Windows XP - SP (2) cannot be updated. WindowsUpdate

Similar Questions

• Windows 7 ultimate RC cannot be updated because of the error code 80072F8F

  Hi all!

  I would like to know why my computer always returns an error when you try to check the updates from Windows Update and Windows Defender. It also cannot download content Microsoft Web sites, so the manual updates are not possible without another computer. I tried many clean installs a copy of Windows 7 RC (build 7100) and the problem occurs even when freshly installed (no third-party software facilities yet). Also, the problem occurred on a previous installation of Windows Vista, where he would show the same error. I have tried many suggestions made by the community here, including changing the time and recording several .dll files, with no luck.

  I have two other computers on the home network and they are both working as expected - flawless updates and downloads of Microsoft. So I think that the problem is related to my computer only, but even after several installs, the problem persists. So is it the material (which I doubt)?

  Thanks in advance for your help - any help/suggestions will be appreciated!

  Did you see this article: http://support.microsoft.com/kb/836941

  0X8024402F

  -2145107921

  WU_E_PT_ECP_SUCCEEDED_WITH_ERRORS

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  These errors can occur caused by one of the following problems:

  • Applications or processes that interfere with Internet communications
  • Problems on your computer
  • Too much activity on the site to update
  • Strong Internet activity
  • Recoverable database errors
  • Problems of timeout server on the Windows Update or Microsoft Update site

  There are a lot of updates released this month, maybe it's a problem of the server timeout.

  Hope this helps to shed some light on your problem.

  TaurArian [MVP] 2005-2010 - Update Services

• Windows 7 Home Premium cannot be updated (error 80070490)

  Hello

  I have a x 64 bit desktop with Windows 7 Home Premium installed.

  I had a moment to try to solve my problem with Windows Update is not be able to install or to look for new updates for months (ask the error code 80070490) and trying to fix it, have caused more problems that I can't fix.

  I have troubleshooted countless times, including the use of update Windows Diagnostic tool (that does not correct the problem of update). I also tried to reinstall Windows 7 Home Premium from the disc, I bought, only to be greeted with an error message containing: "your current version of Windows is more recent than the version that you are trying to level to.» Windows is unable to complete the upgrade. »

  So, I took a dagger blow to scouring the many issues on the Microsoft Answers community that are similar or identical to the problem I have. Some answers have led me to running the sfc/scannow command and also a command "findstr" who has given me a list of files that sfc/scannow could not fix. Some have been classified as "cannot repair" and some more serious labeled "can not reproject corrupted file. My next solution was that I should try to reinstall it from my Windows 7 disc, but try to solve the "current version" problem that prevented me to reinstall earlier. An answer I found in the Community said that SP1 needs to be uninstalled for the resettlement of work, so I uninstalled SP1 and rebooted my computer. I tried to reinstall from my drive again and was greeted with the same error as before: "your current version of Windows is more recent than the version that you are trying to level to.» Windows is unable to complete the upgrade. »

  Now my problems include:

  • Windows cannot update or check for updates
  • There is I don't know how to fix corrupted files
  • SP1 is no longer on my computer and I can't reinstall it

  Thanks for any help. !

  Hi Bridget,

  Thanks for posting your query on the Microsoft Community.

  I understand that you are facing problems with Windows 7. Sorry for the inconvenience caused to you.

  The problem may occur if a file (CBS Manifest) that is needed to install updates is corrupt.

  I suggest you refer to the following Help article Microsoft next and check if it helps.

  http://Windows.Microsoft.com/en-GB/Windows/Windows-Update-error-80070490#1TC=Windows-7

  It will be useful. Get back to us if you need further assistance on related issues of Windows and we will be happy to help you.

  Thank you.

• Windows 7 - internet connection cannot download updates, can be found

  every time I try my Windows, install a program, at the end of the d/l indicates that windows has encountered a problem and stop the installation,

  in the case of protection against viruses, it is said that the internet connection is not found

  in the case of windows upgrade, he says that the internet conection is not found.

  in the case of upgrade of adobe - at the end of the d/l, it says that windows has encountered a prblem and close the whole installation.

  * original title - can not d/l, an upgrade on any of my programs *.

  What Antivirus utility do you use? Have you tried to disable temporarily when you try to download updates?

  Click Start, type: Troubleshooting

  Type: Internet connection in the search box

  Double-click the result and follow the wizard to the screen to see if it will fix the problem.

  HowManage , Configure and troubleshoot Windows updates releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Windows xp, run error & cannot be updated

  Microsoft update or any site constant barrage on the errors of execution is a way to get sp 1? or a way to fix this?

