Windows XP updates has not installed (2 items) - error 0x87FF0004 when you install KB936929 and update security for Windows XP

Similar Questions

• "Credentials - has not verified the credentials of home" when you install Oracle capture the workload

  Hello.

  Trying to implement capture them the workload for the Replay in OEM Service, I get the following error issued when you try to enter the credentials of the host:

  The host credentials -Impossible to verify the identification information.

  
  

  The password is correct, and I can of course connect to the Linux box using this username / pwd.
  

  
  

  However, I can do this successfully with a LIVE of OEM installation. I compared the two users and see no difference. Did I miss something on the side of things OEM?

  
  

  DB Console: 11.2.0.2.0

  DB: 11.2.0.2

  RHEL 5.5

  
  

  Thank you.
  

  I found the problem: some errors were carefully hidden in DBCONSOLE. Sometimes I had to run root.sh. Seems to work now

  NMO not setuid root (Unix only). Run the root.sh script and fix the problem

  snmhsutl.c:executable NMHSS should have the active suid root

• 80070005 error code when you try to download a security update help please it just does not load?

  a cumlative update is available for IE8, but after several times it will not be updated. I tried help and shut down my firewall etc but nothing works. Tried since June 17. Download of IE 9 is available but I think that because the security update is missing it will not charge it either - Helllllllllllp?

  Hello

  1. did you try to install the update manually?

  2. what happens when you try to install IE 9?

  You can read the following article and try the steps and check if you can install the update:

  Error message when you use Microsoft Update or Windows Update Web sites to install updates on Windows 2000, Windows XP and Windows Server 2003: 0 x 80070005

  Note: Applies to Windows Vista.

  You can try to download and install the stand-alone package of Internet Explorer 9 and check.

  Download Internet Explorer 9

  You can also check out the article below and check.

  Solve the problems when you can't install Internet Explorer 9

  Hope this information is useful.

• Message window "Not connected to the internet" appears when you have MS and downloads updates.

  Whenever I try to use Windows Update or download MSE I tells me that my computer is not connected to the internet.  My web browser works fine, only when updating or loading of a product of MS IE. Silverlight, LifeCam, MSE...

  I have not done the clean boot - no good

  I tried to add tusted sites - not good

  I disabled and deleted some security I could find - no good

  This is a brand new machine - Dell Studio XPS with Windows 7 installed.  No Malware or Spyware that I see.  Help, please.

  Q: you have no anti-virus application installed now?
  A: No.

  You see the effects of a hijackware infection. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Win7: see "using the custom installation option" and formatting the hard drive section of http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7

  NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  IMPORTANT! -Online any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate before installing updates or IE upgrades AND BEFORE installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
  http://www.us-cert.gov/CAs/tips/ST05-007.html

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/w7repair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Receive error message when you open Outlook; the path specified for the file G:\outlook...pst is not valid.

  I recently exported my outlook to a pst file and saved on my external hard drive.  Since then I get this message when I open Outlook "the path specified for the file G:\outlook...pst is not valid.  How to stop?

  NEVER use the. Functions of export/import PST in Outlook.  They are broken, have been for some time, data loss and often corrupt Outlook profile in use. To perform a backup, just close Outlook and make a COPY of the. PST file.  Looks like (and I guess here) your external HD is G:\. This being the case, that. PST file is probably still attached to Outlook and Outlook can't find it.  With Outlook open, see the supplement files pane. PST file, right-click, and then click "close".  You may need to have the hard drive external and exported. File PST attached and available for work.  If this does not work, you have damaged your profile and will need to make a new one:

  How to create and configure an e-mail profile in Outlook 2007 and in Outlook 2003

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• Layout error 0x800ccc79 when you try to send an attachment for Windows Live Mail.

  Solution to ship a small accessory.

  I tried to post a very small attachment with about 50 KB.  Had this error...

  The message could not be sent. The setting for your outgoing e-mail [SMTP] Server may need to be configured. To find the server to "" settings, contact your e-mail service provider.

  Subject 'Test email for Koenig documents '.
  Server error: 555
  Server response: 555 5.5.2 Syntax error. a11sm10831668ibg.3
  Server: 'smtp.gmail.com. '
  Windows Live Mail error ID: 0x800CCC79
  Protocol: SMTP
  Port: 465
  Secure (SSL): Yes

  Windows 7

  Kaspersky Antivirus

  Using Windows Live Mail

  Thank you.

  1: Make sure that Kaspersky will not email, scan in or out.

  2: see if everything is set up the way it should be.

  Activation of POP in your Gmail account
  http://mail.Google.com/support/bin/answer.py?answer=13273

  How to configure Gmail in Windows Mail & Windows Live Mail
  http://mail.Google.com/support/bin/answer.py?answer=86383

  If you need help, please ask the experts in the Windows Live Mail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=15

• Creating cloud has not installed correctly, but it won't let me uninstall it now either

  Tried to install creative cloud this week on adobe.com on my Mac (13 ' retina - fundamentally new powerbook) running Yosemite 10.10.1

  Unfortunately, it has not installed correctly, and now it does not appear as an application however it does not appear as an icon in the upper right.

  Tried to run the unistaller provided with the download and via the Mac utilities however it is active and to close first.

  The problem is if you go to force quit it don't think it is running / does not display it is running.

  Can anyone help?

  You can contraintsde the activity monitor process.

  Finder > Application > utilities > Activity Monitor.

  After the end of the process, you can try to reinstall.

