Windows XP Pro on which I run several programs. After the opening of a few applications, I have this message "not enough memory".

Similar Questions

• scripten 2.exe message "not enough memory to run this command. Message "incomplete Installatiion.

  Unable to connect like pop up-drop down comes in every time tried to install cripten 2. exewhich have not installed - message "not enough memory to run this command. Message "incomplete Installatiion.

  It's good that I have a minimum of 107 GB on each of the partitions.help 3 Please

  Hello

   
  1. are you making reference to the connection windows or you connect any website.
  2. how many times you get this pop-up?
  3 - is this error occurs when you run a specific program or out of order?
  4 you did changes to the computer before the show?
   
  5. what program are you trying to install?
   
   
   
   
  Run a virus scan on your computer.
  
  www.Microsoft.com/Security/Scanner
  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.
   
   
  I hope this helps.

• Windows photo printing Wizard error message "not enough memory available"?

  Windows photo printing wizard when trying to print a jpeg photo get error message "not enough memory is available for rocess this command" I talked to my tech guy and he said another customer is having the same problem.  Is this a problem with a recent update?  How to fix?  This worked well before

  You can try try by forming http://support.microsoft.com/kb/315265 of disk error checking
  You can also try the steps in this link http://support.microsoft.com/default.aspx?scid=kb;en-us;241258

• Whenever I go into emails, after the opening of two or three I have thunderbird no longer responds. (Operating system for several months) CAUSE: unknown. Disappeared after the reboot.

  As stated in my question, that this is the case whenever I open emails. After opening with two success or three, I get the message not responding when I try to open the following. This has happened for a long time and is very frustrating.

  Hi Wayne. Thank you for answering my question. I said, that your answer is not

                    solve my problem because I couldn't understand what any of it meant. We usually leave our computer on all the time and a friend who is more savvy than I suggested we turn it off for a while. This seems to have worked.
                            Cheers.   Stephanie.
  

• Not enough memory, but only one partition is almost empty. running Windows XP Home Edition

  My computer says there is not enough memory available to perform the printing.  When I tried to defrag, there is not enough memory to perform this function, either.   Several years ago a friend introduced (then new) computer with 2 partitions - C and F drive.  Everything I've done seems to be on the C drive.  Now the C drive = 935 MB free of 19.52 GB of capacity, while F = 56.62 free 56,79 GB GB.  How to release the rest of the disk on drive F?   There are a few things here, and reading of 'aid', it seems that they would be removed if I deleted a partition.   This computer is now my husband, who use it for e-mails, play Spider and a few Google searches.   I'm no computer expert, so I'm hoping for a simple solution.

  Marjorie

  Your report reveals a number of issues. Your C partition has only 4% of free disk space. You must have a minimum of 15% but preferably 25% of free disk space.

  Normally, the report will contain details of your MFT (Master File Table), but this information is not there. I have not encountered this situation before and at the present time, I do not know its importance. The MFT is a master index of all the files on your computer and their location, which allows the operating system to access all the files needed to perform a given task.

  The reference to the DC4.bak and similar files may be indicating a problem with your trash. This is where deleted files are stored temporarily until the user decides to permanently remove the files. The update of Windows XP SP3 is installed? Right click on your my computer icon and select properties to view details. There were three MS updates and you may not have the latest updates.

  Your version of AVG is obsolete. You have version 8 and the current version is 10.

  You use Outlook Express, and it takes a considerable disk space. You can move the folder to your partition F store. This link explains how:
  http://www.insideoe.com/files/store.htm#movestore

  You can increase the free space on the disk by deleting restore points, keeping the last restoration, using disk cleanup. Follow the instructions on how to do it.

  Select Start, all programs, accessories, System Tools, cleaning disk to emptying your trash, delete temporary Internet files and other selected options. I recommend also you click Other Options, System Restore and delete all but the last system restore point.

  I recommend you download and install cCleaner, which is a best utility disk cleanup, but this would be better done later.

  You can create more free space in C by performing the steps suggested below.

