Windows xp Pro chkdsk keeps running over and over again at the start and...

Running the scan and says no errors found and windows has finished checking the disk and then rest on this screen. I'm unable to boot in a mode, including 3 Safe Mode options. Please help me to help my friend with this problem on his Dell PC.

Before this error occurring, we run a defragmentation and planned Windows to check the drive for errors.

Cannot start in safe mode as lists of lines of code system32, then freezes.

Many Retarts have not helped.

We have not cahnged anything using F2 or F12 to change Boot & startup menus.

When XP restarts, it checks the "dirty bit" on each volume (hard disk) to see if a chkdsk needs to be run on the volumes.

The dirty bit can be defined on a volume if you had a power failure or may have used the power button, had an aborted restart or an abnormal termination.    The only way to clear the bit of impurity on a volume is successfully running chkdsk with error correction (chkdsk/r).

If you have a regular chkdsk in the meantime, he'll also want to run when you restart the system.

When you start in Safe Mode, if one of these conditions are met, XP run the chkdsk command, and during this time, your system will be appear to be stuck, frozen or appear to hang with the last thing on your screen being loading mup.sys - shortly after charges mup.sys is when the chkdsk will start running and the system seems to be stuck.

This suggests that their system is hung on mup.sys when he's really hung at all - chkdsk runs is because it takes or they old to many people is by planning the chkdsk at the next reboot.

I don't know what AVG load and will not install AVG to know.

If your system seems to stop mode without failure and the last thing you see on the screen is mup.sys (or in your case of the stuff AVG), look at the HARD drive access light.

If the HARD drive is flashing, chances are good that the chkdsk command runs either because it takes or it, you have planned.  In this case, you will need to wait outside and if you use the power button, you could make things worse.

You will need to wait outside and this could take some time depending on the size of the volume, the amount of data on the volume and what chkdsk finds to do.

I think that I start your system in the XP Recovery Console and run chkdsk /r from there, so that you can actually see race and what he has to say.  If that chkdsk /r works own (it might take more than one pass), which erases the volume dirty bit.  It will not relieve your a regular chkdsk system, but I would start there.

Tags: Windows

Similar Questions

  • When I go to Windows 8 for Windows 8 Pro, I keep my data?

    Hello Microsoft community!

    I have a laptop Lenovo G470 with Windows 7 Starter pre-installed and I upgraded to Windows 8, but I did a clean install. Now I have a new data. When I go to Windows 8 for Windows 8 Pro, I keep my data?
    PS: Also, if I have the Windows Media Center on my laptop, should I buy a tuner for TV even my laptop's HDMI?
    Thank you to answer!

    If you use the Windows 8 Pro Pack for the upgrade of Windows 8, your personal files, applications, and settings will be preserved.

    To the top of Windows 8 for Windows 8 Pro:

    http://Windows.Microsoft.com/en-us/Windows-8/feature-packs

    If you already have a key Windows Pro 8, you can use the following method for upgrading and your files, apps and setting will be retained.

    Press the Windows key + X

    Click System

    On Windows, click the link:

     

    Get more features with a new edition of Windows

    Click on the "I already have a product key link.

    Enter your product key and you will be promoted to the Pro.

  • My compaq presario has crashed and I lost everything, don't have the disc anymore so I need to reinstall Windows XP pro sp2 but no disc and there is nothing in the partision

    don't have the disc anymore so I need to reinstall Windows XP pro sp2 but no disc and there is nothing in the partision

    Hello

    Thanks for posting the question in the Microsoft Community!

    You can't use the computer and reinstall the operating system.

    To help you better, we need more information.

    1. What do you mean by computer crashed? Do you get any error messages?

    2. is the computer, a laptop or desktop?

    If you use a laptop, you can contact the computer manufacturer to get an installation disc.

    If you need any help or if you encounter problems with Windows in the future, let us know and we would be happy to help you.

  • I'll be able to reuse my Windows 7 Pro CD for my MacBook and it produces is essential, given that is is not active on any machine?

    Hello

    I had installed Windows 7 Professional on my pc and later updated to upgrade to windows 8. I have now bought a MacBook Pro and I am hoping to use Bootcamp to partition my hard drive, to allow me to use Windows as OS X. So, I have a few questions.

    1. I'll be able to reuse my Windows 7 Pro CD for my MacBook and it produces is essential, given that is is not active on any machine?
    2. If this is not the case, what is recommended?

    Thank you

    Original title: Windows 7

    Only the Windows 8 OEM System Builder licenses are full versions. The retail version of Windows 8 is not a full version, but an upgrade and requires a previous version of Windows (XP, Vista, Windows 7 installed) in order to use it.

