Windows XP SP III, status of the device: a driver (service) for this device has been disabled.

Windows XP SP III, device status: _ a driver (service) for this device has been disabled.  Another driver can provide this functionality. _ (Code 32)

Hello; I use a Windows XP SP III; After I entered a CD in my disc drive, I noticed that nothing was happening. So I try to manually click on the disk drive, noting that he had completely disappeared. After checking the status of the device in Device Manager, I found that this note has come:

A driver (service) for this device has been disabled.  Another driver can provide this functionality. (Code 32). I had removed the device and reinstal it again but still the same.
Information how to fix this problem would be apreciated

Try following the steps for Windows XP in the following MS KB article:

http://support.Microsoft.com/kb/982116

These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

Create a System Restore Point beforehand and restart the computer later.

Tags: Windows

Similar Questions

  • Unable to connect to the Internet using Auntie Photon, it shows the device has been disconnected or is not available when clicking on the button connect

    Original title: Auntie Photon

    Hi all

    I use Auntie Photon on windows platform 8, and it shows the device has been disconnected or is not available when clicking on the button connect. For this reason, I am not able to use internet on my Laptop.I also in contact with the customer service and they told me to take the laptop to any engineer to solve this problem.

    Help, please.

    Hi Varun,

    Thanks for posting on Microsoft Community. I understand that you are not able to connect to the Internet using the dongle Auntie Photon. Let us work together as a team and try to get this fixed number.

    Please help me with the following information related to this issue:

    1. You have installed the required software on your computer which came with Auntie Photon?
    2. Do you see an error or exclamation point in Device Manager when you connect Auntie Photon dongle? See the steps to check:
    • Press Windows Key + X.
    • Select Device Manager.
    • Check if there is no error or exclamation point under Auntie Photon.

    This problem can occur if device drivers are not get detected or due to missing/corrupt device drivers.

    Please follow the steps mentioned below:

    Method 1: Run the hardware troubleshooter

    The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps to run the troubleshooter.

    1. Press Windows key + W on the keyboard.
    2. Type the Troubleshooting in the search bar and press Enter.
    3. In the Troubleshooting window, click show all in the left pane.
    4. Click hardware and devices.
    5. Click right on material and devices and and select run as administrator.
    6. Click Next and follow the on-screen instructions to complete the process troubleshooting.

    If the troubleshooter could not find and fix the problem, I would suggest trying the following method and check.

    Method 2:

    Note: Make sure that the Auntie Photon dongle is plugged.

    Step 1: You can try to uninstall and reinstall the drivers of Auntie Photon and check. Follow these steps:

    1. Press Windows key + X on the screen.
    2. Select Device Manager.
    3. Expand the network adapter and right click on driver and select Uninstall.
    4. Restart the computer.
    5. Windows will automatically load the drivers.

    Step 2:

    You can also try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.

    Windows Update: frequently asked Questions

    You can also get in touch with Auntie Support and check the updates to driver for Windows 8.

    Please answer us on the State of the question to help you further.

  • Source:-elxcna (adapter Emulax CNA) event ID:-129 error:-\Device\RaidPort1, restore the device, has been published.

    Hi all

    Source:-elxcna (adapter Emulax CNA)
    Event ID:-129
    Error:-\Device\RaidPort1, restore the device, has been published.
    Server:-Server Rack, Windows 2008 R2
    Installed application:-installed Backup tool and IBM tape library connected by Cisco nexus switch

    Summary:-each time the backup tool initiating any SCSI command etc. for library of tapes, just after a few minutes in the event log, server shows "restore the device, \Device\RaidPort1, has been issued." and the tape library configured in backup tool disconnected from the physical tape library.

    Up to now steps below was taken but no luck:
    1. test Unit Ready has been disabled in the registry
    2 adapter ANC, fresh of zoning has been replaced.
    3 firmware and driver from the adapter of the ANC has been updated.
    4. timeout was defined according to the guidelines of this document:- http://blogs.msdn.com/b/ntdebugging/archive/2011/05/06/understanding-storage-timeouts-and-event-129-errors.aspx

    Comment:-26 fev 12:00 Am, I put to tape library firmware update and then we got
    This 129 February 26 event id error 03:00.

    Need help? :)

    Hi SabarnaDeb,

    Thanks for posting your query in the Microsoft Community Forums.

    As the question is limited to Rack in Windows 2008 server, it is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support.

    http://social.technet.Microsoft.com/forums/en/category/WindowsServer

    I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

  • \Device\RaidPort0, restore the device, has been published. Event ID: 129 storahci

    Hello

    I have a DELL XPS 13 9343.
    I did a clean install of Windows 10 and downloaded the drivers from dell.com.
    I am also running Hyper-V.
    I'm repeated warnings in my saying system Envent Viewer:

    \Device\RaidPort0, restore the device, has been published.
    Source: storahci

    Just before I get these events my computer freeze for 10-20 seconds and I can´t anything.
    It's very annoying, and I hope there is a fix for this?
    Thanks in advance.

