Windows XP SP3 update (maintains just to check the latest updates...)

Similar Questions

• Windows XP SP3 update

  I try to update windows XP sp3. He tells me that the update of the components must be repaired I ran windows that work not adapt it

  Russ,

  Run the link Fix It, you will find on this http://support.microsoft.com/mats/system_maintenance_for_windows/en-us>>, this diagnostic tool automatically fixes common problems.

  http://www.Microsoft.com/genuine/diag/>

  Restart and test.

  If the problem persists, follow the steps described in the fix it for me article article from Microsoft which are at this link http://support.microsoft.com/kb/971058>, with these steps restores the Windows Components update.

  UTC/GMT is 17:14 Thursday, October 18, 2012

• Check the latest version shows needs update, try to update and it says that it is already up to date.

  Check the latest version shows needs update, try to update and it says that it is already up to date.

  Note This ASK tells me a question like that already exist, which I had already checked, so I click on show me and it says nothing found.

  I restarted the browser, even said the PC is a good PC, but still get the same result.

  Solution would be appreciated.

  H

  What is the exact version you have today?

  What you said an update is necessary?

• I instaled Windows 7 64-bit Enterprise edition and installed the latest version of Firefox and it freezes every time that I run. Please help me.

  I instaled Windows 7 64-bit Enterprise edition and installed the latest version of Firefox and it freezes every time that I run. Please help me.

  4d4aae27-34ee-4620-b349-c03002813b2003-Jan-1312:30 AM

  54e24e0e-dfc4-466b-A347-4bd95536773e03-Jan-1312:30 AM

  22d351d2-6461-4F33-9FBD-6d31f769e73103-Jan-1312:30 AM

  8a8da99b-335e-43bb-AA12-4634aa0b431003-Jan-1312:30 AM

  A15bb095-aeb9-44E1-A79C-1a17cee207d503-Jan-1312:28 AM

  A few videos that use the Flash plugin contain a menu entry in the context menu that allows to disable hardware acceleration in flash player.

  To disable the mode you will need to edit the file C:\Windows\SysWOW64\Macromed\Flash\mms.cfg as explained in the knowledge base article protected.

  • http://KB.mozillazine.org/Flash#Disabling_Protected_Mode_in_Flash_11.3

  See also: how to solve the safe_mode of Flash Player for Firefox? :

  • http://forums.Adobe.com/message/4468493

• cc of Photoshop does not open JPEG - error message "file not found" just upgraded to the latest version of photohop cc

  cc of Photoshop does not open JPEG - error message "file not found" just upgraded to the latest version of photohop cc

  I just replaced my 9.5 Raw camera with Camera Raw 9.4, from this page:

  Camera Raw installation of Adobe Photoshop CC and CS6 program

  It worked, now I'm back in business!

  PS. along the way, I installed Camera Raw 8.3 (manual drag-and - déposer), in response to advice on a pretty old thread, and that worked as well.

• Windows xp sp3 update error 0 x 80070005 access denied

  Try to update Win XP2 XP3 Win.  After download and installation failed, got the error msg 0 x 80070005.  Can't fing solution error code.  Help, please.

  How long the machine was not installed SP3?
  (It could be infested/infected/etc.)

  In any case, what I suggest is to prepare the machine for the update...

  • Steps to take before you install Windows XP Service Pack 3
  • Windows XP SP3 - read all the prerequisites for a successful installation

  Chancing some repetative tasks... Maybe just do the following:

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * SHOULD * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Download here all the SP3 Setup file: Windows XP Service Pack 3 Package of Network Installation for developers and information technology professionals and save it to the Office of the administrator of the user account on the computer in question.

  Reset.

  Double-click the installation file downloaded in step above and follow the instructions.

• return address bar in Explorer windows after sp3 update, how?

  How, after the windows xp pro sp3 update, return address bar in the task bar?  Thanks for the reply.