  The default allocation for the restoration of the system is 12% on your C partition is more generous. I have them would be reduced by 700 MB. Make my computer right click on your icon, and select System Restore. Place the cursor on your C drive select settings but this time find the slider and drag it to the left until it shows 700 MB and output. When you get to the settings screen, click on apply and OK and leave.

  A flaw that might be useless which is for temporary internet files, especially if you keep no copies on the disk offline. Setting the default value is 3% of the walk. Depending on your attitude to copies offline, you could bring it to 1% or 2%. In Internet Explorer, select Tools, Internet Options, general, temporary Internet files, settings to make the change. At the same time, look at the number of days, the story stands.

  The default allocation for the basket is 10% of the disk. Change to 5%, which should be enough. In Windows Explorer hover over your Recycle Bin, right click and select Properties, Global and move the slider from 10% to 5%. However, try to let you become so complete that if it is complete and you delete a file by mistake it will bypass the Recycle Bin and have gone forever.

  When you have completed the above, restart your computer and display a new report Disk Defragmenter as well as answers to the different questions, I asked.

• Get when the "not enough memory to process the command' install a new version of the Windows Installer.

  Original title: However, when you try to install the new version I get a message "not enough memory to process the order" I have 812 GB of free memory on my drive C. help!

  In response to an error 80070641 during installation of updates, I uninstalled Windows Installer with the intention to download the updated version and install my updates failed.
  However, when you try to install the new version I get a message "not enough memory to process the order" I have 812 GB of free memory on my C drive.
  Help!

  Hi Derek,.

  Please report the problem to Microsoft Community.

  According to the description, it looks like you get the error when installing a new installer as ' not enough memory to process the order'.

  I have a couple of steps that should help you with this problem.

  Method 1:

  Try these steps and check:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  a. Click Start > run > type regedit and press enter
  b. find the following key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters
  c. find IRPStackSize
  (d) If this value is not right click on key settings and click on new > Dword value and type IRPStackSize under the name.
  e. right click on IRPStackSize and click change
  f. Select decimal , enter a value greater than 15(maximum is 50 decimal), then click on OK.
  g. close the registry editor and restart your computer.

  Method 2:

  Try the steps mentioned in this link and check.

  Not enough memory is available to process this command.

  User action:

  Do one of the following, and then retry the command:

  a. reduce the number of running programs.

  b. remove unwanted files from the disk, the pagefile is on and restart the system.

  c. check the disk paging file for an IO error.

  d. install more memory in the computer.

  Visit the site and check:

  http://TechNet.Microsoft.com/en-us/library/cc978735.aspx

  Method 3:

  I suggest you to clear temporary folders and check if it helps, here are the steps:

  a. click Start, type folder in the search box and press enter.

  b. press the CTRL + A, that will select all the content and Remove it.

  Once you disable this, follow these steps:

  a. click Start, type Temp folder in the start search box and press ENTER.

  b. press the CTRL + A, that will select all the content and Remove it.

  I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

• taking a jra recording on a windows service - 'not enough memory is available.

  
  How can I start a JRA recording on a WebLogic domain run as a windows service?
  
  If I run jrcmd, it doesn't relate the process id. If I look to the top of the process id and run jrcmd on the process id, I get a message:
  "Not enough memory is available to process this command."
  
  The service runs on an administrator account. I am connected with the same credentials. I use jrcmd because the option to make a recording of latency does not appear to me in the form of mission control. I'm using jrmc - 3.0.3 - 1.4.2.
  
  Thank you
  
  

  You can start only records of Mission control latency, if you are using JDK 1.5 +, then you can use jrcmd. I don't know why jrcmd does not work for you, but as a workaround that you can try to start a recording by connecting to the JVM on the network. That's what you have to do:

  (1) JRockit start with -Xmanagement: port = 7090

  (2) Mission control create a connection in the browser of the JVM, start the Management Console and go to the page of the MBean browser

  (3) select the com.jrockit.RMPBean. Select operations and call the operation with the name runCtrlBreakHandler (String handlerName). Enter something similar to this:

  latency filename=c:\myrecordings\recording.jra startjrarecording = true latencythreshold = recordingtime = 30s 20ms

  Cllck OK and wait for the recording to finish. Open the record using the file-> Open

  / Erik

• Tecra M9: not enough memory to run

  Hello

  I have a problem with an application that freezes with messagebox not "enough memory for the operation".
  I repeat, the problem on 7 different model laptop Tecra M9 with configuration: 1024 + 1024 MB RAM with Nvidia NVS130M.