    I had exactly the same problem on a lot of my dell systems. Here is how I solved the problem:

    First we need to change ""AHCI Link Power Management " which is a setting hidden in power management." Open the registry editor and change the following settings.

    HKLM\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\0012ee47-9041-4b5d-9b77-535fba8b1442\0b2d69d7-A2A1-449c-9680-f91c70521c60

    Change 1 to 2 attributes

    HKLM\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\0012ee47-9041-4b5d-9b77-535fba8b1442\dab60367-53fe-4FBC-825e-521d069d2456

    And again change the attributes of 1 to 2.

    Now, go to the Control Panel-> system and security control-> Power Options , click on "Change Plan settings" and then click on "change power avancΘs."

    Now under "Hard disk", you should have AHCI Link Power Management - HIPM/DIPM and AHCI Link Power Management - Adaptive options.


    Change the 'AHCI Link power management' active, meaning that there is no AHCI power management and finally change adaptive to 0 milliseconds (well if you have enabled "active" this option has no effect).

    Finally under "PCI Express" change "Link State Power management" to OFF.

    I hope this will help you.

    Good luck!

  • the device has been disconnected or is not available

    I can detect the modem Huawei E173 usb and install following the instructions, but when I try to connect, watch the device has been disconnected or is not available.

    Help, please!

    Currently, my version of the MacBook has been OS X 1 10.11.4

    its MacBook Pro OS X 10.11.4

  • Standard Enhanced PCI to USB Host Controller: a driver (service) for this device has been disabled. Another driver can provide this functionality. (Code 32)

    How to solve: ' Enhanced Standard PCI to USB Host Controller: a driver (service) for this device has been disabled. "  Another driver can provide this functionality. (Code 32). »

    I hv tried to uninstall, shutdown, then reinstall and also put to day, but all to no avail.

    Just to ensure follow-up on the post of joel S can you check the following registry key, which relates to the USB:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000)

    Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?

    If so, what is 'Data' for these names?

  • A service of driver for this device has been disabled. Another driver can provide this functionality. Code 32 (hard drive problem)

    Hello

    I've just moved a CD into my disc drive and noticed that nothing was happening. I went so manually click on the disc itself, and seen that it was completely gone. When you go through the process of troubleshooting in Windows 7, this note came:

    A driver (service) for this device has been disabled.  Another driver can provide this functionality. (Code 32).

    Obviously, I need to re - activate this service, but I am helpless about who or how. Any help would be appreciated!

    Try the following MS KB article:

    http://support.Microsoft.com/kb/314060

    Try following the steps for Windows Vista, which should also work for Windows 7.

  • Displays error message the problem report for this solution has been deleted or modified on the computer and is no longer available installation multifunction printer

    Original title: solve PC issues icon

    install your all-in-one printer driver, then click on it, then it will take you to a screen that indicates the problem report for this solution has been deleted or changed on this computer and is no longer available. But since it is presented as a problem, it's not going to disappear.

    Hello
    1. What is the brand and model of your computer and the printer?
    2 did you change on your computer before this problem?
    3. the printer is working correctly?

    4. are you clicking on a program from the printer or printer driver file?

    Look for error messages in the device to the printer driver manager.

    a. Click Start.

    (b) in the search box, type Device Manager.

    Follow the suggestions and see if it works very well.
    Method 1
    Check if the problem persists in a clean boot state.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: After a troubleshooting follow step 7: reset the computer to start as usual

    Method 2
    You can uninstall and reinstall the printer and see if it works very well.
    Install a printer
    http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

    See also:
    Find and install printer drivers in Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  • Try to change the wallpaper, it says that this feature has been disabled contact admin system

    original title: wallpaper

    Try to change the wallpaper, it says that this feature has been disabled contact admin, me, system how can I get rid of him?

    If you did not disable the ability to change the desktop background, then you can be infected with some form of malware on your computer. I would recommend that you run that a full and spyware antivirus scan to make sure that your computer is clean.

    Try this:

    1. click on start-> Type on the start search: type gpedit.msc-> press ENTER.
    2. under Local computer policy, expand "User Configuration".
    3. under User Configuration, expand "Administrative Templates".
    4. under administrative templates expand 'Desktop '.
    5. under the desk, click on "Desktop", on the right pane, double-click "wallpaper".
    6. on the "Desktop WallPaper properties" click on the option button "not configured".

    I hope I could help

  • Podcast OGG resume problems when the device has been turned off and on again

    Even if the rocket + is listed as support AAC, it seems it does not support AAC files over a certain length, otherwise some file size.  (Someone, is it a value of its own thread?)

    For this reason, I need to convert some podcasts to another file format before listening.  MediaMonkey standard appears to limit MP3 conversions (but I love the software otherwise) so I thought that I would like to convert it into OGG instead (and OGG seems to have a better rate of compression than MP3 anyway).

    I found it by listening to these podcasts I can pause successfully to create a restore point, and when I come back, it takes up very well, as long as the device has not been driven off the coast between the two.  If the unit has cycled and turn it back on, when I come back to try to resume, it tries (he lists even the index of screen time) but then says "no file type supported" and fails to resume.  I tested on my old Fuze and do not have the same problem.