  Hi LuidiZ57a

  
  You can use the steps below and check if these help -.

  a. right click on a zone empty of the taskbar b. point to toolbars, and then click the toolbar you want to add. -The address bar allows you to quickly access any Web page you specify. Open the address bar by double-clicking it. See below the help link-

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/win_tray_toolbar_add.mspx?mfr=true

   

  I hope this helps.

• Error message "the website has encountered a problem and cannot display the page" when you try to install Windows XP SP3 update

  Original title: cannot use Windows Update to install Windows XP SP3

  I have done a complete reinstallation of Windows XP Pro from the original disc and managed to update to SP2.  However, when I tried to upgrade to SP3, I got an error that "the site has encountered a problem and cannot display the page.  I tried all the suggested fixes that I can find.

  During the last attempt, I discovered that several dll is missing.  Here's the msxml6.dll, wups2.dll, c:\windows\system32\wucltux.dll and c:\windows\system32\wuwebv.dll.  If they are critical, where can I find them, and how do I get support.

  In addition, mshtml.dll is available, but the DllRegisterServer could not find an entry point.  Is this critical?

  In any case, I still can I install Microsoft Update or download/install SP3.

  The computer is an IBM R50e laptop.

  Thanks for any help you can give.

  Try to run this tool to windows update. This will help to re-register the dll

  After its done. try again and do the update

  hope this helps

• Windows xp sp3 update problem

  I had to redo my office and I have windows xp sp1 and now I went to windows update and now there is no available update because I have not sp3. I'm having a little problem finding. I searched the net and found one but it says do not download if install on 1 pc. It's only for pc multi for networking. I hope someone can help me please thank you very much.

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  The space of hard disk required for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947311

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Windows XP Service Pack 3 - file to Image CD ISO-9660:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2FCDE6CE-B5FB-4488-8C50-FE22559D164E&displaylang=en

  Windows XP Service Pack 3 Installation Package for it professionals and developers network (unique facilities for the PC can use the same file)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

• Windows XP svchost.exe problems. Cannot find the latest updates for windows xp.

  Hello, this is my first time on the Microsoft Community page.

  I have a very strange problem with automatic updates svchost.exe and windows. I know that automatic update of windows, has been known to cause problems on XP and there is thus CPU utilization of memory leaks. Last night, I tried to install the latest windows XP updates, with automatic tool. The tool hanged during the process. Not sure why exactly. I never had a problem with it. I've been running Xp SP 3 for more than five years. In any case, I rebooted my system and checked to see if the updates actually treatment. They do not have. Then I went to the windowsupdate.microsoft site. I was trying to these updates. The scan never completed, he just constantly checked, for about 45 minutes. I decided to do some research. I found the C:\Windows\SoftwareDistribution folder "fix" online. He kicked, I renamed the file. And then disabled auto updates and restarted my computer. After windows starts, I re-activated automatic updates and waited. Nothing happened, so I did some research more. I noticed that svchost.exe uses about 25% the use of the processor. Normally my treated systemidle is 99%. I used Process explore and isolated the wuauclt.exe under the svchost.exe file. When I disable automatic updates executable, it is up to a full 99%.

  I'm not sure why it uses 25%, when I look at the actual use of the memory for the wuauclt.exe, it is only using about 17 k of memory. Which is quite low. I have not turned on microsoft update, starting in the configurations of parameters at windowsupdate. I know that in the past, that has been a problem and swallowed up system resources.

  Any advice would be helpful. Thank you in advance.

  There are a lot of threads on this forum - and many others - this problem - just try to do a Google search for UPDATES of XP SVCHOST - hits now more than 8 million.

  But to save you the trouble of tracking down the fix OK here is the short version

  1. disable automatic updates using Control Panel icon

  2. restart the computer - SVCHOST is now not going crazy

  3. check which version of Internet Explorer you have installed IE8, IE7 or IE6

  4. download and install - the links below - the good update for Internet Explorer.