    Commercial versions of Windows 8.1 are full versions. Have different product keys is not a full version.

  • I am using Windows XP Pro SP3. IE8 or FF8 can open all the links that appear in my subscription newsletters.

    original title: links in e-mail newsletters don't work

    I am using Windows XP Pro SP3. IE8 or FF8 can open all the links that appear in my subscription newsletters. The message I get is:

    Firefox can't establish a connection to the server...

    Because this happens with both browsers, I suspect that some settings in Windows is the origin of the problem - maybe an update. Everyone knows about this type of behavior? Someone at - it suggestions for me?

    Hello

    This information should be useful.

    1. the HOSTS file would have an impact on all browsers. If you do not deliberately use the HOSTS file to block some websites, run the FixIt in this article to reset (clear on) the HOSTS file.
    How can I reset the default Hosts file? :
    http://support.Microsoft.com/kb/972034

    2 key is only, but go to Internet Options > privacy and try a cookie of low value or accept all.

    3. from security on the IE command bar > InPrivate filtering settings, disable filtering.
    Always safe > Filter SmartScreen > disable the SmartScreen filter.

    4 disable third-party security programs (antivirus, antispyware, firewall, etc.) * just long enough * to test some links.

    5. similar to the #3, but more in depth...
    The clean boot troubleshooting, try.
    331769-how to perform a procedure to clean boot (XP & Vista)
    http://support.Microsoft.com/kb/331796

    Don

  • How can I get Windows 7 Pro 32 bit automatically connect to drives mapped to the startup?

    How can I get Windows 7 Pro 32 bit automatically connect to drives mapped to the startup?

    Hello

    It should connect as much as the other computers with their car are on the account users are properly configured, security passwords are defined and firewall do not block.

    If the system is only yours and there is no need of local network security, enable the guest account on all computers, give them all the permissions and there will be less to worry about connection mapped, but local drive without security.

    PS Ce preceding is based on cable connections. If the connections are wireless, it's another story.

    Due to the maturity of the wireless adapter and their support through the OS, automatic connection could not occur.

    Wireless is great, but most of us try to sneak out of it the uses it was not designed for.

    -------------------------------
    My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.

  • I try to install LR CC in the clouds of Creativ (10 times) on Mac, and as I propose to iCloud and you logout log in again. The start icon poster for a short time an it's all... need an uninstall of the old LR? Or what to do. Daniel Berne

    I try to install LR CC in the clouds of Creativ (10 times) on Mac, and as I propose to iCloud and you logout log in again. The start icon poster for a short time an it's all... need an uninstall of the old LR? Or what to do. Daniel Berne

    Thank you very much for your help. step by step, I did excatly how you propose. but the success of the moment. When I startet I wish the application to the front of the CC 2015 to up and down... a little more time... and I waited with passion but nothing else happens. my contract with adope is ok and PS the LR old books.

    Best regards

    Daniel

    Sorry for my English

  • (1) in windows 8 pro can I run windows defender and 3rd party antivirus [like Mcafee] at the same time?

    Today, I have improved my final from Windows 7 to Windows 8 pro.

    (1) is Windows Defender, it works both as the same as MacAfee antivirus software?

    (2) if I use windows defender in windows 8 pro, do you think that I still need 3rd party antivirus software to protect against viruses and malware?

    (3) can I activate and simultaneously run 3rd party software [McAfee] antivirus and windows Defender 8?

    (1) # Windows Defender is an anti-spyware, and Mcafee's anti-virus.

    (2) Yes

    (3) Yes

    UTC/GMT is 03:46 Sunday, October 28, 2012

  • Windows XP explorer.exe keeps hanging, freezing and crashing

    Recently installed the new copy of Windows XP SP2 on a new SSD and updated to SP3. My old hard drive is used to store the data now. I also have an external hard drive. I have 4 GB of RAM installed (I know Windows uses only about 3).

    The problem I have is that whenever I try to transfer files, transfer files slows down a lot. I could transfer a 60 MB file with extension .db for my external hard drive on the internal storage drive and the file transfer will tell 10 seconds to 20 seconds remaining, and it takes forever. If I cancel the file transfer, sometimes, I'm unable to close windows Explorer, or change files or right click on the files. They can do a text "not responding" appear next to the title. Usually, my Start menu and task bar becomes disabled/inaccessible. I can't click on things, do a right click or use the windows key. Sometimes I have to force quit the explorer.exe, and sometimes it hangs on its own. The start menu disappears and if I have "explorer.exe" Task Manager, it opens a new window of Solution Explorer, but I have to restart to get everything working again.
    For my SSD, I use Samsung magician and have disabled disabled prefetcher, of indexing and my samsung magician set power settings. I updated the Intel controller for readers, and "Write cache" is enabled in the strategies of discs. I also tried to switch off the Protection of data for explorer.exe running, but it does not work and currently I have DEP on for everything. This suspension occurs sometimes, simply browsing through Explorer. I installed a 3rd party file 'ExplorerXP' Manager but met the same problem there. I also ran chkdsk and Defrag the interal storage disk. All my services are at their default settings.