    Others experiencing the same thing?  I want to make sure that if it is just a simple bug of Sandisk is aware of this and can provide a fix in a future update.

    BTW, I'm using firmware 1.32.00 (latest as of this post).

    This seems to have been fixed with the latest firmware.

  • A driver (service) for this device has been disabled. Another driver can provide this functionality. (Code 32)

    My computer has stopped recognizing all external hard drives.

    He returns constantly with a 32 error code, saying that the disc has been disabled due to problems. I uninstalled and reinstalled two usb ports, I tried ASUS live update but it was a no go as well. I also tried to remove the uppoerfilters and the lowerfilters, but unfortunately, lowerfilters does not exist on my computer.  I'm completely lost, and I don't know if anything else will not work.
    Im not sure of the version of windows on my computer, I use an ASUS zenbook if that helps.

    Hello

    1. what operating system is installed on the computer?

    2 has there been any changes made on the computer before the show?

    3. when exactly you get the error message?

    To determine which version of the Windows operating system is installed, see:

    What version of the operating system Windows am I running?

    http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

    Method 1:

    Check the link and try to run the Microsoft Fix it:

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Method 2:

    I suggest you to disable and re-enable the USB controllers:

    a. click Startand then click run.

    b. type devmgmt.msc, and then click OK. Device Manager opens.

    c. expand Bus USB controllers.
    Note: You need to scroll the list to find this point.

    d. right-click the first USB controller under USB Bus controllersand then click Uninstall to remove it.

    e. Repeat step 4 for each USB controller is listed under Bus USB controllers.

    Note: restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  • Problems with background due to the error screen change "this feature has been disabled. For more information, contact your administrator"

    When I try to change my wallpaper, I get a message indicating that the feature has been disabled.  Why is this and how can I solve this problem? It says to contact the system administrator for more details.

    Hi Sara Myers,.

    (1) have you been able to change the wallpaper earlier?

    (2) do you use the computer as an administrator?

    You can follow the steps given by Daniel Martín in the link below, dealing with a similar issue

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/restricted-access-to-wallpaper-changes/065faa71-cbb3-435e-839a-0720a72c3548

    (The steps described in the link above works fine for Windows Vista as well)


    Important
    this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
    How to back up and restore the registry in Windows

  • AMD core processor a driver for this device has been disabled. Another driver can provide this functionality (code 32).

    I' not seen something very speaks of the processor.  The same steps apply?

    Hello

    Please contact Microsoft Community.

    This problem may be caused, if an engine control unit notified the operating system that the device has failed in some way.

    •  What is the exact model of the AMD card?

    I suggest you follow the steps mentioned in the link below:

    https://support.Microsoft.com/en-us/KB/310123#32

    Also I suggest refer you to the section: the common resolutions to run the troubleshooter on top of link and check if it helps.

    Hope this information was helpful and let us know if you need more assistance. We will be happy to help.

  • the sound software is not installed properly or has been disabled

    Hi, I have windows 7 and I try to run a program called history of eyewitness to the world its GSP or dorling kindersley, I get the error message saying the sound software is not installed or has been disabled.

    See:

    Tips for solving common audio problems
    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

    No sound in Windows
    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  • Omen of HP 15-5000na: \Device\RaidPort1, restore the device, has been published.

    Hello

    My computer laptop freezing from time to time for 15-20 seconds (about 8 - 9 times per hour). When the gel it is impossible to make any disc operation, that is, open the file, or start the Explorer... the disk in the Task Manager activity is 100% reading.

    The only thing I found suspicious is a message in the event viewer / newspapers Windows / system that says:

    -------------8<--------------------------

    Source storahci

    Event ID: 129

    Text is: restore the device, \Device\RaidPort1, has been published.

    -------------8<--------------------------

    I search on google for that matter. I have set up my power plan high performance with settings for "PCI Express" / link state power management 'Off' (was befor change moderate energy economy)

    But this has no effect portable stell gel.

    I have no other choice for any type of RAID in my BIOS and my HARD drive is SanDisk SD6PP4M - 256 G-1006.

    SanDisk dashboard software indicates that the SSD is O.K.

    Windows 10 updates and drivers are up to date, also I flashed the BIOS to the latest version

    Any ideas how to solve this annoying gel are welcome, I will try all of them.

    Kind regards

    spetrov

    Hi go2.

    Thank you very much for the detailed information.

    I installed the hp support assistant and this software updated my drivers for more later you mentioned in you post.

    I can't find how to rebuild my raid (which I don't have) in the Intel Rapid technology software, there are only a few options awailable in this software and none of them can be used to rebuild the raid.

    However, I managed to solve this problem with the activation of additional options for power plan settings for hard drive

    named "AHCI Link Power Management - HIPM/DIPM" registry and then, after that the options are visible in the settings of the power plan, set options for DIPM (HIPM is not taken in charge of my hard drive).

    This link provides information how to activate this option of additional hard drive in the power plan settings and how to change them.

    http://www.SevenForums.com/tutorials/177819-AHCI-link-power-management-enable-hipm-DIPM.html

    Best regards, spetrov

Maybe you are looking for