  Assuming you have Windows XP 32 bits here are the direct download links:

  IE8: IE8-WindowsXP-KB2898785 - x 86 - ENU.exe
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=41404

  IE7: IE7-WindowsXP-KB2898785 - x 86 - ENU.exe
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=41442

  IE6: WindowsXP-KB2898785 - x 86 - ENU.exe
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=41458

  5. Once installed, you can reactivate the automatic updates and using Windows Update.

  Note: The bug also affects access via Windows/Microsoft Update Web site.

  KB2898785 is the "Cumulative Security Update for Internet Explorer" (December 10, 2013)

  There is a bug in the function of automatic update under XP running the SVCHOST process at full CPU load (100% or 50% or 25% depending on the number of CPU cores you have). If you have a Quad core CPU the bug works the CPU at 25% (a carrot out of four) and eventually battles through a conclusion - but if your computer is a single old Celeron or Pentium bug works the CPU chip at 100% load for many, many h/solid.

  Faster your processor and RAM than you seem to make a radical difference to the actual times are waiting for you maybe search for updates complete. Most of the old core systems were never designed to deal with this kind of situation and can easily overheat. This is especially true of laptops and desktop systems older where the radiator can be partially blocked with fluff and hairs of animals - which could cause blockages or stops!

  Microsoft said last month that the updates of Internet Explorer are treated differently from all the other updates - which is originally the XP update engine run so slowly as to appear frozen. If the update service finds that you don't have the latest version of IE that is currently available, it starts to search the entire tree of updates of IE to see what it takes - rather than offering just the cumulative current update for your system.

  But if you manually install the update yourself update Internet Explorer service is fully updated and is not search for updates of IE. But until Ms. fix it will still occur whenever a new update is published.

  MS said that intend to prune the IE updates database so that only the main cumulative updates have been offered when a search has been launched - it did not in time for the update as it should of November and obviously has not arrived or worked either in time for the December Update!

  MS say they hope to have a fix before the January updates are released (Patch Tuesday) - that the problem will be activated once the next update Cumulative of IE is released.

• How to make windows XP SP3 display Chinese characters correctly in the programs?

  I am running Windows XP SP3 and I need Chinese language to view a program. (in Windows 2000 it displays very well) I installed East Asian language packs and the Chinese buttons now display gibberish. Y at - it installation work best for the language to Chinese? I went in the section advanced and made sure everything I checked options Chinese had it but still the same... I followed the links to "install files for East Asian without CD-ROM.
  http://forums.techarena.in/Windows-XP-support/873146.htm"but that doesn't give me what I have on XP SP3 ORIGINAL CD. Y at - it a fix for this or is the police by default for windows is not compatible with the Chinese language?

  Please help and if you could not mark as 'responded' unless you actually answer my question.

  Just in case where U ignored my above features:
  Windows XP with SP3.
  Already installed the files for East Asian CD and download.
  At the default font on the desktop.

  Ok... I thought about it, you must set your "format" in the regional settings in the option "Chinese (simplified, PRC) ' for the installed language pack to work for Chinese characters. My programs now display the correct characters. I imagine that by selecting the right 'Format' to use will help out with all the other languages also.

  FYI: I had to do that very thing on a machine Windows 7 has not been posted by the correct characters. I fixed it the same way :-)

• Failed to upgrade 10 Windows v3-772 - initialize not just crashes with the acer logo screen

  Hi guys

  I just had my computer repair and the SSD has been changed. I was running 10 before windows and everything was perfect until an update in ruins everything. Long history does not in this

  In any case I unstall all my software and do an update to windows 10. All the preparations and thus seems to be okay. Then it restarts and is stuck. Never of shots. I see the low activity of the HARD drive, but I let it run for 8 hours and still nothing, always gangs in the acer start window. It's once the bios loaded, because I can access that I'm fast and press f2.