    Thanks for the reply. I have only the OEM drive, so I can't run the System File Checker. I have run chkdsk, and everything came back fine. Regarding anti-virus, I was using windows security essentials.

    I went ahead and bought a new hard drive. I backed up my files on external hard drive, course deleted my SSD and formatted the embarrassing internal drive. Installed the new hard drive and installed the new OS on the SSD.
    With the new drive and installed former player, I noticed that still send me in trouble. It works, but is very slow when copy/transfer of large files. I unplugged, unless you know how I could make a use - for example to keep more small files less than 30 MB on it.
  • Windows 8 Pro would be runs Qosmio G40?

    Does anyone know if the QOSMIO G40 running Win8 Pro?

    System is 'only' 4-year-old and Win7 Ultimate without any problems.
    However, some drivers for Win8 are found...

    The only found drivers are following [this | family = 381 http://nl.computers.toshiba-europe.com/innovation/windows8_drivers.jsp?service=NL&selCategory=2&selF & selSeries = 229 & selProduct = null & selShortMo d = null & language = 12 & selOS = 42 & selType = all & yearupload = & monthupload = & dayupload = & useDate = null & mode = allMac hines & search = & action = search & macId = & country = 3 & page = 1] page

    Any suggestions?

    You can install the Windows 8 on all computers that would meet this hardware configuration.
    http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

    Pilots win 8 out for all the portable Win 7 appearing in this list:
    http://APS2.toshiba-tro.de/KB0/TSB2A03EU0000R04.htm

  • I get a server error live when I try to load Halo 2 in windows 7. I Shadow Run responsible, and I am disconnected. It worked fine on vista 64. Can I disable Windows Live? I use the game as independent.

    Upgrade to Windows 7 Pro 64.   Loaded Shadow Run, works well, tried to play Halo2, which was already on the machine, and it does not open.  I get an error message that the server is already running.  I tried the compadiblity box and disconnected the modum by forums, it still does not work.  Thanks for all the ideas.  Mike Moczan

    Hi, Mike Moczan,.

    Welcome to the Microsoft Answers site!

    I suggest you to load the game in a clean boot state to see if the problem is not caused by the interference of any third-party application.

    To perform a clean boot on a computer that is running Windows 7, follow these steps.
    1. click on start, type msconfig in the search box and press ENTER.

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.
    3. under Selective startup, clear the check box load startup items.
    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
    5. click on OK.
    6. When you are prompted, click on restart.
    7. after the computer starts, check if the problem is resolved.

    If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

    http://support.microsoft.com/kb/929135.

    In addition, see the section on how to restore your computer to a Normal startup mode.

    Concerning
    Varun j: MICROSOFT SUPPORT
    Visit our Microsoft answers feedback Forum
    http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • CHKDSK is run over - all files on the disc are *.dsk - help?

    External hard drive: LaCie (500 GB)
    Operating system: Windows Vista (home edition)

    I store all my information on my external hard drive. One day after I restarted my computer Windows suggested I run CHKDSK on the external hard drive, so I let him do his thing.

    CHKDSK got to 60%, and then there was a power outage at my house. I understand that no matter what CHKDSK is unable to pick up where you left, so now when I load to the top of my external hard drive, all the files and folders that were once there are now gone, all that's left are six or seven files with extension *.dsk. How to recover all my files or let CHKDSK finish?

    I know that once you reformat a computer shops who can always there all the information the back before the format, so I know that there is a way to solve this problem / recover my files, however, I'm not so smart that.

    Help, please? Anything would be appreciated.

    Thank you.

    If this is the data that you need to return you will almost certainly need to commit to professional assistance in the recovery of the data.  Programs you think or 'know' are to recover files deleted, which is much easier than the task that awaits you.  These programs almost certainly will not work in the hard disk in this condition, and the more you mess with him it is less likely that a professional will be able to recover the files.

    writing in the new message: * e-mail address is removed from the privacy... *

    External hard drive: LaCie (500 GB)
    Operating system: Windows Vista (home edition)

    I store all my information on my external hard drive. One day after I restarted my computer Windows suggested I run CHKDSK on the external hard drive, so I let him do his thing.

