en/developers/deliverables/23977/Configure_signing_for_tablet_application... I tried the above statement and get the fol