• Could not update security for Microsoft Office 2003 (KB2584052)

  For some reason any my laptop win XP will not install the 'day of security for Microsoft Office 2003 (KB2584052)"someone knows why this will not be installed?

  Hello

  1. Did you of recent changes to the system before the show?
  2. You are able to install other updates to Windows?

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Restart the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  http://www.Microsoft.com/download/en/details.aspx?ID=27390

  Method 4: Reset windows update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 5: Follow the steps in the article.

  How to troubleshoot incidents to update your installation of Office on the Office Update Web site

  http://support.Microsoft.com/kb/304498

• Issue to receive the error message "the system has recovered from a serious error" while working on the computer and the computer restarts automatically.

  Original title: The system has recovered from a serious error-

  The system has recovered from a serious error-

  When you work in windows xp home edition, whenever this programe message and stop running and some auto restart machine.

  What is the solution for this?

  Hi Sandeep,

  Thanks for posting your question in the Microsoft Community forum.
  It seems that you have a problem with the error message "the system has recovered from a serious error," while working on the computer, and the computer restarts automatically.
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  I may need a few more details to better understand the issue.
  Method 1: I suggest following the steps listed in the article and check if it works.
  Error message: the system has recovered from a serious problem
  http://support.Microsoft.com/kb/316424

  Method 2:
  I suggest you analyze your computer by using the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.
  You can see the article for more information:

  A "System has recovered from a serious error" message after every restart.

  http://support.Microsoft.com/kb/317277

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• last 10 automatic updates has not installed on my system; windows xp x 86 service

  last 10 automatic updates has not installed on my system; windows xp x 86 service

  jump,
  We could use a little more information.  What updates fail and the error codes are, to start.
  However you can check these links because they have some general troubleshooting steps that may help you.

  Reset the Windows Update components

  Solve Windows Update installation issues

  Troubleshooting Windows Update: offered on several occasions to update

  Last Windows Update Agent

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message "the file wmp.dll has a version number of 11.0.5721.5280 where 11.0.5721.5268 was expected. Windows Media Player is not installed correctly and must be reinstalled.

  Original title: I need the Windows Media Player for WinXP 32 bit.

  Recently when I tried to play an Audio CD using Media Player, I get the following message: "the file wmp.dll has a version number of 11.0.5721.5280 where 11.0.5721.5268 was expected. Windows Media Player is not installed correctly and must be reinstalled. You want to install the player from the Microsoft website? "When I clicked 'Yes', the window get Window Media Player appeared that lists the different versions of the operating system Windows however, in the category Windows XP, only the 64-bit version has been registered and I need the Windows XP 32-bit version. Anyone know where I can get the 32 bit version?

  Hi donsor,

  You did it of any material changes or software on the computer before this problem?

  You can follow this link & check if the problem persists.

  After the WMP update you an error of wmploc.dll on version number incorrect

  
  Reference: Windows Media Player is not properly installed and needs to be reinstalled

  Hope the helps of information.
  Please post back and we do know.

• I have two probs with download of updates on my windows 7 do not install 80073712 and 64 c How can I fix this__Thomas turton

  two probs on downloading update 80073712 and 64 c

  The "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive the "0 x 80073712" error code when you try to use Windows Update
  http://support.Microsoft.com/kb/931712 TaurArian [MVP] 2005-2011 - Update Services

• Update security for windows xp KB 975560 have not installed

  How to install this update?

  MS10-013: Description of the security for the Quartz update: February 9, 2010
  http://support.Microsoft.com/kb/975560
   

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  
  --
  Martin Stanley
  MS - MVP
  --
  How to ask Questions the Smart way
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• 80073701 error code when you try to install KB2378111 update on Windows Vista

  When you try to install the update KB237811 on Vista 32-bit, I said it has installed successfully, but I have to restart my computer.  After the reboot, I get a message that the installation has NOT been successful.  I tried to install this update three times, and I still get the same error code: 80073701.

  See the section "How to get help" of http://support.microsoft.com/kb/2378111

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Start a free Windows Update support incident email request:

  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

• cannot install update security for Windows XP (KB2686509)

  cannot install update security for Windows XP (KB2686509)

  Hello, gsfl Jg,

  Open Windows Update and check if KB2686509 and KB2676562 are or are not installed.

  When you tried to install the update, you would have received an error code.  Please return this zip code which lies in Windows Update.

  Why this update is offered again several times?

  Windows updates are revived until the update is installed on your computer. If this update is already, perhaps an installation failure has occurred. Check log files to install KB for the error codes. For example, the log file of installation KB for this security update would probably "C:\Windows\ KB2686509.log"
  For more information about how to resolve these problems, click on the number below to view the article in the Microsoft Knowledge Base:

  958051 (http://support.microsoft.com/kb/958051/) you receive a "0x8007F0F4" error code when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site

  What should I do if the installation of this update fails with the error "0x8007F0F4"?

  If you receive the "0x8007F0F4" error when you try to install this security update, follow these steps:

  1. Open the Faultykeyboard.log file that is located in the folder %windir%. This log file contains information about the registered keyboard layout files that are not in the folder % Windir%\System32. The log file will resemble the following:
     Keyboard1.dll.\Layoutfiles\keyboard2.dll C:\Windows\System\Kbda1.dll

     Note In this example, the first entry is just a file name. The second entry includes a relative path with the name of the file. The third category includes a full path of the file.

  2. Copy the files that are listed in the Faultykeyboard.log log file in the System32 folder.

  Note Contact Microsoft technical support if you can't find the Faultykeyboard.log file.

  http://support.Microsoft.com/kb/2686509