  After a while, I gave up and thought maybe it was just a fluke, so I used my recovery dvd and reinstalled my system and the Agency and the outlook and... After the installation of about 5 hours, my system was ready to go. So I decided lets try again. And once again same failure. Just crashes with the Logo of Acer.

  I called Microsoft and they told to do me a startup repair. However it is not possible, I can get it in the repair mode, but none of the functions to work. Then they said that it was a material thing, but everywhere I look States the v3-772 should have no problem with the windows 10.

  I'm normally pretty good to fix my own problems, but in order to fix a problem I need a mistake or error code or something to go for. Does anyone have an idea what to do?

  ncmohr,

  I'm not completely sure what is the problem, but I'll tell you this.  When I look at Windows 10 drivers of Acer and BIOS for your computer model and see that there are some drivers Windows 8 and an old BIOS, it's really bad... especially if you try to get Windows 10 anniversary of working on your computer.

  I don't have the model of your computer, but I'll give you a bunch of links that may or may not help you get a version of Windows 10 installed on your computer.

  http://community.Acer.com/T5/V-and-VN-series-laptops/Acer-Aspire-v3-772-Windows-8-1-clean-install/TD...

  http://community.Acer.com/T5/Windows-10/Acer-Aspire-ES1-111M-cannot-install-Windows-10/m-p/460183#M4...

  https://www.heidoc.NET/Joomla/technology-science/Microsoft/67-Microsoft-Windows-and-Office-ISO-downl...

  https://Rufus.AKEO.IE/

  http://www.Acer.com/AC/en/us/content/Windows10-update

  http://www.Acer.com/AC/en/us/content/drivers

  ---------------------------------------------------------------------------------------------------------------------------------

  If you try to do a upgrade "on-site" Windows 8 for Windows 10 anniversary, then the link below and picture below might help... but I doubt it.

  https://www.Microsoft.com/en-us/software-download/Windows10

  

  Edit: I don't know if you should be using the drivers on the Acer website to download or just use the updated drivers that Windows automatically gives you.  Or a combination of both.  Try to start with the drivers Microsoft gives you automatically.  It could take hours for you to understand... Unfortunately.

  Edit2: On the Acer Web site, they gave you windows driver chipset 8.1 and Intel Management Engine Interface driver. And I suspect that the reason that they did is because they don't have to update your BIOS.

• Running Windows XP - SP3. Power light flashes and the fan motor is running but no video to monitor input

  Original title: MY PC has CRASHED or?  Windows XP - SP3

  Running Windows XP - SP3.  Power light is flashing and the fan motor is running but no video input for monitor and no power to the keyboard.  I tried another monitor, but still no video input.  I wonder if the motherboard went wrong or what happened.  Thanks for any help.  Pat J

  Hello

  Since there is no power for the keyboard and monitor, the issue seems to be with the material. I suggest that get you in touch with the hardware manufacturer for further assistance on the issue.

• Windows XP SP3 system crashes when you unplug the USB device

  the user has a laptop Dell Latitude D630 under Windows XP SP3.  In the last 2 weeks, the laptop started to hang when it unplug a USB device.  Click on the system tray icon to remove the device but the system gives breaks down.  That's all the info I have at this point.  What should I look for?  Does anyone have ideas on how to solve?  Thank you.

  How to crash the system?

  What is a blue screen crash?

  If so, it can help to look at the files minidump against accidents with a debugger.

  Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

  In addition, you do not necessarily have compress the minidump files, you can download one at a time.

• In obtaining Windows XP SP3 notice of high utilization of the processor, but do not know the cause

  I keep having problems with high CPU usage, but I don't know what is the cause. I know Norton has sent me a few messages on dumprep.exe high utilization of the processor, but this isn't the only time where she do this and it is causing my computer runs slowly, and a few times the last 2 days that makes my strongest computer. I hope someone can help because I don't know anything about all this

  Hi SandieLaster,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. When the high CPU usage occurs?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.