    CHKDSK got to 60%, and then there was a power outage at my house. I understand that no matter what CHKDSK is unable to pick up where you left, so now when I load to the top of my external hard drive, all the files and folders that were once there are now gone, all that's left are six or seven files with extension *.dsk. How to recover all my files or let CHKDSK finish?

    I know that once you reformat a computer shops who can always there all the information the back before the format, so I know that there is a way to solve this problem / recover my files, however, I'm not so smart that.

    Help, please? Anything would be appreciated.

    Thank you.

  • New hard drive, installed Windows XP PRO version 2002 - resolution screen and internet problems

    My Dell has had some problems (patially due to age), so a buddy of mine and I put a new hard drive in it and then installed windows XP Pro.  Installation went great, but now that it's installed, I can not get the screen resoultion to change and I can't connect to the internet.  I feel like with the internet, can I have a driver problem.  I know that the internet works, I'm on it with the laptop right now.  Any suggestions?

    ????  I'm not sure I understand your question. You download the drivers to a place, you will find them, as the office. If you want to put them on a USB stick, copy the files downloaded to the key and take it to the computer target. Copy the files on the computer desktop. Double-click on a file and it will unpack the installation routine starts. Follow the installation wizard. Reset when said to repeat as needed until all the drivers, etc are installed. Subsequently, you can delete the downloaded files from Dell (from installation .exe). MS - MVP - Elephant Boy computers - don't panic!

  • Windows 7 Pro PPTP VPN 807 error and does not connect to the remote server, XP machine connect without problems

    I'm just set up my new windows 7 laptop (Dell Precision M4400) running windows 7 Professional and VPN are not working, they're always bombing with error 807.  "The connection between your computer and the VPN server was interrupted."

    I created a PPTP connection in order to connect to my workplace and connecting I continually receive an 807 error.

    To check my internet etc is work that I have connected to the same place through my existing XP laptop computer (DELL precision M4300) which has the same VPN settings.  Everything connects aok.

    I'm also running ESET as my anti-virus and firewall and that you have disabled it to test (normally I have no problem running this and is also running on my XP laptop).  I also confirmed that windows firewall is turned off.

    I connect wireless at home, internet works fine, firewall has not changed at each end (I manage both ends) and such noted works for my machine also running more XP wireless.

    Hello

    Welcome to Microsoft Windows 7 answers Forum!

    Note to resolve this problem, we have a support professionals who are well equipped with the knowledge on Windows 7 issues, do please visit the link provided below.

    http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

    Hope this information is useful.

    Thank you, and in what concerns:

    Suresh Kumar-Microsoft Support.

    Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think

  • Can I download and install Windows 7 pro with a product key and the USB (No .iso or CD/DVD)

    So my hard drive failed, Dell can replace it but none of the software.  I have OEM Windows 7 pro and Office 2010 versions, which means that I (somewhere) product keys but not record.  Maybe Dell recover disk will work, but it's 7000 mile more away.  I've seen links to download install. ISO (I hope that its official?) but I would have no way to burn to CD, so my question is...

    Can I download a bit of Installer for Windows 7 Pro 64 to install from USB and my existing product key?

    What happened to Microsoft Office 2010 Home & student?
    Thanks for your help guys.
    Can I download a bit of Installer for Windows 7 Pro 64 to install from USB and my existing product key?
     
    Check out the link below for assistance on above:
     
     
     
    What happened to Microsoft Office 2010 Home & student?
     
    Check out the link below for assistance on above:
     

Maybe you are looking for

  • the installation program used HP all-in-one

    my computer don't recognize me as the administrator so I'm unable to install my printer all-in-one psc 2410 HP

  • HP pavilion ze4400: Bios password

    I need to start a live USB drive to run Kaspersky Anti-virus, but my old laptop requires a password to enter setup to change the boot order. FINALLY found the instructions to get a number, which explain it "hash Code of the system. the laptop is pavi

  • issue certificates of 802. 1 x authentication and X 509

    Hello Can someone please help me with the following question: First off I am a guy from Windows Server/PKI/AD etc. rather than CISCO, even if I have a CCNA :) I take care of PKI to my company and will work with the team CISCO that are the introductio

  • Activate Windows 7: not available

    I have used windows 7 holiday and may not Activator becouse show like this: Windows activation:Status: Not availableProduct ID: not available How can I do this?

  • After update, Lightroom grayed out of external editors.

    I have followed the instructions, removed the preferences of the location in Windows (appdata etc.) ... reinstalled Lightroom and Photoshop (CC 2014).  External editors were not blurred only once.  It's only since the last update.Does not help restar