  I tried to change the virtual with ratio 1.5 * ram, 2 * ram memory... and even without virtual memory... every time the same result, when the memory used by file (visible in the Manager of tasks bargraph) occupies about 1.30 GB, the message box appears an application stopped.
  I did a disk defragmentation, checked the Ram, tried the 3 G option in boot.ini, no way.

  Finally, 'just to be sure', I took 1 Bank of Ram of the laptop, and then, with only 1024 MB of Ram, the problem goes away, the Task Manager indicates a value stabilized to used memory (a bit more then 1 GB).

  I don't think it is the right solution for 'downgrade' the size of Ram, if someone already has this kind of problem?

  Thank you in advance

  Hello

  > Finally, 'just to be sure', I took 1 Bank of Ram of the laptop, and then, with only 1024 MB of Ram, the problem goes away, the Task Manager indicates a value stabilized to used memory (a bit more then 1 GB).

  Hmmm, check if you can run Notepad with another RAM module removed.
  I'm not quite sure but it is possible to m the error could be related to a dysfunction of the RAM.

• "not enough memory to complete the operation" when you try to update the USB mouse driver in Windows 7

  USB mouse does not work. Driver must be installed. When trying to update driver get error message "not enough memory for operation of somplete.

  Hello

  1. What is the brand and model of the mouse?
  2. don't you get the same error message when you connect the mouse to a different USB port?

  I suggest you try the steps from the following link:

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-in/Windows7/tips-for-fixing-common-driver-problems

  See also the link:  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  We know if you need help. We will be happy to help you.

• LaserJet P1005: LaserJet P1005 unintentionally print several copies after the decommissioning of 10 of Windows to Windows 7

  My LaserJet P1005 trustworthy priinter was perfectly printing for a few years on my HP TouchSmart 300 running Windows 7 and connected via USB1.  I have upgraded to Windows 10 for two weeks before deciding that he was turning too slowly.  Subsequently, I have downgraded to Windows 7.

  Since the downgrade, the printer has been printing several copies of all documents (eg.  Word, Excel, Web pages).  He prints a copy, waiting (the State indicates a copy pending) and continues to print 3 or 4 future COPs..

  So far, I have tried the following:

  1 deleted and reinstalled the printer P1005 driver.

  2. guarantee that no multiple copies are selected in the options of the software and a printer.

  3. you click Printer Sharing tab in the printer properties.

  I know that's not a printer for the State of the art, but any suggestions on my printer P1005 back to normal would be greatly appreciated.

  Tom

  Hi @Amoeba,

  Welcome to the Forums of HP Support! I see by your post that the printer prints multiple copies of the same document. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Try to clear the record of spool and restart the spooler to print, see if this will help, clear how current Print queue in Windows Vista & Windows 7.

  Please try the steps listed in this document, if the problem persists, HP printers - Print Jobs stuck in the print queue (Windows). They should help this situation. What were the results when you ran the Print and Scan Doctor?

  I used this document to the network printers, you can try it to see if it will help with the USB connection, HP LaserJet Pro P1102w and printers P1606dn - printer continuously prints the same Print Job after it is installed on a network.

  Please let me know the results and if there is anything else I can help you. Thank you.

• black screen in the window of the program after the first pro cs6 update.

  I worked several months without any problems before this update... Now I can not find which version I had before...

  I have a black screen when playing and the screen of the program after the first pro 6.0.3, 6.0.4 cs6 and 6.0.5 update.

  Reading appears when I turn renderer for CPU, but I have tons of projects already rendered GPU and it slowes my work down.