  Follow the instructions in this post of mine in another forum (to-the-letter & in order! ) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Note: The computer must not be connected to the internet or local area network (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

• Windows Xp cannot download updates (error 0 x 80070424)

  original title: Windows Xp cannot download updates

  I am running XP pro sp3 v2002.

  Unable to download windows updates

  I tried all the online diagnostics, does not.

  When I click on windows updates it will here

  http://www.update.Microsoft.com/windowsupdate/v6/default.aspx?ln=en-us

  That seems normal

  Then after that it checks to see if I have the correct update software it goes to the "Welcome to Windows update" screen and asks me to select "express" or "custom".

  I click on "express" and the progress bar starts momentarily for "checking for the latest updates" and then I get this "

  [Error number: 0 x 80070424]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  I tried to launch MS Fixit and I get the message

  "Update of Windows components must be repaired"

  I noticed in the microsoft management console/services that I don't have "Automatic updates" listed. In 1 diagnoses he asked me to check this

  Any help would be appreciated

  Have tried everything you suggested already twice and at least a dozen other patches from microsoft and others, thanks for the good suggestions. Yes, the OS is a registered valid copy.

  Found the fix here from the post of "Mike12. He had the same exact problems and the software I was running.

  http://www.pcmech.com/Forum/Windows-legacy-support-XP-earlier/221106-error-0x80070424.html

  I went to start / run and type in regsvr32 c:\windows\system32\wuaueng.dll and now I can get the updates.

• When I try to update to Firefox, I get a window saying that it cannot be loaded because I don't have all the necessary permissions. What do this mean and what do I do?

  When I try to update to Firefox, I get a window saying that it cannot be loaded because I don't have all the necessary permissions. What do this mean and what do I do?

  If he has problems with the update or the permissions then simpler is to download the full version and trash the version currently installed to do a clean install of the new version.

  Download a new copy of the Firefox program and save the file on the desktop DMG

  • Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Trash the present application Firefox to do a clean (re-) install
  • Install the new version you downloaded

  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Cannot download updates in windows 7 (error 8024402f)

  Cannot download updates in windows 7 (error 8024402f)

  Have you tried troubleshooting running - no error found

  Have you tried to wait 15 minutes to try again - same mistake

  You may encounter temporary connection [e.g. 0x8024402f] errors when you use Windows Update or Microsoft Update to install updates:
  http://support.Microsoft.com/kb/836941

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When I update my Windows XP, I get a message that the 2 updates cannot be updated. Here is the error message

  When I put update of windows xp I receive message 2 updates cannot been done here is what I get = - other hardware - Microsoft HID Non-User Input data filter (KB 911895)
  -Other hardware - Microsoft HID Non - User Input data filter (KB 911895) CAN
  you help me? Thanks when I update my Windows XP, I get a message that the 2 updates cannot be updated.  Here is the Microsoft - other hardware - error message HID Non-User Input data filter (KB 911895)
  Microsoft - other hardware - HID Non-User Input data filter (KB 911895) can you please help me
  André

  Hi MrPeanut,

  Welcome to the Microsoft answers site.

  This problem can occur because the device sends data of strength of signal for Windows. These data can be interpreted as input device real, such as the movement of the mouse, button activity or strikes. Therefore, this transmission can prevent Windows mode 'sleep'. Windows must enter "sleep" mode to activate the screen saver.

  I suggest that you update the drivers for all devices on the computer entry. You can update the drivers from Device Manager and check.

  See the link for update drivers: update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work-good

  If the problem persists, then I suggest that you uninstall the update from Add/Remove programs in the control panel.

  Now, download you the link that resets the update reset Windows components from the following link: How to reset the Windows Update components?: http://support.microsoft.com/kb/971058

  Now start you the Windows updates and check.

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install updates Windows XP error Code 0 X 80070670

  original title: CANNOT INSTALL UPDATES WINDOWS XP ERROR CODE 0 X 80070670

  CONTINUE WITH WHAT?

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• After the format of my old PC windows xp sp1 cannot be updated

  I just formatted my HP PC. Once I used the original disk to format the PC. Now, my PC looks like new. But I can not activate the automatic updates from microsoft. I'm basically a mechanical engineer. I don't know much about computers. I really surprised, I cannot even update my internet explore and can not see the automatic updates of windows. My version of internet explore now shows 6. Its very old. Now update my PC as the latest version of Windows XP. Help, please. My specifications is using MS windows XP Edition version 2002 service Pack 1 family. Mine is HP Pavilion Intel (r) Pentium (R) 4 CPU 3.00 Hz 256 MB of Ram.  So please help me how to upgrade my PC. Thank you. Shankar.

  Manually download Service Pack 2 and Service Pack 3 and install them in this order.  Here are the links to download these service packs as stand-alone install packages:

  SP2: <> http://www.microsoft.com/en-us/download/details.aspx?id=28 >

  SP3: <> http://www.microsoft.com/en-us/download/details.aspx?id=24 >

  If you are unable to download to your computer, try to download from another machine and moving them to your machine to a USB or Flash drive.  Once you're up to SP3, maybe that automatic updates work better.

  Note that 256 MB of RAM is maybe not enough for Windows XP to perform satisfactorily.  You should consider an upgrade of RAM if you plan to keep the machine.

  HTH,
  JW

• Cannot download updates Windows, get the error number: 0 x 80240036

  Had to install the new hard drive and then reinstalled in new PC software through CD obtained from DELL when the machine was first purchased, which includes Windows XP Home Edition.  PC is a Dell Dimension e 310.  Since the upgrade, I could not install Windows updates, get the message that lies beneath.  Using Vipre anti-virus only software.  Please help someone, I tried so many remedies, always with no success.  Thanks in advance.

  [Error number: 0 x 80240036] The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues)

  Hello

  You can follow the suggestions and check out them.

  Method 1

  You can follow the procedure in the article.

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

  http://support.Microsoft.com/kb/883614

  Method 2

  You can reset the Windows Update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Method 3

  You can read the article.

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

  See also:

  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or

  http://support.Microsoft.com/kb/943144

• Windows XP crashed so I rebooted emergency recovery disk and now cannot perform updates.

  Original title: Windows XP Media Edition crashed, I rebooted emergency recovery disk I need to download the updates how?

  How to load XP updates after the failure of the system?

  Hi MrDavidSosa,

  1 manages the Windows XP installation?

  2. are you facing problems with Windows Update?

  3. you receive an error message or error code?

  You can read the following article and check.

  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or

  http://support.Microsoft.com/kb/943144

  Let us know if this information useful.

• Cannot install updates windows xp error: 0x8024400A. Automatic Updates works.

  Original title: I want to update my windows xp but this error. also not automatically update work... Please tell me what I need to do...     [Error number: 0x8024400A]

  I want to update my windows xp but this error. also not automatically update work... Please tell me what I need to do...

  [Error number: 0x8024400A]

  Hi Cécile khan,.

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you consult the site mentioned below:

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

   http://support.microsoft.com/kb/836941.

   

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Manually install updates

  Step 1: Steps to find the update does not install

  a. click Start, click all programsand then click Windows Update or Microsoft Update.

  b. click view update history. A window opens that displays all the updates that are installed and those who have not installed properly on the computer.

  c. in the status column, find the update which do not install and then click on the red X.

  Step 2: Manually download and install the update using the link below:

  http://support.Microsoft.com/downloads

   

  Method 3: Follow the steps listed in the following article to resolve the problem:

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Let us know if that helps.

• Update of Windows XP does not work, error 0 x 80245003. Cannot be updated to SP 3, can't update IE 6 to IE 8. How to solve these problems?

  Update of Windows XP does not work. I tried the correction of the error 0 x 80245003 and nothing has changed. Fix, that it won't work because SP 3 is not installed, because of the Windows Update does not. I try to install SP 3 manually, then downloader windows will not install reference SP 2 must be installed. SP 2 is installed. So I tried several ways to solve this problem, and I keep running into roadblocks of Windows. Help, please.

  Hi my NameJoel,

  See the methods mentioned below and check if that helps.
   
  Method 1:
  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Note: A firewall is software or hardware that checks information coming from the Internet or a network. Then the firewalleither blocks information or allows information to pass to your computer. If the information is blocked or throughdepends spent on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers. Windows XP, Windows XP Service Pack 2 (SP2) and Windows XP Service Pack 3 (SP3) include firewall software.
   
  See also:
  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
  http://support.Microsoft.com/kb/943144
   
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717
  Note: Disable your antivirus software is not usually recommended, some software antivirus prevents certain system changing files. This can cause the Windows XP SP3 installation failure. To make sure that you manage to install Windows XP SP3, temporarily disable your antivirus software, including any third-party antispyware and firewall program. To do this, right-click on the icon for your antivirus program, and then click on disable. The antivirus program icon typically appears in the bottom right corner of the computer screen.
   
  Important: Make sure that you enable the antivirus software after you install Windows XP SP3.
   
  Hope this information helps.