  I can't use 6.0.0 and 6.0.1 because there is no support CUDA for my GT650M and there is no 6.0.2 for Windows

  What am I supposed to do?

  I followed on my Dell 7720 material:

  Windows 7 sp1 64-bit

  CPU i7-3630QM

  16 GB of ram

  Graphics Intel HD 4000

  NVIDIA GeForce GT 650M

  FINALLY I FOUND THE SOLUTION!

  This problem appeared after Premiere Pro cs6 update 6.0.5. and Nvidia graphic drivers at 320... then 331,65. Reading CUDA started working correctly when I reinstalled the graphics drivers Nvidia 307.07 old. It was very unsupposed problem. NEVER DAY drivers and the system until that your projects are completed!

  Thank you very much for the help!

• I can train the UAC? I regularly run several programs and UAC asks EVERY TIME if that's OK.

  I regularly run several programs and UAC asks EVERY TIME if that's OK.

  UAC is designed to collect want programs run without my permission.  Why can't have a list of programs that are allowed to run without hindrance when I'm the one initiating this shit to begin with?

  As far as I KNOW, there are four scenarios in which UAC does not:
  • When it is off (obviously!)
  • When the actions of the programme are not potentially dangerous.
  • When a program is run under a high count.
  • When the program is running under the system account.

  Your statement "UAC is designed to catch programs who want to run without my permission" neglects the main point. UAC is designed to prevent programs from performing potentially dangerous actions such as changing the files/system folders or by editing the registry. In other words, a UAC challenge is never directed to a specific application. She always helps that tries to make a request.

  I think it would be easy for Microsoft create a list of "good guys". I also suspect that it would be just as easy for programs not allowed to populate this list without your knowledge, so beating UAC in no time at all.

• When you try to install Microsoft Pinball Arcade in Windows 7 Home, I try to run setup.exe and the message that is missing a dll.

  original title: pinball arcade problem

  When you try to install Microsoft Pinball Arcade in Windows 7 Home, I try to run setup.exe and the message that is missing a dll.  Help, please. Thank you.

  This file is missing?

  Since it is an old game, it is possible that it will simply not work.

  Try to use the compatibility options to run the installation - the game is designed for Windows 98, but try different options and if that does not work:
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

• If I switch to windows 7, I'll beable to run a program 16-bit legacy that was designed for windows XP?

  If I switch to windows 7, I'll beable to run a program 16-bit legacy that was designed for windows XP?

  There are a number of variables here.  First of all if you go to the 64 bit version of Windows 7, you will not be able to run 16-bit programs in normal mode.  However, if you go to the professional version of Windows 7, you can install the free XP Mode and run 16-bit programs under that.  XP mode runs as a task under Windows 7.  It works fine as long as you can live with the limited graphics.  I have 900 x 600 16-bit color at home.

  If you go with the 32-bit version of Windows, you might be able to run your 16-bit program in compatibility mode.  It depends of course is the compatibility with Windows 7.  Some work and some aren't.  The limitation with the 32-bit version is that it supports more than 4 GB of RAM.

  Good luck.

• [CS5] Run a script on the open document

  Is it possible to run a script automatically whenever a document is open?

  Application has the "beforeOpen" event listener, which won't work, the document is not opened and Document has the "afterOpen" event listener, but which cannot be added until after the document is already open, so I'm not sure was what it serves.

  Any help would be appreciated.

  /Dan

  .. .and document has the "afterOpen" event listener, but will not be added until after the document is already open, so I'm not sure what it serves.

  You can do it-here is an example:

  #targetengine "MyEngine"
  
  var myEventListener = app.eventListeners.add("afterOpen", myDocOpen, false);
  
  function myDocOpen(myEvent)
  {
       var myDoc = app.documents[0];
      myDoc.pages.add(LocationOptions.AT_END);
  }
  

  It is important to use app.documents [0] instead of app.activeDocument when you use the afterOpen event.

  This simple script adds a new page whenever a document is open. Written and tested on CS3, windows.

  Kasyan

  P.S. I just tested on CS5 - it works here as well, but it adds two pages instead of one for a reason any.